all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 874.44 KiB | March 17 2020 | |||
1 2 |
|
Internal photos | Internal Photos | 832.70 KiB | March 17 2020 | |||
1 2 |
|
External photos | External Photos | 422.55 KiB | March 17 2020 | |||
1 2 |
|
ID label and location | ID Label/Location Info | 540.87 KiB | March 17 2020 | |||
1 2 | Block Diagram | Block Diagram | March 17 2020 | confidential | ||||
1 2 |
|
Confidentiality | Cover Letter(s) | 79.50 KiB | March 17 2020 | |||
1 2 |
|
Family declaration | Attestation Statements | 111.99 KiB | March 17 2020 | |||
1 2 |
|
Letter Authorization | Cover Letter(s) | 80.90 KiB | March 17 2020 | |||
1 2 | Operational Description | Operational Description | March 17 2020 | confidential | ||||
1 2 |
|
RF Exposure | RF Exposure Info | 160.55 KiB | March 17 2020 | |||
1 2 | Schematics | Schematics | March 17 2020 | confidential | ||||
1 2 |
|
Test reports | Test Report | 4.06 MiB | March 17 2020 | |||
1 2 |
|
Test setup photos | Test Setup Photos | 280.14 KiB | March 17 2020 |
1 2 | User manual | Users Manual | 874.44 KiB | March 17 2020 |
9 2 1 8 5 2 1 10 11 76 3 4 Remote Control Creation mode. Screwdriver for Remote Control Quickstart Guide/Safety & Warranty Information button to disconnect a paired Bluetooth device. and the battery is fully charged, the red LED will turn off. Note: A voice prompt will be heard when the unit needs to be charged. enable or disable voice prompts. Note: Party Boat will power off after 1 hour if there is no audio playing. Party Boat Quickstart Guide Box Contents Party Boat Power Adapter
(2) AAA Batteries Features IMPORTANT: This equipment is not suitable for use in locations where children are likely to be present. Note: Use the included remote control to turn on the boat motors, change the direction of the boat, FM radio controls, playback/pause, track selection, volume, and to power off the unit. 1. Volume Up (+) / Down (-): Press these buttons to change the volume of the speaker. 2. Previous (<) / Next (>) Track/Tune: Press and release these buttons to go to the previous or next FM radio station. Press and hold these buttons to seek backwards or forward for a clear FM radio station. Press and release these buttons to skip to the previous or next Bluetooth track. 3. FM Mode: Press this button to enter FM mode. Hold the button for 3 seconds to enter Preset 4. Bluetooth Button: Press this button briefly to begin Bluetooth connecting. Press and hold this 5. Bluetooth/FM Indicator: This LED blinks blue when Bluetooth pairing or illuminates solid blue when connected to a Bluetooth device. When in FM mode, this LED is solid green and blinks slowly when in FM Preset Creation mode. 6. Power On/Off: Press and hold this button to turn Party Boat on/off. Press this button twice to 7. Charging Indicator: The LED is solid red when the battery is charging. When the power is on 8. Play/Pause: Press to play or pause a track from a connected Bluetooth device. Press and 9. Power Adapter Input*: Insert the included power adapter here to charge Party Boat. Make sure 10. USB Charge Port*: Connect your smartphone's charge cable here to charge it. In order to 11. Aux Input*: This stereo 1/8 (3.5 mm) input can be used to connect a CD player, MP3 player, or
*IMPORTANT: Cover the Aux In, USB Charging Port, and Power Adapter Input with the cap in the locked position when using Party Boat in water. Make sure Party Boat and its connections are dry before charging. Never charge when wet. Driving Party Boat Using the Remote CAUTION: Always keep hands, fingers, hair, tools, and any loose or hanging objects away from rotating parts. Note: To ensure Party Boat does not travel out of range of the remote (75 ft. / 22.9 m), the Party Boat motors will stop after 10 seconds of traveling in a single direction. Press the directional button again if you would like the motors to continue. Press and release a directional button on the remote control to move Party Boat in that direction. To move in a new direction, press and release a different directional button. To make a right or left turn when driving straight, press the Right or Left directional buttons. As Party Boat turns, press the Up directional button when the boat is facing 90 degrees to stop turning and continue in the new direction. To stop Party Boat from moving, press and release the same directional button again. Adjusting the Motor Speed:
1. Press and hold the Play/Pause button and the Up button on the remote control for 2 seconds to enter Motor Speed Adjustment mode. Party Boat will then move forward and continuously play a tone. 2. Press and release the Left or Right directional button to adjust the speed of the left or right 3. Press and release the Up button to increase the speed of the motor at increments of 5% each time it is pressed. Press and release the Down button to increase the speed of the motor at increments of 5% each time it is pressed. 4. Press and hold the Play/Pause button and the Up button again to save the speed and exit. Note: If a button is not pressed within 10 seconds, it will automatically save and exit the Motor Speed Adjustment mode. The default motor speed is 100% when first starting up. The unit will remember the speed when powering off. Party Boat and its connections are dry before charging. Never charge when wet. release this button to select a previously saved preset station. charge a device, Party Boat needs to be powered on. other audio source. motor. App Control IMPORTANT: To ensure the best possible experience with the ION Sound XP app, use the most current Android OS or iOS on your device. Note: Ensure that your device has internet access via your service provider or wireless connection. You can also download the app on your computer, but remember to connect and sync your device to transfer the app. Follow these steps to download the free app on your device:
1. Open the Apple App Store or Google Play on your device. 2. Search for the ION Sound XP app. 3. Follow the on-screen instructions to download and install the app. 4. Once downloaded, the ION Sound XP app will appear on your device's home screen. Support IMPORTANT: For the full User Guide, visit ionaudio.com. For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support. Solar Charging To use the solar panel to charge Party Boat, place the loudspeaker in direct sunlight for at least 3 hours for best results. The rate of charging depends on the amount of sunlight the solar panel receives. The unit will charge slower when receiving indirect sunlight. Using the Radio Selecting a Radio Station:
1. Press the FM button. 2. Select a radio station using the </> buttons. Saving a Preset:
1. Press and release the </> buttons to select a FM radio station that you want to save as a preset. 2. Press and hold the FM button for 3 seconds to enter Preset Creation mode. 3. Press and release the </> buttons to select a preset location. Once the desired save location is reached, press and release the FM button to save the station preset. The FM LED will quickly flash green to confirm a preset is saved and then return to FM radio mode. Selecting a Preset:
To select from the 6 Preset stations, press and release the Play/Pause button in FM radio mode. The tuner will jump to the next preset location and say the name of the preset location (for example, three), and resume playing the FM station audio. Note: When audio tones are playing, the FM signal will be temporarily muted. Pairing or Disconnecting a Bluetooth Device 1. Turn on your Bluetooth device. 2. Power on Party Boat. 3. Press and release the Bluetooth button to enter pairing mode. You will know you are in pairing mode when the Bluetooth LED is slowly flashing. 4. Navigate to your Bluetooth devices setup screen, find Party Boat and connect. Do not attempt to connect to Party Boat BLE. The voice prompt Bluetooth pairing will be heard when connected. Note: If your Bluetooth device prompts for a pairing code, enter 0000. 5. Press and hold the Bluetooth button to disconnect a paired Bluetooth device. Note: Maximum range will be achieved when using devices with Bluetooth 5.0. Linking Two Speakers 1. Power on both Party Boat speakers. You will hear "Ready to pair."
Note: In order to use Stereo-Link mode, you cannot have a Bluetooth device connected. If one speaker is connected to a Bluetooth device, break the connection by pressing and holding the Bluetooth button. 2. With no Bluetooth device connected (blue LEDs on both speakers will blink), on one Party Boat double press the Bluetooth button; repeat this for the second Party Boat. The melody will indicate the Party Boats are searching for each other to link as their blue LEDs begin to blink fast. 3. Wait about 10-30 seconds for the Party Boats to find each other. Once linked, one Party Boat will say Paired (if the voice prompts are enabled). Now that the two speakers are linked, one speakers blue LED will be lit solid, while the other speakers blue LED will blink slowly to indicate its ready to pair the stereo-linked speakers to your Bluetooth device (e.g., your phone). 4. When the Party Boats are wirelessly linked to play in stereo, navigate to your Bluetooth devices setup screen, find Party Boat and connect. 5. Once your smartphone is paired, you will hear Paired (if the voice prompts are enabled) and audio can now play out of both speakers in stereo. To exit Stereo-Link mode, double press the Bluetooth button until the speaker goes back In Stereo-Link mode: UI Controls on both speakers will be active. into pairing mode, saying Bluetooth disconnected. In Stereo-Link mode, press Power to turn off both speakers. Notes: If a Party Boat is in Stereo-Link mode when you power it off, it will be in Stereo-Link mode the next time you power it on. That means if two Party Boats are linked when you power them off, they will automatically link when you power them on as long as they are in close range of each other and powered on within 30 seconds of each other. If a Party Boat is in Stereo-Link mode when you power it off, when you power it back on, it will revert back to single mode, and be ready to pair to a Bluetooth device if it does not find another Party Boat to link to within 15 minutes. To re-enter Stereo-Link mode, follow Steps 15 above. Technical Specifications Output Power: 30 W (peak) Frequency Response: 60 Hz 20 kHz Driver: 3.5 / 88.9 mm Bluetooth:
Module: Bluetooth 5.0 Range: Up to 33 ft. (10 m) *
Linked Stereo Range: Up to 30 ft. (9 m) between two speakers.
* Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. Trademarks & Licenses Water Resistance Class: IPX7 Battery: Lithium Ion; 7.4V / 2200 mAh Battery Life: Up to 20 hours Recharge Time: 4 hours Aux Input: 3.5 mm (1/8) line-level USB Charging Port: +5V, 1A DC Power Input: 9V, 2A Dimensions (WxDxH): 11.75 x 14.5 x 4.5 299 x 368 x 114 mm Weight: 5.0 lbs. / 2.3 kg ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners. Manual Version 1.1 Gua de inicio rpido Party Boat Contenido de la caja Party Boat Control remoto Adaptador de alimentacin Destornillador para control remoto Gua de Seguridad y garantia inicio rpido / Manual sobre la 3 4 5 76 8 9 10 11
(2) Pilas AAA Caractersticas 1 1 2 2 IMPORTANTE: Este equipo no es adecuado para su uso en lugares donde es probable que haya nios presentes. Nota: Utilice el control remoto para encender los motores del bote, cambiar su rumbo, utilizar los controles de la radio FM, reproducir/pausar, seleccionar pista, cambiar el volumen y apagar la unidad. 1. Subir (-) / bajar (+) volume: presione para cambiar el volumen del altavoz. 2. Pista / meloda anterior (<) / siguiente (>): presione y suelte estos botones para ir a la estacin de radio FM anterior o siguiente. Mantenga presionados estos botones para buscar hacia atrs o hacia adelante una estacin de radio FM clara. Presione y suelte estos botones para saltar a la pista Bluetooth anterior o siguiente. 3. Modo FM: Pulse este botn para entrar al modo de FM. Mantenga pulsado el botn durante 3 segundos para entrar al modo de creacin de presets. 4. Botn Bluetooth: Pulse este botn brevemente para comenzar la conexin Bluetooth. Mantenga pulsado este botn para desconectar un dispositivo Bluetooth apareado. 5. Indicator Bluetooth/FM: El LED parpadea durante el apareamiento de Bluetooth o se ilumina con luz azul fija cuando est conectado a un dispositivo Bluetooth. En el modo FM, este LED permanece iluminado con luz verde y parpadea lentamente cuando se encuentra en modo de creacin de presets de FM. 6. Encendido/apagado: Mantenga pulsado este botn para encender o apagar el Party Boat. Presione este botn dos veces para habilitar o deshabilitar las indicaciones de voz. Nota: El Party Boat se apagar tras 1 hora si no se reproduce audio. 7. Indicador de carga: El LED se iluminar con luz roja permanente cuando la batera se est cargando. Cuando est encendido y la batera est totalmente cargada, este LED rojo se apagar. Nota: Se escuchar un mensaje de voz cuando la unidad necesite ser cargada. 8. Reproducir/Pausa: Plselo para reproducir o hacer pausa en una pista de un dispositivo Bluetooth conectado. Pulse y suelte este botn para seleccionar un preset de estacin guardado previamente. 9. Entrada del adaptador de alimentacin*: Inserte aqu el adaptador de alimentacin incluido para cargar el Party Boat. Asegrese de que el Party Boat y sus conexiones estn secas antes de cargarlo. Nunca lo cargue si est hmedo. 10. Puerto de carga USB*: Conecte aqu el cable de carga de su telfono inteligente (smartphone) para cargarlo. Para cargar un dispositivo, el Party Boat debe estar encendido. 11. Entrada auxiliar*: Esta entrada estreo de 3,5 mm (1/8 pulg.) se puede utilizar para conectar un reproductor de CD, un reproductor de MP3 u otra fuente de audio.
*IMPORTANTE: Cubra la entrada auxiliar, el puerto de carga USB, y el adaptador de alimentacin con la tapa en la posicin cerrada antes de utilizar el Party Boat en el agua. Asegrese de que el Party Boat y sus conexiones estn secas antes de cargarlo. Nunca lo cargue si est hmedo. Cmo controlar el Party Boat con el control remoto PRECAUCIN: Mantenga siempre las manos, dedos, cabello, herramientas y cualquier objeto suelto o colgado alejado de las piezas giratorias. Nota: Para garantizar que el Party Boat no ir ms all del alcance del control remoto (75 pies /
22,9 m), los motores del Party Boat se detendrn tras 10 segundos de desplazamiento en la misma direccin. Pulse el botn direccional nuevamente si desea que los motores continen. Pulse y suelte uno de los botones direccionales del control remoto para mover el Party Boat en esa direccin. Para moverlo en una nueva direccin, pulse y suelte un botn direccional diferente. Para realizar un giro a la derecha o a la izquierda cuando se est desplazando en lnea recta, pulse el botn direccional Right o Left. A medida que el Party Boat gira, pulse el botn direccional Up cuando est orientado a 90 grados para detener el giro y continuar en la nueva direccin. Para hacer que el Party Boat deje de moverse, pulse y suelte el mismo botn direccional nuevamente. Ajuste de la velocidad del motor:
1. Mantenga presionado el botn Play/Pause y el botn Up del control remoto durante 2 segundos para ingresar al modo de ajuste de velocidad del motor. Party Boat se mover hacia adelante y reproducir continuamente un tono. 2. Presione y suelte el botn de direccin Left o Right para ajustar la velocidad del motor izquierdo o derecho. 3. Presione y suelte el botn Up para aumentar la velocidad del motor en incrementos de 5% cada vez que se presiona. Presione y suelte el botn Down para aumentar la velocidad del motor en incrementos de 5% cada vez que se presiona. 4. Mantenga presionado el botn Play/Pause y el botn Up nuevamente para guardar la velocidad y salir. Nota: Si no se presiona un botn en 10 segundos, guardar y saldr automticamente del modo de ajuste de velocidad del motor. La velocidad predeterminada del motor es del 100% cuando se inicia por primera vez. La unidad recordar la velocidad cuando se apague. Carga solar Suporte IMPORTANTE: para ver la Gua del usuario completa, visite ionaudio.com.
(documentacin, Para obtener especificaciones tcnicas, requisitos de sistema, informacin de compatibilidad, etc.) y registrarlo, visite ionaudio.com. reciente acerca de este producto informacin ms la Para obtener soporte adicional del producto, visite ionaudio.com/support. Contrle d'application IMPORTANTE: Afin de profiter de la meilleure exprience possible avec lapplication, assurez-vous davoir la toute dernire version de Android OS ou de iOS sur votre appareil. Remarque: Veuillez vous assurer que votre appareil dispose dune connexion Internet. Vous pouvez galement tlcharger lapplication gratuite sur votre ordinateur, mais noubliez pas de connecter et de synchroniser votre appareil afin de transfrer lapplication. Veuillez suivre les tapes ci-dessous afin de tlcharger lapplication sur votre appareil:
1. Accdez au Apple App Store ou Google Play partir de votre appareil. 2. Recherchez lapplication ION Sound XP. 3. Suivez ensuite les consignes l'cran afin de la tlcharger et de l'installer. 4. Une fois tlcharge, lapplication ION Sound XP saffiche sur la fentre daccueil de votre appareil. Usando la Radio Seleccin de una estacin de radio:
1. Pulse el botn FM. 2. Seleccione una estacin de radio utilizando los botones </>. Guardado de un preset:
un preset. presets. 1. Pulse y suelte los botones </> para seleccionar una estacin de FM que desee guardar como 2. Mantenga pulsado el botn FM durante 3 segundos para activar el modo de creacin de 3. Pulse y suelte los botones </> para seleccionar una ubicacin predeterminada. Una vez alcanzada la ubicacin de memorizacin deseada, pulse y suelte el botn FM para guardar el preset de la estacin. El LED FM parpadear rpidamente en verde para confirmar que se ha guardado un preset y volver a modo de radio de FM. Seleccin de presets:
Para seleccionar entre las 6 estaciones preestablecidas, pulse y suelte botn Play/Pause en modo de radio de FM. El sintonizador saltar a la siguiente ubicacin de preset, dir el nombre de la ubicacin del preset (por ejemplo, "tres") y reanudar la reproduccin del audio de la estacin de FM. Nota: Cuando se estn reproduciendo los tonos de audio, la seal de FM se silencia temporalmente. Emparejar o desconectar un dispositivo Bluetooth 1. Encienda su dispositivo Bluetooth. 2. Encienda el Party Boat. 3. Presione y suelte el botn de Bluetooth para vincular a un dispositivo Bluetooth. Sabr que est en modo de emparejamiento cuando el LED de Bluetooth parpadee lentamente. 4. Navegue a la pantalla de configuracin de su dispositivo Bluetooth, busque Party Boat y conctelo a l. No intente conectarse a Party Boat BLE. El mensaje de voz "Bluetooth pairing"
se escuchar cuando est conectado. Nota: Si su dispositivo Bluetooth solicita un cdigo de apareamiento, ingrese 0000. 5. Mantenga pulsado el botn Bluetooth para desconectar un dispositivo Bluetooth emparejado. Nota: El alcance mximo se logra cuando se utilizan dispositivos con Bluetooth 5.0 o superior. Enlace estreo entre dos altavoces 1. Encienda ambos altavoces Party Boat. Escuchar "Ready to pair."
Nota: Para poder usar el modo Stereo-Link, no podr tener un dispositivo Bluetooth conectado. Si hay un altavoz conectado a un dispositivo Bluetooth, interrumpa la conexin manteniendo pulsado el botn Bluetooth. 2. Si no hay ningn dispositivo Bluetooth conectado (los LED azules en ambos altavoces parpadearn), pulse dos veces el botn Bluetooth en uno de los Party Boat; repita este procedimiento para el segundo Party Boat. La meloda indicar que los Party Boat se estn buscando el uno al otro para enlazarse a la vez que sus LED azules comienzan a parpadear rpidamente. 3. Espere de 10 a 30 segundos hasta que los Party Boat se encuentren. Una vez enlazados, uno de los Party Boat dir Paired (si los avisos de voz estn activados). Ahora que ambos altavoces estn "enlazados", el LED azul de un altavoz se iluminar, mientras que el LED azul del otro altavoz parpadear lentamente para indicar que est listo para aparear los altavoces estreo enlazados a su dispositivo Bluetooth (por ej., su telfono). 4. Cuando los Party Boat estn enlazados de forma inalmbrica para reproducir en estreo, navegue a la pantalla de configuracin Bluetooth de su dispositivo, busque Party Boat y establezca la conexin. 5. Una vez apareado su telfono inteligente (smartphone), escuchar Paired (si los avisos de voz estn activados) y podr reproducir audio a travs de ambos altavoces en estreo. En modo Stereo-Link: Los controles de la interfaz del usuario en ambos altavoces estarn activados. Para salir del modo Stereo-Link, pulse dos veces el botn Bluetooth hasta que el altavoz regrese al modo de apareamiento diciendo Bluetooth disconnected. Estando en el modo Stereo-Link, pulse Power (Encendido) para apagar ambos altavoces. Notas: Si un Party Boat se encuentra en modo Stereo-Link cuando lo apaga, estar en modo Stereo-Link la prxima vez que lo encienda. Eso implica que si dos Stereo-Link estn enlazados cuando los apaga, se enlazarn automticamente cuando los encienda siempre que estn dentro del alcance del otro y se enciendan con menos de 30 segundos de diferencia entre s. Para utilizar el panel solar para cargar el Party Boat, coloque el altavoz bajo luz solar directa durante al menos 3 horas para obtener mejores resultados. La velocidad de carga depende de la cantidad de luz que recibe el panel solar. La unidad se carga ms lentamente si recibe luz solar indirecta. Si un Party Boat se encuentra en modo Stereo-Link cuando lo apaga, al encenderlo nuevamente regresar al modo mono/individual, y estar listo para aparearse con un dispositivo Bluetooth si no encuentra otro Party Boat con el cual enlazarse en un perodo de 15 minutos. Para volver a entrar al modo Stereo-Link, repita los pasos 1 a 5 anteriores. Manual Version 1.1 14. Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product. durante perodos prolongados. 15. Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to Safety & Warranty Information English For complete warranty information: ionaudio.com/warranty Important Safety Instructions 1. Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions. 2. Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 3. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 4. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus
(if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 5. Unplug this apparatus during lightning storms. 6. Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. 7. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
(This applies only if your product uses a battery.) 8. Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection. 9. For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double-
insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 10. Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with Class II Wiring requires Class II wiring installed by an instructed person or the use of ready-made leads or cords. 11. This apparatus is for professional use only. Intended operational climate: moderate. 12. (If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer. 13. Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss. constitute a risk of electric shock. Safety Notices This equipment is not suitable for use in locations where children are likely to be present. This is not a toy and is not intended for use by children. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments. NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; (f) consult the dealer or an experienced radio/television technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If apparatus contains a coin/button-cell battery: Warning: Do not ingest the batterychemical burn hazard. The remote control supplied with this product contains a coin/button-cell battery. If the coin/button-cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. For Canadian Models: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Pour les modles Canadiens : L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada (ISDE) applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc. Disposal of Batteries (if applicable):
Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode. Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal.
(Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.) Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely dead. Grouping them together can bring these live batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government. Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.) Manual Version 1.1 Informacin de seguridad y garanta Espaol Para informacin completa sobre la garanta: ionaudio.com/warranty Instrucciones importantes de seguridad 1. Lea estas instrucciones. Conserve estas instrucciones. Preste atencin a las advertencias. Siga todas las instrucciones. 2. No anule la funcin de seguridad del enchufe tipo polarizado o con conexin a tierra (si es aplicable). Un enchufe polarizado tiene dos patillas, una ms ancha que la otra. Un enchufe de tipo de conexin a tierra tiene dos patillas y una clavija de puesta a tierra. La patilla ancha o la tercera clavija son para su seguridad. Si el enchufe provisto no entra en su tomacorriente, consulte a un electricista y solictele el reemplazo del tomacorriente obsolete. 3. Proteja el cable de alimentacin de modo que no lo pisen ni quede estrangulado, particularmente en los enchufes, tomacorrientes y el punto donde sale del equipo. 4. Use slo el carrito, soporte, trpode, mnsula o mesa especificados por el fabricante o vendidos con el equipo (si es aplicable). Si usa un carrito, tenga cuidado al mover la combinacin de carrito/equipo para evitar que se vuelque y produzca lesiones. 5. Desenchufe este equipo durante las tormentas elctricas. 6. Suministro elctrico (si es aplicable): Conecte este producto solamente a un suministro elctrico del tipo que se describe en estas instrucciones de operacin o segn se indique en la unidad. 7. Precaucin (si es aplicable): Peligro de la explosin si la batera se substituye incorrectamente. Substituir solamente por el mismo o el tipo equivalente. Las bateras (un bloque de bateras o una batera instalada) no se deben exponer a calor excesivo, tal como la luz solar, el fuego, etc. 8. Terminal de conexin a tierra de proteccin (si es aplicable): El artefacto debe conectarse a un tomacorriente del suministro elctrico con una conexin a tierra de proteccin 9. Solamente para aparatos de Clase II (si aplica): Este smbolo significa que el equipo es un artefacto elctrico Clase II o de doble aislamiento. Est diseado de manera tal que no requiere una conexin de seguridad a la tierra elctrica. 10. Cableado de Clase II (si aplica): Para reducir el riesgo de choque elctrico, el cableado externo conectado a los terminales marcados como Cableado de Clase II requiere la instalacin de un cableado de Clase II por una persona capacitada o el uso de conductores o cables prearmados. 11. Este aparato es para uso profesional nicamente. Climas de funcionamiento previstos: moderado. 12. (Si es aplicable) Cuando traslade o no use el artefacto, sujete el cable de alimentacin (por ejemplo, envulvalo con un precinto). Tenga cuidado de no daar el cable de alimentacin. Antes de usarlo nuevamente, asegrese de que el cable de alimentacin no est daado. Si dicho cable presenta algn dao, lleve la unidad y el cable a un tcnico de servicio calificado para reparacin o reemplazo segn lo especifique el fabricante. 13. Advertencia (si aplica): Para evitar daos potenciales al odo, no escuche a niveles elevados de volumen 14. Advertencia (si aplica): Antes de instalar u operar el producto, consulte toda la informacin importante (como la relativa a electricidad, seguridad, etc.) impresa en la envuelta inferior exterior o el panel trasero. 15. Advertencia (si aplica): Los terminales marcados con el smbolo de relmpago pueden ser de suficiente magnitud como para presentar un riesgo de choque elctrico. Seales de advertencia Este equipo no es adecuado para su uso en lugares donde es probable que haya nios presentes. Esto no es un juguete y no est destinado a ser utilizado por nios. PRECAUCIN: PARA REDUCIR EL RIESGO DE DESCARGA ELCTRICA NO QUITE NINGUN TAPADERO. DENTRO DE LA UNIDAD NO HAY COMPONENTES TILES PARA EL UTILIZADOR. PARA EL SERVICIO SE DEBE DIRIGIRSE SOLAMENTE AL PERSONAL DE SERVICIO CUALIFICADO. VOLTAJE PELIGROSO NO AISLADO: La sea de relmpago con la punta de la flecha dentro del tringulo equiltero est puesto para alertar al utilizador de la presencia del voltaje peligroso no aislado dentro del recinto de producto que puede tener la magnitud suficiente de correr un riesgo de descarga elctrica. INSTRUCCIONES: El signo de exclamacin, dentro del tringulo equiltero, es para alertar el utilizador de la presencia de las instrucciones importantes de funcionamiento y de mantenimiento (servicio) en la literatura que acompaa este dispositivo. ADVERTENCIA: Para reducir el riesgo de incendio o descarga elctrica, no exponga este aparato a la lluvia o a la humedad. Los equipos elctricos NUNCA deberan guardarse o almacenarse en ambientes hmedos. AVISO SOBRE LAS REGULACIONES DEL FCC (Federal Communications Commission): Este equipo genera y usa energa de radiofrecuencia y puede causar interferencia en la recepcin de radio y de televisin si no la opera estrictamente segn los procedimientos detallados en este manual de operacin. Esta unidad cumple con las reglas de aparatos informticos de Clase B en conformidad con las especificaciones en la Subparte J o Parte 15 de las Reglas FCC, que estn diseadas para proporcionar una proteccin razonable contra tal interferencia en una instalacin residencial. Sin embargo, no existen garantas de que no ocurrir una interferencia en una instalacin especfica. Si la unidad causa interferencia en alguna recepcin de radio o de televisin, intente reducirla realizando uno o ms de los siguientes mtodos: (a) reposicione la otra unidad y/o su antena ; (b) mueva esta unidad ; (c) deje ms espacio entre esta unidad y la(s) otra(s) unidad(es); (d) enchufe esta unidad a una toma de corriente alterna diferente para que est en un circuito diferente al de los dems equipos ; (e) asegrese que todos los cables estn blindados correctamente, usando un inductor o ferrite cuando sea adecuado. Esta nota est en conformidad con la Seccin 15.838 de las Reglas de FCC. Si el aparato contiene una pila de tipo botn: Advertencia: No ingiera la baterapeligro de quemadura qumica. El control remoto que se suministra con este producto contiene una pila de tipo botn. Si la misma se ingiere, puede causar quemaduras internas severas en tan solo 2 horas y puede causar la muerte. Mantenga las pilas nuevas y usadas alejadas de los nios. Si el compartimiento de las pilas no se cierra de forma segura, suspenda el uso del producto y mantngalo alejado de los nios Si cree que las pilas pueden haber sido ingeridas o introducidas en alguna parte del cuerpo, busque atencin mdica inmediata. Disposicin final de pilas (si aplica):
Nunca deseche pilas de ningn tipo en el fuego o cerca de fuentes de calor excesivo o luz solar directa. Las pilas sobrecalentadas pueden romperse o explotar. Si no est seguro de cmo o dnde desechar una pila, consulte la ubicacin, mtodo, etc. apropiados en sus reglamentos locales. Pilas alcalinas y bateras de celda de litio tipo botn: Puede desechar las pilas alcalinas y las pilas de celda de litio tipo botn junto con los desechos normales del hogar. No presentan un riesgo a la salud o al medioambiente durante el uso o disposicin final normal. (Las pilas alcalinas estn compuestas principalmente de metales comunes tales como acero, zinc y manganeso). No deseche grandes cantidades de pilas alcalinas o pilas de celda de litio tipo botn en grupo. Las pilas usadas a menudo no estn completamente agotadas. Si se agrupan, estas pilas activas pueden entrar en contacto entre s y crear riesgos para la seguridad. Para evitar esto, asle cada pila con cinta u otro material no conductor para asegurarse de que no se descargue. No se dispone an a nivel universal de procesos de reciclaje probados, rentables y seguros para el medio ambiente aplicables a las pilas alcalinas y a las pilas de celda de litio tipo botn. Algunas comunidades ofrecen el reciclado o recoleccin de estas pilas. Para obtener ms informacin, consulte sus reglamentos locales o contacte a su gobierno local. Bateras de plomo-cido: Deseche las pilas de plomo-cido llevndolas a un centro de residuos electrnicos o a un centro de reciclaje, o deschelas de acuerdo a sus reglamentos locales. (Las pilas de plomo-cido recargables son del mismo tipo que las que se usan en los automviles y deben desecharse de la misma manera). FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Declaracin sobre exposicin a las radiaciones segn normas de la FCC: Este equipo cumple los lmites de exposicin a la radiacin establecidos por la FCC para un ambiente no controlado. Este equipo debe instalarse y hacerse funcionar a una distancia mnima de 20 cm entre el radiador y el cuerpo del usuario.
1 2 | ID label and location | ID Label/Location Info | 540.87 KiB | March 17 2020 |
A B C D 1 2 3 4 5 6 67mm PARTY BOAT iSP120 IPX7 30mm Model No: ISP120 Date: 2019-12-21 Size File
Revision v1.0 Sheet of Drawn By Qiu Sheng Wu 1 2 3 4 5 6 A B C D LabelLocation
1 2 | Confidentiality | Cover Letter(s) | 79.50 KiB | March 17 2020 |
C5266091_X10_Ed.1 ION Audio, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 12/17/2019 Subject: Request for Confidentiality FCC ID: 2AB3E-ISP120 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules
(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Long-Term Confidentiality Short-Term Confidentiality Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info No No No No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: 2019/12/17 Name: Jacky Liao Title: Safety/Senior Compliance Manager 1/1
1 2 | Family declaration | Attestation Statements | 111.99 KiB | March 17 2020 |
ION Audio, LLC I, the undersigned, Declaration:
They are identical to each other, only except for model name, appearance in color or decorating parts and silkscreen for marketing purpose. 1) Model No.: PARTY BOAT 2) Model No.: ISP120 3) Model No.: PARTY BOATXXXXXXXX (XX can be 0-9, A-Z or blank) 4) Model No.: ISP120XXXXXXXX (XX can be 0-9, A-Z or blank) FCC ID: 2AB3E-ISP120 Sincerely, Clients signature : 2019/12/17 Clients name / title: Jacky Liao / Safety/Senior Compliance Manager Contact information / address: 200 Scenic View Drive, Cumberland, RI 02864, U.S.A. Telephone: 886-2-2717-2389 Fax No.: 886-2-2717-2735
1 2 | Letter Authorization | Cover Letter(s) | 80.90 KiB | March 17 2020 |
C5266091_X8_Ed.1 Letter of Authorization Company: ION Audio, LLC Address: 200 Scenic View Drive, Cumberland, RI 02864, U.S.A. Product Name: Motorized Wireless Speaker with Solar Panel and Cupholders Model Number:
PARTY BOAT, ISP120, PARTY BOATXXXXXXXX, ISP120XXXXXXXX FCC Identifier: 2AB3E-ISP120 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jacky Liao Title: Safety/Senior Compliance Manager Signature of applicant:
Date: 12/23/2019 1/1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-03-17 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-03-17
|
||||
1 2 | Applicant's complete, legal business name |
ION Audio, LLC
|
||||
1 2 | FCC Registration Number (FRN) |
0024611568
|
||||
1 2 | Physical Address |
200 Scenic View Drive, Cumberland RI 02864 U.S.A.
|
||||
1 2 |
200 Scenic View Drive, Cumberland
|
|||||
1 2 |
CUMBERLAND, RI
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
e******@applus.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AB3E
|
||||
1 2 | Equipment Product Code |
ISP120
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** L********
|
||||
1 2 | Telephone Number |
886-2********
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
j******@ionaudio.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 2 | Name |
I****** H******
|
||||
1 2 | Physical Address |
Dongguan
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
i******@gdest.cn
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 2 | Name |
I**** H****
|
||||
1 2 | Physical Address |
Dongguan
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
i******@gdest.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Motorized Wireless Speaker with Solar Panel and Cupholders | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 2 | Name |
I**** H********
|
||||
1 2 | Telephone Number |
+86 0******** Extension:
|
||||
1 2 |
i******@gdest.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2402.00000000 | 2480.00000000 | 0.0022000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2402.00000000 | 2480.00000000 | 0.0026000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC