all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 392.52 KiB | January 09 2017 | |||
1 | Cover Letter(s) | January 09 2017 | ||||||
1 | External Photos | January 09 2017 | ||||||
1 | ID Label/Location Info | January 09 2017 | ||||||
1 | Cover Letter(s) | January 09 2017 | ||||||
1 | Internal Photos | January 09 2017 | ||||||
1 | Attestation Statements | January 09 2017 | ||||||
1 | Cover Letter(s) | January 09 2017 | ||||||
1 | Cover Letter(s) | January 09 2017 | ||||||
1 | RF Exposure Info | January 09 2017 | ||||||
1 | RF Exposure Info | January 09 2017 | ||||||
1 | RF Exposure Info | January 09 2017 | ||||||
1 | Test Report | January 09 2017 |
1 | User Manual | Users Manual | 392.52 KiB | January 09 2017 |
DMR Digital Two-Way Radio DM-580 Preface Thanks for your favor in product.This manual provides guidance for you to quickly know how to use this product. To avoid bodily injury or property loss caused by misoperations. please carefully read this manual before using our product. This manual is applicable to the following product: DM-580. Welcome to use iradio digital two-way radio. Main Function UHF:400-470MHz 1000 Channels 250 Zones Message Function CTCSS/DCS VOX Function DTMF Function High/Low power Selection Scan Function Low Power Alert Emergency Alarm Function Digital Encryption Side Key P1/P2 Can be Customized Single CallGroup CallAll Call H 4A403.325 Zonel VOX CH 1 MENU BACK 1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS DEF MNO WXYZ 3 6 9
#
CONTENTS Section 1..............................................................................................................01-02 Attention....................................................................................................................01 Unpacking and device checking.................................................................................02 Section 2..............................................................................................................03-10 Familiar with the radio...........................................................................................04-05 Preparation before using.......................................................................................06-10 Charging the battery.......................................................................................... 06 Attaching the battery..........................................................................................07 Attaching the antenna........................................................................................08 Attaching the belt clip........................................................................................09 Attaching the audio accessory/programming cable..........................................10 Section 3..............................................................................................................11-15 Basic operations........................................................................................................12 Turning the radio on/off.....................................................................................12 Adjusting the volume........................................................................................12 Selecting a zone................................................................................................12 Channelsusers IDtalk group ID selection...................................................12 Call......................................................................................................................12-15 Private Call.........................................................................................................13 Group Call..........................................................................................................14 All Call................................................................................................................15 Section 4..............................................................................................................16-48 Emergency Alarm Function and operations............................................................17-20 Emergency type.................................................................................................17 Emergency Mode...............................................................................................18 Operation of sending emergency alarm............................................................19 Operation of receiving emergency alarm..........................................................19 Operation of replying emergency alarm............................................................20 Menu Functions and Operations............................................................................21-30 Character input..................................................................................................21 English character mode.....................................................................................21 Radio Detection.................................................................................................22 Send a Radio Detection.....................................................................................22 Setting contacts person....................................................................................23 Call recording function......................................................................................23 Missed call screen.............................................................................................23 Store/Delete Missed,Answered,Outgoing list name/ID.....................................23 Call prompt operation.......................................................................................24 Receiving & Confirm call prompt......................................................................24 Message function..............................................................................................24 Encryption.................................................................................................................25 Basci encryption................................................................................................25 DTMF..................................................................................................................26 Make a DTMF call......................................................................................................26 Anti-Theft..................................................................................................................26 Kill Function...............................................................................................................26 Revival Function........................................................................................................27 Scanning list ........................................................................................................27-30 Check the Members of Scanning List..........................................................................28 Scanning indicator and method..................................................................................28 There are two scaning methods..................................................................................29 Start/stop Scanning....................................................................................................29 Reply ........................................................................................................................30 Utilities.................................................................................................................31-41 Radio Settings...........................................................................................................31 Talk around...............................................................................................................32 Tones/Alerts..............................................................................................................33 All Tones...................................................................................................................33 Keypad Tones............................................................................................................34 Power Level Setting..............................................................................................34-35 Back light...................................................................................................................35 Squelch.....................................................................................................................36 Intro Screen...............................................................................................................37 Keypad Lock..............................................................................................................37 Language..................................................................................................................38 LED indicator light.....................................................................................................38 VOX..........................................................................................................................39 Password Lock..........................................................................................................40 Clock....................................................................................................................41-42 Time..........................................................................................................................41 Date...........................................................................................................................41 Radio Info.............................................................................................................42-43 My number................................................................................................................42 Versions....................................................................................................................43 Program Radio.....................................................................................................43-48 RX Frequency............................................................................................................44 TX Frequency ......................................................................................................44-45 Channel Name...........................................................................................................45 TOT...........................................................................................................................46 CTC/DCS..................................................................................................................46 Encode.................................................................................................................46-47 Decode......................................................................................................................47 Color code............................................................................................................47-48 Repeater Slot............................................................................................................48 Technical Parameter...........................................................................................49-51 General...............................................................................................................49 Receiving............................................................................................................50 Transmitting........................................................................................................51 Guarantee.................................................................................................................52 User's Manual Attention Unpacking and device checking Preparation before using ATTENTION Please read the following brief instructions, if you non-compliance with these rules may cause danger or violate the law. 1.Obey the government regulation before using this radio, improper operation may violate the law and will be punished. 2.Turn off the radio before entering flammable or explosive areas. 3.Do not charge or change the battery in flammable or explosive areas. 4.Do not use radio which antenna is damaged, touching of the damaged antenna will cause heat injury. 5.Do not attempt to open the radio: the maintenance work must be done by technical expert only. 6.To avoid troubles caused by electromagnetic interference or electromagnetic compatibility, please turn off the radio in places where have the banner Do not use wireless equipment, Such as hospital and other health-care areas. 7.In a car with a safety airbag, do not put the radio within the scope of the airbag deployed. 8.Do not put the radio under the direct sunshine or hot areas. 9.When you transmit the signaling, please keep away from radio's antenna for 3.1CM at least. 10. If you smell radio appears fumes or burning, please shut off its power immediately and contact with your local dealer. Unpacking and device checking Before using:
1.Please check whether the packing box is damaged or not. 2.Please unpack packing box carefully,and confirm the following list of items are in the box.If any items are missing or have been damaged during shipment,please contact dealers immediately. Supplied accessories Antenna (1) Li-ion battery (1) Belt Clip (1) Charger (1) radio C E R T I F I C AT I O N Verification (1) User's Manual (1) Note The antenna may vary with different frequency bands.And the frequency band is marked on the label of antenna.If no,please refer to the label on the radio unit for frequency band information. 01 02 User's Manual Familiar with the radio Familiar with the radio Preparation before using Basic operations Antenna with threaded head. for transmitting and receiving LED indicator light The indicator light turns red when transmit, turns green when receive. It blinks red when the battery capacity is low, and blinks green when scanning. Speaker sound output H 4A403.325 Zonel VOX CH 1 P1 MENU BACK 1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS DEF MNO WXYZ 3 6 9
#
Power/volume knob To power on/off and adjust the volume. Rotate it clockwise, a "click" sound is heard and a "Du" tone prompts the radio power on, continue to rotate it to adjust the volume. Rotate it counter-
clockwise until a "click" sound is heard, it powers off. Microphone sound input P2 04 Preparation before using Charging the battery Use only the charger and battery specified by charger, LED can indicate the charging process. Charge diagram PTT switch Side key Mic/speaker jack/
programming port Used to connect headset or external programming cable. Programmable via PC programming software. Li ion battery For charging the radio The battery release button Notice: Either Long-press or Short-press of Side-key /P1-key /P2-key can be set by program software. 1 2 3 Procedures 1.Connect the power adapter to AC socket.See arrow 1. 2.Plug the power adapter into the rear jack of the charger.See arrow 2. 3.Place the radio with the battery attached,into the charger.See arrow 3. LED Indicator Status Red Charging Green Fully charged 05 06 Attaching the battery 1)Slide the battery into the radio`s slot.(Arrow 1) 2)Buckle the battery until the battery and radio were tightly fixed. (Arrow2) Attaching the antenna 1)Turn the antenna clockwise to fasten it. 2)To remove the antenna,rotate it counter-clockwise. 1 2 3)To remove the battery,turn off the radio first.Then release the lock catch to unlock the battery. (Arrow2) 2 1 H 4A403.325 Zonel VOX CH 1 H 4A403.325 Zonel VOX CH 1 MENU BACK MENU BACK 1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS DEF MNO WXYZ 3 6 9
#
1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS DEF MNO WXYZ 3 6 9
#
07 08 Attaching the belt clip 1)Using two screws align the screw holes on the belt clip with those on the radio`s body,and then tighten this two screws.(Arrow 1) 2)Loosen the screw set to remove the belt clip.(Arrow 2) Attaching the audio accessory/programming cable 1Using screw-driver to release the screw. 2Align the plug with the accessory jack. 3Tighten the screw on the plug. 2 1 09 MENU 1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS BACK DEF MNO WXYZ 3 6 9
#
MENU 1 4 7 GHI PQRS DEL 2 5 8 0 ABC JKL TUV CAPS BACK DEF MNO WXYZ 3 6 9
#
To remove accessories,loosen the screw. Caution:When you are using as external accessory,waterproof performance of the radio may get affected. 10 User's Manual Basic operations Private CallGroup CallAll Call Basic operations Turning the radio on/off Rotate the radio on-off/volume control knob,clockwise/counter-clockwise until a click is heard to turn the radio on/off. Adjusting the volume After turning the radio on,rotate the radio on-off/volume control knob clockwise to increase the call volume,or counter-clockwise to decrease it. Selecting a zone A zone is a group of channels exhibiting the same property,and is programmed by your dealer. The radio supports up to 64 zones.each with a maximum of 16 channels.You may select a zone through any of the following methods:
1.Press key to enter menu,go to the menuZone, and use the [ or ] key to select your MENU desired zone. 2.You may quickly toggle to your desired zone by pressing the key to confirm. MENU Channelsusers IDtalk group ID selection Select Channelsusers IDtalk group ID by pressing [ or ] key. Call To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to 5 centimeters away from your mouth. 12 Private call Transmitting a private call Transmitting a private call through any of the following methods:
7UDQVPLWWLQJDFDOOWRWKHSUHVHWFRQWDFW In the home screen,hold down the [PTT] key to transmit a private call to the private call contact preset for the current channel. Note: Your dealer may preset a contact for each digital channel. The preset contact could be a private call contact,a group call contact or an all call contact. 1)Transmitting a call through contact list or call logs
3UHVV>@WKHQJRWR&RQWDFWV&RQWDFWV/LVWRUJRWR&DOO/RJDQGDFFHVVWKH0LVVHG
Answered/Outgoing list. 3)Use the [ or ] key to select the private call contact you want to call. MENU Receiving and responding to a private call 1)When a private call is received,the LED indicator light for green light. 2)In the home screen,top line will display RSSI etc status icon,In the display area below, the first line shows private call + User`s name/ID,next line shows a private call icon. 3)You may hold down the [ PTT ] key within the preset time period to call back.If you do not respond to a received private call, your radio`s Missed Call Log will display the missed calling number. Group Call Transmitting a group call You may transmit a group call through any of the following methods. 1.Transmitting a call to the preset contact In the home screen,hold down the [ PTT ] key to transmit a group call to the group call contact preset for the current channel. 2.Transmitting a call through contact list or call logs
3UHVV>@WKHQJRWR&RQWDFWV&RQWDFWV/LVWRUJRWR&DOO/RJDQGDFFHVVWKH0LVVHG
Answered/Outgoing list. 2)Use the [ or ] key to select the group call contact you want to call. 3)Hold down the [ PTT ]key to transmit the group call. MENU Receiving and responding to a group call 1)When a group call is received,the LED indicator light for green light. 2)In the home screen,top line will display RSSI etc status icon,In the display area below, the first line shows group call + User`s name/ID,next line shows a group call icon. 4)You may hold down the [ PTT ] key within the preset time period to call back. If you do not respond to a received group call,your radio`s Missed Call Log will display the missed calling number. 13 14 All Call Transmitting an all call Method are the same as those in transmitting a group call. Note: You can transmit an all call only when it is enabled by your dealer. And you cannot respond to an all call. Calls on analog channels To transmit on an analog channel, hold down the [ PTT ] key and speak into the microphone. To receive, release the [ PTT ] key. User's Manual Emergency Alarm Function and Operations Menu Functions and Operations 15 Description Emergency Alarm Function In case of an emergency, you can use the feature to ask for help from your companion or control center.The emergency process has the highest priority.You can make emergency operation even when your radio is transmitting or receiving. To enable the feature on a channel.an emergency system must be assigned to the channel via the programming software.In addition,the system name,emergency type and emergency mode are settable via the programming software. Emergency type For each emergency mode,there are four emergency types available.You can select one of them via the programming software. Emergency Type Description Emergency Mode Emergency Mode Emergency Alarm Emergency Alarm with Call Disabled Regular Silent Silent with Voice 17 Turn off the function of emergency alarm In emergency mode,the radio will give audible and visible indication. In emergency mode,the radio won`t give any audible or visible indication. In emergency mode,the radio won`t give any audible or visible indication,but will receive voice from the companion or control center automatically. Emergency Alarm with Voice to Follow In this mode,you can send alarm information to your companion or control center by pressing the programmed emergency key, but you cannot talk with them. In this mode,you can send alarm information by pressing the programmed emergency key, then press [PTT ] and speak into the microphone, allowing your voice and background noise to be transmitted,release the [ PTT ] key to receiving. In this mode,press the programmed emergency key to go to the revert channel, then you can speak into the microphone, allowing your voice and background noise to be transmitted automatically(You do not need to hold down the [PTT] key). 18 Operation of replying emergency alarm 1.Press any key to stop all sounds of receiving an emergency alarm. 2.Hold the radio approximately 2.5 to 5 centimeters away from your mouth. If you turn on the function of Channel free indication tone, when you release [ PTT ] key, you will heard a short prompt tone,indicates that this channel can use now. 3.Press [PTT] to start a call,LED indicator light flashing red color.The radio are on the emergency alarm mode. 4.Release the [PTT] to receiving the call,when the sender part reply,LED indicator light flashing green color. You will see the group call iconTalk Group ID and sender part ID. 5.After finish the call, short press[ ]key, then press preset key to turn off the alarm. 6.Radio back to home screen. MENU Operation of sending emergency alarm 1.Press preset key to turn on the emergency alarm function. 2.Home screen will display 3.While receiving confirmation of emergency alarm, it will prompt Emergency call tone and the LED indicator light will flashing green color. Emergency Alarm 1)The screen display emergency alarm success. or if the radio didn`t received any confirmation of emergency alarm and used all the number of replication,will send a prompt tone, then display emergency alarm failure on screen. 2)The radio exit emergency alarm mode,and back to the home screen. Emergency Alarm with Call Refer to the description of Emergency Alarm with Call. Emergency Alarm with Voice to Follow Refer to the description of Emergency Alarm with Voice to Follow. Operation of receiving emergency alarm 1.While you receiving emergency alarm,the alarm and number of receiving will interchanging display with sender`s name and ID. 2.Sending one prompt tone and LED indicator light flashing red color. 3.If activated,radio will confirm the emergency alarm automatically. While you receiving the emergency alarm,the screen will display the prompt of emergency alarm,meanwhile you can not receive other prompt or other calling,until you exit the emergency alarm mode. Caution: Short press[ ]key, then press preset key to turn off the alarm. MENU 19 20 Menu Functions and Operations Character input You can use 34 alphanumeric keyboard to To access the radio`s function. While using keyboard to input user`s name or message,have three mode to select:
1.English character mode. 2.Chinese input method mode. 3.Digital input mode While input ID by keyboard,only can using digital input mode. English character mode Some characters need to press a key several times,The following table shows the number of times you need to press a key to get the desired character. Button 1 2 3 4 5 6 7 8 9 0
*
#
21
:
J
#
12 13
*
9 10 11
! @ & ' % -
A 3 4 5 6 7 8
,
?
2 B C c F 3 D E f 4 G H I i l 5 L o 6 M N O r v y 2 1
. 1 b a e d h g j k m n p q t u w x Long press 0 to switch the case of character. Backspace,can delete one character or one number. Space key,long press#can switch input method. 7 P Q R S T U V 9 W X s 8 z K Y Z Radio Detection Activation function allows you to determine whether there are other walkie talkies in the system is active,and won`t disturb the walkie talkie users.This feature only suitable for user`s name or ID. MENU MENU MENU MENU MENU Send a Radio Detection 1.Press [ ] to enter menu mode. 2.Go to Call Log, press [ ] to confirm. 3.Go to the user`s name or ID that you required.,then press[ ]to confirm.Or go to Manual dial, MENU press [ ] to confirm,edit ID number then press [ ] key. 4.Go to radio detection,,then press [ ] to confirm. 5.The screen display radio detection: <user`s name or ID>, Indicates that the intercom is being detected.LED indicator light flashing red color. 6.Waiting confirmation. 7.If the target radio is active in the system, you will hear a prompt voice, the screen display target radio have responded. Or if the target radio is not active in the system, you will hear a prompt voice, the screen display target radio didn`t responded. 8.Radio will back to user`s name or ID screen. If you press [ ] while waiting confirmation, you will hear a prompt voice and the radio will terminate all retry and exit the walkie talkie detection mode. MENU 22 Setting contacts person Call log provides Address Book for radio.Each entry corresponds to an user`s name or ID for initiating the call. In addition,Each entry is different according to the settings,consist of group callprivate call and all call.This radio support digital call log. Entries in the Contacts show the following information:
Contacts List
New Contact
Manual Dial Call recording function This radio can record recent Missed, Answered, Outgoing information.You can press [Call Log]
to check and manage the recent call. While check the list, press [PTT] to initiate a call. Missed call screen Whenever you missed the call,it will display a missed calling message in home screen, you can check or check later. Note:If press [PTT] key while check missed call,it will initiate a call with current number. MENU Store/Delete Missed,Answered,Outgoing list name/ID 1.Press [ ] to enter menu mode. 2.Press [ or ] key to Call Log, press [ ] to confirm. 3.Go to the list that you want, press [ ] to choose current name/ID 4.You can select store or delete. 5.If you store the ID, press[ ] ,input it`s name that you want,then press [ ] to confirm. MENU MENU MENU MENU Call prompt operation This function allow you to send a prompt in order to remind receiver call back while free. Note:This function only suitable for user alias/ID,it can sending by Call Log or manual dialing. Receiving & Confirm call prompt The screen will display calling party`s alias/ID when you received a call prompt. 1.You will heard a reduplicated sound,LED indicator light flashing red color. 2.Press and release [PTT] key to confirm call prompt,or press [ ] key then select Ignore to exit call prompt mode. MENU MENU Message function To access this item,press the [ ] key and then select [Message].
New message You can create new text message(144 characters at most)and send it to an individual user or to a talk group.
Quick text Under this option there are some text message(50 entries at most).You can choose to edit and send any entry.
InBox The InBox can save up to 50 received messages.When the InBox is full,the earliest message will be overwritten by the latest one automatically. For each message,you can choose to perform any of these operations:Reply,Forward,View
'HWDLOVDQG'HOHWH7RGHOHWHDOOPHVVDJHVLQWKH,Q%R[VHOHFW0HVVDJH,Q%R['HOHWH$OO
23 24
OutBox The OutBox can save up to 50 sent messages.When the OutBox is full,the earliest message will be overwritten by the latest one automatically. For each of message, you can choose to perform any of these operations: Resend,Forward, 9LHZ'HWDLOVDQG'HOHWH7RGHOHWHDOOPHVVDJHVLQWKH2XW%R[VHOHFW0HVVDJH2XW%R[
Delete All.
Drafts The Drafts can save up to 50 sent messages.When the Drafts is full, the earliest message will be overwritten by the latest one automatically. For each of message, you can choose to perform any of these operations:Send, Save and
'HOHWH7RGHOHWHDOOPHVVDJHVLQWKH'UDIWVVHOHFW0HVVDJH'UDIWV'HOHWH$OO
Encryption If this function is enabled,which is beneficial to preventing other users on the channel by using a number of encryption and decryption technologies for unauthorized eavesdropping.The launch of signaling and user identification is unencrypted. The encryption must be enabled so that the radio can transmit the signal encrypted, even if you dont have to encrypt it when receive it. Basic encryption Two way radio can only be assigned to one of the above encryption types. In order to decrypt the encrypted call or data transmission, the receiver must have the same encryption key with the transmitter.(Apply to Basic encryption) if your radio received the call of different encryption keys or key values and keyID, then you will receive some confused noisy.(Basic encryption) Press the pre-programmed encryption key to turn on or turn off this function. 25 DTMF Dual Tone Multi-Frequency (DTMF) function allows you to operate the radio when there is interference in the radio system Make a DTMF call 1. Press and hold [ PTT ] key. 2. Input the number you need. You can disable DTMF tone by turning off all radio prompt sound. Anti-Theft You can revival or kill any radio in the system. For example, you might want to disable a stolen radio, to prevent thief using it, and enable it when you get it back. Note: Only the radio with kill or revival function can be enable and disable. Kill Function Choose Menu, 1. Press [ ] key to enter the menu MENU 2. Press [ or ] key and choose Contact list, then press [ ] key to confirm, the contacts are grouped by letter. 3. Press [ or ] key to choose the name or ID, and press [ ] key to confirm. Or press [ or ] key to choose Manual Dial, press [ ] twice and input the users name and ID, then press [ ] to confirm. 4. Press [ or ] key to choose Radio disable, and press [ ] key to confirm. 5.The screen displays: radio disable:<users name or ID>, Indicator light turns red. MENU MENU MENU MENU MENU 26 6. Wait for confirmation. 7. The radio will issue a prompt sound when disable the radio successfully, and the screen displays:radio disable successfully. The radio will issue a prompt sound as well when it fail to disable the radio. And the screen displays: Radio disable failed. During the process of disabling the radio, please do not press the [ ] key, otherwise, you wont get the confirmation. MENU MENU MENU Revival Function Use menu function:
1.Press [ ] key to enter the menu. 2.Press [ or ] key and choose Contact list, then press [ ] key to confirm, the contacts are grouped by letter. 3. Press [ or ] key to choose the name or ID, and press [ ] key to confirm. Or Press [ or ] key to choose Manual Dial, press[ ] twice and input the users name and ID, then press [ ] key to confirm. 4. Press [ or ] key to choose Radio enable, and press [ ] key to confirm. 5.The screen displays: radio enable:<users name or ID>, Indicator light turns red. 6. Wait for confirmation. 7.The radio will issue a prompt sound when enable the radio successfully, and the screen displays:radio enable successfully. The radio will issue a prompt sound as well when it fail to enable the radio. And the screen displays: Radio enable failed. During the process of disabling the radio, please do not press the [ ] key,otherwise, you wont get the confirmation. MENU MENU MENU MENU MENU Scanning list Create the scan list and assign them to each channel or each group. There are up to 250 scanning lists available, each list is up to 16 members. Each scanning list supports mixed analogue and digital channels. You can edit the scanning list to add/delete the channel or set up a priority channel. MENU Check the Members of Scanning List 1.Press the [ ] key to enter the menu. 2.Press [ or ] key and choose Scan, then press the [ ] key to confirm. 3.Press [ or ] key to view/edit the scanning list. then press the [ ] key to confirm. 4.Use [ or ] key to check members in scanning list. 5.If the priority channel has been set,the priority icon will appear in the left of user name, it means the user is priority channel or priority channel . If the priority channel is none , then the radio wont display the special icon. In a scanning list, the radio cant have more than one priority channel 1 or priority channel 2. MENU MENU N 1 2 Scanning indicator and method:
When scanning, The radio will scan the current channels in a circular manner throughout the pre-
programmed scanning list to find out which channel has received the signal. LED turns red and flashes, the scanning icon will appear on the screen. When scanning in dual modes,If the radio is in a digital channel while lock in an analogue channel, will switch from digital mode to analogue mode automatically during the call duration.Vice versa. 27 28 There are two scanning methods
0DQXDO6FDQAccording to pre-programmed the scanning key to turn on/off scanning or enter the Menu and choose Scan. When you start to scan, radio will detect all channels/contact groups in the pre-programmed scan list.
$XWR6FDQWhen you select an already activated auto scan channels/contact groups,radio will start to scan from the activated auto scan channel. MENU Start/stop Scanning:
Press the scanning key which has been programmed by software or enter the menu list. 1.Press the [ ] key to enter the menu 2.Press [ or ] key and choose Scan, then press the [ ] key to confirm. 3.If the scanning function is disable, the scanning interface displays TURN ON, or if this function is enable, the scanning interface displays TRUN OFF. 4.Press the [ ] key to confirm. 5. When this function is enable, indicator light turns red and flashes, the scanning icon appears on the screen; when this function is disable, LED indicator light and scanning icon disappear. MENU MENU Reply Radio detect active channel/contact group when scanning, at this time radio will stay in this channel/contact group, which called scanning hold time. Procedure:
1. Hold the radio in a vertical position and keep one to two inches (2.5 to 5.0 cm) distance from the mouth. If the channel idle tone is enable, then you will hear a short prompt sound when release the PTT button after transmitting the signal, which indicates that the channel is idle, and waiting for your response. 2.Press PTT button during the hold time, the LED indicator light turns red. 3.Release PTT button to receive the signal. 4.If you didnt respond the signal during the hold time, the radio will carry on scanning. 29 30 Utilities The utilities shall consist of the following options:
5DGLR6HWWLQJV
5DGLR,QIR
3URJUDP5DGLR Radio Settings
5DGLR6HWWLQJ,QFOXGHV
7DONDURXQG
7RQHV$OHUWV
3RZHU
%DFNOLJKW
6TXHOFK
,QWUR6FUHHQ
.H\SDG/RFN
/DQJXDJH
/(',QGLFDWRU
92;
3DVVZRUG/RFN
&ORFN 31 Talk around This function allows the radio that continues to communicate where the repeater does not work, or the radio is out of the range of repeater while is within the call range of other radios. That called talk around. Press the 1750hz replay echo/talk around key which has been programmed via software, then you can switch these two kinds of modes. Use the menu function 1. Press Key to enter the menu 2.Press [or ] key and choose Utilities, then press key to confirm. 3.Press [or ] key and choose Radio Setting, then press key toconfirm. 4.then press key to confirm. and choose Talk around, then press key to to confirm. 5.If radio is in 1750hz reply mode, you will see selected Turn off, when the radio is in talk around mode, you will see selected Turn on. 6.press key to confirm. 7.The screen displays talk around icon( ), or it will disappear when this function has shut down. 8.The interface will return to the previous options list. Even after shutdown,talk around will be remained. 32 Tones/Alerts Including the following options:
$OO7RQHV
.H\SDG7RQHV All Tones If needed, all tones could be enable or disable.(Except emergency alerts tone). Press All tones key which pre-programmed by software to turn on/off this function. MENU Use the menu function:
1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose radio settings, then press key to confirm. 4.Press [ or ] key and choose tones/alerts,then press key to confirm. 5.Press [ or ] key and choose all tone,then press key to confirm. 6.Press [ ] key to turn on all tones,the screen displaysall tones on Or 6.Press [ ] key to turn off all tones, the screen displays all tones off. MENU MENU MENU Keypad Tones If needed, Keypad tones could be enable or disable. Use the menu function:
1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose radio settings, then press key to confirm. 4.Press [ or ] key and choose tones/alerts,then press key to confirm. 5.Press [ or ] key and choose keypad tones,then press key to confirm. 6.Press [ ] key to turn on, the screen displayskeypad tones on Or press [ ] key to turn off all tones, the screen displays keypad tones off. MENU MENU Power Level Setting There is High/Low power available for each channel. Setting:High power allow you to communicate with other radio with long distance. Low power allows you to communicate with other radio with short distance. Press High/Low power key which has been programmed by software, you can switch high/low power. Use the menu function:
1.Press key to enter the menu 2.Press [or ] key and choose utilities,then press key to confirm. 3.Press [or ] key and choose radio settings, then press key to confirm. 4.Press [or ] key and choose Power,then press key to confirm. 33 34 5.Under the instruction to switch the power. 6.Press key to confirm high/low power 7.The interface will return to the radio setting options. Press <back> to return the main interface. The power level icon will be displayed on the screen. Back light You can turn on or off the screen back light according to your requirement. Press the Back light key which has been programmed by software, to turn on/off this function. MENU Use the menu function:
1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose radio settings, then press key to confirm. 4.Press [ or ] key and choose Back light, then press key to confirm. 5.Press [ ] key to turn on this function when the interface displays Auto On. Or Press [ ] key to turn off this function when the interface displays Turn off. Once you turn off this function, the back light of keypad and screen will be shut down. MENU MENU Squelch Adjust the squelch level to filter useless call with low signal or when theres too much background noise. Setting:The normal value is default value, to filter (useless) call or background strictly. However, a call from a remote location may also be filtered out. Press the squelch level key which has been pre-programmed by software, to switch between Normal and Tight. MENU Use the menu function:
1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose radio settings, then press key to confirm. 4.Press [ or ] key and choose Back light, then press key to confirm. 5.Select Press [ ] Normal or Tight, then press key to Confirm. 6.The interface will return to the option list of radio settings option list. MENU 35 36 MENU Intro Screen If needed, Intro Screen could be enable or disable. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Intro Screen, then press [ ] key to confirm. 4.Press [ or ] key and choose Back light, then press [ ] key to confirm. 5.Press [ ] key to turn on,the screen displaysIntro screen on 6.Press [ ] key to turn off, the screen displays Intro screen off. MENU MENU MENU MENU MENU MENU Keypad Lock You can lock the keypad to prevent the unexpected input. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Intro Screen, then press [ ] key to confirm. 4.Press [ or ] key and choose Keypad Lock, then press [ ] key to confirm. 5.The interface displays keypad locked. Press [ ] , then press [ ] Key to unlock the keypad. 6.The screen displays Keypad unlock and return the main interface. MENU MENU MENU MENU MENU MENU Language Radio supports the following languages:
English
Chinese 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose radio settings, then press [ ] key to confirm. 4.Press [ or ] key and choose Language, then press [ ] key to confirm. 5.Press [ or ] key and choose the language option, then press [ ] key to confirm. 6.The interface displays the selected language and return to the main interface. LED indicator light If needed, LED Indicator could be enable or disable. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose radio settings, then press [ ] key to confirm. 4.Press [ or ] key and choose LED indicator, then press [ ] key to confirm. 5.Press [ ] key to turn on,the screen displaysAll LEDs on Or Press [ ] key to turn off, the screen displays All LEDs off. MENU MENU MENU MENU MENU MENU MENU MENU 37 38 VOX This function allows you to initiate voice-activated hands-free calls on pre-programmed channels. Whenever a microphone with VOX function detect voice, radio will transmit signals automatically with the pre-programmed period of time. Press [PTT] button during the operation will disable VOX function, to re-enale the VOX function, You must do one of the following options:
7XUQRIIDQGUHERRWWKHUDGLR
3HUIRUPWKHIROORZLQJRSHUDWLRQ
Note:Only the radio with these functions can be enable or disable VOX. Press VOX key which has been pre-programmed by software to turn on/off this function. Use the menu function:
1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities, then press [ ] key to confirm. 3.Press [ or ] key and choose radio settings, then press [ ] key to confirm. 4.Press [ or ] key and choose VOX, then press [ ] key to confirm. MENU MENU MENU MENU MENU MENU MENU MENU MENU Password Lock 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose radio settings, then press [ ] key to confirm. 4.Press [ or ] key and choose Password Lock, then press [ ] key to confirm. 5.Input the correct eight-digit number password which has been programmed by software, then press [ ] key to confirm. 6.If the password is incorrect, the interface displays wrong password, if the pass word is correct, the interface will change to the Password lock options list. 7.If the first line displays turn on,press [ ] key to confirm, then you should input the correct password to turn on the radio.If the first line displays turn off, press If the first line displays to confirm, then you can turn on the radio directly while dont have to input the password. 8.Press [ or ] key and choose Change Pwd, then press [ ] key to confirm. 9.Enter 8 digits new password. then press [ ] key to confirm. 10.Confirm the new 8 digits password,hen press [ ] key to confirm. 11.Screen displays that Password changed. Note:The password should be 8 digits number. MENU MENU MENU MENU 39 40 Clock Clock settings are divided into:
7LPH
'DWH MENU Time 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose radio settings, then press [ ] key to confirm. 4.Press [ or ] key and choose Clock, then press [ ] key to confirm. 5.Press [ or ] key and choose time, then press [ ] key to confirm. 6.Press [ ] key to enter time setting interface 7.Press [ or ] key to move right and left and choose the number you want to change, the number turns to reverse video text, input the right number via keypad. 8.The screen display time saved after pressing key to confirm. MENU MENU MENU MENU MENU Date 1.Press key to enter the menu 2.Press [or ] key and choose utilities,then press key to confirm. 3.Press [or ] key and choose radio settings, then press key to confirm. 41 4.Press [or ] key and choose Clock, then press key to confirm. 5.Press [or ] key and choose date, then press key to confirm. 6.Press key to enter date setting interface 7.Press [or ] key to move right and left and choose the number you want to change, the number turns to reverse video text, input the right number via keypad. 8.The screen display date saved after pressing key to confirm.i Radio Info The Radio Info contains the following parts:
0\1XPEHU
5DGLR9HUVLRQV)LUPZDUHV9HUDQG&RGHSOXV9HU
Note: Press Back key to return the previous interface. MENU My Number 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose radio information, then press [ ] key to confirm. 4.Press [ or ] key and choose My Number, then press [ ] key to confirm. 5.The radios ID and name will be displayed on the interface. MENU MENU MENU 42 MENU MENU MENU MENU Versions Display radio firmware version. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose radio information, then press [ ] key to confirm. 4.Press [ or ] key and choose Firmware Ver./CP Ver., then press [ ] key to confirm. 5.The radios version will be displayed on the interface. Program Radio This Option allows you to edit the channel content. The editable channel content contains the following options:
5;)UHTXHQF\
7;)UHTXHQF\
&KDQQHO1DPH
7LPHRXW7LPHU
&7&'&6
&RORU&RGH
5HSHDWHU6ORW 43 MENU MENU MENU MENU RX Frequency 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Program Radio, then press [ ] key to confirm. 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose RX Frequency, then press [ ] key to confirm. 6.The screen displays the current RX frequency,then press [ ] key to confirm. 7.Press [ or ] key to move right and left and choose the number you want to change, the number turns to reverse video text, input the right number via keypad. 8.Press key to save the new frequency, the screen display RX frequency saved. Note: Editing frequency will be limited within the frequency range setted by programming software, If the frequency is less than the minimum of the frequency range, the radio will take the minimal value, conversely, when it greater than the maximum, take the maximal value of the frequency range. MENU MENU MENU TX Frequency 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ]key and choose Program Radio,then press [ ]key to confirm. 44 MENU MENU MENU MENU MENU MENU 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose TX Frequency, then press [ ] key to confirm. 6.The screen displays the current TX frequency,then press [ ] key to confirm. 7.Press [ or ] key to move right and left and choose the number you want to change, the number turns to reverse video text, input the right number via keypad. 8.Press [ ] key to save the new frequency, the screen display TX frequency saved. Note:Editing frequency will be limited within the frequency range setted by programming software, If the frequency is less than the minimum of the frequency range, the radio will take the minimal value, conversely, when it greater than the maximum, take the maximal value of the frequency range. Channel Name 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Program Radio, then press [ ] key to confirm. 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose Channel Name, then press [ ] key to confirm. 6.The screen displays the current channel name, then press [ ] key to change the letter, number, Chinese input method, the same as text editing. 7.The screen displays Channel name saved after pressing [ ] key. MENU MENU MENU MENU MENU MENU
#1 MENU TOT 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Program Radio, then press [ ] key to confirm. 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose TOT, then press [ ] key to confirm. 6.The screen displays infinite, 15S,30S.....555S(Increasing 15S each time),Press [ ]
key to choose the option you want.then The interface displays TOT saved after pressing [ ] key. MENU MENU MENU MENU MENU MENU CTC/DCS CTCSS/DCS is available only in analogue channel, it contains:
CTCSS/DCS encoding
CTCSS/DCS decoding MENU Encode 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Program Radio, then press[ ]key to confirm. 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose QT/DQT Code, then press [ ] key to confirm. MENU MENU MENU MENU 45 46 MENU MENU MENU MENU MENU 6.Theres empty option and all kinds encoding value,press [ or ] key and choose Empty, press [ ] key confirm. Then the CTCSS/DCS has been shut down. press
[ or ] key and choose the codes, press [ ] key to confirm. The interface displays QT/DQT encode saved. Decode 1.Press [ ] key to enter the menu 2.Press[ or ] key and choose utilities,then press [ ] key to confirm. 3.Press[ or ] key and choose Program Radio, then press [ ] key to confirm. 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose QT/DQT Code, then press [ ] key to confirm. 6.Theres empty option and all kinds decoding value,press[ or ] key and choose Empty, press [ ] key confirm. Then the CTCSS/DCS has been shut down. press
[ or ] key and choose the codes, press [ ] key to confirm. The interface displays QT/DQT decode saved. Color Code Color Code is available only in digital mode. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press [ ] key to confirm. 3.Press [ or ] key and choose Program Radio, then press [ ] key to confirm. MENU MENU MENU MENU MENU MENU MENU MENU 4.Input the correct password which has been programmed already by software.then press [ ] key to confirm. 5.Press [ or ] key and choose Color Code, then press [ ] key to confirm. 6.Input the number and press [ ] key to confirm. MENU MENU MENU Repeater Slot Repeater Slot is available only in digital channels. 1.Press [ ] key to enter the menu 2.Press [ or ] key and choose utilities,then press key to confirm. 3.Press [ or ] key and choose Program Radio, then press [ ] key to confirm. 4.Input the correct password which has been programmed already by software. then press [ ] key to confirm. 5.Press [ or ] key and choose Repeater Slot, then press [ ] key to confirm. 6.Press [ or ] key and choose repeater slot, then press [ ] key to confirm.The interface displays Repeater slot saved. MENU MENU MENU MENU 47 48 Technical Parameter General Frequency Range UHF:400-470MHz Channel Storage 1000 channels Channel Spacing Working Voltage Battery Type Working Temperature Store Temperature Antenna Impedance Dimension 12.5KHz 7.4V DC Polymer lithium battery
-30~+60
-40~+85
130*58*35mm Receiving Analogue Sensibility 0.22uV/-120dBm(20dB SINDA) Digital Sensibility 0.282uV/-118dBm(BER 5%) Co-channel Rejection
G%
Adjacent Channel Selectivity TIA603C:65Db ETSI:60dB Spurious Response TIA603C:75Db ETSI:70dB Audio Power Audio Distortion Audio Response Weight 1W
Type 1dB~-3dB 300g 49 50 Transmitting Output power Frequency Stability High:5W Low:1W 1ppm Adjacent channel power
G%
Idle Time Slot Power FM Modulation Mode 7'0$G%P 12.5KHz@11K0F3E Modulation maximum deviation 2.5KHz@12.5KHz Nonactive slot power
-57dBm Digital protocol Vocoder type ETSI TS 102 361-1-2-3 AMBE+2TM Modulation BER(Bit Error Rate)
4FSK digital mode 7K60F1D, 7K60F1E Guarantee Model Number:
Serial Number:
Purchase Date:
Dealer: Telephone:
User`s Name: Telephone:
Address: Post Code:
l P e a s e c u t l a o n g w i t h t i h s l i n e Remarks:
1.This guarantee card to be kept by user,we will not re offer if lost. 2.This guarantee card should be filled by dealer,otherwise it`s invalid. 3.Do not alter the guarantee card,please confirm that the serial number on the guarantee card is the same with radio. 4.One-year guarantee for radio,half a year guarantee for accessory. 5.Users can get maintenance service from following ways:
*RWRWKHVKRSZKHUH\RXERXJKWWKHUDGLR
)LQGRXUORFDOPDLQWHQDQFHDJHQW
6HQGEDFNWRRXUFRPSDQ\
51 52 FCC Statement INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer for technic FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved by the party responsible/Iradio Electronics Co., Ltd. The user could lose the authority to operate this equipment if an unauthorizedchange or modification is made. This Iradio transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. FCC 47 CFR 1.1307, 1.1310 & 1.1093 RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements & the American National Standards Institute. American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers
(IEEE) C95.1: 2005 The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. While transmitting (holding the PTT switch or speaking with VOX enabled), always keep the antenna and the radio at least 2.5cm (1 inch) from your body or face, as well as from any bystanders. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by Iradio. Use only Iradio authorized accessories
(antennas, battery packs, belt clips, Speaker/Mics or headsets etc.): When worn on the body, always place the radio in a Iradio recommended clip or carrying case meant for this product. The use of other than recommended or approved body-worn accessories may result in RF exposure levels which exceed the FCCs occupational/controlled environment RF exposure limits.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-09-01 | 406.1 ~ 470 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-09-01
|
||||
1 | Applicant's complete, legal business name |
Iradio Electronics Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0020374252
|
||||
1 | Physical Address |
No.16 Daxiamei Industrial Area, Nan'an
|
||||
1 |
Quanzhou City
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
Y23
|
||||
1 | Equipment Product Code |
DM-568
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C****** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
86-59********
|
||||
1 | Fax Number |
86-59********
|
||||
1 |
b******@qziradio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Two-way Radio | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. Power switchable between 1 W and 5 W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Head: 4.02 W/kg for 50% Duty Cycle; Body: 5.33 W/kg for 50% Duty Cycle. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bay Area Compliance Laboratories Corp.(kunshan)
|
||||
1 | Name |
j**** c********
|
||||
1 | Telephone Number |
86051******** Extension:
|
||||
1 | Fax Number |
+86 (********
|
||||
1 |
j******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | EF | 400 | 406 | 5 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | EF ES | 400 | 406 | 5 | 2.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
1 | 3 | 9 | EF ES | 400 | 406 | 5 | 2.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
1 | 4 | 9 | EF | 406.1 | 470 | 5 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 5 | 9 | EF ES | 406.1 | 470 | 5 | 2.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
1 | 6 | 9 | EF ES | 406.1 | 470 | 5 | 2.5 ppm | 7K60F1E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC