InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com IMPORTANT SAFETY INFORMATION User information on the disposal of electrical and electronic devices
(private households) Environmental influences Note: Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components. Risk of swallowing Caution: Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed. Safety instructions for use
- Do not expose the device to fire or high temperatures. The WEEE symbol on products and/or accompanying documents indicates that used electrical and electronic products must not be mixed with ordinary household waste. For proper treatment, recovery and recycling, take these products to the appropriate collection points where they will be accepted without charge. In some countries, it may also be possible to return these products to your local retailer when you purchase a corresponding new product. The proper disposal of this product serves to protect the environment and prevents possible harmful effects on human beings and their surroundings, which may arise as a result of incorrect handling of
- The battery capacity decreases when operated in a cold ambient waste. temperature. This is not a fault and occurs for technical reasons.
- Always store the device in its carrying bag in a dry, well-ventilated More detailed information on your nearest collection point is available from your local authority. In accordance with state legislation, penalties may be space. For prolonged storage, remove the batteries. imposed for the improper disposal of this type of waste.
- Do not expose your device to extreme temperatures lower than - 20C and higher than + 50C. For business customers within the European Union Please contact your dealer or supplier regarding the disposal of electrical
- The product shall only be connected to a USB Type C interface. and electronic devices. He will provide you with further information.
- If the device has been damaged or the battery is defective, send the device to our after-sales service for repair. Information on disposal in other countries outside of the European All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Union This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option. Intended use The device is intended for displaying heat signatures during nature observation, remote hunting observations and for civil use. This device is not a toy for children. Use the device only as described in this instruction manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use. Function test
- Before use, please ensure that your device has no visible damage.
- Test to see if the device displays a clear, undisturbed image.
- Check that the settings for the thermal imaging camera are correct. See the notes in the section Operation. Installing/removing the battery The Mini II MH25W series need to install one ICR123 batteries for use. Refer to the section Battery Installation for details. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 1 Specifications Model MH25W Detector Parameters Detector Type VOx Uncooled Resolution, pixels 640 512 Pixel Size, um NETD, mk Frame Rate, Hz Optics Parameters 12 40 50 Objective Lens, mm 25 Diopter Adjustment, D
-5 ~ +5 Field of View, 17.6 13.2 Optical magnificationx 1 Digital zoomx 1.0 ~ 4.0 Detection Range, m
(Target size: 1.7m0.5m, P(n)=99%) 1298 Display Parameters Type OLED Resolution, pixels 1024 768 Electrical Parameters Battery ICR123A (3.7v) 1 / 16650 1
(16650 battery is recommended) Max. Battery Life (t=22) *, h 2h / 4.5h External Interface USB Interface Video Output Functions Wi-Fi Photo / Video / MIC Built-in memory, GB Type-C PAL (RCA Port) 32 Remote Control Bluetooth Physic Parameters Housing Color **
Desert yellow / Black IP Rating Weight (without batteries), g IP66 340g Dimension, mm 128 70 x 45 Application Application Helmet / Weapon mountable The actual operating time depends on the density of Wi-Fi use, photographing, video recording, etc. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com The MH25W series includes two housing colorsdesert yellow and black 3 Components and Controls with different PN numbers. Improvements may be made to the design and software of this product 1. Lens cover to enhance its features. 2. Objective lens If there is any change to the technical specifications of the product, it will 3. Lens focus ring be made without prior notice to the customer. 2 Description Mini II MH25W is a multifunction thermal imager with built-in VOx uncooled infrared focal plane array detector. Mini II series has small size, light weight, high performance, various purpose and many other strengths. Moreover, a variety of sensors are equipped and it not only can be used as Monocular hand-held thermal imager or portable infrared thermal image sight but also can be used as wearable device when installed on the helmet. Mini II series can be widely used in investigation, security, search and rescue, outdoor sports and other application fields. 4. Battery cover 5. Type-C interface 6. Microphone 7. Rotary encoder 8. Eyepiece 9. Eyeshade 10. Helmet mounting kit All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 4 Features 1024768 high resolution AMOLED display Support photographing and video recording 32GB built-in memory Support InfiRay Outdoor app Microphone input Bluetooth remote control Four image modes white hot, black hot, red hot, pseudo color Monocular digital zoom: 1.0 ~ 4.0 Helmet & weapon mountable 5 Icons Instructions Take picture Image mode: B (Black hot)W White hotRRed hotCPseudo Color Screen brightness adjustment Laser indicator *
Shutter calibration Auto shutter calibration Manual shutter calibration Video Bluetooth *
Wifi Microphone E-zoom Video output Battery capacity indicator Type C connection The laser function may be disabled due to the legal restrictions in your countries and regions. The product does not support bluetooth, the bluetooth function has been disabled . All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 6 Battery Installation threading. Install one 16650 battery correctly according to the battery polarity (12) ICR123A Battery Installation marked on the housing. Open the battery cover (4) counterclockwise according to the prompt Then, turn clockwise to close the battery cover (4). identification on the cover. Install one ICR123A rechargeable battery correctly according to the battery polarity (12) marked on the housing, that is, the positive pole facing in and the negative pole facing out. Then, turn clockwise to close the battery cover (4). Battery level is displayed on the status bar when the device is on. When the battery icon turns red, please replace the new battery in time. Safety Regulation It is necessary to power off before replacing battery. Please use standard batteries. Do not throw the batteries away or put 16650 Battery Installation them into fire after usage. Please use standard charger to prevent the product from damage. 16650 battery is also supported by the extended battery accessory for Short circuit products are prohibited. longer battery life. Turn counterclockwise to open the battery cover (4). Attach the extend battery accessory (11) to the battery compartment by It is prohibited to expose the product in the high temperature environment more than 60. It is prohibited to put the product into fire All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 7 Description of Rotary Encoder 8 Operation Current Status Rotate Short Press Long press Open the lens cover (1). Press and hold down the Rotary Encoder (7) for 3s to power the Power off the device when the lens is device on. Wait for 5s until thermal image appears on the display. Home screen Digital zoom Enter the vertically down. Lens Focus Adjustment: Rotate the lens Focus knob (3) to focus shortcut menu Enter the main menu on the object being observed. interface interface when the Calibration: In shortcut menu, select the calibration icon and short Shortcut Toggle the Adjust the lens is pointing at other directions. press the Rotary Encoder (7), when the lens is vertically down, it will do a background calibration, and when the lens is pointing at menu menu parameters of other directions, it will do a shutter correction. Before preforming interface options the option photo option is selected Take a photo Start / End the video recording Main menu interface Toggle the submenu options Switch the main menu function /
Adjust the parameters of the submenu option background calibration, please close the lens cover (1) first. Power Off: After using, keep the lens downward and long press the Rotary Encoder (7) for 3s to power off the device. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 9 Shortcut Menu In the home screen, short press Rotary Encoder (7) to enter the shortcut menu interface. There are five functions, in order is camera, image mode, screen
brightness, laser and image correction. Rotate the Rotary Encoder (7) to switch among the five functions. Press the Rotary Encoder (7) to adjust the function parameter. Press and hold the Rotary Encoder (7) exit the shortcut menu. It will automatically exit to the home screen if no operations is performed within 5 seconds. Shortcut Menu Options and Descriptions Shortcut menu items Operation Take a picture or Record videos Rotate the Rotary Encoder (7) to select the Camera camera icon. Short press the Rotary Encoder (7) to take a photo Long press Rotary Encoder (7) to start / end a video recording Select the image mode Rotate the Rotary Encoder (7) to select the Image mode icon Image mode Short press the Rotary Encoder (7) to switch the image mode. There are four modes for selection, in order of White hot (W), Black hot (B), Red hot (R), Pseudo Color (C). All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com The current mode will be displayed on the the Rotary Encoder (7) to do the background status bar in the upper left corner of the correction. Screen brightness screen. Adjust the screen brightness There are five levels for selection. Rotate the Rotary Encoder (7) to select the Image mode icon. Short press the Rotary Encoder (7) to adjust the screen brightness level. Laser Turn on/off the laser indicator When the lens is pointing at other directions, short press the Rotary Encoder (7) to do shutter calibration. 10 Main Menu In the home screen, press and hold down the Rotary Encoder (7) for 3 seconds to enter the main menu interface (Dont keep the lens
(If the model supports the Rotate the Encoder (7) to select the laser downward). The functional options from left to right are:
icon. Device (WifiBluetoothMicrophoneM-sensor) laser function) Short press the Encoder (7) to turn the laser Function (Video outRangefinderPIP);
indicator on / off. Reticle (TypeColorPattern) Calibrate the image sensor manually Calibration (LaserReticleTime) Rotate the Rotary Encoder (7) to select the Setting (Factory resetSharpnessNUC modeStandbyBattery type) Image correction image correction icon. When the lens is vertically down, short press All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Operations:
In the main menu, press the Rotary encoder briefly to switch the main menu option. In main menu option, rotate the rotary encoder to switch the secondary menu. In secondary menu, press the rotary encoder briefly to adjust the parameters of present option. Press and hold down the rotary encoder for three seconds to exit from the main menu interface to the home screen. Main menu function description Function Option item Operation Device Wi-Fi Turn Wi-Fi function on/off Press and hold down the rotary encoder to enter the Main Menu interface. Rotate the rotary encoder to select the Wi-Fi option. Turn the Wi-Fi function on /off with a short press of rotary encoder. The icon will be displayed on the top left corner of the screen when the Wi-Fi is on. When Wi-Fi is on, it can be connected with the mobile phone APP. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Turn the Bluetooth function on/off Press and hold down the rotary encoder to enter the Main Menu interface. Rotate the rotary encoder to select the Bluetooth option. Bluetooth Turn the Bluetooth function on /off with a short press of rotary encoder. The icon will be displayed on the top left corner of the screen when the Bluetooth is on. When Bluetooth is on, the device can be connected with the remote controller. Turn Microphone function on/off Press and hold down the rotary encoder to enter the Main Menu interface. Rotate the rotary encoder to select the Microphone option. Microphone Turn the Microphone function on /off with a short press of rotary encoder. The icon will be displayed on the top left corner of the screen when the Microphone is on. When Microphone is on, the sound can be recorded while recording videos. Msensor Turn Msensor function on/off Press and hold down the rotary encoder to enter the Main Menu interface. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Rotate the rotary encoder to select the Msensor option. Turn the Msensor function on /off with a short press of rotary encoder. The Horizontal and vertical angles will be displayed on the left side of the screen when the M-sensor is on. Turn Video out function on/off Press and hold down the rotary encoder to enter the Main Menu interface. Press the rotary encoder briefly to switch to the Function item. Then rotate the rotary encoder to select the video out option. Video out Turn the video out function on /off with a short press of rotary encoder. Function The icon will be displayed on the top right corner of the screen when the video out is on. When video out is on, the device can be connected with an eternal display or recording device via type C cable. Turn the stadiametric rangefinder function on/off Rangefinder Press and hold down the rotary encoder to enter the Main Menu interface. Press the rotary encoder briefly to switch to the Function item. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Then rotate the rotary encoder to select the Rangefinder option. Turn the stadiametric rangefinder function on /off with a short press of rotary encoder. When the stadiametric rangefinder function is on, it will enter the stadiametric rangefinder interface automatically. You will see the following on the display: two ranging lines, icons of three reference objects and respective distances of each. There are three pre-set reference objects:
- Bear - height 1.7m
- Wild boar - height 0.9m
