all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.77 MiB | October 02 2017 | |||
1 | Cover Letter(s) | October 02 2017 / November 02 2017 | ||||||
1 | Cover Letter(s) | October 02 2017 / November 02 2017 | ||||||
1 | Cover Letter(s) | October 02 2017 / November 02 2017 | ||||||
1 | External Photos | October 02 2017 | ||||||
1 | Internal Photos | October 02 2017 | ||||||
1 | ID Label/Location Info | October 02 2017 / November 02 2017 | ||||||
1 | RF Exposure Info | November 02 2017 | ||||||
1 | Cover Letter(s) | October 02 2017 / November 02 2017 | ||||||
1 | Test Report | October 02 2017 / November 02 2017 | ||||||
1 | Test Setup Photos | October 02 2017 |
1 | User Manual | Users Manual | 2.77 MiB | October 02 2017 |
PARTY ROCKER MAX Quickstart Guide Gua de inicio rpido Guide d'utilisation rapide Guida rapida Schnellstart-Anleitung Snelstartgids Appendix English ( 3 6 ) Espaol ( 7 10 ) Franais ( 11 14 ) Italiano ( 15 18 ) Deutsch ( 19 22 ) Nederlands ( 23 26 ) English ( 27 ) 2 Quickstart Guide (English) Introduction Box Contents Party Rocker Max Microphone with Cable 1/8 Stereo Aux Cable Power Cable Quickstart Guide Safety & Warranty Manual Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. Rechargeable Batteries Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years. Here are some recommendations for getting the longest life from the internal battery. General Usage Fully charge the battery before using it. Charge the battery completely after each use. Storage Repair Disposal For best product longevity, do not store at exceedingly hot (greater than 90F/32C) or exceedingly cold (less than 32F/0C) temperatures. It is acceptable to leave your sound system plugged in. This will not overcharge the battery. If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity. If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still will not charge, contact ION Audio at ionaudio.com. Bring the unit to a recycling center or dispose of in accordance with local ordinances. 3 Quick Setup 1. Make sure all items listed under Introduction > Box Contents at the beginning of this guide are included in the box. 2. Read safety instruction booklet before using the product. 3. For optimal performance, place Party Rocker Max in the center of the room so it is unobstructed by walls, furniture, etc. 4. Turn down the Master Volume on the Party Rocker Max. 5. Turn on Party Rocker Max. 6. Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more details on this) 7. Adjust the volume on your music player and on Party Rocker Max as needed. 8. Adjust the Light Mode buttons on Party Rocker Max as needed. 9. Turn off Party Rocker Max when not in use. Connection Diagram Items not listed under Introduction > Box Contents are sold separately. Tablet, smartphone, etc. Power Bluetooth Device PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Microphone 4 Features Front Panel 1. Auxiliary input: This stereo 1/8 input can be used to connect a smartphone, MP3 player, or other audio source. 2. Microphone Inputs with Volume Control (1/4): These mono inputs accept 1/4 inputs such as a microphone, guitar, or other musical instrument. 1 2 AUX 1 MIC 1 MIC 2 3 POWER/
CHARGE 2 MIC VOLUME ECHO MAIN VOLUME 9 10 8 5 PARTY ROCKER MAX 4 6 ON/OFF GREEN BLUE RED ALL SPEAKER WHITE PINK ORANGE 7 LIGHT PARTY LIGHT MODE LIGHTS 3. Power/Charge LED: Indicates various states of activity on Party Rocker Max. Solid Green LED: Party Rocker Max is powered on. Solid Yellow LED: Battery is charging with the power on. Solid Green/Blinking Yellow LED: Party Rocker Max is powered on and the battery is low. Solid Red LED: Battery is charging with the power off. LED OFF: Power is off, power cable is connected, and the battery is fully charged. 4. Bluetooth LED/Disconnect Button: The LED will be lit when a device is paired to Party Rocker Max. This LED will not be lit when Party Rocker Max is first powered on (unless it was previously paired with a device). Press the button to disconnect a paired Bluetooth device. 5. All Lights On/Off: Press this button to turn all lights on or off. 6. Party Light Mode: There are four modes to select from for how the dome lights react to the music:
Beat Sync: The dome lights spin and change color to the beat of the music playing. Auto: The dome lights spin and change color with a predetermined pattern regardless of the beat of the music playing. Single Color: The lights change one color at a time and do not move. Freeze: All colors remain on and unmoving until a new mode is selected. Off: The dome lights turn off. 7. Speaker Light Mode: Press this button to cycle through these different light effects:
EQ Bars (reactive to music) Vertical Lights Wipe (non-reactive to music) Diagonal Lights Wipe (non-reactive to music) Vertical Lights Scrolling (non-reactive to music) Snowflake/Square Lights (non-reactive to music) Moving Block Bar (reactive to music) Pulsating Block (reactive to music) Horizontal Pulsating Bar (reactive to music) Diagonal with Changing Colors (reactive to music) Cross with Changing Colors (reactive to music) Solid Color (reactive to music) Pulsating Block with Spinning Block (reactive to music) Snowflake/Square Lights Fill (non-reactive to music) Spinning Crosses and Expanding Square (non-reactive to music) Vertical Pulsating Bar (reactive to music) Moving Diagonal (non-reactive to music) Off (no lights) 5 8. Light Buttons: Use these buttons to turn each color in the dome on or offRed, Green, Blue, White, Pink, and Orange. 9. Echo: Use this knob to add or remove an echo effect to the Microphone Inputs. 10. Master Volume Control: This adjusts the speakers main mix volume, which includes Microphone Inputs, Auxiliary Input, and the audio of a paired Bluetooth device. Rear Panel 1. Power On/Off Switch: Turns Party Rocker Max on or off. 2. Power Cable Input (IEC): Insert the included power cable here to power the unit. 3. Fuse: If the units fuse is broken, lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating. Using a fuse with an incorrect rating can damage the unit and/or fuse. POWER 1 AC IN OFF 3 ON 2 Connecting with a Bluetooth Device 1. Turn on your Bluetooth device. 2. Power on Party Rocker Max and it will automatically go into pairing mode to search for 3. Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is off. If your Bluetooth device is not able to pair to Party Rocker Max, press the Bluetooth Disconnect button on the unit to break previous Bluetooth connections and reset the Bluetooth module. 4. Navigate to your Bluetooth devices setup screen, find Party Rocker Max and connect. Note: If your Bluetooth device prompts for a pairing code, enter 0000. 5. Bluetooth LED will light up solid when it is paired. Note: If you experience trouble pairing or playing music, update your device's OS. 6. To disconnect pairing, press the Bluetooth Disconnect button on Party Rocker Max. 7. To connect to another Bluetooth device, repeat steps 3-4. Note: Maximum range will be achieved when using devices with Bluetooth 4.0. Troubleshooting If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to reduce the overall volume of Party Rocker Max. If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs. If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphone away from the speaker. If you cant hear the microphone over the music volume: Turn down the music volume from your source. 6 Gua de inicio rpido (Espaol) Introduccin Contenido de la caja Party Rocker Max Micrfono y cable Cable auxiliar estreo de 3,5 mm (1/8 pulg.) Cable de alimentacin Gua de inicio rpido Manual sobre la seguridad y garanta Soporte Para obtener la informacin ms completa acerca de este product (los requisitos del sistema, compatibilidad, etc) y registro del producto, visite ionaudio.com. Bateras recargables Las bateras de plomo-cido recargables son del mismo tipo que se usa en los automviles. Al igual que con la batera del vehculo, la forma en que se usa tiene una influencia significativa en la duracin de su vida til. Con un uso y tratamiento correctos, una batera de plomo-cido puede durar varios aos. He aqu algunas recomendaciones para prolongar la vida til de la batera interna. Uso general Cargue completamente la batera antes de usarla. Cargue la batera completamente despus de cada uso. Almacenamiento Para lograr la mayor longevidad del producto, no lo almacene a temperaturas muy altas (superiores 32C/90F) o muy fras (inferiores a 0C/32F). Es aceptable dejar su sistema de sonido enchufado. No sobrecargar la batera. Si deja que el nivel de la batera baje y no la carga durante 6 meses, puede perder permanentemente su capacidad. Reparacin Si la batera no se carga, compruebe su fusible cerca de la entrada del cable de alimentacin. Si el fusible est intacto y la batera sigue sin cargarse, pngase en contacto con ION Audio en ionaudio.com. Disposicin final Lleve la unidad a un centro de reciclaje o deschela de acuerdo a las ordenanzas locales. 7 Instalacin rpida 1. Asegrese que todos los artculos incluidos en Introduccin > Contenido de la caja, al comienzo de esta gua, estn incluidos en la caja. 2. Lea el folleto de instrucciones de seguridad antes de utilizar el producto. 3. Para lograr un rendimiento ptimo, coloque el Party Rocker Max en el centro de la sala donde no est obstaculizado por paredes, muebles, etc. 4. Baje el control de volumen maestro del Party Rocker Max. 5. Encienda el Party Rocker Max. 6. Conecte su reproductor de msica con un cable de audio o Bluetooth (para obtener ms detalles de esto, consulte Conexin con un dispositivo Bluetooth). 7. Ajuste el volumen en su reproductor musical y en el Party Rocker Max segn sea necesario. 8. Ajuste el botones de modo de luz del Party Rocker Max segn sea necesario. 9. Apague el Party Rocker Max cuando no lo use. Diagrama de conexin Los elementos que no se enumeran en Introduccin > Contenido de la caja se venden por separado. Tablet, telfono inteligente
(smartphone), etc. Suministro elctrico Dispositivo Bluetooth PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Micrfono 8 Caractersticas Panel frontal 1. Entrada auxiliar: Esta entrada de 3,5 mm (1/8") estreo se puede usar para conectar un tlphone, MP3 u otra fuente de audio. 2. Entradas de Micrfono con control de volumen (1/4"): Estas entradas mono admitir entradas de 6,35 mm
(1/4") tal como un micrfono, una guitarra u otro instrumento musical. 1 2 AUX 1 MIC 1 MIC 2 3 POWER/
CHARGE 2 MIC VOLUME ECHO MAIN VOLUME 9 10 8 5 PARTY ROCKER MAX 4 6 ON/OFF GREEN BLUE RED ALL SPEAKER WHITE PINK ORANGE 7 LIGHT PARTY LIGHT MODE LIGHTS 3. LED alimentacin/carga: Indica los diversos estados de actividad del Party Rocker Max. LED verde permanente = El Party Rocker Max est encendido LED amarillo permanente = Se est cargando la batera con el equipo encendido LED verde permanente/amarillo intermitente = El Party Rocker Max est encendido y la batera se est agotando. LED rojo permanente = Se est cargando la batera con el equipo apagado LED apagado = El producto est apagado, el cable de corriente est conectado y la batera est completamente cargada 4. Bluetooth LED/Botn desconectar: El LED se enciende cuando se aparea un dispositivo al Party Rocker Max. Este LED no se enciende cuando el Party Rocker Max se enciende por primera vez (a menos que hubiera sido apareado previamente con un dispositivo). Pulse el botn para desconectar un dispositivo Bluetooth apareado. 5. Encendido/apagado de todas las luces: Pulse este botn para encender y apagar todas las luces. 6. Modo de luz del domo: Es posible seleccionar entre cuatro modos de reaccin de la luz del domo a la msica:
Sincronizacin con el ritmo: Las luces del domo giran y cambian de color al ritmo de la msica en reproduccin. Automtico: Las luces del domo giran y cambian de color con un patrn predeterminado sin importar el ritmo de la msica en reproduccin. Color nico: Las luces cambian de a un color a la vez y no se mueven. Congelar: Todos los colores permanecen encendidos e inmviles hasta que se selecciona un nuevo modo. Apagadas: Las luces del domo se apagan. 7. Modo de iluminacin del altavoz: Pulse este botn para alternar los siguientes efectos de iluminacin diferentes:
