FCC ID: 2AFR8-P05BRLT Watch Sensor Bracelet

USER MANUAL P05BRLT WATCH CHARGING STAND FCC:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

Lappareil ne doit pas produire de brouillage;

Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) Please refer to the individual components, component product packaging, user manual, or company website for a comprehensive list of required and permitted compliance markings.

Date: 03/20/2024 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing Re. KDB 986446 D01 FCC ID: 2AFR8-P05BRLT Dear Sir or Madam, InVue Security Products, Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please contact us. Sincerely, Contact name: Rob Spadafore Company name: InVue Address:9201 Baybrook Lane, Charlotte, NC USA E-mail: robspadafore@invue.com Tel: 704-752-6513 QA-FR-172-A

To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-20-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AFR8-P05BRLT InVue Security Products, Inc., certifies that, as of the date of the filing of the application, InVue Security Products, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. InVue Security Products, Inc. agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. InVue Security Products, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: InVue Security Products, Inc. Address: 9201 Baybrook Lane, Charlotte, NC 28277 Contact Person: Rob Spadafore Tel.: +1 704 752 6513 Email: robspadafore@invue.com FRN: 0024509010 Sincerely, Applicant name Applicant printed name Applicant signature InVue Security Products, Inc. Rob Spadafore QA-FR-172-A

Agent Authorization Letter Date 03/19/2024, TUV SUD America Inc. 401 Edgewater Drive Ste 500 Wakefield MA 01880 Dear Sir or Madam, We, InVue Security Products, Inc. located at 9201 Baybrook Lane, Charlotte, North Carolina 28277, hereby authorize Rossana Sarai of TUV SUD America, 5945 Cabot Parkway, Alpharetta, GA 30005 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters for the model listed below:

Product Type: Watch display and charging stand Model: P05BRLT Yours sincerely, Name: Rob Spadafore Title: Compliance Engineer QA-FR-189-B 2/25/2016

FCC Confidential Authorization Date: 03/19/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID: 2AFR8-P05BRLT Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, InVue Security Products, Inc. hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name: Rob Spadafore Title: Compliance Engineer QA-FR-172-A