-procom OM 8 ip CUSTOMER SERVICE:
Text us: +1 800-674-9229 JUST SCAN THE QR CODE WITH YOUR IPHONE OR ANDROID CAMERA TO GETIN TOUCH WITH US plete) meee COLLAR INSTRUCTION MANUAL
[ll IMPORTANT SAFETY INFORMATION WARNING:
Not for agaressive dogs, DO NOT USE this product if your dog is aggressive or prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dos, Consult your veterinarian or certified trainer. The Remote Training Collar MUST be used on healthy dogs only. We recommend you to take your dog to a veterinarian before using the collar if he is notin 200d health. CAUTION:
ISK OF INJURY. Please, read the following instructions carefully in this guide. Proper collar fits important. Because a loose collar may cause inconsistent performance. A collar worn for too long or made too tight on the pet's neck may cause skin damage ranging from redness to pressure ulcers (commonly known as bedsores),
{A Avoid leaving the collar on the dog for more than 12 hours per day A. Try to reposition the collar on the pet's neck every 1 to 2hours A. Check the ft to prevent excessive pressure, Follow the instructions in this manual A Never contact a lead to the electronic collar It will cause excessive pressure on the contacts
{A Wash the dog's neck area and the contacts ofthe collar
\wookly with a damp cloth A Examine the contact area dally for signs of rash or Bia rash or sore is found, stop using the collar until the skin has healed A If the condition persists beyond 48 hours, see your veterinarian These steps wil help keeping your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts Some pets are sensitive to contact pressure. You may find after some time that your petis very tolerant of the collar. If 0, you may relax some of these precautions. itis important to continue daily checks of the contact area, If redness or sores are found. stop using Until the skin has fully healed ll REMOTE _ T chorsing Port Tips Press @ Channel button for 3 seconds to turn on, the remote
+ Press @J Channel button far 5 seconds to turn off the remote
+ It will tur off the LED display in 2 minutes automatically IF there is no pressing Press the button for 2 seconds to turn on the receiver with a vibration and press and hole for 3s to turn off the receiver y with a beep, Charging Port: Fully charge m will take around 2-3 hours. LED Indicator:
LED Said LED Blinking System Running Pairing Mode
/ Fully Charged, Charging / Low Battery Pairing and Test the remote and Receiver (important)
* when the receiver is low Power, the LED Incicator wil Turn on the Remote Control fast Blinc and turn off the Receiver.
+ When the system is working of fully charged, the LED 2. ress and Hold the receiver Indicator will be solid Power On/Of Button @ at Teast 5 seconds, then you will hear @ Seep and the Red LED te fiasning. ou will have. 3 Seconds 9 pair the devies) Z 3 Brest the Vioration button within S seconds fo finish the BBR SETUP EROCEDURE: pairing then you will hear a Beep.
+ The receiver will go to Power Saving mode after 30 seconds ifno movement or transmitted signalis detected 1. Charge the remote and receiver To test ifthe Remote and Receiver are paired, press the Beep button, @ the Receiver will beep every time you press the beep button: IMthere is no Beep, then repeat the pairing process, Tips:
You can choose Channel 1or Channel 2 to pair the Remote and Device. The system can pair 2 Receivers at the same time. Ifyou can not pair the device successfully, it may be caused by signal interference. Please, change to another location. The Remote will go to Sleep Mode if you don't Use it for 2 minutes or more, and the Receiver will go 1 to Power Saving Mode if there Is no movement for $0 seconds and the LED will be turned off. Any movement fon the Receiver wil activate the collar and any button you press on the Remote will activate the Remote. state shock Te Secure the ncuded test Bulb Kon the Receker ColrsConigat Potts Press the Shock baton @ to tet the Shock Function
+ tease tly charge the Remote and Receiver before you use + Te tst Sub wl fat up inleting the wrosuets that the Stade Shock Stele
+ remote Fully charged, The Red LED wil become sold works Thoigher the Static shock Levels the btghtr the Hoh shold be ration Test ress tre bration button to test the Vibration Function 1 The Recewver Cola wil vine eating tha the Viration Function wos
+ Receiver: Fully charged, the Red LEO will become solid (The LED will be blinking f Low Power)
+ The charging time takes around 2 to S hours. LED indicator on the Remote will be solid and LED indicator on receiver will be blinking when charging Tips:
* When the receiver i low power, the LED Indicator will fast Blink
+ When the system is working or fully charged, the LED Indicator willbe solid
+ The receiver will go to Power Saving mode after 30 seconds ifno movement or transmitted signalis detected lll SETUP PROCEDURE:
Charge the remote and receiver
+ Please, fully charge t the products Remote and Receiver before you use
+ Romote: Fully charged, The Red LED will become solid
+ Receiver: Fully charged, the Red LED will become solid The LED wil be blinking f Low Power)
+ The charging time takes around 2 to 3 hours. LED indicator on the Remate will be solid and LED indicator on receiver will blinking when charging 2. Pairing and Test the remote and Receiver (important) 1. Tura on the Remote Control and turn off the Receiver. 2.Press and Hold the Power On/Off But hear a Beer is flashing. (You will have 5 seconds to pair the device), 53. Press the Vibration button within seconds to finish the pairing then you will hear a Beer:
To test ithe Remote and Receiver are paired, press the Beep button, () the Receiver wil beep every time you press the beep button. ifthero is no Beep, then repeat the pai an choose Channel } of Channel 2 to pair the Remote land Device. The system can pair 2 Receivers at the same time. If you can nat pair the device successfully it may De used by signal interference. Please, change to anather location. The Remote will go to Sleep Mode if you don't Use it for 2 minutes or more, and the Receiver will 3 to Power Saving Mode if there Is no movernent for 30 seconds and the LED will be turned off. Any movement inthe Receiver will activate the collar and any Button you press on the Remote will activate the Remote, Static shock Test crete eled test Bulb Kit on '
ie Rocser lars Comet Pons
+ Bes ihe Shock button @9 0 tat theshonneurcton 2" @
+ Theos Bub Wt ght up necting Tan ite seus See en Tae lohor the Stats Shock Love theoreti shod Virtion et reste Viration button @to tes the vitation Function 1 Three Calor ll ute cates ta he breton Fieeton wens FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with pat 15 of the FCC mules. Operation is subject to the following two conditions (1) this device may not ease harm interfeence, and (2) this device maist accept any interferencereceved including intaflxencethat may chuse undesired operation