Barras de ecualizacin (reactivas a la msica) Barrido de luces vertical (no reactivo a la msica) Barrido de luces diagonal (no reactivo a la msica) Desplazamiento de luces vertical (no reactivo a la msica) Luces tipo copo de nieve/cuadrado (no reactivas a la msica) Barra de movimiento en bloque (reactiva a la msica) Bloque pulsante (reactivo a la msica) Barra horizontal pulsante (reactiva a la msica) Diagonal con colores cambiantes (reactiva a la msica) Cruz con colores cambiantes (reactiva a la msica) Color slido (reactivo a la msica) Bloque pulsante con bloque giratorio (reactivo a la msica) Relleno de luces tipo copo de nieve/cuadrado (no reactivo a la msica) Cruces giratorias y cuadrado expansivo (no reactivos a la msica) Barra vertical pulsante (reactiva a la msica) Diagonal mvil (no reactiva a la msica) Apagado (sin luces) 9 8. Botones de las luces: Utilice estos botones para encender o apagar cada color en el domo rojo, verde, azul, blanco, rosa y naranja. 9. Eco: Use esta perilla para agregar o quitar un efecto de eco al Entradas de Micrfono. 10. Control de volumen maestro: Este control ajusta el volumen de la mezcla principal del altavoz, que incluye la entrada de micrfono, la entrada auxiliar, y el audio de un dispositivo Bluetooth apareado. Panel trasero 1. Interruptor de encendido / apagado: Enciende y apaga el Party Rocker Max. 2. Entrada del cavo de alimentacin (IEC): Inserte aqu el cable de alimentacin incluido para alimentacin la unidad. 3. Fusible: Si el fusible de la unidad est roto, levante esta lengeta para reemplazar el fusible. Reemplcelo por un fusible con especificacin apropiada. Si utiliza un fusible de especificacin incorrecta, puede daarse la unidad y/o el fusible. POWER 1 AC IN OFF 3 ON 2 Conexin con un dispositivo Bluetooth 1. Encienda su dispositivo Bluetooth. 2. Encienda el Party Rocker Max, que pasar automticamente al modo de apareamiento para buscar dispositivos Bluetooth. Se dar cuenta de que est en modo de apareamiento cuando el LED est apagada. 3. Si su dispositivo Bluetooth no es capaz de aparearse con el amplificador, pulse el botn de desconexin del amplificador para romper las conexiones Bluetooth anteriores y reinicie el mdulo Bluetooth. 4. Navegue a la pantalla de configuracin de su dispositivo Bluetooth, busque Party Rocker Max y conecte. Nota: Si su dispositivo Bluetooth solicita un cdigo de apareamiento, ingrese 0000. 5. El Paired (Apareado) LED Party Rocker Max se enciende con luz permanente cuando est
'apareado'. Nota: Si tiene problemas para aparear su dispositivo o reproducir msica, actualice el programa operativo de su dispositivo. 6. Para desconectar el apareamiento, pulse el botn Disconnect del Party Rocker Max. 7. Para conectarse a otro dispositivo Bluetooth, repita los pasos 3 y 4. Nota: El alcance mximo se logra cuando se utilizan dispositivos con Bluetooth 4.0. Solucin de problemas Si el sonido est distorsionado: Pruebe bajando el control de volumen de su fuente de sonido o instrumento musical. Pruebe tambin reduciendo el volumen general del Party Rocker Max. Si hay demasiados graves: Intente ajustando el control de tono o ecualizacin de su fuente de sonido para reducir el nivel de graves. De esta forma podr reproducir la msica con ms volumen antes de que se produzca el recorte (distorsin). Si hay un silbido agudo cuando se usan micrfonos: Probablemente sea realimentacin. Apunte el micrfono apartndose del altavoz. Si no puede or el micrfono por arriba del volumen de la msica: Disminuya el volumen de la msica en su fuente. 10 Guide d'utilisation rapide (Franais) Prsentation Contenu de la bote Party Rocker Max Microphone et cble Cble auxiliaire stro 3,5 mm Cble d'alimentation Guide d'utilisation rapide Consignes de scurit et informations concernant la garantie Assistance Pour les dernires informations concernant ce produit (la configuration systme minimale requise, la compatibilit, etc) et l'enregistrement du produit, veuillez visitez le site ionaudio.com. Piles rechargeables Les piles au plomb rechargeables sont du mme type que les batteries utilises dans les automobiles. Comme pour la batterie de votre automobile, la manire dont vous l'utilisez a un impact direct sur sa dure de vie. Cependant, avec une bonne utilisation la pile au plomb peut avoir une dure de vie de plusieurs annes. Voici quelques recommandations pour prolonger au maximum la dure de vie de la pile interne. Utilisation gnrale Chargez compltement la batterie avant de lutiliser. Rechargez la batterie compltement aprs chaque utilisation. Entreposage Pour optimiser la longvit du produit, ne pas entreposer dans des tempratures extrmement chaudes (suprieur 32C/90F) ou extrmement froides (moins de 0C/32F). Il est acceptable de laisser votre systme audio branch. Cela ne surchargera pas la batterie. Si vous laissez le niveau de batterie saffaiblir sans la recharger pendant 6 mois, elle risquerait de perdre sa capacit de charge de faon permanente. Rparation Si la batterie ne parvient plus se recharger, vrifier le fusible situ prs de l'entre du cble d'alimentation. Si le fusible est intact et que la batterie ne se recharge toujours pas, contactez ION Audio ionaudio.com. limination Apportez lappareil dans un centre de recyclage ou disposez selon les rglements de votre municipalit. 11 Dmarrage rapide 1. Assurez-vous que tous les articles numrs dans la section Prsentation > Contenu de la bote au dbut de ce guide sont inclus dans la bote. 2. Veuillez lire le livret des consignes de scurit avant d'utiliser le produit. 3. Pour une performance optimale, placez le Party Rocker Max dans le centre de la pice afin qu'il ny ait aucune obstruction cre par des murs, des meubles, etc. 4. Mettez le bouton volume gnral du Party Rocker Max au plus bas. 5. Mettez le Party Rocker Max sous tension. 6. Branchez votre lecteur de musique avec un cble audio ou par Bluetooth (consultez la section Jumelage dun appareil Bluetooth pour de plus amples dtails). 7. Rglez le volume de votre lecteur de musique et du Party Rocker Max au niveau souhait. 8. Rglez le touches mode dclairage du Party Rocker Max au mode dsir. 9. Mettez le Party Rocker Max hors tension lorsque vous ne lutilisez pas. Schma de connexion Les lments qui ne figurent pas dans le Prsentation > Contenu de la bote sont vendus sparment. Tablette, smartphone, etc. Alimentation Appareil Bluetooth PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Microphone 12 Caractristiques Panneau avant 1. Entre auxiliaire : Cette entre stro 3,5 mm (1/8 po) permettent de brancher un lecteur de tlphone, un lecteur MP3 ou autres sources audio. 2. Entres microphone avec commande de volume (1/4 po) : Ces entres mono peut accueillir un cble de 6,35 mm
(1/4 po) pour microphone, guitare ou un autre instrument de musique. 1 2 AUX 1 MIC 1 MIC 2 3 POWER/
CHARGE 2 MIC VOLUME ECHO MAIN VOLUME 9 10 8 5 PARTY ROCKER MAX 4 6 ON/OFF GREEN BLUE RED ALL SPEAKER WHITE PINK ORANGE 7 LIGHT PARTY LIGHT MODE LIGHTS 3. DEL d'alimentation/rechargement : Indique les diffrents tats d'activit de la Party Rocker Max. DEL dalimentation verte = La Party Rocker Max est sous tension DEL dalimentation jaune = Rechargement de la batterie lorsque lappareil est sous tension DEL dalimentation verte/jaune clignotante = La Party Rocker Max est sous tension et la batterie est faible. DEL dalimentation rouge = Rechargement de la batterie lorsque lappareil est hors tension DEL teinte = Lappareil est hors tension, le cble d'alimentation est branch, et la batterie est compltement recharge. 4. Bluetooth DEL/Bouton dconnecter : La DEL de jumelage sera allume lorsqu'un priphrique est jumel au Party Rocker Max. Cette DEL ne sera pas allume lorsque le Party Rocker Max est d'abord aliment ( moins qu'il a t jumel avec un priphrique auparavant). Appuyez sur le bouton pour dconnecter le priphrique Bluetooth jumel. 5. Activation/dsactivation de toutes les lumires : Cette touche permet d'activer/dsactiver toutes les lumires. 6. Mode d'clairage du dme : Il y a quatre modes dclairage parmi lesquels vous pouvez choisir comment les lumires ragissent la musique :
Beat Sync : Les lumires du dme tournent et changent de couleur au rythme de la musique. Auto : Les lumires du dme tournent et changent de couleur selon une configuration prdtermine indpendamment du rythme de la musique. Couleur unique : Les lumires changent une couleur la fois et sont fixes. Freeze : Toutes les couleurs restent allumes et sont fixes jusqu' ce quun nouveau mode est slectionn. Off : Les lumires du dme sont teintes. 7. Mode dclairage : Cette touche permet de parcourir les diffrents modes dclairage :
Barres d'galisation (mode ractif la musique) Effet de volet vertical (mode non ractif la musique) Effet de volet diagonal (mode non ractif la musique) Dfilement vertical (mode non ractif la musique) Flocons de neige et carrs (mode non ractif la musique) Bloc qui se dplace (mode ractif la musique) Bloc pulsatoire (mode ractif la musique) Barre horizontale pulsatoire (mode ractif la musique) Diagonal avec couleurs changeantes (mode ractif la musique) Croix avec couleurs changeantes (mode ractif la musique) Couleur dfinie (mode ractif la musique) Bloc pulsatoire avec bloc rotatif (mode ractif la musique) Arrire-plan de flocons de neige et de carrs (non ractif la musique) Croix tournoyantes et carr qui sagrandit (non ractif la musique) Barre verticale pulsatoire (mode ractif la musique) Dfilement diagonal (non ractif la musique) teint (aucune lumire) 13 8. Slecteur de couleurs : Utilisez ces touches pour activer ou dsactiver chaque couleur du dme rouge, vert, bleu, blanc, rose et orange. 9. Echo : Ce bouton de rglage permet dajouter ou de supprimer un effet dcho au Entres microphone. 10. Volume gnral : Ce bouton permet de rgler le volume du mix gnral qui comprend l'entre microphone, lentre auxiliaire, et l'audio d'un priphrique Bluetooth jumel. Panneau arrire 1. Interrupteur Marche/Arrt : Permet de mettre le Party Rocker Max sous et hors tension. 2. Entre du cble d'alimentation (IEC) : Brancher le cble d'alimentation ci-inclus ici pour d'alimentation l'appareil. 3. Fusible : Si le fusible de l'appareil est endommag, soulevez cette languette afin de remplacer le fusible. Remplacez-le par un fusible de calibre appropri. L'utilisation d'un inappropri pourrait endommager l'appareil et/ou le fusible. fusible de calibre POWER 1 AC IN OFF 3 ON 2 Jumelage dun appareil Bluetooth 1. Mettez votre priphrique Bluetooth sous tension. 2. Mettez le Party Rocker Max sous tension et il passera automatiquement en mode jumelage afin de rechercher les priphriques Bluetooth. Vous saurez que vous tes en mode jumelage lorsque la DEL devient teinte. 3. Si votre priphrique Bluetooth ne parvient pas se jumeler lamplificateur, appuyez sur le bouton Disconnect de lamplificateur afin de supprimer la connexion d'autres priphriques Bluetooth et remettre zro le module Bluetooth. 4. Accdez l'cran de configuration de votre priphrique Bluetooth, recherchez Party Rocker Max et lancez le jumelage. Remarque : Si votre priphrique Bluetooth vous demande dentrer un code de jumelage, entrez 0000. 5. La jumelage DEL du Party Rocker Max sallumera lorsque le jumelage est russi. Remarque : Si vous prouvez de la difficult jumeler votre appareil ou faire jouer de la musique, faites une mise jour du systme d'exploitation de votre appareil. 6. Appuyez sur le bouton Disconnect du Party Rocker Max pour dconnecter le priphrique Bluetooth branch. 7. Pour jumeler un autre priphrique Bluetooth, rptez les tapes 3 et 4. Remarque : La plage maximale peut tre atteinte avec lutilisation dappareils dots de Bluetooth 4.0. Guide de dpannage Lorsquil y a de la distorsion : Essayez de diminuer le volume sur lappareil dentre audio ou linstrument de musique. Essayez galement de rduire le volume gnral du Party Rocker Max. Lorsquil y a trop de basses frquences : Essayez de rgler le niveau de tonalit et dgalisation sur lappareil de source dentre audio afin de diminuer le niveau des basses frquences. Cela vous permettra d'augmenter le volume de la musique avant que l'crtage se produise. Lorsquil y a un sifflement aigu lors de lutilisation des microphones : Ceci est probablement caus par leffet Larsen (feedback). Dirigez les microphones loin des haut-parleurs. Si vous ne pouvez entendre le microphone au-dessus de la musique : diminuez le volume de la musique de la source audio. 14 Guida rapida (Italiano) Introduzione Contenuti della confezione Party Rocker Max Microfono e cavo Cavo aux stereo da 3,5 mm Cavo di alimentazione Guida rapida Istruzioni di sicurezza e garanzia Assistenza Per conoscere le ultime informazioni in merito a questo prodotto (i requisiti di sistema complete, compatibilit, ecc) e per la registrazione del prodotto, recarsi alla pagina ionaudio.com. Batterie ricaricabili Le batterie ricaricabili al piombo-acido sono dello stesso tipo di quelle utilizzate nelle automobili. Come nel caso della batteria dell'auto, la maniera in cui si utilizza questa batteria ha un notevole impatto sulla sua vita utile. Con un utilizzo adeguato, una batteria al piombo-
acido pu durare per anni. Ecco alcune raccomandazioni per garantire la massima durata dalla batteria interna. Utilizzo generico Caricare a fondo il prodotto prima dell'uso. Caricare a fondo il prodotto prima di riporlo. Come riporre lapparecchio Per la massima longevit del prodotto, evitare di riporlo a temperature eccessivamente elevate (superiori a 32C/90F) o eccessivamente fredde
(meno di 0C/32F). L'impianto audio pu essere lasciato collegato. Cos facendo la batteria non si sovraccarica. Se si lascia il livello della batteria basso e non la si ricarica per 6 mesi, potrebbe perdere capacit in via permanente. Riparazioni Se la batteria non si carica, verificare le condizioni del fusibile presso l'ingresso del cavo di alimentazione. Se il fusibile non intatto e non si carica, contattare il dipartimento parti di ricambio alla pagina ionaudio.com. Come eliminare lapparecchio Recarsi con lapparecchio presso un centro di riciclaggio oppure eliminarlo in conformit con le normative locali. 15 Inizio rapido 1. Assicurarsi che tutti gli elementi elencati nel paragrafo Introduzione > Contenuti della confezione sul frontespizio della presente guida si trovino nella confezione. 2. Leggere attentamente il libretto delle istruzioni di sicurezza prima di utilizzare il prodotto. 3. Per ottenere prestazioni ottimali, collocare l'Party Rocker Max al centro della stanza in modo che non sia ostacolato da pareti, mobili, ecc. 4. Abbassare il volume Master sul Party Rocker Max. 5. Accendere il Party Rocker Max. 6. Collegare il lettore musicale con un cavo audio o Bluetooth (per maggiori informazioni in merito, si veda il paragrafo Collegamento di un dispositivo Bluetooth). 7. Regolare il volume del lettore musicale e del Party Rocker Max come desiderato. 8. Regolare l'interruttori Light Mode (modalit luce) sul Party Rocker Max come desiderato. 9. Spegnere il Party Rocker Max quando non in uso. Schema dei collegamenti Elementi non elencati sotto Introduzione > Contenuti della confezione sono venduti separatamente. Tablet, smartphone, ecc. Alimentazione Dispositivo Bluetooth PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Microfono 16 Caratteristiche Pannello anteriore 1. 1 ausiliario:
Ingresso questo ingresso stereo da 3,5 mm (1/8") pu essere utilizzato per collegare un tlphone, un lettore MP3 o altre sorgenti audio. Ingressi microfono con controllo di guadagno volume
(1/4"):
questi ingressi mono accettare un ingresso da 6,35 mm (1/4") quali un microfono, chitarra o altro strumento musicale. PARTY ROCKER MAX 4 6 10 MAIN VOLUME 2 2 3 5 7 MIC VOLUME 9 POWER/
CHARGE ECHO PARTY LIGHT SPEAKER ORANGE ON/OFF LIGHTS GREEN WHITE MODE LIGHT AUX 1 MIC 2 BLUE MIC 1 PINK RED ALL 8 2. 3. LED di alimentazione/carica: indica i diversi stati di attivit del Party Rocker Max. LED verde fisso = il Party Rocker Max acceso LED giallo fisso = la batteria in ricarica con l'alimentazione accesa LED verde fisso/giallo lampeggiante = il Party Rocker Max acceso e la batteria scarica LED rosso fisso = la batteria in ricarica con l'alimentazione spenta LED SPENTO = L'alimentazione spenta, il cavo di alimentazione collegato e la batteria carica 4. Bluetooth LED/Pulsante scollega: il LED sar acceso quando un dispositivo accoppiato al Party Rocker Max. Il LED non sar acceso quando il Party Rocker Max viene acceso (a meno che non fosse accoppiato in precedenza con un dispositivo). Premere il pulsante per scollegare di un dispositivo Bluetooth accoppiato. 5. Tutte le luci accese/spente: premere questo tasto per accendere e spegnere tutte le luci. 6. Modalit luci della cupola: Vi sono quattro modalit tra cui scegliere per come la cupola reagisce alla musica:
Beat Sync: le luci a cupola girano e cambiano colore al ritmo della musica che sta suonando. Auto: le luci a cupola girano e cambiano colore con uno schema predeterminato, indipendentemente dal beat della musica che sta suonando. Single Color (colore singolo): le luci cambiano un colore alla volta e non si muovono. Freeze: tutti i colori rimangono accesi e immobili fino a quando non viene selezionata un'altra modalit. Off: le luci a cupola si spengono. 7. Modalit di illuminazione altoparlante: premere questo tasto per commutare tra queste diverse modalit di illuminazione:
Barre EQ (reattive alla musica) Luci verticali a comparsa (non reattive alla musica) Luci diagonali a comparsa (non reattive alla musica) Scorrimento luci verticali (non reattive alla musica) Luci a fiocchi di neve/quadrate (non reattive alla musica) Barre mobili a blocchi (reattive alla musica) Blocco pulsante (reattivo alla musica) Barra orizzontale pulsante (reattiva alla musica) Diagonale con colori mutevoli (reattiva alla musica) Croce con colori mutevoli (reattiva alla musica) Colore unico (reattivo alla musica) Blocco pulsante con blocco girevole (reattivo alla musica) Fill di luci a fiocchi di neve/quadrate (non reattivo alla musica) Croci rotanti e quadrato in espansione (non reattivo alla musica) Barra verticale pulsante (reattiva alla musica) Diagonale mobile (non reattiva alla musica) Off (nessuna luce) 17 8. Tasti luce: servirsi di questi tasti per accendere o spegnere ciascun colore della cupola rosso, verde, blu, bianco, rosa e arancione. 9. Echo: servirsi di questa manopola per aggiungere o rimuovere un effetto eco al Ingressi microfono. 10. Comando volume Master: questo comando regola il volume principale di mix dell'altoparlante, che comprende l'ingresso microfono, l'ingresso ausiliario (aux), e l'audio di un dispositivo Bluetooth accoppiato. Pannello posteriore 1. Interruttore di alimentazione On/Off: accende o spegne il Party Rocker Max. Ingresso cavo di alimentazione (IEC): inserire il cavo di alimentazione in dotazione per alimentazione l'apparecchio. 2. 3. Fusibile: se il fusibile dell'apparecchio rotto, sollevare questa linguetta per sostituirlo. Sostituire il fusibile con uno dalla tensione nominale adeguata. L'utilizzo di un fusibile dalla tensione nominale errata pu danneggiare l'apparecchio e/o il fusibile. POWER 1 AC IN OFF 3 ON 2 Collegamento di un dispositivo Bluetooth 1. Accendere il dispositivo Bluetooth. 2. Accendere il Party Rocker Max: entrer automaticamente in modalit di accoppiamento per cercare dispositivi Bluetooth. Siete in modalit di accoppiamento quando il LED spenta. 3. Se il dispositivo Bluetooth non in grado di allinearsi con l'amp, premere il tasto di scollegamento sull'amp per interrompere precedenti collegamenti Bluetooth e resettare il modulo Bluetooth. 4. Navigare nella schermata di configurazione del dispositivo Bluetooth, trovare Party Rocker 5. Max e collegarlo. Nota bene: se il dispositivo Bluetooth richiede un codice, inserire 0000. Il accoppiato LED del Party Rocker Max rimarr illuminato quando "accoppiato". Nota bene: in caso di problemi nell'accoppiare gli apparecchi o nel riprodurre la musica, aggiornare il sistema operativo del dispositivo. 6. Per annullare il collegamento, premere il pulsante "Disconnect" (scollega) sul Party Rocker Max. 7. Per collegarlo ad un altro dispositivo Bluetooth, ripetere i passaggi 3-4. Nota bene: la portata massima sar raggiunta utilizzando dispositivi dotati di Bluetooth 4.0. Risoluzione di problemi Il suono distorto: provare ad abbassare il volume della propria fonte audio o dello strumento musicale. Inoltre, provare a ridurre il volume complessivo del Party Rocker Max. Eccessivi bassi: provare a regolare la tonalit o il comando EQ a livello della fonte audio per abbasare il livello dei bassi. Ci permetter di suonare la musica pi forte prima che salti (che si verifichi distorsione). Quando si utilizzano i microfoni si verifica un fischio ad alto pitch: si tratta probabilmente di ritorno. Puntare i microfoni lontani dalle casse. Se non si sente il microfono al di sopra del volume della musica: abbassare il volume della musica a livello della fonte. 18 Schnellstart-Anleitung (Deutsch) Einfhrung Lieferumfang Party Rocker Max Mikrofon und Kabel 3,5 mm Stereo Aux-Kabel Netzkabel Schnellstart-Anleitung Sicherheitshinweise und Garantieinformationen Kundendienst Fr aktuelledie neuesten Informationen zu diesem Produkt (Systemanforderungen, Informationen zur Kompatibilitt etc.) und zur Produktregistrierung besuchen Sie ionaudio.com. Wiederaufladbare Batterien Bei wiederaufladbaren Bleibatterien handelt es sich um die gleiche Art von Batterien, die in Autos verwendet werden. Und wie bei Ihrer Autobatterie ist es auch fr die Benutzungsdauer dieser Batterie von uerster Wichtigkeit, wie sie verwendet wird. Bei vorschriftsmigem Gebrauch und richtiger Pflege kann eine Bleibatterie jahrelang halten. Lesen Sie die nachstehenden Empfehlungen, um aus der eingebauten Batterie das Beste herauszuholen. Allgemeine Verwendung Laden Sie den Akku vollstndig auf, bevor Sie ihn verwenden. Laden Sie den Akku nach jedem Gebrauch vollstndig auf. Aufbewahrung Lagern Sie das Produkt nie bei extrem warmen (mehr als 32C/90F) oder bermig kalten (weniger als 0C/32F) Temperaturen, um die optimale Langlebigkeit zu erzielen. Sie knnen Ihr Sound-System angesteckt lassen. Der Akku wird dabei nicht berladen. Wenn Ihr Akku einen niedrigen Ladestand hat und Sie ihn 6 Monate lang nicht aufladen, kann er dauerhaft an Kapazitt verlieren. Reparatur Wenn sich der Akku nicht aufladen lsst, berprfen Sie die Sicherung in der Nhe des Netzkabelanschlusses. Wenn Ihre Sicherung intakt ist und sich der Akku weiterhin nicht aufladen lsst, kontaktieren Sie ION Audio ber ionaudio.com. Entsorgung Bringen Sie das Gert in ein Recyclingzentrum oder entsorgen Sie es entsprechend lokaler Verordnungen. 19 Schnelles Einrichten 1. Achten Sie darauf, dass alle am Beginn dieser Anleitung aufgefhrten Teile in der Schachtel enthalten sind. 2. Lesen Sie die Sicherheitshinweise, bevor Sie das Produkt verwenden. 3. Um eine optimale Leistung zu erzielen, platzieren Sie Party Rocker Max am besten in der Raummitte, damit das Gert nicht durch Wnde, Mbel usw. behindert wird. 4. Regeln Sie die Gesamtlautstrke am Party Rocker Max herunter. 5. Schalten Sie den Party Rocker Max ein. 6. Verbinden Sie Ihren Musik-Player mit einem Audiokabel oder via Bluetooth (siehe Verbindung mit einem Bluetooth-Gert fr weitere Details zu diesem Thema). 7. Stellen Sie die Lautstrke auf Ihrem Musik-Player und am Party Rocker Max nach Wunsch ein. 8. Stellen Sie den Lichtmodus-Schaltern am Party Rocker Max nach Bedarf ein. 9. Schalten Sie den Party Rocker Max aus, wenn das Gert nicht in Gebrauch ist. Anschlussdiagramm Teile, die nicht unter Einfhrung > Lieferumfang angegeben sind, sind separat erhltlich. Tablet, Smartphone, usw. Stromversorgung PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Mikrofon Bluetooth-Gert 20 Funktionen Vorderseite 1. AUX-Eingang: Dieser 3,5 mm
(1/8") Stereo-Eingang kann dazu verwendet werden, tlphone, einen MP3-Player oder eine andere Audio-Quelle anzuschlieen. 2. Mikrofon Eingnge mit Lautstrke-
Regler (6,35 mm Klinke): Diese Mono Eingnge sind kompatibel mit normalen Klinkenkabeln von einem Mikrofon, einer Gitarre oder einem anderen Musikinstrument. 1 2 AUX 1 MIC 1 MIC 2 3 POWER/
CHARGE 2 MIC VOLUME ECHO MAIN VOLUME 9 10 8 5 PARTY ROCKER MAX 4 6 ON/OFF GREEN BLUE RED ALL SPEAKER WHITE PINK ORANGE 7 LIGHT PARTY LIGHT MODE LIGHTS 3. Power/Charge-LED: Zeigt die verschiedenen Aktivitten des Party Rocker Max. Stete grne LED = Party Rocker Max ist eingeschaltet Stete gelbe LED = Akku wird bei eingeschaltetem Gert aufgeladen Stete grne / gelb blinkende LED = Party Rocker Max ist eingeschaltet und der Akku ist schwach. Stete rote LED = Gert ist ausgeschaltet, Akku wird aufgeladen LED AUS = Gert ist ausgeschaltet, Netzkabel ist angeschlossen und Akku ist vollstndig geladen 4. Bluetooth LED/Taste Trennen: Die LED leuchtet, wenn ein Gert mit dem Party Rocker Max gekoppelt ist. Diese LED leuchtet nicht, wenn der Party Rocker Max zum ersten Mal eingeschaltet wird
(es sei denn, er wurde zuvor mit einem Gert gekoppelt). Drcken Sie die Taste, um ein angeschlossenes Bluetooth-Gert zu trennen. 5. Alle Lichter ein-/ausschalten: Drcken Sie diese Taste, um die Lichter ein-/auszuschalten. 6. Kuppel Licht-Modus: Es gibt vier Modi, die bestimmen, wie die Kuppel-Lichter auf die Musik reagieren:
Beat Sync: Die Lichter in der Kuppel drehen sich und wechseln die Farbe im Takt der Musik. Auto: Die Lichter in der Kuppel drehen sich und wechseln die Farbe in einem vorgegebenen Muster unabhngig vom Takt der Musik. Einzelne Farbe: Die Lichter wechseln nacheinander die Farbe und bewegen sich nicht. Einfrieren: Alle Farben bleiben solange eingeschaltet und unbewegt bis ein neuer Modus ausgewhlt wird. Aus: Die Kuppellichter schalten sich aus. 7. Lautsprecher-Lichtmodus: Drcken Sie diese Taste, um durch folgende unterschiedliche Lichteffekte zu blttern:
EQ-Anzeige (reagiert auf die Musik) Vertikales Wischen (reagiert nicht auf die Musik) Diagonales Wischen (reagiert nicht auf die Musik) Vertikales Scrolling (reagiert nicht auf die Musik) Schneeflocke/Quadrat (reagiert nicht auf die Musik) Sich bewegende Blockleiste (reagiert auf die Musik) Pulsierender Block (reagiert auf die Musik) Horizontale, pulsierende Leiste (reagiert auf die Musik) Diagonal mit Farbwechsel (reagiert auf die Musik) Kreuz mit Farbwechsel (reagiert auf die Musik) Durchgehende Farbe (reagiert auf die Musik) Pulsierender und drehender Block (reagiert auf die Musik) Schneeflocke/Quadrat, ausgefllt (reagiert nicht auf die Musik) Drehende Kreuze und sich ausdehnendes Quadrat (reagiert nicht auf die Musik) Vertikale, pulsierende Leiste (reagiert auf die Musik) Diagonale Bewegung (reagiert nicht auf die Musik) Aus (keine Lichter) 21 8. Lichttasten: Mit diesen Tasten knnen Sie jede Farbe in der Kuppel ein- oder ausschalten - Rot, Grn, Blau, Wei, Rosa und Orange. 9. Echo: Mit diesem Regler knnen Sie den Echoanteil des Mikrofons Eingnge regulieren. 10. Gesamtlautstrkeregler: Regelt die Gesamtlautstrke des Lautsprechers. Dies beinhaltet den Mikrofon-Eingang, den AUX-Eingang, und das Audiosignal eines gekoppelten Bluetooth-Gerts. Rckseite 1. Power On/Off Schalter: Schaltet den Party Rocker Max an oder aus. 2. Netzkabel-Eingang (IEC): Schlieen Sie hier das mitgelieferte Netzkabel zum Netz der Batterie an. 3. Sicherung: Wenn die Sicherung des Gerts beschdigt ist, heben Sie diese Lasche an, um die Sicherung zu ersetzen. Ersetzen Sie sie mit einer Sicherung, die einen geeigneten Sicherungswert besitzt. Die Verwendung einer Sicherung mit falschem Sicherungswert kann das Gert und/oder Sicherung beschdigen. POWER 1 AC IN OFF 3 ON 2 Verbindung mit Einem Bluetooth-Gert 1. Schalten Sie Ihr Bluetooth-Gert ein. 2. Schalten Sie Party Rocker Max ein und das Gert wird automatisch in den Koppel-Modus schalten, um nach Bluetooth-Gerten zu suchen. Sie sind im Koppel-Modus, wenn die LED nicht ausgeschaltet. 3. Wenn Ihr Bluetooth-Gert nicht an den Verstrker gekoppelt werden kann, drcken Sie am Verstrker die Taste Trennen, um alte Bluetooth-Verbindungen zu trennen und das Bluetooth-
Modul zurckzusetzen. 4. Navigieren Sie zum Setup-Bildschirm Ihres Bluetooth-Gerts, suchen Sie Party Rocker Max und verbinden Sie die Gerte. Hinweis: Wenn Ihr Bluetooth-Gert die Eingabe eines Koppel-Codes anfordert, geben Sie 0000 ein. 5. Die gekoppelt Party Rocker Max LED wird durchgehend leuchten, wenn die Gerte "gekoppelt"
sind. Hinweis: Wenn Sie Probleme bei der Musikwiedergabe oder beim Koppeln Ihres Gertes haben, aktualisieren Sie das OS Ihres Gertes. 6. Wenn Sie die Gerte entkoppeln mchten, drcken Sie die Taste "Trennen" am Party Rocker Max. 7. Um ein anderes Bluetooth-Gert zu verbinden, wiederholen Sie die Schritte 3-4. Hinweis: Die maximale Reichweite wird erreicht, wenn Sie Gerte mit Bluetooth 4.0 verwenden. Fehlerbehebung Der Ton klingt verzerrt: Drehen Sie den Lautstrkeregler an Ihrer Tonquelle oder dem Musikinstrument zurck. Versuchen Sie auch, die Gesamtlautstrke des Party Rocker Max zu reduzieren. Zu viel Bass: Versuchen Sie, den Ton- oder EQ-Regler Ihrer Tonquelle anzupassen, um den Bass zu verringern. Dies ermglicht Ihnen, die Musik lauter abzuspielen, bevor der Klang verzerrt. Bei der Verwendung von Mikrofonen tritt einer hoher Pfeifton auf: Hier handelt es sich wahrscheinlich um einen Rckkopplungseffekt. Richten Sie es so ein, dass die Mikrofone vom Lautsprecher wegzeigen. Wenn das Mikrofon im Vergleich zur Musik zu leise eingestellt ist: Verringern Sie die Musiklautstrke Ihrer Quelle. 22 Snelstartgids (Nederlands) Introductie Inhoud van de doos Party Rocker Max Microfoon en kabel Stereo aux-kabel van 3,5 mm Stroomkabel Snelstartgids Veiligheids-en garantie handleiding Ondersteuning Voor de laatste informatie over dit product (systeemvereisten, compatibiliteitsinformatie, enz.) en productregistratie, bezoek ionaudio.com. Herlaadbare accu's Oplaadbare loodzwavelzuuraccu's zijn van hetzelfde type dat gebruikt wordt in auto's. Zoals met de accu van uw auto wordt de levensduur ervan in grote mate bepaald door uw gebruik ervan. Bij een juist gebruik en behandeling kan een loodzwavelzuuraccu jaren meegaan. Hier zijn wat aanbevelingen voor het zo lang mogelijk laten meegaan van de interne accu. Algemeen gebruik Laad de accu voor gebruik volledig op. Laad de accu na elk gebruik volledig op. Opslag Voor een optimale levensduur mag u de accu niet in een te warme (meer dan 32C/90F) of te koude omgeving (minder dan 0C/32F) bewaren. Uw geluidssysteem mag aangesloten blijven. Dat zal de accu niet overladen. Als u het accuniveau laag houdt en 6 maanden lang niet herlaadt, dan kan zich een permanent capaciteitsverlies voordoen. Herstellen Als de accu niet wil opladen, controleer dan de zekering naast de stroomingang. Als uw zekering intact is en het apparaat nog steeds niet wil opladen, neem dan contact op met ION Audio op ionaudio.com. Verwijdering Breng de accu naar een recyclagecentrum of verwijder hem conform de plaatselijke wetgeving. 23 Snelstart 1. Zorg ervoor dat de doos alle voorwerpen bevat, opgesomd in Introductie > Inhoud van de doos aan het begin van deze gids. 2. Lees de brochure met veiligheidsvoorschriften vooraleer het product te gebruiken. 3. Plaats de Party Rocker Max voor optimale prestaties in het midden van de kamer, zodat hij niet wordt gehinderd door muren, meubels, enz. 4. Zet de hoofdvolumeknop van de Party Rocker Max op de laagste stand. 5. Zet de Party Rocker Max aan. 6. Verbind uw muziekspeler met een audiokabel of via Bluetooth (zie voor meer details Verbinding maken met een Bluetooth-apparaat). 7. Pas het volume op uw muziekspeler en op de Party Rocker Max aan naar behoefte. 8. Pas de schakelaars Lichtmodus op de Party Rocker Max aan naar behoefte. 9. Zet de Party Rocker Max uit wanneer hij niet wordt gebruikt. Aansluitschema Artikelen die niet zijn opgesomd in Introductie > Inhoud van de doos worden afzonderlijk verkocht. Tablet, smartphone, enz. Stroom PARTY ROCKER MAX ECHO MAIN VOLUME AUX 1 MIC 1 MIC 2 POWER/
CHARGE ALL ON/OFF RED GREEN BLUE MIC VOLUME PARTY LIGHT SPEAKER LIGHT MODE WHITE PINK ORANGE LIGHTS Microfoon Bluetooth-apparaat 24 Kenmerken Voorpanel 1. Aux-ingang: Deze stereo 3,5 mm
(1/8")-ingang kan worden gebruikt om een tlphone, mp3-speler of andere geluidsbron te verbinden. 2. Microfoon-ingangen met volume-
(1/4"): Deze mono-
besturing ingangen 1/4"-input accepteren zoals microfoon, gitaar of andere muziekinstrumenten. 1 2 AUX 1 MIC 1 MIC 2 3 POWER/
CHARGE 2 MIC VOLUME ECHO MAIN VOLUME 9 10 8 5 PARTY ROCKER MAX 4 6 ON/OFF GREEN BLUE RED ALL SPEAKER WHITE PINK ORANGE 7 LIGHT PARTY LIGHT MODE LIGHTS 3. Stroom/Charge LED: Geeft de activiteitsstatus van Party Rocker Max weer. Vaste groene led = Party Rocker Max is ingeschakeld. Vaste gele led = De batterij is aan het laden en het toestel is ingeschakeld. Vaste groene led / knipperende gele led = Party Rocker Max is ingeschakeld en de batterij is Vaste rode led = De batterij is aan het laden en het toestel is uitgeschakeld. Led uit = het apparaat is uitgeschakeld, de stroomkabel aangesloten en de batterij volledig bijna leeg. opgeladen. 4. Bluetooth LED/Knop Verbreken: De LED begint te branden wanneer er een apparaat aan de Party Rocker Max wordt gekoppeld. Deze LED licht niet op wanneer de Party Rocker Max voor het eerst wordt aangezet (tenzij het voorheen aan een apparaat was gekoppeld). Druk op de knop verbreken om een gekoppeld Bluetooth-apparaat. 5. Alle lichten aan/uit: Druk op deze knop om alle lichten aan of uit te zetten. 6. Koepel Lichtmodus: U kunt kiezen uit vier modi om te selecteren hoe de lichten van de koepel op muziek reageren:
Beat Sync: De lichten van de koepel draaien en veranderen van kleur op het ritme van de muziek. Auto: De lichten van de koepel draaien en veranderen van kleur volgens een vooraf bepaald patroon, ongeacht het ritme van de muziek. Enkel Kleur: De verlichting verandert van n kleur op een tijd en niet bewegen. Freeze: Alle kleuren blijven onbeweeglijk branden tot een nieuwe modus wordt geselecteerd. Uit: De lichten van de koepel uitzetten. 7. Verlichtingsmodus luidspreker: Druk op deze knop om deze verschillende lichteffecten te doorlopen:
EQ-balken (reageren op de muziek) Verticaal vegen (reageert niet op de muziek) Diagonaal vegen (reageert niet op de muziek) Verticaal rollen (reageert niet op de muziek) Sneeuwvlokken/Vierkante lichten (reageren niet op de muziek) Bewegende balk (reageert op de muziek) Pulserend blok (reageert op de muziek) Horizontale pulserende balk (reageert op de muziek) Diagonaal met veranderende kleuren (reageert op de muziek) Kruis met veranderende kleuren (reageert op de muziek) Vaste kleur (reageert op de muziek) Pulserend blok met draaiend blok (reageert op de muziek) Opvulling met sneeuwvlokken/vierkante lichten (reageren niet op de muziek) Draaiende kruisen en Groeiend vierkant (reageert niet op de muziek) Verticale pulserende balk (reageert op de muziek) Diagonale beweging (reageert niet op de muziek) Uit (geen verlichting) 25 8. Lichtknoppen: Gebruik deze knoppen om elke kleur in de Koepel aan of uit te zetten: rood, groen, blauw, wit, roze en oranje. 9. Echo: Gebruik deze knop toe te voegen of te verwijderen van een echo-effect aan de microfoon ingangen. 10. Hoofdvolumeregeling: Hiermee past u het maximale volume van de hoofdmix in de luidspreker aan. Tot de hoofdmix behoren de microfooningang, de aux-ingang, en het geluidssignaal van een gekoppeld Bluetooth-apparaat. Achterpaneel 1. Stroom Aan/Uit schakelaar: Schakelt de Party Rocker Max in of uit. 2. Stroomkabel-ingang (IEC): Steek de meegeleverde stroomkabel hierin om de unit op te stroom. 3. Zekering: Als de zekering van het apparaat kapot is, vervang deze door een zekering van passende waarde. Het toestel kan beschadigt raken door een zekering met een foute waarde. POWER 1 AC IN OFF 3 ON 2 Verbinding maken met een Bluetooth-apparaat 1. Zet uw Bluetooth-apparaat aan. 2. Bij het aanzetten van Party Rocker Max zet het zich automatisch in koppelmodus, om te zoeken naar Bluetooth-apparaten. U merkt wanneer u zich in koppelingsmodus bevindt als de LED niet uitgeschakeld. 3. Als uw Bluetooth-apparaat zich niet kan koppelen aan de versterker, druk dan op de knop Verbinding verbreken op de versterker om de vorige Bluetooth-verbindingen te verbreken en de Bluetooth-module opnieuw in te stellen. 4. Navigeer naar het instelscherm van uw Bluetooth-apparaat, zoek naar "Party Rocker Max" en maak verbinding. Opmerking: Als uw Bluetooth-apparaat om een koppelingscode verzoekt, voer dan 0000 in. 5. Na 'koppeling' gaat de LED op Party Rocker Max ononderbroken branden. Opmerking: Als u problemen ondervindt bij het koppelen van uw apparaat of het afspelen van muziek, update dan het besturingssysteem van uw apparaat. 6. Om de koppeling ongedaan te maken, drukt u op de knop 'verbreken' op de Party Rocker Max. 7. Om het te verbinden met een ander Bluetooth-apparaat, herhaalt u stappen 3-4. Opmerking: Het maximumbereik wordt bereikt met apparaten die zijn voorzien van Bluetooth 4.0. Problemen Oplossen Het geluid is vervormd: Probeer het volumeniveau aan de geluidsbron of het muziekinstrument lager te zetten. Probeer ook om het hoofdvolume van de Party Rocker Max te verminderen. Er zijn teveel bassen: Probeer op de toon- of EQ-bedieningsknoppen aan uw geluidsbron het niveau van de lage tonen te verlagen. Dit stelt u in staat de muziek luider te zetten vooraleer afgeknipte (vervormde) klanken optreden. Er is een hoge fluitende pieptoon bij het gebruik van microfoons: Dit is waarschijnlijk feedback. Richt de microfoon weg van de luidspreker. Als u de microfoon niet kan horen boven het geluid van de muziek: Verlaag het volume van de muziek van uw geluidsbron. 26 Appendix (English) Technical Specifications Output Power 100 W (peak) Drivers Bluetooth 8 / 203 mm woofer 3 / 76 mm tweeter Profile: A2DP, AVRCP Range: Up to 100 feet / 30.5 meters *
Frequency Response 65 Hz 20 kHz (+ 3 dB) Microphone Type Dynamic microphone recommended (included) Battery 12 V, 9.0 Ah SLA Battery Life **
(when fully charged) Up to 75 hours (with music only) Up to 6 hours (with lights and music) Recharge Time 10 hours Power Input Voltage: 100240 VAC, 50/60 Hz, 120 W Dimensions
(width x depth x height) 11.0" x 15.0" x 17.25"
279 x 381 x 438 mm Weight 24.6 lbs. 11.16 kg Specifications are subject to change without notice.
* Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc.
** Battery life may vary based on temperature, age, and volume usage of product. Trademarks & Licenses ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners. 27 ionaudio.com Manual Version 1.3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-02-11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-02-11
|
||||
1 | Applicant's complete, legal business name |
ION Audio, LLC
|
||||
1 | FCC Registration Number (FRN) |
0024611568
|
||||
1 | Physical Address |
200 Scenic View Drive, Cumberland
|
||||
1 |
CUMBERLAND, Rhode Island 02864
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB3E
|
||||
1 | Equipment Product Code |
IPA73P
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** L********
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
j******@ionaudio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/28/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Rechargeable Wireless Speaker System with Party Lights | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co.,Ltd
|
||||
1 | Name |
J****** Y****
|
||||
1 | Telephone Number |
086-0******** Extension:
|
||||
1 |
y******@163.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0032500 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC