all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.59 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.59 MiB |
Air LP System Quickstart Guide English ( 2 8 ) Gua de inicio rpido Espaol ( 9 15 ) Guide d'utilisation rapide Franais ( 16 22 ) Guida rapida Italiano ( 23 29 ) Schnellstart-Anleitung Deutsch ( 30 36 ) Snelstartgids Nederlands ( 37 43 ) Quickstart Guide (English) Introduction Box Contents Make sure that the items listed below are included in the box:
Air LP Air LP Speaker Air LP Power Adapter Air LP Speaker Power Adapter Dust Cover USB Cable RCA Cable 1/8 (3.5 mm) Aux Cable 45 RPM Adapter Felt Slipmat Software CD Quickstart Guide Safety & Warranty Manual Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. Connection Diagram Items not listed under the Box Contents are sold separately. Air LP Features Air LP Speaker Music Device
(optional) Power 1. Platter Place your record here. 2. 45 RPM Adapter Holder Holds the included 45 RPM adapter. When not using the adapter, please place it in this holder. 3. Tonearm The fixed tonearm can be raised and lowered by hand, or by pressing the raise / lower lever. 4. Arm Clip This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked. 2 2 3 1 4 5 6 7 9 11 10 8 6. 5. Raise / Lower Lever Raises and lowers the tonearm. 33 / 45 / 78 Switch This switch controls the RPM of the turntable platter. Note: For best results when playing 78 RPM vinyl records, use a 78 stylus (sold separately). Only use a 78 stylus with 78 RPM vinyl records. Purchase at ionaudio.com/ict06rs. iCT06rs stylus the 78 14 16 12 13 15 IMPORTANT: Place the included felt slipmat on the platter; then place your record on the felt slipmat to carefully hold your records. IMPORTANT: Remove cartridge cover operating the turntable. the plastic
(needle cover) before 7. Autostop switch This switch turns autostop on or off. When autostop is on, the platter will start spinning when the tonearm is placed over the record and stop spinning when the record has reached the end. (When autostop is off, the platter will always spin regardless of the position of the tonearm.) Note: If your vinyl record stops before it reaches the end of the music, turn Autostop to the off position for this particular record. This is generally recommended for 45 RPM records.
*WARNING: The RCA outputs are LINE level. Please only connect these to LINE level inputs. You may damage your receiver if you plug in a LINE level device into a PHONO level input. 8. Headphone Jack Connect headphones (sold separately) to listen to your vinyl playback. 9. Bluetooth Button Press this button to start Bluetooth pairing. If after 5 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive, and the LED will turn off. If currently connected, press this to disconnect from a currently connected Bluetooth device. 10. Bluetooth LED This LED blinks when pairing with a Bluetooth device. Once fully paired, the LED will remain solid. The LED will be off when Bluetooth is inactive, and when the Air LP is turned off. 11. Volume Adjust this to control the headphone and Bluetooth output level. 12. RCA Output* The audio from a playing vinyl record is sent to this line-level RCA audio output. This must not be connected to phono level devices. 13. USB Audio Output Use the included USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer. Please see the Using Air LP With Your Computer section of this manual for information. 14. Power Cable Input Use the included adapter to connect to wall power. 15. Power Button Press this button to turn Air LP on/off. Air LP Turntable will re-connect to your last used Bluetooth Speaker when powering on, if it is in range. 16. Aux Input Connect a CD player, digital media player, or other audio source to this 1/8 stereo auxiliary input. The audio from the Aux Input is also transmitted over a Bluetooth connection. 3 Air LP Speaker Features 1. Power/Volume Knob The Air LP Speaker can be powered on or off by pressing and releasing the Power/Volume knob. LED The Power/Volume Knob LED ring will be lit solid red when it is powered on and in pairing mode. The LED ring will be lit solid blue when it is connected to a Bluetooth device. 2. Power/Volume Knob 1 2 3 4 3. Power Jack Connect the included 12V DC, 1.6A power supply here to power the Air LP Speaker. 4. Aux Input Connect a CD player, MP3 player, or other audio source to this stereo 3.5 mm (1/8) input. Using Air LP Speaker with Air LP Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly. 1. Power on your Air LP turntable. 2. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth device. 3. To power on Air LP Speaker, press and release the Power/Volume knob. The Power/Volume Knob LED ring will be solid red showing it is powered on and in pairing mode. 4. Once the Air LP turntable is connected to the Air LP Speaker, the Bluetooth LED on the Air LP turntable will be solid. The LED ring on the Air LP Speaker will be solid blue once it is connected. Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive, and the LED will turn off. 5. Play music on your Air LP turntable. 6. Adjust the volume knob on the Air LP Speaker by rotating the knob. 7. To disconnect pairing, press and hold the Volume knob on Air LP Speaker for two seconds, or press the Bluetooth button on Air LP Turntable. The LED ring on the Air LP Speaker will return to red, and the Bluetooth LED on Air LP Turntable will be off. Note: Move other Bluetooth receivers/speakers out of range of Air LP (30/9.1m or more) or turn them off to connect to your Bluetooth speaker. Pairing Air LP to Other Bluetooth Speakers Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly. 1. Power on your Bluetooth speaker and ensure it is in pairing mode. 2. Power on the Air LP turntable. 3. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth speaker. Once Air LP is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth speaker should also indicate that its paired. Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive, and the LED will turn off. Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher. 4. Play music on your Air LP turntable. If you are connected to a Bluetooth speaker with a play/pause button, and do not hear audio, try pressing the play/pause button. 5. Adjust the volume on your Bluetooth speaker (if applicable) or the Volume knob on Air LP to control the 6. To disconnect pairing, power off the Air LP turntable or turn of Bluetooth pairing on your Bluetooth output level. speaker. Note: Move other Bluetooth receivers/speakers out of range of Air LP (30/9.1m or more) or turn them off to connect to your Bluetooth speaker. 4 Using Air LP Speaker with Other Bluetooth Devices 1. Power on your Bluetooth device (smartphone, tablet, etc.). 2. Power on the Air LP Speaker by pressing and releasing the Power/Volume knob. 3. The Power/Volume knob LED ring will be solid red showing it is powered on and in pairing mode. 4. Go to your devices Bluetooth settings, find Air LP Speaker, and connect. 5. Once your device is connected to the Air LP Speaker, the Bluetooth LED ring on the Air LP Speaker will be solid blue. 6. Play music on your Bluetooth device. 7. Adjust the volume knob on the Air LP Speaker by rotating the knob. 8. To disconnect pairing, press and hold the Volume knob on Air LP Speaker for two seconds. The LED ring will return to red. Alternately, you can turn off Bluetooth on your Bluetooth device or select Disconnect from your Bluetooth devices settings menu. 9. To connect to another Bluetooth device, repeat steps to pair. Using Air LP With Your Computer Recording To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable. EZ Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish converting your vinyl, you can then burn to CD or load onto portable media devices. To install the software, insert the included CD into your computer, and follow the on-screen instructions. 1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect Air LP's USB port to an available USB port on your computer. 2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu All Programs (Windows) or the Applications menu (Mac). 3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move Air LP's tonearm over the record to start playback. Note: To listen to a record while its playing, listen through your computer's speakers, or connect Air LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level inputs. 4. When you have finished recording, raise Air LP's tonearm from the record and return it to its arm clip. Visit ionaudio.com/computer-optimization for more information on optimizing your computer for audio. Playback You can listen to the music on your computer through its internal speakers or through headphones connected to it. (Air LP cannot be used as a playback device for your computer's audio.) To listen to a record while it's playing, listen through your computer's speakers, or connect Air LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-
level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level inputs. 5 Troubleshooting If you experience any difficulties, please refer to the troubleshooting steps below as well as those in the EZ Vinyl/Tape Converter manual included with this product. If you are recording to a computer:
o Make sure that Air LP is powered on and that the needle is on the record. o Make sure Air LP is selected as your computer's default recording device (see the instructions below). o If you are listening through your computer's speakers, make sure those speakers are selected as your computer's default playback device (see the instructions below). Alternatively, you could connect Air LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-level inputs;
Air LP's RCA outputs are line-level and could damage a device with phono-level inputs.
(Note: The RCA outputs monitor the signal coming out of the turntable, not the signal coming from your computer.) o Disconnect then reconnect the USB cable connecting Air LP to your computer. I'm not hearing any audio when playing music:
If you are playing music from vinyl:
o Make sure that Air LP is powered on and that the needle is on the record. o Connect Air LP's RCA outputs to a stereo system or powered speakers. (Do not connect them to phono-level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level inputs.) If you are playing music from your computer:
o Make sure your software music player's volume is turned up. o Make sure your computer's volume is turned up. o Make sure your computer's speakers are selected as your computer's default playback device (see the instructions below). (Air LP cannot be used as a playback device for your computer's audio.) I am hearing a hum through my speaker or laptop when using the turntable:
If you are recording to a laptop:
o Please connect the laptop to a grounded power supply (3 prong) If you are playing through a speaker:
o Please connect to a grounded (3 prong) power supply. My record is not playing at the correct speed; its pitch is too high or too low:
o Ensure the 33 / 45 / 78 switch is set to the correct speed for your record. The Bluetooth speaker that I want is not pairing to Air LP. o Turn off or move other nearby Bluetooth speakers over 30 (9.1m) so only the closest Bluetooth speaker you want will pair. I am connected to a Bluetooth speaker but do not hear any audio. o If you are connected to a Bluetooth speaker with a play/pause button, and do not hear audio, try o Press and release Air LPs Bluetooth button to disconnect it from the Bluetooth speaker, and then press pressing the play/pause button. it once more to try pairing it again. o Turn Air LP off and then on again, and then press its Bluetooth button to try pairing it again. o Use the volume knob on Air LP to turn up the Bluetooth output level. My smartphone will not connect to Air LP Turntable. o Air LP Turntable acts as a Bluetooth Transmitter, sending the audio out of Air LP into other Bluetooth Speakers. Air LP Turntable cannot act as a Bluetooth Receiver and play music from your smartphone over headphones or RCA outputs. The Bluetooth LED will not stop blinking. o Once the Bluetooth button is pressed, Air LP will try to connect to nearby Bluetooth speakers for 5 minutes. To stop the blinking Bluetooth LED, power cycle Air LP. I am hearing an echo when listening to music. o Either listen to music through a paired Bluetooth speaker or connect the RCA audio outputs from Air LP to a speaker. Both playback methods should not be used at the same time. I am hearing static noise in my headphones. o Press Air LPs Bluetooth button to disconnect it from a paired Bluetooth speaker. When listening to Air LP with headphones, always make sure Air LP is not connected to a Bluetooth speaker at the same time. 6 Setting Air LP as the Default Recording Device Windows XP: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Sound and Audio Devices. Click the Audio tab and under Sound recording, select USB PnP Audio Device as the default device. Windows Vista: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Hardware and Sound Sound. Click the Recording tab and select USB PnP Audio Device as the default device. Windows 7: Click Start Menu Control Panel Sound. Click the Recording tab and select USB PnP Audio Device as the default device. Windows 8: From the Start Menu, click the lower-left corner of the screen to bring yourself to the Desktop. In the bottom-right corner of the Taskbar, locate the Volume Control "Speaker" icon. Right-click the speaker and select Playback Devices. In the Windows Sound control panel select the Recording tab. If USB PnP Audio Device does not have a green "check mark" symbol next to it, right-click it and select "Set as Default Device". Setting Your Computer's Soundcard as the Default Playback Device Windows XP: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Sound and Audio Devices. Click the Audio tab and under Sound playback, select your computer's soundcard as the default device. Windows Vista: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Hardware and Sound Sound. Click the Playback tab and select your computer's soundcard as the default device. Windows 7: Click Start Menu Control Panel Sound. Click the Playback tab and select your computer's soundcard as the default device. Windows 8: From the Start menu, click the lower-left corner of the screen to bring yourself to the Desktop. In the bottom-right corner of the Taskbar, locate the Volume Control "Speaker" icon. Right-click the speaker and select Playback Devices. The Windows Sound control panel should appear set on the Playback tab. If your computers soundcard does not have a green "check mark" symbol next to it, right-click it and select
"Set as Default Device". Mac: Click the upper-left "apple" icon then click System Preferences Sound. Click the Output tab. From the menu, select Internal Speakers if you are using the computer's internal speakers or select Headphones if you are using speakers or headphones attached to the computer's 1/8" headphone output. BEFORE RETURNING THE PRODUCT, please contact ION Audio or your retailer for technical support. Contact information can be found in the Safety Instruction Booklet included with this product. ionaudio.com/support 7 Technical Specifications Air LP Turntable Dimensions
(Length x Width x Depth) 16" x 14" x 4.5"
406 mm x 356 mm x 114 mm) Air LP Turntable Weight 6.7 lbs. (3 kg) Air LP Turntable Power 12V DC, 0.2A, center pin-positive, tip-negative Air LP Turntable Bluetooth Version BT 3.0 Air LP Speaker Dimensions (Length x Width x Depth) 2.8 x 16.4 x 2.7 72 mm x 417 mm x 68 mm Air LP Speaker Power 9V DC, 2A Air LP Speaker Wattage Air LP Speaker Drivers Air LP Turntable Bluetooth Function Air LP Speaker Bluetooth Function Air LP Speaker Bluetooth Version Bluetooth Range Cartridge Type Cartridge and Stylus 20 W (Peak)
(2) 2 full-range drivers Bluetooth Transmitter Bluetooth Receiver BT 3.0 Up to 30 / 9.1 m*
Ceramic Cartridge and Stylus: CZ-800-10 (sapphire-tipped) is included, and also available at ionaudio.com/products/details/CZ-800-
10. For a 78 RPM stylus, the iCT06rs is available at ionaudio.com/ict06rs. Specifications are subject to change without notice.
*Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in line of sight, so it is unaffected by walls, furniture, etc. Battery life may vary based on temperature, age, and volume usage of product. Trademarks and Licenses ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple, Inc., registered in the U.S.A. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. RCA is a trademark of Technicolor SA. All other product or company names are trademarks or registered trademarks of their respective owners. 8 Gua de inicio rpido (Espaol) Introduccin Contenido de la caja Asegrese de que todos los elementos abajo indicados estn incluidos en la caja. Air LP Altavoz Air LP Adaptador de corriente del Air LP Adaptador de corriente del altavoz Air LP Adaptador de alimentacin Cubierta antipolvo Cable USB Cable RCA Cable auxiliar de 1/8 (3.5 mm) pulg Adaptador para 45 RPM Almohadillas antideslizantes de fieltro CD de software Gua de inicio rpido Manual sobre la seguridad y garanta Soporte Para obtener la informacin ms completa acerca de este product (los requisitos del sistema, compatibilidad, etc) y registro del producto, visite ionaudio.com. Diagrama de conexin Los elementos que no se enumeran en Contenido de la caja se venden por separado. Dispositivo de msica
(opcional) Suministro Elctrico Altavoz Air LP 9 Caractersticas del Air LP 1. 2. 3. 4. 5. 6. 7. 8. 9. Plato Coloque aqu su disco. Soporte del adaptador para 45 RPM Sostiene el adaptador para 45 RPM incluido. Cuando no use el adaptador, pngalo en este soporte. Brazo El brazo se puede subir y bajar a mano o presionando la palanca de subir / bajar. Clip del brazo Este clip diseado especialmente fija el brazo mientras est en reposo o no se usa. El clip ha sido diseado para que permanezca hacia arriba mientras est desbloqueado. Palanca de subir / bajar Sube y baja el brazo. Conmutador de 33 / 45 / 78 RPM Este conmutador controla las RPM del plato del giradiscos. Nota: Para obtener los mejores resultados al reproducir discos de vinilo de 78 RPM, use una pa para 78 (que se vende por separado). Use slo una pa para 78 con los discos de vinilo de 78 RPM. Adquiera la pa para 78 iCT06rs en ionaudio.com/ict06rs. Interruptor de parada automtica Este interruptor activa y desactiva la parada automtica. Cuando la parada automtica est activada, el plato comienza a girar cuando el brazo se coloca sobre el disco y se detiene cuando llega al final del mismo. (Si est desactivada, el plato gira siempre, independientemente de la posicin del brazo.) Nota: Si su disco de vinilo se detiene antes de que llegue al final de la msica, gire Autostop a la posicin de apagado para este registro particular. Esto generalmente se recomienda para discos de 45 RPM. Conector para auriculares Conecte auriculares (que se venden por separado) para escuchar sus discos de vinilo. Botn Bluetooth Pulse este botn para comenzar el apareamiento Bluetooth. Si tras 5 minutos no puede encontrarse ningn altavoz Bluetooth con el cual aparearse, el transmisor Bluetooth se desactivar y el LED se apagar. Si est actualmente conectado, pulse este botn para desconectarlo del dispositivo actualmente conectado. Bluetooth 2 3 1 4 5 6 7 9 11 10 8 IMPORTANTE: Coloque la almohadilla antideslizante de fieltro incluida sobre el plato y coloque su disco encima de ella para que sus discos queden sostenidos cuidadosamente. IMPORTANTE: Retire la cubierta plstica de la cpsula (cubierta de la pa) antes de hacer funcionar el giradiscos.