- Hare - height 0.2m Rotate the rotary encoder until the ranging lines are aligned with the target. Rotate clockwise to increase the distance between ranging lines and rotate counterclockwise to decrease the distance. The distance to the object is automatically recalculated while moving the measurement bars and displayed on the left of the three reference objects. Long press the rotary encoder to exit to the home screen. PIP Turn the PIP function on/off Press and hold down the rotary encoder to enter the Main Menu interface. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Press the rotary encoder briefly to switch to the Function item. Then rotate the rotary encoder to select the PIP option. Turn the PIP function on /off with a short press of rotary encoder. When the PIP function is on, a small window will appear on the top of the display. The image in the small window is a 2x magnified image centered by the reticle center. Select the gun type Press and hold down the rotary encoder to enter the Main Menu interface. Type Press the rotary encoder briefly to switch to the Reticle item. Rotate the rotary encoder to select the Type option. Press the rotary encoder briefly to switch the gun type. There are four types for selection:
Reticle G1/G2/G3/G4. Select the reticle color Press and hold down the rotary encoder to enter the Main Menu interface. Color Press the rotary encoder briefly to switch to the Reticle item. Rotate the rotary encoder to select the Color option. Press the rotary encoder briefly to switch Reticle color. There are three colors for All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com selection: White (W), Black (B) and Green (G). Select the reticle pattern Press and hold down the rotary encoder to enter the Main Menu interface. Pattern Press the rotary encoder briefly to switch to the Reticle item. Rotate the rotary encoder to select the Pattern option. Press the rotary encoder briefly to turn off the Reticle (OFF) or switch the Reticle Pattern. There are four patterns for selection. Calibrate the laser indicator When the target position pointed by the laser is not consistent with the laser cursor on the display, this function can be used to correct the laser position. Press and hold down the rotary encoder to enter the Main Menu interface. Laser Press the rotary encoder briefly to switch to the Calibration item. Calibration
(If the model supports laser Rotate the rotary encoder to select the Laser option. function) Press the rotary encoder to enter the laser calibration interface. The laser cursor appears on the screen, and a tooltip appears at the bottom of the screen. The tooltip displays the moving direction (horizontal and vertical directional arrows) and the position of the cursor. The horizontal and All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com vertical arrows indicate to move the laser cursor with the coordinates along the X and Y axes. Switch movement direction with a short press of the rotary encoder. Rotate the rotary encoder to move the laser cursor. Rotate clockwise to move upward /
rightward, and rotate counterclockwise to move downward / leftward. When done, press and hold down the rotary encoder to save and exit to the home screen. Calibrate the reticle Press and hold down the rotary encoder to enter the Main Menu interface. Press the rotary encoder briefly to switch to the Calibration item. Reticle Rotate the rotary encoder to select the Reticle option. Press the rotary encoder to enter the reticle calibration interface. The white cross cursor appears on the screen, and a tooltip appears at the bottom of the screen. The tooltip displays the moving direction (horizontal and vertical directional arrows) and the position of the cursor. The horizontal and vertical arrows indicate to move the laser cursor with the coordinates along the X and Y axes. Switch movement direction with a short press of the rotary encoder. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Rotate the rotary encoder to move the cross cursor. Rotate clockwise to move upward /
rightward, and rotate counterclockwise to move downward / leftward. When done, press and hold down the rotary encoder to save and exit to the home screen. NOTES: The type of gun selected should be confirmed before the reticle calibration. The value display is the default distance of 100 meters. Calibrate the Time Press and hold down the rotary encoder to enter the Main Menu interface. Press the rotary encoder briefly to switch to the Calibration item. Rotate the rotary encoder to select Time option. Press the rotary encoder to enter the time setting Time interface, that is displayed as Year. Month. Day | Hour:
Minute format. Short press the rotary encoder to switch among the Year/Month/Date/Hour/Minute and rotate rotary encoder to select the correct value. Press and hold down the rotary encoder to save the settings and exit to the home screen. Setting Factory Reset Reset to the Factory Settings Press and hold down the rotary encoder to enter the Main Menu interface. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Press the rotary encoder briefly to switch to the Setting item. Rotate the rotary encoder to select the Factory Reset option. Short press of rotary encoderthe screen will prompt Restore to factory settings?. Select Yes to do factory resetting and select No to exit the Factory Reset option. Adjust the image sharpness Press and hold down the rotary encoder to enter the Main Menu interface. Sharpness Press the rotary encoder briefly to switch to the Setting item. Rotate the rotary encoder to select the Sharpness option. There are four levels for selection. Short press the Rotary encoder to adjust the screen sharpness level. Select the NUC Mode: Auto or Manual Press and hold down the rotary encoder to enter the Main Menu interface. NUC Mode Press the rotary encoder briefly to switch to the Setting item. Rotate the rotary encoder to select the NUC Mode option. Short press the Rotary encoder to select auto or manual NUC Mode. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Turn the standby mode on/off Press and hold down the rotary encoder to enter the Main Menu interface. Standby Press the rotary encoder briefly to switch to the Setting item. Rotate the rotary encoder to select the Standby option. Short press the Rotary encoder to turn the standby mode on/off. 11 Stadiametric Rangefinder Stadiametric rangefinder can estimate approximate distance to an object of known size. Enter the stadiametric rangefinder interface in the main menu, referring to the Section 10 Main Menu - Function - Rangefinder. You will see the following on the display: two ranging lines, icons of three reference objects and respective distances of each. There are three pre-set reference objects:
- Bear - height 1.7m
- Wild boar - height 0.9m
- Hare - height 0.2m Rotate the rotary encoder until the ranging lines are aligned with the target. Rotate clockwise to increase the distance between ranging lines and rotate counterclockwise to decrease the distance. The distance to the object is automatically recalculated while moving the measurement bars and displayed on the left of the three reference objects. Exit rangefinder mode with a long press of the rotary encoder. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 12 Bluetooth Remote Control between, the Bluetooth remote control will continue to search for connection within 1 minute. Turn off the Bluetooth on the device, and the remote control will automatically shut down if no Bluetooth signal is found within 1 minute. 13 Wi-Fi function MH25W is equipped with external devices that can be connected via Bluetooth. The rotary encoder functions and operation methods are MH25W has a built-in Wi-Fi module, which enables the device to connect wirelessly to external devices such as computers and smart also corresponding with MDH25W device. phones. Turn on the Bluetooth of the device and the icon will be flashing at top left corner of the screen (referring to the Main Menu - Device-
Bluetooth). Long press the Rotary encoder on the remote control for 15s until Enable Wi-Fi on the device through the main menu operation. Retrieve a Wi-Fi named "MH25W_xxxxxx" on a external device, where XXXXXX represents the SN code of the device. Select the Wi-Fi, enter the password and connects. The initial the Bluetooth icon on the screen turns to
, which means the password is 12345678. connection is done and the remote control is ready to use. Wi-Fi successfully connects and controls the device through APP After connecting to the device, if the signal is disconnected in Set the Wi-Fi name and password All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com The MH25W allows users to change the name and password of device and recording. For specific operations, you can download the operation Wi-Fi in the APP instructions of the APP from the company website. In APP, locate the "Settings" icon, click and enter the Settings interface;
Take Photos Enters and submit the new Wi-Fi name (SSID) and password in the Short press the Rotary Encoder (7) to select the photo icon text box;
Short press the Rotary Encoder (7) to take a picture, the screen Submission complete and needs to restart the device to take effect. freezes for 0.5s, and a photo icon appears on the screen. Photographs are saved in a built-in storage space. Note Restore factory Settings, the Wi-Fi name, password, and system Video recording time are restored to the factory default Settings. Short press the Rotary Encoder (7) to select the photo icon. 14 Take photos and Video recording The MH25W has built-in storage space for photo taking and video Hold and press the Rotary Encoder (7) to record a video, and it will display a recording time icon in the top right corner of screen, the time format is MM: SS (minute: second). Recording process, the red dot on the left side of the tip box recording. The files of images and videos will be named by time, so it is flashes. recommended to set the time in the main menu or synchronize the time in the Settings of the APP before using the function of photographing Select the taking picture menu, and hold down the rotary encoder to stop and save the recording. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com The videos and photos are saved in the built-in storage space. unit using a non-greasy organic solvent. 15 Technical Inspection A technical inspection of the device is recommended before use. Check the external appearance of the device (there should be no cracks in the casing). Check the condition of the lens and eyepiece (there should be no Check the glass surfaces of the eyepiece and the lens. If necessary, remove dust and sand from the lenses (preferably using a non-
contact method). Cleaning of the external surfaces of the optics should be done with substances designed especially for this purpose. 17 General Trouble Shooting cracks, greasy spots, dirt or other deposits) The table lists all the problems that may occur when operating the device. Carry out the recommended checks and troubleshooting steps in the order shown in the table. If there are defects that are not listed in the table or it is impossible to repair yourself, please contact with us as soon as possible. Private demolition is strictly prohibited. 16 Maintenance Maintenance should be carried out at least twice a year and consist of the following actions. Wipe the external surfaces of metal and plastic parts free of dust and dirt with a cotton cloth. Silicone grease maybe used for this. Clean the electrical contacts of the battery and battery slot on the All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Trouble description Probable reason Trouble shooting Wrong battery installation. Reinstall the batteries observing polarity Fail to start up Batteries are fully exhausted or low power. Change and install new batteries. Battery cover is not tightly closed. Close tightly the battery cover. Fail to work with an external power supply Image is fuzzy, not clear, with vertical stripes and uneven background. Insufficient external supply voltage. Check the voltage of external power supply. No calibration for a long time. Perform the calibration according to the section Operation. Image is too dark. Low screen brightness. Adjust the screen brightness. Blurred image with clear GUI The objective lens is not focused. There is dust or condensate on the interior or exterior optical surfaces of the lens. Adjust the focus ring of the objective lens until the image becomes clear. Wipe off the outside optical surfaces with a soft cotton cloth. Let it dry by leaving it in a warm environment for 4 hours. The video out function is not turned on. Turn the video out function in the Main Menu. No analog video output Data cable doesnt support data transmission. Replace a new data cable. Point of impact does not match the aiming point. Reticle calibration needs to be done. Do reticle calibration according to the section 10 CalibrationReticle. All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com 18 Legal and Regulatory Information to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Wireless transmitter module frequency range:
including interference that may cause undesired operation. WIFI 2.4G: 2412-2472MHz (For EU) Wireless transmitter module power<20dBm (only for EU) Information to the user Any Changes or modifications not expressly approved by the party IRay Technology Co., Ltd. thus declares that the Mini responsible for compliance could void the user's authority to operate the MH25W series complies with the directives equipment. 2014/53/EU and 2011/65/EU. The full text of the EU Note: The manufacturer is not responsible for any radio or TV declaration of conformity as well as additional interference caused by unauthorized modifications to this equipment. information are available at: www.infirayoutdoor.com. Such modifications could void the users authority to operate the This device may be operated in all member states of equipment. the EU. FCC Statement FCC ID: 2AYGT-24-00 Labeling requirements This device complies with part 15 of the FCC Rules. Operation is subject All rights reserved and shall not be copied and distributed in any form without written permission InfiRay Outdoor Mini II MH25W Operating Manual www.infirayouordoor.com Body-worn Operation This device was tested for typical body-support operations. To comply The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure with RF exposure requirements, a minimum separation distance of condition without restriction. 0mm must be maintained between the user's body and the handset,including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. The maximum results of Specific Absorption Rate (SAR) found during testing for MH25W are 0.504W/kg Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. All rights reserved and shall not be copied and distributed in any form without written permission