R M E D E T I S P S Y S M E T I L B L U B E T S Y S B M L E T U S Y B S S p i d e r B ul b l i t e B ul b TECHNOLOGIE DISPONIBLE SUR LES SYSTMES CI-DESSUS TECHNOLOGY AVAILABLE ON THE ABOVE SYSTEMS K SPIDER PEBBLE1-2 1 Franais PRSENTATION DU PRODUIT DESCRIPTION DU PRODUIT BOUTON COMMANDE BOUTON SYNCHRONISATION 2 3 0 C R 2 CR2032 MODE DUTILISATION ALLUMER ET TEINDRE LA LUMIRE CHOISIR UNE COULEUR OU UN MODE (AMBIANCE)
BOUTON COMMANDE Un appui court sur ce bouton allume, change la couleur ou le mode puis teint le luminaire. RAINBOW Dfilement de toutes les couleurs CANDLE BLEU Effet bougie - scintillement des LEDs CANDLE Effet bougie - scintillement des LEDs OFF CYCLE DE 7 COULEURS ET 3 MODES SYNCHRONISER LES LUMINAIRES La nouvelle Pebble vous permet de synchroniser les luminaires Smart&Green. 20 m
BOUTON COMMANDE 3 1 0 2
2 1
9 0 G
S 2 e b b e P l 2
Un appui court sur ce bouton rpte la dernire commande. BOUTON SYNCHRONISATION INFORMATIONS TECHNIQUES CARACTRISTIQUES TECHNIQUES Pile : 3V Lithium CR2032 Dure de vie (pile) : 2 ans (usage standard) Frquence radio : 433 MHz Porte radio : 20m maximum (en porte directe) Rsistance aux chocs et UV Protection : IP55 (peut tre utilise sous la pluie) Temprature dutilisation conseille : 0 40C Garantie du produit : 1an TLECOMMANDE-
RADIO RSISTANT AUX CLABOUSSURES PRCAUTIONS DUTILISATION Lisez attentivement ce mode demploi avant dutiliser lappareil et conservez-le pour usage ultrieur. Utiliser la tlcommande conformment aux instructions donnes dans cette notice, faute de quoi aucune garantie ne pourra tre applique. Ne pas plonger dans leau Ne pas lexposer longuement au soleil Ne pas lexposer au feu La garder hors de porte des jeunes enfants En cas de non utilisation prolonges, otez la pile de la tlcommande En cas de remplacement, utiliser la rfrence de pile fournie en fin de notice Ne pas tenter de la dmonter
> Pour toute questions relatives au bon fonctionnement de ce produit, contactez votre point de vente. QUE FAIRE EN CAS DE PROBLMES ?
VOUS NE PARVENEZ PAS CONTRLER UN (OU PLUSIEURS) LUMINAIRES. Vrifiez quil sagit bien dun produit compatible avec la technologie Pebble. Commencez par recharger votre ampoule ou systme lumineux si ce nest dj fait. Lors de la premire utilisation, vous devez appuyer une premire fois sur un bouton de lampoule pour activer la transmission radio. Pour une commande distance, placez-vous porte radio. Si le problme persite, reportez-vous la notice du luminaire pour lteindre et le rallumer, voire pour restaurer sa configuration dorigine. CONFORMIT A LA REGLEMENTATION Dans lunion Europenne (conformment la directive DEEE 2002/96/CE), voire aussi dautres rgions, vous avez lobligation, en fin de vie, de retourner ce produit un point de collecte pour recyclage. En effet, ce produit nest pas un dchet mnager ordinaire, grer ainsi sa fin de vie nous permet de prserver notre environnement et limiter lutilisation de nos ressources naturelles. Pour toute information complmentaire, contactez Smart & Green. IPW Europe dclare le prsent produit conforme aux directives europennes suivantes : RTTE (1999/5/CE), LVD (2006/95/CE), ROHS (2011/65/EU), EMC (2004/108/CE) and Battery (2006/66/EC). La dclaration de conformit correspondante est disponible sur notre site internet (www.smartandgreen.eu). 3 English PRODUCT PRESENTATION PRODUCT DESCRIPTION CONTROL BUTTON SYNCHRONIZATION BUTTON 2 3 0 C R 2 CR2032
SYNCHRONIZATION BUTTON Briefly press this button to repeat the previous command. TECHNICAL INFORMATION TECHNICAL CHARACTERISTICS OPERATING MODES SWITCHING ON/OFF SELECTING A COLOUR MODE (AMBIENCE) RADIO REMOTE CONTROL SPLASH RESISTANT PRECAUTIONS Battery: 3V Lithium CR2032 Life (battery): 2 ans (usage standard) Radio frequency: 433 MHz Radio range: 20m maximum (en porte directe) Shock and UV resistant Protection: IP44 (can be used in rain) Recommended operating temperature: 0 to 40C Product guarantee: 1 year
CONTROL BUTTON Briely press this button to turn the light on in white light, or changes the light color or mode then switch off the light. RAINBOW Scrolls through all the colours CANDLE BLUE Candle effect - LEDs flicker CANDLE Candle effect - LEDs flicker OFF 7-COLOUR CYCLE AND 3 MODES Carefully read and save these instructions before using the product. Use the remote control in accordance with the instructions given in this user manual. Failure to do so will invalidate your guarantee.
> For any questions relating to the proper functioning of this product, please contact your point of sale. Do not immerse in water. Do not subject to prolonged exposure to the sun. Do not expose to fire. Keep out of reach of children. When not in use for an extended period of time, remove the battery from the remote control. When replacing the battery, use the battery reference provided at the end of this user manual. Do not attempt to dismantle. TROUBLESHOOTING GUIDE SYNCHRONISING LIGHTS The new Pebble remote control easily synchronizes your Smart & Green products. 20 m YOU ARE UNABLE TO CONTROL ONE (OR SEVERAL) LIGHT(S). Verify that your product is indeed compatible with the new Pebble remote control. Start by recharging your light module or system if it is not already done. When using for the first time, you must first press one of the bulbs buttons to activate the radio transmission. For remote control, stand within radio range. If the problem persists, refer to the light user manual to switch it off and on, or restore its original settings.
CONTROL BUTTON 3 1 0 2
2 1
2 0 G
S 2 e b b e P l 4 COMPLIANCE In the European Union (in accordance with Directive DEEE 2002/96/EC), and also in other regions, you must return this product to a recycling collection point at the end of its life. As this product is not ordinary household waste, managing its end of life helps us protect our environment and limit the use of our natural resources. For further information, please contact Smart & Green. IPW Europe declares that this product complies with the following European directives: R&TTE (1999/5/EC), LVD (2006/95/EC), RoHS (2011/65/EU), EMC (2004/108/EC) and Battery (2006/66/EC). The corresponding Declaration of Conformity can be viewed on our website (www.smartandgreen.eu). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 5 operation. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. www.smartandgreen.eu 11, rue de lAbb Vincent - Z.I. Les Vouillands - 38600 Fontaine - France Tel : + 33 4 76 09 69 96 - info@smartandgreen.eu