*ADVERTENCIA: Las salidas RCA son para nivel de LNEA. Conctelas slo a las entradas de nivel de lnea (LINE). Puede daar el si enchufa un dispositivo de nivel de lnea en una entrada de nivel fonogrfico (PHONO). receptor 14 16 12 13 15 10. LED Bluetooth Este LED parpadea al aparearse con un dispositivo Bluetooth. Una vez totalmente apareado, el LED permanecer encendido. Este LED permanecer apagado cuando el Bluetooth est inactivo y cuando el Air LP est apagado. 11. Volumen Ajuste esto para controlar el nivel de salida del auricular y Bluetooth. 12. Salida RCA* El audio del disco de vinilo que se est reproduciendo se aplica a esta salida de audio RCA de nivel de lnea. Esta salida no debe conectarse a dispositivos de nivel fonogrfico. Nota: Si su disco de vinilo se detiene antes de llegar al final de la msica, gire Autostop a la posicin de desactivado para este disco en particular. Esto se recomienda en general para los discos de 45 RPM. 13. Salida de audio USB Use el cable USB incluido para conectar el giradiscos a su computadora. La conexin USB enva audio desde el giradiscos a su computadora. Para obtener informacin, consulte la seccin Cmo usar el Air LP con su computadora. 14. Entrada del cavo de alimentacin Use el adaptador incluido para conectarlo al tomacorriente de pared. 15. Botn de encendido Pulse este botn para encender y apagar el Air LP. El giradiscos Air LP se reconectar con el ltimo altavoz Bluetooth utilizado al encenderse, si se encuentra dentro del alcance. 16. Entrada auxiliary Conecte a esta entrada auxiliar estreo de 1/8 pulg. un reproductor de CD, un reproductor de medios digitales u otra fuente de audio. El audio proveniente de la entrada Aux tambin se transmite por la conexin Bluetooth. 10 Caractersticas del altavoz Air LP 1. Perilla Power/Volume
(encendido/volumen) El altavoz Air LP puede encenderse o apagarse presionando y liberando la perilla Power/Volume. 2. LED de la perilla Power/Volume El anillo de LED de la perilla Power/Volume se iluminar de color rojo permanentemente cuando est encendido y en modo de apareamiento. El anillo de LED se iluminar de color azul permanentemente cuando est conectado con un dispositivo Bluetooth. 1 2 3 4 3. Conector hembra de alimentacin Conecte aqu la fuente de corriente de 12 V CC, 1,6 A para alimentar el altavoz Air LP. 4. Entrada auxiliar Conecte a esta entrada estreo de 3,5 mm (1/8 pulg.) un reproductor de CD, un reproductor de MP3 u otra fuente de audio. Uso del altavoz Air LP con el Air LP El Air LP cuenta con un transmisor Bluetooth que transmite audio a un altavoz Bluetooth de forma inalmbrica. 1. Encienda su giradiscos Air LP. 2. Pulse y suelte el botn de Bluetooth el Air LP para comenzar el apareamiento con su dispositivo Bluetooth. 3. Para encender el altavoz Air LP, encenderse o apagarse la perilla Power/Volume. El anillo de LED de la perilla Power/Volume se iluminar de color rojo permanentemente para mostrar que est encendido y en modo de apareamiento. 4. Una vez conectado el giradiscos Air LP con el altavoz Air LP, el LED Bluetooth del giradiscos Air LP quedar encendido permanentemente. El anillo de LED del altavoz Air LP se iluminar de color azul permanentemente una vez conectado. Nota: Air LP se conectar con el altavoz Bluetooth ms cercano. Si tras 5 minutos no puede encontrarse ningn altavoz Bluetooth con el cual aparearse, el transmisor Bluetooth se desactivar y el LED se apagar. 5. Reproduzca msica en su giradiscos Air LP. 6. Ajuste la perilla de volumen del altavoz Air LP girndola. 7. Para desconectar el apareamiento, pulse y mantenga el perilla de volumen el Air LP Speaker durante 2 segundos o pulse el botn Bluetooth del giradiscos Air LP. El anillo de LED del altavoz Air LP se iluminar de rojo y el LED Bluetooth del giradiscos del Air LP se apagar. Nota: Aleje otros receptores/altavoces Bluetooth fuera del alcance del Air LP (10 metros o ms) para desconectarlos a fin de conectar su altavoz Bluetooth. Apareamiento del Air LP con otros altavoces Bluetooth El Air LP cuenta con un transmisor Bluetooth que transmite audio a un altavoz Bluetooth de forma inalmbrica. 1. Encienda su altavoz Bluetooth y asegrese de que se encuentre en modo de apareamiento. 2. Encienda el giradiscos Air LP. 3. Pulse y suelte el botn de Bluetooth el Air LP para comenzar el apareamiento con su altavoz Bluetooth. Una vez conectado con el altavoz Bluetooth, el LED Bluetooth del Air LP permanecer iluminado. Su altavoz Bluetooth tambin debera indicar que est apareado. Nota: Air LP se conectar con el altavoz Bluetooth ms cercano. Si tras 5 minutos no puede encontrarse ningn altavoz Bluetooth con el cual aparearse, el transmisor Bluetooth se desactivar y el LED se apagar. Nota: El alcance mximo se logra cuando se utilizan dispositivos con Bluetooth 4.0 o superior. 4. Reproduzca msica en su giradiscos Air LP. Si est conectado con un altavoz Bluetooth con un botn reproducir/pausa y no escucha el audio, intente pulsar dicho botn. 5. Ajuste el volumen de su altavoz Bluetooth (si aplica) con la perilla de volumen del Air LP para controlar el nivel de 6. Para desconectar el apareamiento, apague el giradiscos Air LP o apague el apareamiento Bluetooth en su altavoz salida. Bluetooth. Nota: Aleje otros receptores/altavoces Bluetooth fuera del alcance del Air LP (10 metros o ms) para desconectarlos a fin de conectar su altavoz Bluetooth. 11 Uso del altavoz Air LP con otros dispositivos Bluetooth 1. Encienda su dispositivo Bluetooth (telfono inteligente [smartphone], tableta, etc.). 2. Mantenga pulsado el perilla de encenderse o apagarse presionando y liberando la perilla Power/Volume. 3. El anillo de LED de la perilla Power/Volume se iluminar de color rojo permanentemente para mostrar que est encendido y en modo de apareamiento. 4. Navegue a la pantalla de ajustes Bluetooth de su dispositivo, busque altavoz Air LP y conecte. 5. Una vez conectado su dispositivo con el altavoz Air LP, el anillo de LED Bluetooth del altavoz Air LP se iluminar de color azul permanentemente. 6. Reproduzca msica en su dispositivo Bluetooth. 7. Ajuste la perilla de volumen del altavoz Air LP girndola. 8. Para desconectar el apareamiento, pulse y mantenga el perilla de volumen el Air LP Speaker durante 2 segundos. El anillo de LED volver a iluminarse de color rojo. Como alternativa, puede apagar el Bluetooth en su dispositivo Bluetooth o seleccionar "Desconectar" en el men de ajustes Bluetooth de su dispositivo. 9. Para conectar otro dispositivo Bluetooth, repita los pasos del apareamiento. Cmo usar el Air LP con su computadora Cmo grabar Para grabar msica en su ordenador, puede usar el EZ Vinyl/Tape Converter de ION y un cable USB. EZ Vinyl/Tape Converter guarda conveniente sus grabaciones en su computadora. Despus de terminar de convertir su vinilo, puede quemarlo en CD o cargarlo en dispositivos de medios porttiles. Para instalar el software, inserte el CD incluido en su computadora y siga las instrucciones de la pantalla. 1. Con EZ Vinyl/Tape Converter instalado en su computadora, use el cable USB incluido para conectar el puerto USB del Air LP a un puerto USB disponible de su computadora. 2. En su computadora, puede abrir EZ Vinyl/Tape Converter yendo al men Start All Programs (Inicio Todos los programas) (Windows) o al men Applications (Aplicaciones) (Mac). 3. Siga las instrucciones de la pantalla para preparar su grabacin. Cuando se le indique que reproduzca su msica, lleve el brazo del Air LP sobre el disco para iniciar la reproduccin. Nota: Para escuchar el disco mientras se reproduce, igalo por los altavoces de su computadora o conecte las salidas RCA del Air LP a un sistema estreo o altavoces alimentados. No las conecte a entradas de nivel fonogrfico las salidas RCA del Air LP son de nivel de lnea y podran daar un dispositivo con entradas de nivel fonogrfico. 4. Cuando termine de grabar, levante el brazo del Air LP del disco y colquelo en su clip. Visite ionaudio.com/computer-optimization para ms informacin sobre la optimizacin de su computadora para audio. Reproduccin Puede escuchar la msica en su computadora a travs de su altavoz interno o de auriculares conectados a la misma. (El Air LP no se puede usar como dispositivo de reproduccin para el audio de su computadora.) Para escuchar el disco mientras se reproduce, igalo por los altavoces de su computadora o conecte las salidas RCA del Air LP a un sistema estreo o altavoces alimentados. No las conecte a entradas de nivel fonogrfico las salidas RCA del Air LP son de nivel de lnea y podran daar un dispositivo con entradas de nivel fonogrfico. 12 Solucin de problemas Si experimenta alguna dificultad, consulte los pasos de solucin de problemas que se indican a continuacin, como tambin el manual de EZ Vinyl/Tape Converter incluido con este producto. Si est grabando en una computadora:
o Asegrese de que el Air LP est encendido y que la pa est sobre el disco. o Haga que el Air LP est seleccionado como dispositivo de grabacin predeterminado de su computadora (consulte las instrucciones de ms abajo). o Si est escuchando por los altavoces de la computadora, asegrese de que estos estn seleccionados como dispositivo de reproduccin predeterminado de la misma (consulte las instrucciones de ms abajo). Como alternativa, puede conectar las salidas RCA del Air LP a un sistema estreo o altavoces alimentados. No las conecte a entradas de nivel fonogrfico las salidas RCA del Air LP son de nivel de lnea y podran daar un dispositivo con entradas de nivel fonogrfico.
(Nota: Las salidas RCA monitorean la seal proveniente del giradiscos y no la seal proveniente de su computadora.) o Desconecte y vuelva a conectar el cable USB entre el Air LP y la computadora. No oigo ningn audio cuando reproduzco la msica:
Si est reproduciendo la msica de un vinilo:
o Asegrese de que el Air LP est encendido y que la pa est sobre el disco. o Conecte las salidas RCA del Air LP a un sistema estreo o altavoces alimentados. (No las conecte a entradas de nivel fonogrfico las salidas RCA del Air LP son de nivel de lnea y podran daar un dispositivo con entradas de nivel fonogrfico.) Si est reproduciendo la msica de la computadora:
o Asegrese de que el volumen del reproductor de msica del software est ajustado a un valor alto. o Asegrese de que el volumen de su computadora est ajustado a un valor alto. o Asegrese de que los altavoces de su computadora estn seleccionados como dispositivo de reproduccin predeterminado de la misma (consulte las instrucciones de ms abajo). (El Air LP no se puede usar como dispositivo de reproduccin para el audio de su computadora.) Oigo un zumbido en mi altavoz o porttil cuando se usa el giradiscos:
Si est grabando en una laptop:
o Conecte la laptop a un suministro elctrico con conexin a tierra (de 3 patas) Si est reproduciendo por un altavoz:
o Conecte el equipo a un suministro elctrico con conexin a tierra (de 3 patas). Mi disco no se reproduce a la velocidad correcta. Su tono es demasiado alto o bajo:
o Asegrese de que el interruptor 33 / 45 / 78 est colocado en la velocidad correcta para su disco. Mi altavoz Bluetooth no se aparea con el Air LP. o Apague o aleje a ms de 10 metros otros altavoces Bluetooth cercanos de forma que el ms cercano sea el que desee aparear. o Pulse y suelte el botn de Bluetooth del Air LP para desconectarlo del altavoz Bluetooth, y luego plselo una vez ms para intentar aparearlo nuevamente. o Apague y vuelva a encender el Air LP, y luego pulse su botn Bluetooth para intentar aparearlo nuevamente. o Utilice la perilla de volumen del Air LP para aumentar el nivel de salida de Bluetooth. Estoy conectado con un altavoz Bluetooth pero no escucho ningn audio. o Si est conectado con un altavoz Bluetooth con un botn reproducir/pausa y no escucha el audio, intente pulsar dicho botn. Mi telfono inteligente (smartphone) no se conecta con el giradiscos Air LP. o El giradiscos Air LP funciona como un transmisor Bluetooth, transmitiendo el audio desde el Air LP hacia otros altavoces Bluetooth. El Air LP no funciona como un receptor Bluetooth que reproduce msica desde su telfono inteligente como si fuera unos auriculares o salidas RCA. El LED Bluetooth no para de parpadear. Escucho esttica en mis auriculares. o Una vez pulsado el botn Bluetooth, el Air LP intentar conectarse con los altavoces Bluetooth cercanos durante 5 minutos. Para detener el parpadeo del LED Bluetooth, reinicie el Air LP. o Pulse el botn Bluetooth del Air LP para desconectarlo del altavoz Bluetooth apareado. Al escuchar el Air LP con auriculares, siempre asegrese de que el Air LP no est conectado a un altavoz Bluetooth al mismo tiempo. 13 Cmo configurar el Air LP como dispositivo de grabacin predeterminado Windows XP: Haga clic en el men Start Control Panel (Inicio Panel de control (o Settings Control Panel (Configuracin Panel de control) en la vista clsica) Sound and Audio Devices (Dispositivos de sonido y audio). Haga clic en la pestaa Audio y bajo Sound recording (Grabacin de sonido), seleccione el Dispositivo de audio USB PnP como dispositivo predeterminado. Windows Vista: Haga clic en el men Start Control Panel (Inicio Panel de control) (o Settings Control Panel (Configuracin Panel de control) en la vista clsica) Hardware and Sound (Hardware y sonido) Sound (Sonido). Haga clic en la pestaa Recording (Grabacin) y seleccione el Dispositivo de audio USB PnP como dispositivo predeterminado. Windows 7: Haga clic en el men Start Control Panel Sound (Inicio Panel de control Sonido). Haga clic en la pestaa Recording (Grabacin) y seleccione el Dispositivo de audio USB PnP como dispositivo predeterminado. Windows 8: Desde el men Start (Inicio), haga clic en la esquina inferior izquierda de la pantalla para entrar al escritorio. En la esquina inferior derecha de la barra de tareas, localice el icono del "Altavoz" de control de volumen. Haga clic derecho en el altavoz y seleccione Playback Devices (Dispositivos de reproduccin). En el panel de control Windows Sound (Sonido de Windows), seleccione la pestaa Recording (Grabacin). Si Dispositivo de audio USB PnP no tiene el smbolo de la "marca de verificacin" verde junto a l, haga clic derecho en el mismo y seleccione Set as Default Device (Configurar como dispositivo predeterminado). Mac: Haga clic en el icono superior izquierdo de la "manzana" y luego en System Preferences Sound
(Preferencias del sistema Sonido). Haga clic en la pestaa Input (Entrada). En el men, seleccione el Dispositivo de audio USB PnP como dispositivo. Cmo configurar la tarjeta de sonido de su computadora como dispositivo de reproduccin predeterminado Windows XP: Haga clic en el men Start Control Panel (Inicio Panel de control (o Settings Control Panel (Configuracin Panel de control) en la vista clsica) Sound and Audio Devices (Dispositivos de sonido y audio). Haga clic en la pestaa Audio y bajo Sound playback (Reproduccin de sonido), seleccione la tarjeta de sonido de su computadora como dispositivo predeterminado. Windows Vista: Haga clic en el men Start Control Panel (Inicio Panel de control) (o Settings Control Panel (Configuracin Panel de control) en la vista clsica) Hardware and Sound (Hardware y sonido) Sound (Sonido). Haga clic en la pestaa Playback (Reproduccin) y seleccione la tarjeta de sonido de su computadora como dispositivo predeterminado. Windows 7: Haga clic en el men Start Control Panel Sound (Inicio Panel de control Sonido). Haga clic en la pestaa Playback (Reproduccin) y seleccione la tarjeta de sonido de su computadora como dispositivo predeterminado. Windows 8: Desde el men Start (Inicio), haga clic en la esquina inferior izquierda de la pantalla para entrar al escritorio. En la esquina inferior derecha de la barra de tareas, localice el icono del "Altavoz" de control de volumen. Haga clic derecho en el altavoz y seleccione Playback Devices (Dispositivos de reproduccin). El panel de control Windows Sound (Sonido de Windows) debe aparecer ubicado en la pestaa Playback
(Reproduccin). Si la tarjeta de sonido de su computadora no tiene el smbolo de la "marca de verificacin"
verde junto a ella, haga clic derecho en la misma y seleccione Set as Default Device (Configurar como dispositivo predeterminado). Mac: Haga clic en el icono superior izquierdo de la "manzana" y luego en System Preferences Sound
(Preferencias del sistema Sonido). Haga clic en la pestaa Output (Salida). En el men, seleccione Internal Speakers (Altavoces internos) si va a usar los altavoces internos de la computadora o Headphones
(Auriculares) si va a usar altavoces o auriculares conectados a la salida para auriculares de 1/8" de la computadora. ANTES DE DEVOLVER EL PRODUCTO, comunquese con Ion Audio o con su vendedor minorista para solicitar soporte tcnico. La informacin de contacto se encuentra en el folleto de instrucciones de seguridad incluido con este producto. ionaudio.com/support 14 Especificaciones tcnicas Dimensiones del giradiscos Air LP
(Largo x Ancho x Alto) 16 x 14 x 4,5 pulg. 406 mm x 356 mm x 114 mm Peso del giradiscos Air LP 6,7 lb 3 kg Alimentacin del giradiscos Air LP Versin de Bluetooth del giradiscos Air LP 12 V CC, 0,2 A, patilla central positiva, punta negativa BT 3.0 Dimensiones del altavoz Air LP 2,8 x 16,4 x 2,7 pulg. 72 mm x 417 mm x 68 mm) Alimentacin del altavoz Air LP Potencia del altavoz Air LP Drivers del altavoz Air LP Funcin de Bluetooth del giradiscos Air LP Funcin de Bluetooth del altavoz Air LP Versin de Bluetooth del altavoz Air LP Alcance de Bluetooth Tipo de cpsula Cpsula y pa 9V CC, 2A 20 W (pico)
(2) drivers de rango completo de 2 pulg. Transmisor Bluetooth Receptor Bluetooth BT 3.0 Hasta 30 pies / 9.1 m *
Cermica Cpsula y pa: Se incluye una CZ-800-10 (con punta de zafiro), la cual tambin est disponible en ionaudio.com/products/details/CZ-800-10. Para una pa de 78 RPM, la iCT06rs est disponible en ionaudio.com/ict06rs. Especificaciones sujetas a cambio sin previo aviso.
* El alcance de Bluetooth se ve afectado por paredes, obstrucciones y movimiento. Para lograr un rendimiento ptimo, coloque el producto en la sala en donde pueda verlo de manera que no est obstaculizado por paredes, muebles, etc. La vida til de la batera puede variar en funcin de la temperatura, la antigedad y el volumen al que se usa el producto. 15 Guide dutilisation rapide (Franais) Introduction Contenu de la bote Assurez-vous que tous les articles numrs dans le contenu de la bote de ce guide sont inclus dans la bote:
Air LP Enceinte Air LP Cble d'alimentation pour platine vinyle Air LP Cble d'alimentation pour enceinte Air LP Adaptateur dalimentation Couvercle de protection Cble USB Cble RCA Cble auxiliaire de 1/8 (3.5 mm) po Adaptateur 45 t/min Tapis en feutre CD logiciel Guide dutilisation rapide Consignes de scurit et informations concernant la garantie Alimentation Lecteur de musique
(facultatif) Assistance Pour les dernires informations concernant ce produit (la configuration systme minimale requise, la compatibilit, etc) et l'enregistrement du produit, veuillez visitez le site ionaudio.com. Schma de connexion Les lments qui ne figurent pas dans le Contenu de la bote sont vendus sparment. Enceinte Air LP 16 3. 4. 5. 6. 7. 8. 9. Caractristiques du Air LP 1. 2. 11 10 9 8 4 3 2 1 5 6 7 Plateau Veuillez placer le disque sur ce plateau. Rangement pour Adaptateur 45 Tr/min Il permet de ranger l'adaptateur 45 tr/min lorsquil nest pas utilis. Lorsquil nest pas utilis, veuillez mettre l'adaptateur dans cet emplacement. Bras de lecture Le bras de lecture peut tre lever ou abaisser manuellement ou en utilisant le bouton du levier de commande. Serre-bras Ce serre bras est conu spcialement afin de maintenir en place le bras de lecture lorsque la platine nest pas utilise. Le serre-bras a t conu pour rester en position leve lorsquil est dverrouill. Levier de commande Permet de lever ou dabaisser le bras de lecture. Slecteur de vitesse (33/45/78) Ce slecteur rgit la vitesse de rotation du plateau. Remarque : Pour de meilleurs rsultats lors de la lecture de disques vinyles de 78 tours, utilisez une pointe de lecture 78 (vendu sparment). Utilisez uniquement une pointe de lecture 78 pour les disques vinyles de 78 tours. Vous pouvez acheter une pointe de lecture iCT06rs 78 sur le site ionaudio.com/ict06rs. Autostop Ce commutateur permet d'activer et de dsactiver la fonction autostop. Lorsquelle est active, le plateau commence tourner ds que le bras de lecture est plac au-dessus du disque et sarrte lorsque laiguille a atteint la fin du disque. (Lorsqu'elle est dsactive, le plateau tourne, peu importe lemplacement du bras de lecture.) Remarque: Si votre disque vinyle se arrte avant qu'il ne atteigne la fin de la musique, tournez Autostop en position d'arrt pour ce dossier en particulier. Ce est gnralement recommand pour 45 tours. Sortie casque Branchez un casque d'coute sparment) pour couter laudio provenant du disque vinyle. Touche Bluetooth Appuyez sur cette touche pour lancer le jumelage Bluetooth. Si aprs 5 minutes, aucune enceinte Bluetooth nest dtecte, l'metteur Bluetooth devient inactif et la DEL s'teint. Lorsquune enceinte est dj connecte, cette touche permet de supprimer la connexion Bluetooth.
*MISE EN GARDE : Les sorties RCA sont niveau ligne. Veuillez ne les brancher des entres niveau ligne. Vous pourriez endommager votre rcepteur si un appareil NIVEAU LIGNE est branch une entre PHONO. IMPORTANT : Placez le tapis de feutrine fourni sur le plateau ; placez ensuite votre disque sur le tapis pour maintenir en place vos disques. IMPORTANT : Retirez le couvercle de plastique de
(protge aiguille) avant dutiliser la platine. 12 13 la cartouche
(vendus 14 15 16 10. DEL Bluetooth Cette DEL clignote lors du jumelage dun appareil Bluetooth. Une fois lappareil connect, la DEL reste allume. La DEL est teinte lorsque la connexion Bluetooth est inactive, et lorsque la platine vinyle Air LP est hors tension. 11. Volume Ce bouton permet de rgler le niveau de la sortie casque et de la sortie de Bluetooth. 12. Sortie RCA* L'audio provenant du disque vinyle est envoy cette sortie audio RCA niveau ligne. Elle ne doit pas tre branche aux appareils phono. Remarque : Si le disque s'arrte avant la fin de la musique, dsactivez la fonction Autostop pour cet enregistrement. Ceci est gnralement recommand pour les disques de 45 tours. 13. Sortie audio USB Utilisez le cble USB inclus pour brancher la platine tourne-disque un ordinateur. La connexion USB permet dacheminer laudio de la platine tourne disque votre ordinateur. Veuillez consulter la section Utilisation du air lp avec un ordinateur de ce manuel pour de plus amples informations. 14. Entre du cble d'alimentation Utilisez le cble dalimentation inclus pour brancher le Air LP dans une 15. prise dalimentation. Interrupteur dalimentation Cette touche permet de mettre le Air LP sous et hors tension. Au dmarrage, la platine vinyle Air LP se reconnecte automatiquement la dernire enceinte Bluetooth connecte, lorsque celle-
ci est porte. 16. Entre auxiliaire Cette entre stro 3,5 mm permet de brancher un lecteur de disques compacts, un lecteur multimdia ou autres sources audio. Le signal audio provenant de l'entre auxiliaire est galement transmis via une connexion Bluetooth. 17 Caractristiques de lenceinte Air LP 1. Interrupteur de mise en Volume/Marche d'appuyer et puis libration Interrupteur de mise en Volume/Marche dalimentation enfonc afin de mettre le Air LP Speaker sous tension. 2. DEL du bouton dalimentation/volume L'anneau DEL autour du bouton dalimentation/volume s'allume rouge lorsque lenceinte est sous tension et durant le jumelage. Lanneau DEL devient bleu lenceinte est connecte un appareil Bluetooth. lorsque 1 2 3 4 3. Entre dalimentation Branchez ladaptateur secteur 12 V CC, 1,6 A inclus cette entre afin dalimenter lenceinte Air LP. 4. Entre auxiliaire Cette entre stro 3,5 mm permet de brancher un lecteur de disques compacts, lecteur MP3 ou autres sources audio. Utilisation de lenceinte Air LP avec la platine vinyle Air LP La platine vinyle Air LP dispose dun metteur Bluetooth afin de transmettre le signal audio sans fil vers une enceinte Bluetooth. 1. Mettez la platine vinyle Air LP sous tension. 2. Enfoncez puis relchez la touche Bluetooth de la platine vinyle Air LP afin de jumeler votre appareil. 3. Pour mettre lenceinte Air LP sous tension, puis libration le bouton dalimentation/volume. L'anneau DEL autour du bouton dalimentation/volume devient rouge afin dindiquer que lenceinte est sous tension et est en cours de jumelage. 4. Lorsque la platine vinyle Air LP est connecte lenceinte Air LP, la DEL Bluetooth sur la platine reste allume. Lanneau DEL sur lenceinte Air LP devient bleu lorsque la connexion la platine est tablie. Remarque : La platine vinyle Air LP se connecte lenceinte Bluetooth la plus proche. Si aprs 5 minutes, aucune enceinte Bluetooth nest dtecte, l'metteur Bluetooth devient inactif et la DEL s'teint. 5. Lancez la lecture de la musique sur la platine vinyle Air LP. 6. Rglez le bouton du volume de lenceinte Air LP en tournant le bouton. 7. Pour supprimer la connexion, maintenez la Volume interrupteur le Air LP Speaker de lenceinte enfonc pendant 2 secondes, ou sur la touche Bluetooth de la platine. L'anneau DEL de lenceinte Air LP redevient rouge et la DEL Bluetooth sur la platine Air LP s'teint. Remarque : Dplacez les autres rcepteurs/enceintes Bluetooth hors de la porte de la platine Air LP (9,1 m ou plus) ou les mettre hors tension afin de connecter votre enceinte Bluetooth. Utilisation de la platine vinyle Air LP avec d'autres enceintes Bluetooth La platine vinyle Air LP dispose dun metteur Bluetooth afin de transmettre le signal audio sans fil vers une enceinte Bluetooth. 1. Mettez lenceinte Bluetooth sous tension et assurez-vous quelle est en mode jumelage. 2. Mettez la platine vinyle Air LP sous tension. 3. Enfoncez puis relchez la touche Bluetooth de la platine vinyle Air LP afin de jumeler votre enceinte Bluetooth. Lorsque la platine vinyle Air LP est connecte lenceinte Bluetooth, la DEL Bluetooth devient bleue. Votre enceinte Bluetooth devrait galement indiquer quelle est connecte. Remarque : La platine vinyle Air LP se connecte lenceinte Bluetooth la plus proche. Si aprs 5 minutes, aucune enceinte Bluetooth nest dtecte, l'metteur Bluetooth devient inactif et la DEL s'teint. Remarque : La plage maximale peut tre atteinte avec lutilisation dappareils dots de Bluetooth 4.0 ou de versions ultrieures. 4. Lancez la lecture de la musique sur la platine vinyle Air LP. Si la platine est connecte une enceinte Bluetooth dote dune touche lecture/pause, et que vous nentendez pas de signal audio, essayez d'appuyer sur la touche lecture/pause. 5. Rglez le volume sur lenceinte Bluetooth (sil y lieu), ou le bouton Volume de la platine Air LP afin dajuster le 6. Pour supprimer la connexion, mettez la platine Air LP hors tension ou dsactivez le mode jumelage Bluetooth sur niveau de sortie. lenceinte Bluetooth. Remarque : Dplacez les autres rcepteurs/enceintes Bluetooth hors de la porte de la platine Air LP (9,1 m ou plus) ou les mettre hors tension afin de connecter votre enceinte Bluetooth. 18 Utilisation de lenceinte Air LP avec d'autres appareils Bluetooth 1. Mettez votre appareil Bluetooth (smartphone, tablette, etc.) sous tension. 2. D'appuyer et puis libration linterrupteur de mise en Volume/Marche. 3. L'anneau DEL autour du bouton dalimentation/volume devient rouge afin dindiquer que lenceinte est sous tension et est en cours de jumelage. 4. Accdez au menu Bluetooth de lappareil, recherchez Air LP Speaker et lancez le jumelage. 5. Lorsque la platine vinyle Air LP est connecte, la DEL Bluetooth de lenceinte Air LP devient bleue. 6. Lancez la lecture audio sur votre appareil Bluetooth. 7. Rglez le bouton de volume de lenceinte Air LP en tournant le bouton. 8. Pour supprimer la connexion, maintenez la Volume interrupteur le Air LP Speaker de lenceinte enfonc pendant 2 secondes. L'anneau DEL reviendra rouge. Vous pouvez galement dsactiver la fonction Bluetooth de votre appareil ou encore slectionner Dconnexion de son menu Bluetooth. 9. Pour jumeler un autre appareil Bluetooth, rptez les tapes du jumelage. Utilisation du Air LP avec un ordinateur Enregistrement Pour enregistrer de la musique sur votre ordinateur, vous pouvez utiliser l'application EZ Vinyl/Tape Converter dION et un cble USB. Le EZ Vinyl/Tape Converter permet de sauvegarder vos enregistrements dans sur votre ordinateur. Une fois la conversion du vinyle termine, vous pouvez graver les fichiers sur CD ou les transfrer sur des lecteurs multimdia. Insrez le CD dinstallation de lapplication dans votre ordinateur, puis suivez les instructions lcran pour continuer linstallation. 1. Une fois lapplication EZ Vinyl/Tape Converter installe sur votre ordinateur, connectez le port USB du Air LP au port USB de votre ordinateur laide du cble USB inclus. 2. Sur votre ordinateur, vous pouvez lancer lapplication EZ Vinyl/Tape Converter en allant dans le menu Dmarrer Tous les programmes (Windows) ou dans le menu Applications (Mac). 3. Suivez ensuite les instructions lcran afin de configurer lenregistrement. Lorsque vous tes invit faire jouer votre musique, dplacez le bras de lecture du Air LP sur le disque afin de dmarrer la lecture. Remarque : Pour couter un disque durant la lecture, vous pouvez utiliser les haut-parleurs de votre ordinateur, ou encore brancher les sorties RCA du Air LP une chane stro ou des haut-parleurs. Ne tentez pas de les brancher des entres phono; les sorties RCA du Air LP sont niveau ligne et pourraient endommager un appareil phono. 4. Une fois lenregistrement termin, soulevez le bras de lecture et remettez-le sur le serre-bras. Visitez le site ionaudio.com/computer-optimization afin obtenir plus dinformation sur comment optimiser votre ordinateur pour une meilleure qualit audio. Lecture Vous pouvez couter de la musique sur votre ordinateur par l'intermdiaire de ses haut-parleurs internes ou en branchant un casque dcoute. (Le Air LP ne peut tre utilis comme priphrique de lecture pour votre ordinateur.) Pour couter un disque durant la lecture, vous pouvez utiliser les haut-parleurs de votre ordinateur, ou encore brancher les sorties RCA du Air LP une chane stro ou des haut-parleurs. Ne tentez pas de les brancher des entres phono; les sorties RCA du Air LP sont niveau ligne et pourraient endommager un appareil phono. 19 Guide de dpannage Si vous prouvez des difficults, veuillez consulter les consignes de dpannage ci-dessous ainsi que celles dans le guide du EZ Vinyl/Tape Converter inclus avec ce produit. Si vous enregistrez sur un ordinateur :
o Assurez-vous que le Air LP est allum et que laiguille est bien sur le disque. o Assurez-vous que le Air LP est slectionn comme priphrique d'enregistrement par dfaut de votre ordinateur
(voir les instructions ci-dessous). o Si vous coutez la musique via les haut-parleurs de votre ordinateur, assurez-vous que ces haut-parleurs sont slectionns comme dispositif de lecture par dfaut de votre ordinateur (voir les instructions ci-dessous). Vous pourriez galement brancher les sorties RCA du Air LP une chane stro ou des haut-parleurs. Ne tentez pas de les brancher des entres phono; les sorties RCA du Air LP sont niveau ligne et pourraient endommager un appareil phono. (Remarque : Les sorties RCA contrlent le signal sortant de la platine tourne-
disque, mais pas le signal provenant de votre ordinateur). o Essayez de dbrancher le cble USB branch au Air LP et votre ordinateur, puis de le rebrancher. Je nentends pas de signal audio lors de la lecture :
Si vous faites la lecture partir dun vinyle :
o Assurez-vous que le Air LP est allum et que laiguille est bien sur le disque. o Branchez les sorties RCA du Air LP une chane stro ou des haut-parleurs. (Ne tentez pas de les brancher des entres phono; les sorties RCA du Air LP sont niveau ligne et pourraient endommager un appareil phono. Si vous faite la lecture partir de votre ordinateur :
o Assurez-vous que le niveau du volume de lapplication soit assez lev. o Assurez-vous que le niveau du volume de l'ordinateur soit assez lev. o Assurez-vous que les haut-parleurs de votre ordinateur soient slectionns comme dispositif de lecture par dfaut de votre ordinateur (voir les instructions ci-dessous). (Le Air LP ne peut tre utilis comme priphrique de lecture pour votre ordinateur.) Il y a un bourdonnement provenant de mon haut-parleur, ordinateur portable ou appareil iOS lorsque jutilise la platine tourne-disque :
Si vous enregistrez sur un ordinateur :
Si vous utilisez un haut-parleur :
o Veuillez brancher lordinateur un cble dalimentation avec mise la terre (3 broches). o Veuillez brancher le haut-parleur un cble dalimentation avec mise la terre (3 broches). Mon disque ne joue pas la bonne vitesse, la tonalit est trop haute ou trop basse :
o Veuillez vous assurer que le slecteur de vitesse 33 / 45 / 78 est rgl sur la bonne vitesse pour votre enregistrement. Lenceinte Bluetooth que je dsire utiliser ne parvient pas se connecter la platine vinyle Air LP. o Dsactivez ou dplacez toutes les autres enceintes Bluetooth plus de 9,1 m afin que seulement lenceinte Bluetooth que vous souhaitez utiliser puisse se jumeler la platine. o Appuyez et relchez le bouton Bluetooth de la platine Air LP pour supprimer la connexion lenceinte Bluetooth, puis rappuyez une fois de plus pour relancer le processus de jumelage. o teignez la platine Air LP, puis rallumez-la et appuyez sur le bouton Bluetooth afin de relancer le processus de jumelage. o Utilisez le bouton volume de la platine Air LP afin daugmenter le niveau de sortie Bluetooth. Lenceinte Bluetooth est connecte, mais il ny a aucun signal audio. pas de signal audio, essayez d'appuyer sur la touche lecture/pause. Mon smartphone ne parvient pas se connecter la platine vinyle Air LP. o Si la platine est connecte une enceinte Bluetooth dote dune touche lecture/pause, et que vous nentendez o La platine vinyle Air LP agit comme un metteur Bluetooth en transmettant son signal vers dautres enceintes Bluetooth. La platine vinyle Air LP ne peut agir comme rcepteur et transmettre de la musique de votre smartphone vers un casque ou les sorties RCA. La DEL Bluetooth ne cesse de clignoter. o Une fois que vous appuyez sur la touche Bluetooth, la platine vinyle Air LP tente de se connecter aux enceintes Bluetooth proximit pendant 5 minutes. Pour arrter le clignotement de la DEL Bluetooth, effectuez une remise sous tension de la platine vinyle Air LP. Il y a de linterfrence dans le casque dcoute. o Appuyez sur le bouton Bluetooth de la platine Air LP pour supprimer la connexion lenceinte Bluetooth. Lorsque vous coutez la musique de la platine Air LP avec un casque, veuillez vous assurer que la platine Air LP n'est pas connect une enceinte Bluetooth. 20 Configurez le Air LP comme lappareil denregistrement par dfaut Windows XP : Clicquez sur Dmarrer Panneau de configuration (ou Paramtres Panneau de configuration en Affichage classique) Sons et priphriques audio. Cliquez sur longlet Audio et slectionnez Priphriques audio USB PnP par dfaut. Windows Vista : Cliquez sur Dmarrer Panneau de configuration (ou Paramtres Panneau de configuration en Affichage classique) Matriel et audio Son. Cliquez sur l'onglet Enregistrement et slectionnez Priphriques audio USB PnP par dfaut. Windows 7 : Cliquez sur Dmarrer Panneau de configuration Son. Cliquez sur l'onglet Enregistrement et slectionnez Priphriques audio USB PnP par dfaut. Windows 8 : Dans le menu Dmarrer, cliquez sur le coin infrieur gauche de l'cran pour afficher le bureau. Dans le coin infrieur droit de la commande de volume haut-parleur . Faites un clic droit sur licne du haut-parleur et slectionnez Priphriques de lecture. L'onglet Enregistrement du panneau de configuration Sons doit apparatre comme tant configur. Si Priphriques audio USB PnP ne dispose pas dun crochet, faites un clic droit et slectionnez Dfinir comme priphrique par dfaut. Mac : Cliquez sur la pomme (logo Apple) situe dans le coin suprieur gauche de lcran et slectionnez Prfrences Systme Sons. Cliquez sur longlet ntree. partir du menu, slectionnez Priphriques audio USB PnP. tches, recherchez la barre des licne de Configuration de la carte son de lordinateur comme priphrique de lecture audio par dfaut Windows XP : Clicquez sur Dmarrer Panneau de configuration (ou Paramtres Panneau de configuration en Affichage classique) Sons et priphriques audio. Cliquez sur longlet Audio et slectionnez la carte son de lordinateur comme priphrique de lecture audio par dfaut. Windows Vista : Cliquez sur Dmarrer Panneau de configuration (ou Paramtres Panneau de configuration en Affichage classique) Matriel et audio Son. Cliquez sur l'onglet Lecture et slectionnez la carte son de lordinateur comme priphrique de lecture audio par dfaut. Windows 7 : Cliquez sur Dmarrer Panneau de configuration Son. Cliquez sur l'onglet Lecture et slectionnez la carte son de lordinateur comme priphrique de lecture audio par dfaut. Windows 8 : Dans le menu Dmarrer, cliquez sur le coin infrieur gauche de l'cran pour afficher le bureau. Dans le coin infrieur droit de la commande de volume haut-parleur . Faites un clic droit sur licne du haut-parleur et slectionnez Priphriques de lecture. L'onglet Lecture du panneau de configuration Sons doit apparatre comme tant configur. Si la carte son de votre ordinateur ne dispose pas dun crochet, faites un clic droit et slectionnez Dfinir comme priphrique par dfaut. Mac : Cliquez sur la pomme (logo Apple) situe dans le coin suprieur gauche de lcran et slectionnez Prfrences Systme Sons. Cliquez sur longlet Sortie. partir du menu, slectionnez Haut-parleurs internes si vous utilisez les haut-parleurs internes de lordinateur, ou slectionnez couteurs si vous utilisez des haut-parleurs ou un casque dcoute branchs la sortie casque (1/8 po) de votre ordinateur. tches, recherchez la barre des licne de AVANT DE RETOURNER CE PRODUIT, veuillez communiquer avec le service technique de ION Audio ou votre dtaillant pour de lassistance. Vous trouverez les coordonnes pour nous rejoindre dans le livret des Consignes de scurit inclus avec ce produit. ionaudio.com/support 21 Spcifications techniques Dimensions de la platine vinyle Air LP
(Longueur x largeur x profondeur) Poids de la platine vinyle Air LP Alimentation lectrique de la platine vinyle Air LP Version Bluetooth de la platine vinyle Air LP Dimensions de lenceinte de la platine vinyle Air LP
(Longueur x largeur x profondeur) Alimentation lectrique de l'enceinte Air LP Puissance de l'enceinte Air LP Haut-parleurs de l'enceinte Air LP Fonction Bluetooth de la platine vinyle Air LP Fonction Bluetooth de lenceinte Air LP Version Bluetooth de lenceinte Air LP Porte Bluetooth Type de cartouche Cartouche et pointe de lecture 406 mm x 356 mm x 114 mm 16 po x 14 po x 4,5 po 3 kg (6,7 lb) 12 V CC, 0,2 A, fiche centre positif, pointe ngative BT 3.0 72 mm x 417 mm x 68 mm 2,8 po x 16,4 po x 2,7 po 9 V CC, 2 A 20 W (crte)
(2) haut-parleurs pleine gamme metteur Bluetooth Rcepteur Bluetooth BT 3.0 Jusqu' 9,1 m/30 pi*
Cramique Cartouche et pointe de lecture : CZ-800-10 avec pointe de lecture en saphir incluse. Vous pouvez vous procurer une cartouche de rechange sur le site ionaudio.com/products/details/CZ-800-10. Vous pouvez vous procurer une pointe de lecture iCT06rs pour 78 tours sur le site ionaudio.com/ict06rs. Toutes les spcifications sont susceptibles d'tre modifies sans pravis.
* La porte Bluetooth est affecte par les murs, les obstacles et le mouvement. Pour une performance optimale, placez le produit en visibilit directe afin qu'il ny ait aucune obstruction cre par des murs, des meubles, etc. La dure de vie de la batterie peut tre affecte par la temprature, lge du produit, ainsi que le niveau du volume dutilisation. 22 Guida rapida (Italiano) Introduzione Contenuti della confezione Assicurarsi che gli elementi elencati di seguito siano contenuti nella confezione:
Air LP Altoparlante Air LP Adattatore di alimentazione Air LP Adattatore di alimentazione Altoparlante Air LP Adattatore di alimentazione Coperchio antipolvere Cavo USB Cavo RCA Cavo Aux da 1/8 (3.5 mm) Adattatore 45 giri Tappetino in feltro CD recante il software Guida rapida Istruzioni di sicurezza e garanzia Assistenza Per conoscere le ultime informazioni in merito a questo prodotto (i requisiti di sistema complete, compatibilit, ecc) e per la registrazione del prodotto, recarsi alla pagina ionaudio.com. Schema dei collegamenti Elementi non elencati sotto Contenuti della confezione sono venduti separatamente. Dispositivo musicale
(opzionale) Altoparlante Air LP Alimentazione 23 Caratteristiche di Air LP 1. 2. 3. 4. 5. 6. 7. 8. 9. 11 10 9 8 4 3 2 1 5 6 7 Piatto Il disco va collocato qui. Supporto adattatore 45 giri Regge lincluso adattatore per 45 giri. Quando l'adattatore non in uso, pu essere collocato a questo livello. Braccio Il braccio pu essere alzato e abbassato a mano, premendo la levetta di sollevamento / abbassamento. Fermabraccio Questo fermabraccio dal design speciale fissa il braccio quando a riposo o quando non in uso. Il fermabraccio stato progettato in modo da restare sollevato quando sbloccato. Levetta di sollevamento / abbassamento Alza e abbassa il braccio. Interruttore 33 / 45 / 78 giri Questo interruttore regola i GIRI del piatto del giradischi. Nota bene: per i migliori risultati durante la riproduzione di dischi in vinile a 78 giri, servirsi di una puntina 78 (venduta separatamente). Servirsi unicamente di una puntina 78 con dischi in vinile a 78 giri. Acquistare la puntina 78 iCT06rs sulla pagina ionaudio.com/ict06rs. Interruttore Autostop Questo interruttore accende o spegne la funzione di arresto automatico. Quando la funzione "autostop" attiva, il piatto inizia a girare quando il braccio posato sul disco e smette di girare quando il disco arriva alla fine. (Quando la funzione autostop disattiva, il piatto continuer a girare, indipendentemente dalla posizione del braccio.) Nota: Se il vostro record di vinile si ferma prima di raggiungere il fine della musica, ruotare Autostop in posizione off per questo particolare record. Questo generalmente consigliato per 45 giri. Jack cuffie Collegare le cuffie (vendute separatamente) a questo riproduzione dei propri vinili. Tasto Bluetooth Premere questo tasto per avviare il collegamento Bluetooth. Se dopo 5 minuti non altoparlanti possibile Bluetooth il trasmettitore Bluetooth diventer inattivo e il LED si spegner. Se attualmente collegati, premere il tasto per scollegare un dispositivo Bluetooth attualmente collegato.
*AVVERTENZA: le uscite RCA sono a livello di LINEA. Collegarle unicamente a ingressi a livello di LINEA. Si rischia di danneggiare il ricevitore collegando un dispositivo a in un ingresso PHONO. 14 IMPORTANTE: collocare il tappetino in feltro in dotazione sul piatto; quindi posizionare il disco sul tappetino in modo che venga retto in maniera accurata. IMPORTANTE: rimuovere il cappuccio della cartuccia (copripuntina) prima di utilizzare il giradischi. livello per ascoltare 12 13 livello di LINEA individuare collegarsi, 15 16 cui la 10. LED Bluetooth Questo LED lampeggia durante il collegamento a un dispositivo Bluetooth. Una volta collegato, il LED rimarr fisso. Il LED sar spento quando il Bluetooth inattivo e quando l'Air LP spento. 11. Volume Regolare questo comando per controllare il livello di uscita delle cuffie e Bluetooth. 12. Uscita RCA* L'audio di un vinile riprodotto inviato a questa uscita audio RCA a livello di linea. Questa non va collegata a dispositivi a livello phono. Nota bene: se il vinile si ferma prima di raggiungere la fine della musica, spegnere la funzione Autostop per quel particolare disco. Di solito, ci consigliato per i dischi a 45 giri. 14. 15. 13. Uscita Audio USB Servirsi del cavo USB in dotazione per collegare il giradischi al computer. Il collegamento USB invier audio dal giradischi al computer. Si veda il paragrafo Uso dell'Air LP col computer di questo manuale per maggiori informazioni. Ingresso cavo di alimentazione Servirsi dell'adattatore in dotazione per collegarsi ad una presa a parete. Interruttore di alimentazione Premere questo tasto per accendere o spegnere l'Air LP. Il giradischi Air LP all'accensione si ricollega all'ultimo altoparlante Bluetooth utilizzato, se entro la portata del dispositivo. Ingresso Aux collegare un lettore CD, un lettore di media digitali o altre fonti audio a questo ingresso ausiliario stereo da 1/8". L'audio proveniente dall'ingresso Aux a sua volta trasmesso tramite un collegamento Bluetooth. 16. 24 Caratteristiche dellaltoparlante Air LP 1. Manopola Power/Volume rilasciare manopola power/volume per accendere il Air LP Speaker. Premere e il 2. LED manopola power/volume l'anello LED della manopola power/volume sar acceso di rosso fisso quando acceso e in modalit di collegamento. L'anello a LED sar acceso di blu fisso quando collegato a un dispositivo Bluetooth. 3. Jack di alimentazione collegare qui l'alimentazione da 12V CC, 1,6A in dotazione per alimentare l'altoparlante Air LP. 4. Ingresso Aux collegare un lettore CD, un lettore MP3 o altre fonti audio a questo ingresso stereo da 1/8" (3,5 mm). 1 2 3 4 Uso dell'altoparlante Air LP con l'Air LP L'Air LP dispone di un trasmettitore Bluetooth per l'invio di audio a un altoparlante Bluetooth senza fili. 1. Accendere il giradischi Air LP. 2. Premere e rilasciare il tasto Bluetooth sull'Air LP per avviare il collegamento del dispositivo Bluetooth. 3. Per accendere l'altoparlante Air LP, premere e rilasciare la manopola power/volume. L'anello LED della manopola power/volume sar acceso di rosso fisso quando acceso e in modalit di collegamento. 4. Una volta collegato il giradischi Air LP all'altoparlante Air LP, il LED Bluetooth sul giradischi Air LP sar fisso. L'anello a LED sull'altoparlante Air LP sar di colore blu fisso una volta collegato. Nota bene: l'Air LP si collegher all'altoparlante Bluetooth pi vicino. Se dopo 5 minuti non possibile individuare altoparlanti Bluetooth cui collegarsi, il trasmettitore Bluetooth diventer inattivo e il LED si spegner. 5. Riprodurre musica sul giradischi Air LP. 6. Regolare la manopola del volume sull'altoparlante Air LP Speaker girandola. 7. Per scollegare il collegamento, tenere premuta la manopola volume il Air LP Speaker per 2 secondi, oppure premere il tasto Bluetooth sul giradischi Air LP. L'anello LED sull'altoparlante Air LP torner rosso e il LED Bluetooth sul giradischi Air LP sar spento. Nota bene: spostare altri ricevitori/altoparlanti Bluetooth fuori dalla portata dell'Air LP (10 metri o pi) o spegnerli per collegare l'altoparlante Bluetooth. Collegamento dell'Air LP ad altri altoparlanti Bluetooth L'Air LP dispone di un trasmettitore Bluetooth per l'invio di audio a un altoparlante Bluetooth senza fili. 1. Accendere l'altoparlante Bluetooth e assicurarsi che si trovi in modalit di collegamento. 2. Accendere il giradischi Air LP. 3. Premere e rilasciare il tasto Bluetooth sull'Air LP per avviare il collegamento dell'altoparlante Bluetooth. Una volta collegato l'Air LP all'altoparlante Bluetooth, il LED Bluetooth sar blu fisso. L'altoparlante Bluetooth dovrebbe a sua volta indicare di essere collegato. Nota bene: l'Air LP si collegher all'altoparlante Bluetooth pi vicino. Se dopo 5 minuti non possibile individuare altoparlanti Bluetooth cui collegarsi, il trasmettitore Bluetooth diventer inattivo e il LED si spegner. Nota bene: la portata massima si ottiene servendosi di dispositivi dotati di Bluetooth 4.0 o superiore. 4. Riprodurre musica sul giradischi Air LP. Se si collegati a un altoparlante Bluetooth dotato di tasto play/pause e non si sente alcun audio, provare a premere il tasto play/pause. 5. Regolare il volume dellaltoparlante Bluetooth (se applicabile) o la manopola Volume sullAir LP per controllare il livello di uscita. 6. Per annullare il collegamento, spegnere il giradischi Air LP o il collegamento Bluetooth sull'altoparlante Bluetooth. Nota bene: spostare altri ricevitori/altoparlanti Bluetooth fuori dalla portata dell'Air LP (10 metri o pi) o spegnerli per collegare l'altoparlante Bluetooth. Uso dell'altoparlante Air LP con altri dispositivi Bluetooth 1. Accendere il dispositivo Bluetooth (smartphone, tablet, ecc.). 2. Premere e rilasciare il Manopola Power/Volume per accendere il Air LP Speaker. 3. L'anello LED della manopola power/volume sar acceso di rosso fisso quando acceso e in modalit di collegamento. fisso. 4. Recarsi alle impostazioni Bluetooth del dispositivo, trovare l'altoparlante Air LP e collegarlo. 5. Una volta collegato il dispositivo all'altoparlante Air LP, l'anello LED Bluetooth sull'altoparlante Air LP sar blu 6. Avviare la riproduzione di musica sul dispositivo Bluetooth. 7. Regolare la manopola del volume sull'altoparlante Air LP Speaker girandola. 8. Per scollegare il collegamento, tenere premuta la manopola volume il Air LP Speaker per 2 secondi. L'anello LED torner rosso. Alternativamente, possibile spegnere il Bluetooth sul dispositivo Bluetooth o selezionare Scollega dal menu impostazioni del dispositivo Bluetooth. 9. Per collegarlo ad un altro dispositivo Bluetooth, ripetere i passaggi di collegamento. 25 Uso di Air LP con il computer Registrazione Per registrare musica sul computer, possibile utilizzare il programma ION EZ Vinyl/Tape Converter e un cavo USB. L'EZ Vinyl/Tape Converter salva comodamente le registrazioni sul computer. Una volta terminato di convertire il vinile, lo si pu masterizzare su un CD o caricare su dispositivi media portatili. Per installare il software, inserire il CD in dotazione nel computer e seguire le istruzioni su schermo. 1. Una volta installato l'EZ Vinyl/Tape Converter sul computer, servirsi del cavo USB in dotazione per collegare la porta USB di Air LP ad una porta USB disponibile del computer. 2. Sul computer, possibile aprire l'EZ Vinyl/Tape Converter recandosi su Start Tutti i programmi (Windows) o su Applicazioni (Mac). 3. Seguire le istruzioni su schermo per configurare la registrazione. Quando viene richiesto di riprodurre la musica, muovere il braccio di Air LP sul disco per iniziare la riproduzione. Nota bene: per ascoltare un disco mentre viene riprodotto, servirsi degli altoparlanti del computer o collegare le uscite RCA di Air LP a un impianto stereo o a delle casse. Non collegarle a ingressi a livello phono: le uscite RCA di Air LP sono a livello di linea e potrebbero danneggiare un dispositivo con ingressi a livello phono. 4. Una volta terminato di registrare, alzare il braccio di Air LP dal disco e riportarlo sul poggiabraccio. Per maggiori informazioni su come ottimizzare il computer per l'audio, recarsi alla pagina ionaudio.com/computer-optimization. Riproduzione possibile ascoltare la musica sul computer tramite l'altoparlante interno o tramite un paio di cuffie ad esso collegate (il Air LP non pu essere utilizzato come dispositivo di riproduzione dell'audio del computer). Per ascoltare un disco mentre viene riprodotto, servirsi degli altoparlanti del computer o collegare le uscite RCA di Air LP a un impianto stereo o a delle casse. Non collegarle a ingressi a livello phono: le uscite RCA di Air LP sono a livello di linea e potrebbero danneggiare un dispositivo con ingressi a livello phono. 26 Risoluzione di problemi In caso di problemi, fare riferimento alle fasi di risoluzione dei problemi indicate qui di seguito, nonch a quanto indicato nel manuale dell'EZ Vinyl/Tape Converter in dotazione con il presente prodotto. Se si sta registrando su un computer:
o Assicurarsi che il Air LP sia acceso e che la puntina sia sul disco. o Assicurarsi che sia selezionato come periferica di registrazione predefinita del computer (si vedano le istruzioni qui di seguito). o Se si ascolta tramite le casse del computer, assicurarsi che queste siano selezionate come periferica di riproduzione predefinita del computer (si vedano le istruzioni qui di seguito). Alternativamente, collegare le uscite RCA di Air LP ad un impianto stereo o ad altoparlanti. Non collegarle a ingressi a livello phono:
le uscite RCA di Air LP sono a livello di linea e potrebbero danneggiare un dispositivo con ingressi a livello phono. (Nota bene: le uscite RCA monitorano il segnale che esce dal giradischi, non quello proveniente dal computer.) o Scollegare e ricollegare inoltre il cavo USB che unisce l'Air LP al computer. Non sento alcun audio durante la riproduzione di musica:
Se si riproduce musica da vinile:
o Assicurarsi che il Air LP sia acceso e che la puntina sia sul disco. o Collegare le uscite RCA di Air LP ad un impianto stereo o ad altoparlanti. (Non collegarle a ingressi a livello phono: le uscite RCA di Air LP sono a livello di linea e potrebbero danneggiare un dispositivo con ingressi a livello phono.) Se si riproduce musica dal computer:
o Assicurarsi che il volume del lettore musicale software sia acceso. o Assicurarsi che il volume del computer sia acceso. o Assicurarsi che le casse del computer siano selezionate come periferica di riproduzione predefinita del computer (si vedano le istruzioni qui di seguito). (il Air LP non pu essere utilizzato come periferica di riproduzione per l'audio del computer.) Durante l'uso del giradischi sento un ronzio tramite l'altoparlante o il portatile. Se si sta registrando su un computer portatile:
o collegare il computer ad un'alimentazione con messa a terra (3 denti) Se si sta riproducendo musica con un altoparlante:
o collegare il dispositivo ad un'alimentazione con messa a terra (3 denti). Il mio disco non suona alla giusta velocit; il pitch troppo alto o troppo basso:
o Assicurarsi che l'interruttore 33 / 45 / 78 sia impostato sulla velocit giusta per il disco specifico. L'altoparlante Bluetooth che voglio non si collega all'Air LP. o Spegnere o spostare altri altoparlanti Bluetooth nelle vicinanze a oltre 10 metri in modo che solo l'altoparlante Bluetooth pi vicino desiderato si colleghi. o Premere e rilasciare il tasto Bluetooth dellAir LP per scollegarlo dallaltoparlante Bluetooth, quindi premerlo nuovamente per collegarlo ancora. o Spegnere lAir LP e riaccenderlo, quindi premere il tasto Bluetooth per collegarlo nuovamente. o Servirsi della manopola volume dellAir LP per alzare il livello delluscita Bluetooth. Sono collegato a un altoparlante Bluetooth, ma non sento alcun audio. o Se si collegati a un altoparlante Bluetooth dotato di tasto play/pause e non si sente alcun audio, provare a premere il tasto play/pause. Il mio smartphone non si collega al giradischi Air LP. o Il giradischi Air LP agisce da trasmettitore Bluetooth inviando l'audio dall'Air LP ad altri altoparlanti Bluetooth. Il giradischi Air LP non pu agire da ricevitore Bluetooth e riprodurre musica dallo smartphone su cuffie o uscite RCA. Il LED Bluetooth non smette di lampeggiare. Sento rumore statico in cuffia. o Una volta premuto il tasto Bluetooth, l'Air LP cercher di collegarsi agli altoparlanti Bluetooth pi vicini per 5 minuti. Per interrompere il lampeggio del LED Bluetooth riaccendere l'Air LP. o Premere il tasto Bluetooth dellAir LP per scollegarlo da un altoparlante Bluetooth collegato. Quando si ascolta lAir LP con le cuffie, assicurarsi sempre che lAir LP non sia collegato a un altoparlante Bluetooth allo stesso tempo. 27 Configurare l'Air LP come dispositivo di registrazione predefinito Windows XP: Cliccare su Start Pannello di controllo (o Impostazioni Pannello di controllo in visualizzazione classica) Suoni e periferiche audio. Cliccare sulla scheda Audio e sotto Registrazione audio, selezionare Dispositivo audio PnP USB come periferica predefinita. Windows Vista: Cliccare su Start Pannello di controllo (o Impostazioni Pannello di controllo in visualizzazione classica) Suoni e periferiche audio. Cliccare sulla scheda Registrazione e selezionare Dispositivo audio PnP USB come periferica predefinita. Windows 7: Cliccare su Start Pannello di controllo Audio. Cliccare sulla scheda Registrazione e selezionare Dispositivo audio PnP USB come periferica predefinita. Windows 8: Nel menu Start, cliccare sull'angolo inferiore sinistro dello schermo per passare al Desktop. Nell'angolo inferiore destro della Barra delle applicazioni, individuare l'icona "Speaker" di controllo del Volume. Fare click col tasto destro del mouse e selezionare Dispositivi di riproduzione. Nel pannello di controllo Audio di Windows selezionare la scheda Registrazione. Se il Dispositivo audio PnP USB non presenta un segno di spunta verde, fare click col destro e selezionare Imposta come dispositivo predefinito. Mac: Cliccare sull'icona della "mela" in alto a sinistra, quindi cliccare su Preferenze di sistema Audio. Fare clic sulla scheda Input. Dal menu, selezionare Dispositivo audio PnP USB come periferica. Configurazione della scheda audio del computer come dispositivo di riproduzione predefinito Windows XP: Cliccare su Start Pannello di controllo (o Impostazioni Pannello di controllo in visualizzazione classica) Suoni e periferiche audio. Cliccare sulla scheda Audio e sotto Riproduzione audio, selezionare la scheda audio del computer come periferica predefinita. Windows Vista: Cliccare su Start Pannello di controllo (o Impostazioni Pannello di controllo in visualizzazione classica) Hardware e suoni Audio. Cliccare sulla scheda Riproduzione e selezionare la scheda audio del computer come periferica predefinita. Windows 7: Cliccare su Start Pannello di controllo Audio. Cliccare sulla scheda Riproduzione e selezionare la scheda audio del computer come periferica predefinita. Windows 8: Nel menu Start, cliccare sull'angolo inferiore sinistro dello schermo per passare al Desktop. Nell'angolo inferiore destro della Barra delle applicazioni, individuare l'icona "Speaker" di controllo del Volume. Fare click col tasto destro del mouse e selezionare Dispositivi di riproduzione. Il pannello di controllo Audio di Windows dovrebbe comparire sulla scheda Riproduzione. Se la scheda audio del computer non presenta un segno di spunta verde, fare click col destro e selezionare Imposta come dispositivo predefinito. Mac: Cliccare sull'icona della "mela" in alto a sinistra, quindi cliccare su Preferenze di sistema Audio. Cliccare sulla scheda Output. Nel menu, selezionare Internal Speakers se si utilizzano le casse interne del computer o Cuffie se si utilizzano casse o cuffie collegate all'uscita cuffie da 1/8" del computer. PRIMA DI RENDERE QUESTO PRODOTTO, contattare ION Audio o il proprio rivenditore per ricevere assistenza tecnica. I dati di contatto si trovano nel libretto di istruzioni di sicurezza in dotazione con il prodotto. ionaudio.com/support 28 Specifiche tecniche Dimensioni del giradischi Air LP
(lunghezza x larghezza x profondit) 406 mm x 356 mm x 114 mm 16 x 14 x 4,5 Peso del giradischi Air LP 6,7 lbs. (3 kg) Alimentazione del giradischi Air LP Versione Bluetooth del giradischi Air LP Dimensioni dell'altoparlante Air LP
(lunghezza x larghezza x profondit) Alimentazione dell'altoparlante Air LP Wattaggio dell'altoparlante Air LP Driver dell'altoparlante Air LP Funzione Bluetooth del giradischi Air LP Funzione Bluetooth dell'altoparlante Air LP Versione Bluetooth dell'altoparlante Air LP Portata Bluetooth Tipo di cartuccia Cartuccia e puntina 12V CC, 0,2A, polo centrale positivo, punta negativa BT 3.0 72 mm x 417 mm x 68 mm 2,8 x 16,4 x 2,7 9V CC, 2A 20 W (picco) 2 driver a gamma completa da 2"
Trasmettitore Bluetooth Ricevitore Bluetooth BT 3.0 Fino a 30' / 9,1 m*
Ceramica Cartuccia e puntina: CZ-800-10 (con punta in zaffiro) in dotazione e disponibile alla pagina ionaudio.com/products/details/CZ-800-10. Per una puntina a 78 giri disponibile l'iCT06rs alla pagina ionaudio.com/ict06rs. Le specifiche tecniche possono variare senza preavviso.
* La portata del Bluetooth influenzata da pareti, ostacoli e movimento. Per ottenere prestazioni ottimali, collocare il prodotto nella stanza con linea d'aria libera in modo che non sia ostacolato da pareti, mobili, ecc. La durata della batteria varia a seconda della temperatura, dellet e del volume di utilizzo del prodotto. 29 Schnellstart-Anleitung (Deutsch) Einfhrung Lieferumfang Vergewissern Sie sich, dass alle hier angefhrten Komponenten in der Schachtel enthalten sind:
Air LP Air LP Lautsprecher Air LP Netzteil Air LP Lautsprechernetzteil Netzteil Staubabdeckung USB-Kabel RCA-Kabel 1/8 (3.5 mm) Aux-Kabel 45 RPM Adapter Filz-Slipmat Software-CD Schnellstart-Anleitung Sicherheitshinweise und Garantieinformationen Kundendienst Fr aktuelledie neuesten Informationen zu diesem Produkt (Systemanforderungen, Informationen zur Kompatibilitt etc.) und zur Produktregistrierung besuchen Sie ionaudio.com. Anschlussdiagramm Teile, die nicht im Lieferumfang angegeben sind, sind separat erhltlich. Air LP Lautsprecher Musik-Player
(optional) Strom 30 3. 4. 5. 6. 7. 8. 9. Air LP Funktionen 1. 2. Plattenteller Hier platzieren Sie Ihre Schallplatte. 45 RPM-Adapterhalterung Sichert den mitgelieferten 45 RPM-Adapter. Wenn Sie den Adapter nicht verwenden, legen Sie ihn bitte in diese Haltevorrichtung. Tonarm Der Tonarm kann mit der Hand oder durch Drcken des entsprechenden Hebels angehoben und abgesenkt werden. Arm-Clip Dieser speziell entworfene Arm-Clip sichert den Tonarm, wenn er nicht verwendet wird. Der Arm-Clip wurde so entwickelt, dass er in der oberen Position bleibt, wenn er entsperrt ist. Hebel Hebt und senkt den Tonarm. 33 / 45 / 78 RPM-Schalter Regelt die Geschwindigkeit (RPM) des Plattentellers. Hinweis: Fr die Wiedergabe von 78 RPM Schallplatten verwenden Sie idealerweise eine 78 RPM-Nadel (separat erhltlich). Verwenden Sie fr 78 RPM Schallplatten ausschlielich 78 RPM-Nadeln. Kaufen Sie eine iCT06rs 78 Nadel auf ionaudio.com/ict06rs. 2 3 1 4 5 6 7 9 11 10 8 WICHTIG: Legen Sie die mitgelieferte Filz-Slipmat Plattenteller. Anschlieend legen Sie Ihre Platte auf die Filz-Slipmat, um einen sicheren Sitz zu gewhrleisten. den auf Autostop-Schalter Dieser Schalter schaltet Autostop an oder aus. Wenn Autostop eingeschaltet ist, wird der Plattenteller zu rotieren beginnen, sobald der Tonarm ber die Schallplatte gelegt wird und stoppen, wenn die Platte das Ende erreicht hat. (Wenn Autostop ausgeschaltet ist, wird sich der Plattenteller immer und unabhngig von der Position des Tonarms drehen.) Hinweis: Wenn der Vinyl-Schallplatte stoppt, bevor sie das Ende der Musik erreicht, schalten Sie Autostop in die Position fr diesen bestimmten Datensatz. Dieser ist in der Regel fr 45 RPM Records empfohlen. Kopfhrerbuchse Schlieen Sie Kopfhrer an (separat erhltlich), um Ihre Schallplatten anzuhren. Bluetooth-Taste Drcken Sie diese Taste, um die Bluetooth-Verbindung zu starten. Wenn nach 5 Minuten keine Bluetooth-Lautsprecher fr eine Verbindung gefunden werden knnen, wird der Bluetooth-
Sender inaktiv und die LED erlischt. Wenn die Gerte derzeit verbunden sind, drcken Sie diese Taste, um alle derzeit verbundenen Bluetooth-
Gerte zu trennen. Entfernen WICHTIG:
die Kunststoffabdeckung des Tonabnehmers
(Nadelabdeckung) den Plattenspieler verwenden. bevor Sie Sie
*WARNUNG: Die Cinch-Ausgnge sind line-pegel. Bitte nur verbinden um line-
pegel knnten beschdigen Ihre Empfnger wenn Sie Verbindung Die Cinch-Ausgnge des Air LP sind zu einem Phono-Eingngen. Eingngen. Sie 14 16 12 13 15 10. Bluetooth-LED Diese LED blinkt, wenn eine Verbindung zu einem Bluetooth-Gert hergestellt wird. Ist eine Verbindung vollstndig hergestellt, leuchtet die LED durchgehend. Die LED erlischt, wenn Bluetooth deaktiviert wurde und Air LP ausgeschaltet ist. 11. Lautstrk Passen Sie dies an, um den Ausgangspegel von Kopfhrer und Bluetooth einzustellen. 12. Cinch-Ausgang* Die Audiosignale von einer Vinyl-Schallplatte, die gerade abgespielt wird, wird an diesen Line-Level-RCA-Ausgang gesendet. Dieser darf nicht mit Phono-Level-Gerten verbunden werden. Hinweis: Wenn Ihr Schallplatte stoppt, bevor sie das Ende des Songs erreicht hat, bringen Sie Autostop fr diese spezielle Schallplatte in die Position AUS. Dies wird in der Regel auch fr 45 RPM Schallplatten empfohlen. 13. USB-Audioausgang Schlieen Sie Ihren Plattenspieler mit dem mitgelieferten USB-Kabel an Ihren Computer an. Die USB-Verbindung sendet das Audiosignal vom Plattenspieler an Ihren Computer. Bitte beachten Sie den Abschnitt So Verwenden Sie Air LP Mit Ihrem Computer in diesem Handbuch fr weitere Informationen. 14. Netzkabel-Eingang Verwenden Sie den mitgelieferten Adapter, um ihn mit einer Steckdose zu verbinden. 15. Ein-/Ausschalter Drcken Sie diese Taste, um Air LP ein- oder auszuschalten. Beim Einschalten des Air LP Plattenspielers wird wieder die Verbindung zum zuletzt verwendeten Bluetooth-Lautsprecher hergestellt, falls sich dieser in Reichweite befindet. 16. Aux-Eingang Schlieen Sie einen CD-Player, digitalen Medien-Player oder eine andere Audioquelle an diesen 1/8" AUX-Stereoeingang an. Das Audiosignal vom Aux-Eingang wird ebenfalls ber eine Bluetooth-
Verbindung bertragen. 31 Air LP Lautsprecherfunktionen 1. Lautstrkeregler Schalter/Ein Drcken Sie kurz auf Sie den Ein-/schalter lautstrkeregler, um den Air LP Speaker einzuschalten. 2. Power/Lautstrkeregler-LED Der LED-Ring des Power/Lautstrkereglers wird durchgehend rot leuchten, wenn das Gert eingeschaltet ist und sich im Koppel-
Modus befindet. Der LED-Ring wird durchgehend blau leuchten, wenn das Gert an ein Bluetooth-Gert angeschlossen ist. 1 2 3 4 3. Netzanschluss Schlieen Sie das mitgelieferte 12V DC, 1,6 A Netzteil hier an, um den Air LP Lautsprecher mit Strom zu versorgen. 4. Aux-Eingang Dieser 3,5mm-Stereoeingang (1/8) kann dazu verwendet werden, einen CD-Player, MP3-Player oder eine andere Audioquelle anzuschlieen. Verwendung des Air LP Lautsprechers mit dem Air LP Der Air LP hat einen Bluetooth-Sender, um Audiosignale drahtlos an einen Bluetooth-Lautsprecher zu senden. 1. Schalten Sie den Air LP Plattenspieler ein. 2. Drcken Sie kurz auf die Bluetooth-Taste am Air LP, um eine Verbindung zu Ihrem Bluetooth-Gert herzustellen. 3. Zum Einschalten des Air LP Lautsprechers drcken Sie kurz auf Sie den Power/Lautstrkeregler. Der LED-Ring des Power/Lautstrkereglers wird durchgehend rot leuchten, um anzuzeigen, dass das Gert eingeschaltet ist und sich im Koppel-Modus befindet. 4. Sobald der Air LP Plattenspieler mit einem Air LP Lautsprecher verbunden ist, wird die Bluetooth-LED am Air LP Plattenspieler durchgehend leuchten. Der LED-Ring am Air LP Lautsprecher wird konstant blau leuchten, sobald er verbunden ist. Hinweis: Ihr Air LP wird mit dem nchstgelegenen Bluetooth-Lautsprecher gekoppelt. Wenn nach 5 Minuten kein Bluetooth-Lautsprecher fr eine Verbindung gefunden werden kann, wird der Bluetooth-Sender inaktiv und die LED erlischt. 5. Spielen Sie Musik auf Ihrem Air LP Plattenspieler. 6. Stellen Sie den Lautstrkeregler am Air LP Lautsprecher durch Drehen des Reglers ein. 7. Um die Verbindung zu trennen, halten Sie den Lautstrkeregler Schalter auf Air LP Speaker 2 Sekunden lang gedrckt, oder drcken die Bluetooth-Taste am Air LP Plattenspieler. Der LED-Ring am Air LP Lautsprecher wechselt auf Rot zurck und die Bluetooth-LED am Air LP Plattenspieler erlischt. Hinweis: Bringen Sie andere Bluetooth-Empfnger/-Lautsprecher auer Reichweite des Air LP (mindestens 30) oder schalten Sie sie ab, um eine Verbindung mit Ihrem Bluetooth-Lautsprecher herzustellen. Den Air LP mit anderen Bluetooth-Lautsprechern koppeln Der Air LP hat einen Bluetooth-Sender, um Audiosignale drahtlos an einen Bluetooth-Lautsprecher zu senden. 1. Schalten Sie Ihren Bluetooth-Lautsprecher ein, um sicherzustellen, dass er sich im Koppel-Modus befindet. 2. Schalten Sie den Air LP Plattenspieler ein. 3. Drcken Sie kurz auf die Bluetooth-Taste am Air LP, um eine Verbindung zu Ihrem Bluetooth-Lautsprecher herzustellen. Sobald der Air LP mit einem Bluetooth-Lautsprecher verbunden ist, wird die Bluetooth-LED durchgehend blau leuchten. Auch Ihr Bluetooth-Lautsprecher sollte anzeigen, dass er gekoppelt wurde. Hinweis: Ihr Air LP wird mit dem nchstgelegenen Bluetooth-Lautsprecher gekoppelt. Wenn nach 5 Minuten kein Bluetooth-Lautsprecher fr eine Verbindung gefunden werden kann, wird der Bluetooth-Sender inaktiv und die LED erlischt. Hinweis: Die maximale Reichweite wird erzielt, wenn Sie Gerte mit Bluetooth 4.0 oder hher verwenden. 4. Spielen Sie Musik auf Ihrem Air LP Plattenspieler. Wenn Sie mit einem Bluetooth-Lautsprecher mit einer Wiedergabe-/Pause-Taste verbunden sind und keinen Ton hren, drcken Sie die Wiedergabe-/Pause-Taste. Stellen Sie die Lautstrke auf Ihrem Bluetooth-Lautsprecher (falls vorhanden) ein oder verwenden Sie den 5. Lautstrkeregler am Air LP, um den Ausgangspegel anzupassen. 6. Schalten Sie den Air LP Plattenspieler aus oder schalten Sie Bluetooth auf Ihrem Bluetooth-Lautsprecher aus. Hinweis: Bringen Sie andere Bluetooth-Empfnger/-Lautsprecher auer Reichweite des Air LP (mindestens 30) oder schalten Sie sie ab, um eine Verbindung mit Ihrem Bluetooth-Lautsprecher herzustellen. 32 Verwendung des Air LP Lautsprechers mit anderen Bluetooth-Gerten 1. Schalten Sie Ihr Bluetooth-Gert ein (Smartphone, Tablet etc.). 2. Drcken Sie kurz auf Sie den Ein-/schalter lautstrkeregler, um den Air LP Speaker einzuschalten. 3. Der LED-Ring des Power/Lautstrkereglers wird durchgehend rot leuchten, um anzuzeigen, dass das Gert eingeschaltet ist und sich im Koppel-Modus befindet. 4. Navigieren Sie zu den Bluetooth-Einstellungen Ihres Gerts, suchen nach Air LP Lautsprecher und stellen eine Verbindung her. durchgehend blau. 5. Sobald Ihr Gert mit dem Air LP Lautsprecher verbunden ist, leuchtet der Bluetooth-Ring am Air LP Lautsprecher 6. Spielen Sie auf Ihrem Bluetooth-Gert Musik ab. 7. Stellen Sie den Lautstrkeregler am Air LP Lautsprecher durch Drehen ein. 8. Um die Verbindung zu trennen, halten Sie den Lautstrkeregler Schalter auf Air LP Speaker 2 Sekunden lang gedrckt. Der LED-Ring wechselt zurck auf Rot. Wahlweise knnen Sie die Bluetooth-Funktion auch am Bluetooth-Gert ausschalten oder im Einstellungsmen Ihres Bluetooth-Gerts Verbindung trennen" whlen. 9. Um eine Verbindung zu einem anderen Bluetooth-Gert herzustellen, wiederholen Sie die Schritte zum Herstellen einer Verbindung. So verwenden Sie Air LP mit Ihrem Computer Aufnahme Um Musik mit Ihrem Computer aufzunehmen, knnen Sie ION EZ Vinyl/Tape Converter und ein USB-Kabel verwenden. EZ Vinyl/Tape Converter speichert Ihre Aufnahmen direkt mit Ihrem Computer. Nachdem Sie Ihre Schallplatten konvertiert haben, knnen Sie sie auf CD brennen oder auf tragbare Mediengerte laden. Zur Installation der Software legen Sie einfach die mitgelieferte CD in Ihren Computer ein und folgen den Anweisungen auf dem Bildschirm. 1. Wenn Sie EZ Vinyl/Tape Converter auf Ihrem Computer installiert haben, verwenden Sie das mitgelieferte USB-
Kabel, um den USB-Port des Air LP mit einem freien USB-Port Ihres Computers zu verbinden. 2. Um EZ Vinyl/Tape Converter auf Ihrem Computer zu ffnen, whlen Sie Startmen Alle Programme
(Windows) oder das Anwendungen-Men (Mac). 3. Befolgen Sie die Anweisungen auf dem Bildschirm, um Ihre Aufnahme vorzubereiten. Wenn Sie aufgefordert werden, Ihre Musik zu spielen, bringen Sie den Tonarm des Air LP ber die Platte und starten die Wiedergabe. Hinweis: Um sich eine Platte whrend der Wiedergabe anzuhren, knnen Sie die Lautsprecher Ihres Computers verwenden oder die Cinch-Ausgnge des Air LP an eine Stereoanlage oder Aktivlautsprecher anschlieen. Verbinden Sie sie nicht mit Phono-Eingngen; Die Cinch-Ausgnge des Air LP sind Line-Verbindungen und knnten ein Gert mit Phono-Eingngen beschdigen. 4. Wenn Sie die Aufnahme beendet haben, heben Sie den Air LP-Tonarm von der Platte und setzen ihn zurck in den Arm-Clip. Besuchen Sie ionaudio.com/computer-optimization fr weitere Informationen zur Optimierung Ihres Computers fr Audio. Wiedergabe Sie knnen die Musik auf Ihrem Computer ber seine internen Lautsprecher oder ber die angeschlossen Kopfhrer hren. (Air LP kann nicht als Abspielgert fr Audio Ihres Computers verwendet werden.) Um eine Platte whrend der Wiedergabe anzuhren, knnen Sie die Lautsprecher Ihres Computers verwenden oder die Cinch-Ausgnge des Air LP an eine Stereoanlage oder Aktivlautsprecher anschlieen. Verbinden Sie sie nicht mit Phono-Eingngen; Die Cinch-Ausgnge des Air LP sind Line-Verbindungen und knnten ein Gert mit Phono-
Eingngen beschdigen. 33 Fehlerbehebung Wenn Sie Schwierigkeiten mit dem Produkt haben, lesen Sie bitte die unten aufgefhrten Schritte zur Fehlerbehebung und das mitgelieferte EZ Vinyl/Tape Converter Handbuch. Wenn Sie auf einen Computer aufnehmen:
o Stellen Sie sicher, dass Air LP eingeschaltet und die Nadel auf der Schallplatte ist. o Stellen Sie sicher, dass Air LP in Ihrem Computer als standardmiges Aufnahmegert ausgewhlt ist
(siehe Anleitung unten). o Wenn Sie die Lautsprecher Ihres Computers verwenden, stellen Sie sicher, dass diese Lautsprecher als standardmige Wiedergabe-Gerte Ihres Computer ausgewhlt sind (siehe Anleitung unten). Alternativ knnen Sie die Cinch-Ausgnge des Air LP an eine Stereoanlage oder an Aktivlautsprecher anschlieen. Verbinden Sie sie nicht mit Phono-Eingngen; Die Cinch-Ausgnge des Air LP sind Line-
Verbindungen und knnten ein Gert mit Phono-Eingngen beschdigen. (Hinweis: Die Cinch-Ausgnge berwachen das Signal vom Plattenspieler, nicht das Signal Ihres Computers.) o Stecken Sie auch das USB-Kabel, das den Air LP mit Ihrem Computer verbindet, zuerst ab und anschlieend wieder ein. Ich kann bei der Musikwiedergabe nichts hren:
Wenn Sie Vinylplatten spielen:
o Stellen Sie sicher, dass Air LP eingeschaltet und die Nadel auf der Schallplatte ist. o Verbinden Sie die Cinch-Ausgnge des Air LP mit einer Stereoanlage oder mit Aktivlautsprechern.
(Verbinden Sie sie nicht mit Phono-Eingngen; Die Cinch-Ausgnge des Air LP sind Line-Verbindungen und knnten ein Gert mit Phono-Eingngen beschdigen.) Wenn Sie Musik von Ihrem Computer spielen:
o Achten Sie darauf, dass die Lautstrke Ihres Musik-Players aufgedreht ist. o Achten Sie darauf, dass die Lautstrke Ihres Computers aufgedreht ist. o Achten Sie darauf, dass die Lautsprecher Ihres Computers als standardmiges Wiedergabe-
Gert fr Ihren Computer ausgewhlt sind (siehe Anleitung unten). (Air LP kann nicht als Abspielgert fr Audio Ihres Computers verwendet werden.) Wenn ich den Plattenspieler verwende, hre ich ein Summen durch meine Lautsprecher, oder meinen Laptop Wenn Sie mit einem Laptop aufnehmen:
o Bitte verbinden Sie den Laptop an eine geerdete Stromquelle (3 polig) Wenn Sie ber einen Lautsprecher spielen:
o Bitte verbinden Sie diesen mit einer geerdeten (3 poligen) Stromquelle. Meine Schallplatte wird nicht mit der richtigen Geschwindigkeit wiedergegeben. Die Tonlage ist zu hoch oder zu tief:
o Stellen Sie sicher, dass der 33/45/78-Schalter fr diese Schallplatte auf die entsprechende Geschwindigkeit eingestellt ist. Der gewnschte Bluetooth-Lautsprecher kann keine Verbindung zum Air LP herstellen. o Schalten Sie in der Nhe befindliche Bluetooth-Lautsprecher aus oder verschieben Sie andere Bluetooth-Lautsprecher mehr als 30, so dass nur der gewnschte nchste Bluetooth-Lautsprecher gekoppelt wird. o Drcken Sie kurz auf die Bluetooth-Taste des Air LP, um das Gert vom Bluetooth-Lautsprecher zu trennen. Drcken Sie erneut auf diese Taste, um nocheinmal zu versuchen, eine Verbindung herzustellen. o Schalten das Air LP aus und wieder ein. Drcken Sie anschlieend die Bluetooth-Taste, um erneut zu versuchen, eine Verbindung herzustellen. o Verwenden Sie den Lautstrkeregler am Air LP, um den Bluetooth-Ausgangspegel anzupassen. Ich bin mit einem Bluetooth-Lautsprecher verbunden, hre aber keinen Ton. o Wenn Sie mit einem Bluetooth-Lautsprecher mit einer Wiedergabe-/Pause-Taste verbunden sind und keinen Ton hren, drcken Sie die Wiedergabe-/Pause-Taste. Mein Smartphone kann keine Verbindung zum Air LP Plattenspieler herstellen. o Der Air LP Plattenspieler agiert als Bluetooth-Sender und sendet die Audiosignale vom Air LP an andere Bluetooth-Lautsprecher. Der Air LP Plattenspieler kann nicht als Bluetooth-Empfnger agieren und Musik von Ihrem Smartphone ber Kopfhrer oder Cinch-Ausgnge abspielen. Die Bluetooth-LED wird kontinuierlich blinken. o Sobald die Bluetooth-Taste gedrckt wird, wird Air LP versuchen mit den nchstgelegenen Bluetooth-
Lautsprechern innerhalb von 5 Minuten eine Verbindung herzustellen. Um die blinkende Bluetooth-LED zu stoppen, schalten Sie Air LP aus und wieder ein. Ich hre Strgerusche in meinen Kopfhrern. o Drcken Sie die Bluetooth-Taste am Air LP, um es von einem gekoppelten Bluetooth-Lautsprecher zu trennen. Wenn Sie Kopfhrer verwenden, achten Sie stets darauf, dass das Air LP nicht gleichzeitig mit einem Bluetooth-Lautsprecher verbunden ist. 34 Air LP als Standard-Aufnahmegert einstellen auf der und Audiogerte. Klicken Sie klassischen Ansicht) Sound Windows XP: Klicken Sie auf Startmen Systemsteuerung (oder Einstellungen Systemsteuerung in die Registerkarte Audio unter Aufnahme und whlen Sie USB PnP-Audiogert als Standard-Gert aus. Windows-Vista: Klicken Sie Startmen Systemsteuerung (oder Einstellungen Systemsteuerung in der klassischen Ansicht) Hardware und Sound Ton. Klicken Sie auf die Registerkarte Aufnahme und whlen Sie USB PnP-Audiogert als Standard-Gert. Windows 7: Whlen Sie Startmen Systemsteuerung Ton. Klicken Sie auf die Registerkarte Aufnahme und whlen Sie USB PnP-Audiogert als Standard-Gert. Windows 8: Klicken Sie im Startmen auf die linke untere Ecke des Bildschirms, um zum Desktop zu gelangen. Klicken Sie in der rechten unteren Ecke der Taskleiste auf das "Lautsprechersymbol". Klicken Sie mit der rechten Maustaste auf den Lautsprecher und whlen Wiedergabegerte. In der Windows-
Systemsteuerung fr Sound whlen Sie die Registerkarte Aufnahme. Wenn neben USB PnP-
Audiogert kein grnes "Hkchen"-Symbol angezeigt wird, klicken Sie mit der rechten Maustaste auf Air LP und whlen Als Standardgert festlegen. Mac: Klicken Sie auf das obere linke "Apfel"-Symbol und klicken dann auf Systemeinstellungen Ton. Klicken Sie auf die Registerkarte Input. Whlen Sie USB PnP-Audiogert im Men als Gert aus. So stellen Sie die Soundkarte des Computers als Standard-Wiedergabegert ein Windows XP: Klicken Sie auf Startmen Systemsteuerung (oder Einstellungen Systemsteuerung in der klassischen Ansicht) Sound und Audiogerte. Klicken Sie auf die Registerkarte Audio und whlen unter Soundwiedergabe Ihre Computer-Soundkarte als Standardgert. Windows-Vista: Klicken Sie Startmen Systemsteuerung (oder Einstellungen Systemsteuerung in der klassischen Ansicht) Hardware und Sound Ton. Klicken Sie auf die Registerkarte Wiedergabe und whlen Sie Ihre Computer-Soundkarte als Standardgert aus. Windows 7: Whlen Sie Startmen Systemsteuerung Ton. Klicken Sie auf die Registerkarte Wiedergabe und whlen Sie Ihre Computer-Soundkarte als Standardgert aus. Windows 8: Klicken Sie im Startmen auf die linke untere Ecke des Bildschirms, um zum Desktop zu gelangen. Klicken Sie in der rechten unteren Ecke der Taskleiste auf das "Lautsprechersymbol". Klicken Sie mit der rechten Maustaste auf den Lautsprecher und whlen Wiedergabegerte. Die Windows-
Systemsteuerung fr Sound sollte nun unter der Registerkarte Wiedergabe aufscheinen. Wenn neben der Soundkarte Ihres Computers kein grnes "Hkchen"-Symbol aufscheint, klicken Sie mit der rechten Maustaste auf die Soundkarte und whlen Als Standardgert festlegen. Mac: Klicken Sie auf das obere linke "Apfel"-Symbol und klicken dann auf Systemeinstellungen Ton. Klicken Sie auf die Registerkarte Ausgabe. Aus dem Men whlen Sie Interne Lautsprecher, wenn Sie die internen Computerlautsprecher verwenden oder Kopfhrer, wenn Sie Lautsprecher oder Kopfhrer verwenden, die ber den 1/8"-Kopfhrerausgang an den Computer angeschlossen sind. BEVOR SIE DIESES PRODUKT EINSENDEN, kontaktieren Sie bitte ION Audio oder Ihren Hndler fr technischen Support. Die Kontaktinformationen finden Sie in den Sicherheitshinweisen, die diesem Produkt beiliegen. ionaudio.com/support 35 Technische Daten Air LP Plattenspieler Abmessungen
(Lnge x Breite x Tiefe) Air LP Plattenspieler Gewicht Air LP Plattenspieler Netzteil Air LP Plattenspieler Bluetooth-Version Air LP Lautsprecher-
Abmessungen (Lnge x Breite x Tiefe) Air LP Lautsprecherleistung Air LP Lautsprecher-
Wattleistung Air LP Lautsprecher-
Treiber Air LP Plattenspieler Bluetooth-Funktion Air LP Lautsprecher Bluetooth-Funktion Air LP Lautsprecher Bluetooth-Version Bluetooth-Reichweite Tonabnehmerart Tonabnehmer und Nadel 16" x 14" x 4,5"
406 mm x 356 mm x 114 mm 6,7 Pfund (3 kg) 12V DC, 0,2A, mittlerer Pin mit positiver Polaritt, Spitze negative BT 3.0 2,8 x 16,4 x 2,7 72 mm x 417 mm x 68 mm 9V DC, 2A 20 W (Spitze)
(2) 2" Full-Range-Treiber Bluetooth-Sender Bluetooth-Empfnger BT 3.0 Bis zu 30'/ 9,1 m*
Keramik Tonabnehmer und Nadel: CZ-800-10 (mit Saphirspitze) ist im Lieferumfang enthalten und auch auf ionaudio.com/products/details/CZ-800-10 erhltlich. Die 78 RPM-Nadel iCT06rs ist auf ionaudio.com/ict06rs verfgbar. Die Spezifikationen knnen ohne Ankndigung gendert werden.
* Die Bluetooth-Reichweite wird durch Wnde, Hindernisse und Bewegungen beeinflusst. Um die optimale Leistung zu erzielen, platzieren Sie das Produkt in Sichtlinie im Raum, so dass Wnde, Mbel etc. nicht stren knnen. Die Akkulaufzeit des Produkts kann aufgrund von Faktoren wie Temperatur, Alter und gespielter Lautstrke variieren. 36 Snelstartgids (Nederlands) Introductie Inhoud van de doos Controleer of de doos de onderstaande onderdelen bevat:
Air LP Air LP luidspreker Air LP stroomadapter Stroomadapter van de Air LP luidspreker Stroomadapter Stofkap USB-kabel RCA-kabel Aux-kabel van 1/8 (3.5 mm) 45 TPM adapter Vilten slipmat Software-cd Snelstartgids Veiligheids-en garantie handleiding
(systeemvereisten, compatibiliteitsinformatie, enz.) en Muziekapparaat
(optioneel) Stroom laatste informatie over dit product Ondersteuning Voor de productregistratie, bezoek ionaudio.com. Aansluitschema Artikelen die niet zijn opgesomd in Inhoud van de doos worden afzonderlijk verkocht. Air LP luidspreker 37 Air LP kenmerken 1. 2. 3. 4. 5. 6. 7. 8. 9. voor toeren houder Draaitafel: leg hierop uw plaat. Houder 45-toerenadapter:
de meegeleverde 45- toerenadapter. Plaats de adapter in de houder wanneer u hem niet gebruikt. Toonarm: de toonarm kan met de hand of met de hendel zakken/opheffen naar omhoog of omlaag worden bewogen. Armsteun: deze speciaal ontworpen armsteun beveiligt de toonarm in rustpositie of wanneer hij niet wordt gebruikt. De armsteun werd ontworpen om in de hoogste positie te blijven wanneer hij ontgrendeld is. Hendel zakken/opheffen: heft de toonarm op en laat hem zakken. Schakelaar 33 / 45 / 78 Toeren: deze schakelaar controleert het toerental van de draaitafel. Opmerking: Gebruik voor optimale resultaten bij het afspelen van 78-toerenplaten een naald voor 78 toeren
(wordt afzonderlijk verkocht). Gebruik alleen een naald voor 78 op ionaudio.com/ict06rs de iCT06rs naald voor 78 toeren. Autostop-schakelaar: deze schakelaar zet autostop aan of uit. Wanneer autostop aan staat, begint de draaitafel te draaien van zodra de toonarm zich boven de plaat bevindt en stopt ze met draaien wanneer de plaat haar einde heeft bereikt. (Wanneer autostop afstaat, blijft de draaitafel altijd draaien, ongeacht de positie van de toonarm.) Opmerking: Als je vinyl stopt voordat het het einde van de muziek bereikt, draai met autostop naar de stand voor dit specifieke record. Dit wordt over het algemeen aanbevolen voor 45-toeren platen. Koptelefooningang: sluit hier een koptelefoon aan
(afzonderlijk verkrijgbaar) om naar uw plaat te luisteren. Bluetooth-knop: druk op deze knop om koppelen via Bluetooth te starten. Als na vijf minuten geen Bluetooth-
luidspreker wordt gevonden om mee te koppelen, dan wordt de Bluetooth-zender inactief en stopt de led met branden. Als er al een verbinding met een Bluetooth-
apparaat bestaat, druk dan op deze knop om de verbinding hiermee te verbreken. 78-toerenplaten. Koop met 2 3 1 4 5 6 7 9 11 10 8 BELANGRIJK: Plaats de meegeleverde vilten slipmat op de draaitafel;
leg vervolgens uw plaat op de vilten slipmat, zodat uw plaat zorgvuldig is geplaatst. BELANGRIJK: Verwijder het plastic kapje van de naald (naaldbescherming) voor de draaitafel aan te zetten.
*WAARSCHUWING: De RCA-uitgangen zijn op LIJNNIVEAU. Verbind deze enkel met ingangen op LIJNNIVEAU. U kunt uw receiver beschadigen indien u een apparaat op LIJNNIVEAU aansluit op een PHONO-ingang. 14 16 12 13 15 10. Bluetooth-led: deze led gaat knipperen tijdens het koppelen met een Bluetooth-apparaat. Wanneer de koppeling is voltooid, blijft de led branden. De led gaat uit wanneer Bluetooth inactief is en de Air LP uit staat. 11. Volume: Dit bijregelen om het uitgangsniveau van koptelefoon en Bluetooth te bedienen. 12. RCA-uitgang*: de audio van een spelende vinylplaat wordt gestuurd naar deze RCA audio-uitgang op lijnniveau. Hij mag niet op apparaten met phononiveau worden aangesloten. Opmerking: Als uw vinylplaat stopt voor het einde van de muziek is bereikt, schakel Autostop dan uit voor deze plaat. Dit wordt aanbevolen voor de meeste 45-toerenplaten. 13. USB-audiouitgang: gebruik de meegeleverde USB-kabel om uw draaitafel op uw computer aan te sluiten. De USB-verbinding verstuurt het audiosignaal van de draaitafel naar uw computer. Zie hoofdstuk Gebruik Air LP met uw Computer van deze handleiding voor informatie. 14. Stroomkabel-ingang: gebruik de meegeleverde stroomadapter om het apparaat aan te sluiten op het stroomnet. 15. Aan/Uit-schakelaar: druk op deze knop om de Air LP aan of uit te zetten. De Air LP draaitafel maakt bij het inschakelen opnieuw verbinding met uw laatst gebruikte Bluetooth-luidspreker, als deze zich binnen het bereik bevindt. 16. Aux-ingang: Sluit op deze stereo aux-ingang van 1/8 een cd-speler, digitale mediaspeler of andere geluidsbron aan. Ook de audio van de Aux-ingang wordt verzonden via een Bluetooth-verbinding. 38 Air LP luidspreker kenmerken 1. Aan Knop, Volumeknop: Druk en loslaten de aan/
volumeknop ingedrukt om de Air LP System aan te zetten. 2. Led van de aan-/uit-/volumeknop: De led van de aan-/uit-/volumeknop gaat rood branden wanneer het apparaat aan staat en zich in koppelingsmodus bevindt. De led gaat blauw branden bij verbinding met een Bluetooth-apparaat. 3. Stroomingang: Sluit hier de meegeleverde stroomadapter van 12V DC, 1,6 A aan om de Air LP Luidspreker van stroom te voorzien. 1 2 3 4 4. Aux-ingang: Sluit een cd-speler, mp3-speler of andere geluidsbron aan op deze stereo 3,5mm (1/8")-ingang. De Air LP luidspreker gebruiken met Air LP Air LP beschikt over een Bluetooth-zender om audio draadloos te versturen naar een Bluetooth-luidspreker. 1. Uw Air LP draaitafel inschakelen. 2. De Bluetooth-knop op Air LP indrukken en loslaten om het koppelingsproces met uw Bluetooth-apparaat op te starten. 3. Druk en loslaten de Air LP luidspreker aan of uit zetten door de aan-/uit-/volumeknop.De led van de aan-/uit-
/volumeknop gaat rood branden wanneer het apparaat aan staat en zich in koppelingsmodus bevindt. 4. Zodra de Air LP draaitafel verbinding heeft gemaakt met de Air LP luidspreker, blijft de Bluetooth-led op de Air LP draaitafel branden. De led-ring op de Air LP luidspreker gaat blauw branden zodra verbinding is gemaakt. Opmerking: Air LP maakt verbinding met de dichtstbijzijnde Bluetooth-luidspreker. Als na vijf minuten geen Bluetooth-luidspreker wordt gevonden om mee te koppelen, dan wordt de Bluetooth-zender inactief en stopt de led met branden. 5. Muziek afspelen op uw Air LP draaitafel. 6. Het volume op de Air LP luidspreker bijregelen door aan de knop te draaien. 7. Om het koppelen ongedaan te maken: druk op de Volumeknop op Air LP Speaker 2 seconden lang in te drukken, of op de Bluetooth-knop op de Air LP draaitafel. De led-ring op de Air LP luidspreker gaat opnieuw rood branden en de Bluetooth-led op de Air LP draaitafel gaat uit. Opmerking: Om verbinding te maken met uw Bluetooth-luidspreker: andere Bluetooth-ontvangers/luidsprekers buiten het bereik van de Air LP plaatsen (10 m of verder) of uitzetten. Air LP koppelen met andere Bluetooth-luidsprekers Air LP beschikt over een Bluetooth-zender om audio draadloos te versturen naar een Bluetooth-luidspreker. 1. Zet uw Bluetooth-luidspreker aan en controleer of deze zich in koppelingsmodus bevindt. 2. De Air LP-draaitafel inschakelen. 3. De Bluetooth-knop op Air LP indrukken en loslaten om het koppelingsproces met uw Bluetooth-luidspreker op te starten. Zodra Air LP verbinding heeft gemaakt met de Bluetooth-luidspreker, blijft de Bluetooth-led branden
(blauw). Ook uw Bluetooth-luidspreker moet de succesvolle koppeling aangeven. Opmerking: Air LP maakt verbinding met de dichtstbijzijnde Bluetooth-luidspreker. Als na vijf minuten geen Bluetooth-luidspreker wordt gevonden om mee te koppelen, dan wordt de Bluetooth-zender inactief en stopt de led met branden. Opmerking: Voor een maximumbereik moeten apparaten met Bluetooth 4.0 of hoger worden gebruikt. 4. Muziek afspelen op uw Air LP draaitafel. Als u verbinding hebt gemaakt met een Bluetooth-luidspreker met een knop afspelen/pauzeren en u hoort geen geluid, druk dan op de knop afspelen/pauzeren. 5. Pas het volume aan op uw Bluetooth-luidspreker (indien van toepassing) of met de volumeknop van de Air LP als 6. Om de koppeling te verbreken: de Air LP draaitafel uitzetten of koppelen via Bluetooth op uw Bluetooth-
u het uitgangsniveau wilt bedienen. luidspreker uitschakelen. Opmerking: Om verbinding te maken met uw Bluetooth-luidspreker: andere Bluetooth-ontvangers/luidsprekers buiten het bereik van de Air LP plaatsen (10 m of verder) of uitzetten. 39 De Air LP luidspreker gebruiken met andere Bluetooth-apparaten 1. Zet uw Bluetooth-apparaat aan (smartphone, tablet, enz.). 2. Druk en loslaten de aan/ volumeknop ingedrukt om de Air LP System aan te zetten. 3. De led-ring van de aan-/uit-/volumeknop gaat rood branden wanneer het apparaat aan staat en zich in 4. Ga naar de Bluetooth-instellingen van uw apparaat, zoek naar Air LP luidspreker en maak verbinding. 5. Zodra uw apparaat verbinding heeft gemaakt met de Air LP luidspreker gaat de Bluetooth led-ring op de Air LP koppelingsmodus bevindt. luidspreker blauw branden. 6. Speel muziek af op uw Bluetooth-apparaat. 7. Het volume op de Air LP luidspreker bijregelen door aan de knop te draaien. 8. Om het koppelen ongedaan te maken: druk op de Volumeknop op Air LP Speaker 2 seconden lang in te drukken. De led-ring gaat opnieuw rood branden. U kunt ook Bluetooth uitschakelen op uw Bluetooth-apparaat of
'Verbinding verbreken' selecteren in het instellingenmenu van uw Bluetooth-apparaat. 9. Om verbinding te maken met een ander Bluetooth-apparaat: herhaal de stappen om te koppelen. Gebruik van Air LP met uw computer Opnemen Voor het opnemen van muziek op uw computer kunt u gebruik maken van de ION EZ Vinyl/Tape Converter en een USB-kabel. EZ Vinyl/Tape Converter slaat uw opnamen op een handige manier op uw computer. Na het omzetten van uw vinylplaten, kunt u ze op cd branden of opladen op draagbare muziekspelers. Om de software te installeren: plaats de meegeleverde cd in uw computer en volg de instructies op het scherm. 1. Wanneer EZ Vinyl/Tape Converter op uw computer is genstalleerd, gebruikt u de meegeleverde USB-kabel om de USB-poort van de Air LP aan te sluiten op een vrije USB-poort op uw computer. 2. Op uw computer kunt de EZ Vinyl/Tape Converter openen door te klikken op Startmenu Alle programma's
(Windows) of op het menu Toepassingen (Mac). 3. Volg de instructies op het scherm voor het instellen van de opname. Wanneer u wordt gevraagd om uw muziek af te spelen, beweegt u de toonarm van de Air LP over de plaat om het afspelen te starten. Opmerking: Om tijdens het afspelen te luisteren naar een plaat: luister via de luidsprekers van uw computer of sluit de RCA-uitgangen van de Air LP aan op een stereo-installatie of actieve luidsprekers. Verbind ze niet met phono-ingangen; de RCA-uitgangen van de Air LP staan ingesteld op lijnniveau en kunnen een apparaat met ingangen op phono-niveau beschadigen. 4. Wanneer u klaar bent met de opname, heft u de toonarm van de Air LP van de plaat en plaatst u hem terug op de armsteun. Surf naar ionaudio.com/computer-optimization voor meer informatie over het optimaliseren van uw computer voor audio. Afspelen U kunt luisteren naar de muziek op uw computer via de interne luidsprekers of een aangesloten hoofdtelefoon. (Air LP kan niet worden gebruikt als een afspeelapparaat voor audio van uw computer.) Om tijdens het afspelen te luisteren naar een plaat: luister via de luidsprekers van uw computer of sluit de RCA-
uitgangen van de Air LP aan op een stereo-installatie of actieve luidsprekers. Verbind ze niet met phono-ingangen;
de RCA-uitgangen van de Air LP staan ingesteld op lijnniveau en kunnen een apparaat met ingangen op phono-
niveau beschadigen. 40 Problemen oplossen Als u problemen ondervindt, raadpleeg dan de onderstaande stappen voor probleemoplossing evenals die in de handleiding van de EZ Vinyl/Tape Converter bij dit product. Als u opneemt op een computer:
o Zorg ervoor dat de Air LP is ingeschakeld en dat de naald op de plaat staat. o Zorg ervoor dat Air LP op uw computer als standaard opname-apparaat staat ingesteld (zie de instructies hieronder). o Als u luistert via de luidsprekers van uw computer, zorg er dan voor dat die luidsprekers op uw computer als standaard afspeelapparaat zijn ingesteld (zie de instructies hieronder). U kunt ook de RCA-uitgangen van de Air LP aansluiten op een stereosysteem of actieve luidsprekers. Verbind ze niet met phono-ingangen; de RCA-
uitgangen van de Air LP staan ingesteld op lijnniveau en kunnen een apparaat met ingangen op phono-niveau beschadigen. (Opmerking: de RCA-uitgangen monitoren het signaal dat uit de draaitafel komt, niet het signaal dat uit uw computer komt.) o U dient ook de USB-kabel die de Air LP met uw computer verbindt eerst te ontkoppelen en daarna weer aan te sluiten. Ik hoor geen geluid wanneer ik muziek afspeel:
Als u muziek afspeelt vanaf vinyl:
o Zorg ervoor dat de Air LP is ingeschakeld en dat de naald op de plaat staat. o Sluit de RCA-uitgangen van de Air LP aan op een stereo-installatie of actieve luidsprekers. (Verbind ze niet met phono-ingangen; de RCA-uitgangen van de Air LP staan ingesteld op lijnniveau en kunnen een apparaat met ingangen op phono-niveau beschadigen.) Als u muziek afspeelt vanaf uw computer:
o Zorg ervoor dat de volumeknop van het programma dat uw muziek afspeelt hoog genoeg staat. o Zorg ervoor dat de volumeknop van uw computer hoog genoeg staat. o Zorg ervoor dat de luidsprekers van uw computer als standaard afspeelapparaat zijn ingesteld (zie de instructies hieronder). (Air LP kan niet worden gebruikt als afspeelapparaat voor het geluid van uw computer.) Ik hoor een bromtoon door mijn speaker of laptop bij gebruik van de draaitafel:
Als u opneemt op een laptop:
o Sluit de laptop aan op een geaard stopcontact (drie draden) Als u de plaat afspeelt door een speaker:
o Sluit aan op een geaard stopcontact (drie draden). Mijn plaat draait niet aan de correcte snelheid; de klank is te hoog of te laag:
o Controleer of de schakelaar 33/45/78 op de correcte snelheid voor uw plaat staat. De Bluetooth-luidspreker die ik wil maakt geen koppeling met Air LP. o Andere Bluetooth-luidsprekers in de buurt uitschakelen of verplaatsen (verder dan 10 m), zodat alleen de dichtstbijzijnde Bluetooth-luidspreker van uw keuze begint te koppelen. o Druk de Bluetooth-knop van de Air LP in en laat deze vervolgens weer los om de koppeling met een Bluetooth-
luidspreker te verbreken. Druk de knop nogmaals in om opnieuw te proberen koppelen. o Air LP eerst uit- en dan weer aanzetten en vervolgens de Bluetooth-knop indrukken om opnieuw te proberen koppelen. o Gebruik de volumeknop op de Air LP om het uitgangsniveau van Bluetooth te verhogen. Ik ben verbonden met een Bluetooth-luidspreker, maar hoor geen geluid. o Als u verbinding hebt gemaakt met een Bluetooth-luidspreker met een knop afspelen/pauzeren en u hoort geen geluid, druk dan op de knop afspelen/pauzeren. Mijn smartphone maakt geen verbinding met de Air LP draaitafel. o De Air LP-draaitafel doet dienst als een Bluetooth-zender die het geluid van Air LP naar andere Bluetooth-
luidsprekers verzendt. De Air LP kan geen dienst doen als Bluetooth-ontvanger, noch muziek afspelen van uw smartphone via de koptelefoon- of RCA-uitgang. De Bluetooth-led stopt niet met knipperen. Ik hoor statische ruis in mijn koptelefoon. o Zodra de Bluetooth-knop is ingedrukt, probeert Air LP gedurende 5 minuten verbinding te maken met de dichtstbijzijnde Bluetooth-luidsprekers. Om de knipperende Bluetooth-led stop te zetten, moet u de Air LP aan en uit zetten. o Druk de Bluetooth-knop van de Air LP in om de koppeling met een Bluetooth-luidspreker te verbreken. Let erop wanneer u met uw koptelefoon luistert naar Air LP dat Air LP niet tegelijkertijd verbonden is met een Bluetooth-
luidspreker. 41 Air LP Instellen als standaard opnameapparaat Windows XP: Klik op Start Bedieningspaneel (of Instellingen Bedieningspaneel in Klassieke weergave) Geluid en audio-apparaten. Klik op het tabblad Geluid en selecteer onder Geluid opnemen de USB PnP Audioapparaat als standaardapparaat. Windows Vista: Klik op Start Bedieningspaneel (of Instellingen Bedieningspaneel in Klassieke weergave) Hardware en geluid Geluid. Klik op het tabblad Opnemen en selecteer de USB PnP Audioapparaat als standaardapparaat. Windows 7: Klik op Start Bedieningspaneel Geluid. Klik op het tabblad Opnemen en selecteer de USB PnP Audioapparaat als standaardapparaat. Windows 8: Klik in het Startmenu op de hoek links onderaan het scherm om het bureaublad te openen. Zoek in de hoek onderaan rechts van de Taakbalk het pictogram met de luidspreker voor de volumeregeling. Klik met de rechtermuisknop op de luidspreker en selecteer Afspeelapparaten. Selecteer het tabblad Opnemen in het configuratiescherm Geluid. Als naast de USB PnP Audioapparaat geen groen 'vinkje' staat, klik er dan op met de rechtermuisknop en selecteer Als standaardapparaat instellen. Mac: Klik op het Apple-pictogram in de linkerbovenhoek en klik op Systeemvoorkeuren Geluid. Klik op het tabblad Invoer. Selecteer in het menu de USB PnP Audioapparaat ir als het apparaat. De geluidskaart van uw computer instellen als standaard afspeelapparaat Windows XP: Klik op Start Bedieningspaneel (of Instellingen Bedieningspaneel in Klassieke weergave) Geluid en audio-apparaten. Klik op het tabblad Geluid en selecteer onder Geluid afspelen de geluidskaart van uw computer als standaardapparaat. Windows Vista: Klik op Start Bedieningspaneel (of Instellingen Bedieningspaneel in Klassieke weergave) Hardware en geluid Geluid. Klik op het tabblad Afspelen en selecteer de geluidskaart van uw computer als standaardapparaat. Windows 7: Klik op Start Bedieningspaneel Geluid. Klik op het tabblad Afspelen en selecteer de geluidskaart van uw computer als standaardapparaat. Windows 8: Klik in het Startmenu op de hoek links onderaan het scherm om het bureaublad te openen. Zoek in de hoek onderaan rechts van de Taakbalk het pictogram met de luidspreker voor de volumeregeling. Klik met de rechtermuisknop op de luidspreker en selecteer Afspeelapparaten. In het tabblad Afspelen moet het configuratiescherm Geluid verschijnen. Als naast de geluidskaart van uw computer geen groen 'vinkje' staat, klik er dan op met de rechtermuisknop en selecteer Als standaardapparaat instellen. Mac: Klik op het Apple-pictogram in de linkerbovenhoek en klik op Systeemvoorkeuren Geluid. Klik op het tabblad Uitvoer. Selecteer Interne luidsprekers in het menu als u gebruik maakt van de interne luidsprekers van uw computer of selecteer Hoofdtelefoon als u luidsprekers of een hoofdtelefoon gebruikt die zijn aangesloten op de 1/8-
koptelefoonuitgang van de computer. Neem contact op met ION Audio of uw dealer voor technische ondersteuning VOORALEER DIT PRODUCT TERUG TE ZENDEN. De contactgegevens zijn te vinden in het boekje met veiligheidsinstructies bij dit product. ionaudio.com/support 42 Technische specificaties Afmetingen Air LP draaitafel
(Lengte x Breedte x Diepte) 406 mm x 356 mm x 114 mm 16" x 14" x 4.5"
Gewicht Air LP draaitafel 3 kg Voeding Air LP draaitafel 12V DC, 0,2A, middelste pin positief, tip negatief Bluetooth-versie Air LP draaitafel Afmetingen Air LP luidspreker (Lengte x Breedte x Diepte) BT 3.0 72 mm x 417 mm x 68 mm 2,8 x 16,4 x 2,7 Voeding Air LP luidspreker 9V DC, 2A Vermogen Air LP luidspreker Air LP luidsprekerdrivers De Bluetooth-functie van de Air LP draaitafel Bluetooth-functie Air LP luidspreker Bluetooth-versie Air LP luidspreker Bluetooth-bereik Type cartridge Cartridge en stylus 20 W (piek)
(2) drivers van 2" met volledig frequentiebereik Bluetooth-zender Bluetooth-ontvanger BT 3.0 Tot 9,1 m*, 30 Keramisch Cartridge en stylus De CZ-800-10 (saffieren naald) is meegeleverd en tevens verkrijgbaar op ionaudio.com/products/details/CZ-800-10. Een stylus voor 78 toeren, de iCT06rs, is verkrijgbaar op ionaudio.com/ict06rs. De specificaties kunnen zonder voorafgaande kennisgeving worden gewijzigd.
* Het Bluetooth-bereik wordt benvloed door muren, obstakels en beweging. Plaats het product voor optimale prestaties in uw kamer binnen uw gezichtsveld, zodat het niet wordt belemmerd door muren, meubels, enz. De levensduur van de batterij kan variren naargelang de temperatuur, ouderdom en het gebruiksvolume van het product. 43 ionaudio.com Manual Version 1.1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warnings:
This device complies with Industry Canadas licence-exempt RSSs Operation is subject to the following two conditions:
(1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-10-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-10-17
|
||||
1 | Applicant's complete, legal business name |
ION Audio, LLC
|
||||
1 | FCC Registration Number (FRN) |
0024611568
|
||||
1 | Physical Address |
200 Scenic View Drive, Cumberland
|
||||
1 |
CUMBERLAND, Rhode Island 02864
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB3E
|
||||
1 | Equipment Product Code |
IT55F
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** L********
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
j******@ionaudio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Air LP | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Alpha Product Testing Co., Ltd.
|
||||
1 | Name |
M**** Z********
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
m******@a-lab.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0008200 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC