|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2023-07-19
|
|
1 2 3
|
Applicant's complete, legal business name |
InVue Security Products, Inc.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0024509010
|
|
1 2 3
|
Physical Address |
9201 Baybrook Ln
|
|
1 2 3
|
Charlotte, NC
|
|
1 2 3
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
b******@baclcorp.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AFR8
|
|
1 2 3
|
Equipment Product Code |
M7DB7
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
E**** B******
|
|
1 2 3
|
Telephone Number |
70475******** Extension:
|
|
1 2 3
|
Fax Number |
70475********
|
|
1 2 3
|
E-mail |
f******@invue.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/15/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Dual Band SIP Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Change in Identification |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| 1 2 3 | Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| 1 2 3 | Modular approval. Output power listed is peak conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Bay Area Compliance Laboratories Corp.(Linkou Lab)
|
|
1 2 3
|
Name |
G**** T****
|
|
1 2 3
|
Telephone Number |
886-3******** Extension:
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
E-mail |
g******@baclcorp.com
|
|