FCC ID: 2AYGT-254-1 Saim Thermal Imaging Monocular

Quick Start Guide SAIM NV series SCD35 Please read this manual before using the product, and keep the guide for future reference For detailed information about the device, please download the complete user manual from the official website (www.infirayoutdoor.com). Package Contents SAIM NV SCD35 Day & Night Scope Picatinny Mount External IR Illuminator850nm or 940nm External IR Illuminator Mount IEB-2 Extra Battery (for 16650 battery) Type-C Cable Lens Cloth Two Wrenches (for mounts) Two Screws (for picatinny mount) Quick Start Guide Components and Controls 1. Eyeshade 2. Eyepiece diopter adjustment ring 3. Type C interface 4. Camera (C) button 5. Menu (M) button 6. Power (P) button 7. Battery compartment 8. Lens focus ring 9. Objective lens 10. Lens cover Getting Started Remove the lens cover (10). Press and hold the Power (6) button to turn on the device. Rotate the eyepiece diopter adjustment ring (2) to adjust the resolution of the icon on the display. Rotate the lens focus ring (8) to focus on the object being observed. Press and hold the P (6) + M (5) + C (4) buttons for 15s to enable the reticle functions. On the home screen, briefly press the Power (6) button to set the digital zoom. Press the M (5) button to enter the shortcut menu to set the image mode, display brightness, reticle color and reticle type. After using, press and hold the Power (6) button to enter the power-off interface. Then, select the second option with a short press of the C (4) button and confirm your selection with the M (5) button to turn off the scope. During the saving data, do not disconnect it from the power source, otherwise, the data cannot be saved. Button Operation Button Current status Short press Long Press Powered off Home screen Digital zoom Standby mode Wake up the device Power button Menu interface Scroll up the menu option Power on the device Enter the power-off interface Menu button

(M button) Range notification setting interface Zeroing interface Increase the value slowly Increase the value fast Move the reticle up / left Move the reticle up / left slowly fast Home screen Enter the shortcut menu Enter the main menu Shortcut menu interface Change parameter Main menu interface Confirm the selection /

Enter the submenu Power-off interface Confirm the selection Range notification setting interface Change options Switch the movement Zeroing interface direction between X and Y Save and exit to the home screen Save and exit to the Main menu screen Home screen Take a photo Start a video recording Shortcut menu, main menu, power-off interface Scroll down the menu option Camera button

(C button) Video recording Take a photo Stop and save the video recording Range notification setting interface Zeroing interface C button + M button Home screen Decrease the value slowly Decrease the value fast Move the reticle down /

Move the reticle down /

right slowly Enter the range notification interface right fast Range notification interface Range notification setting interface Exit to the home screen notification settings Enter the range interface Save and exit to the range notification interface Battery Installation The installation of CR123 batteries Open the battery compartment cover (7) anticlockwise according to the prompt identification on the cover. Install the two CR123 batteries correctly according to the marking on the battery cover and inside it. When done, replace the battery cover (7) - the latches from both sides of the cover will pull out (see the drawing above), then press it until its clicking position - make sure the cover is closed on both sides correctly. Battery level is displayed on the status bar. When the battery icon turns red, please replace the new battery in time. It is necessary to power off before replacing the batteries. The installation of 16650 batteries When using the 16650 batteries, the IEB-2 Extra Battery cover (11) is needed to replace the original battery cover (7). Remove the battery compartment cover (7) and install the two 16650 batteries correctly according to the marking on the battery cover and inside it. Place the IEB-2 Extra Battery cover on the battery compartment and press it until its clicking position. After installation, install the original battery cover (7) on the IEB-2 Extra Battery cover (11) as shown below. Press down the elastic blocks on both sides at the same time to remove the IEB-2 Extra Battery cover (11). Specifications Model SCD35 Microbolometer Type Resolution, pixels Pixel, m Optical Specifications Objective lens, mm Field of view, Optical magnification, Digital zoom, Exit pupil distance, mm Diopter, D Display Type Resolution, pixels Dimension, inch Battery Battery type HD CMOS 19201080 4 35 / F1.2 8.4 6.3 3 ~ 12 1 / 2 / 3 / 4 35

- 7 ~ +3 FLCOS 1280960 0.39 CR1233.7V* 2 / 16650 * 2 Max. battery life (t=22)*, h 3.5 (CR123) / 7 (16650) External power supply, V Physical Specifications Detection range, m IP rating Built-in memory, GB Photo / Video resolution, pixels Operating temperature, Max. recoil power on rifled weapon, m/s Weight (without batteries), g Dimension, mm IR illuminator Wavelength, nm 5 (Type C) 200 IP66 16 1280960

-20 ~ +50 1000 g 430 1956161 850 / 940 Battery type Max power, W 18650 1.5 The actual operating time depends on the density of Wi-Fi use, photographing, video recording, etc. Improvements may be made to the design and software of this product to enhance its features;

If there is any change to the technical specifications of the product, it will be made without prior notice to the customer. Update and InfiRay Outdoor In order to continuously improve the product performance and provide better user experience, the software program, as well as parameters of the device will be constantly updated. Users can go to the official website (www.infirayoutdoor.com) to download and update. The Saim NV series support InfiRay Outdoor app technology, that can transmit the image via Wi-Fi from your scope to a smartphone or tablet and update the program. Download and install the InfiRay Outdoor app from the official website (www.infirayoutdoor.com) and app store, or scan the QR code below to download directly. Important safety information Environmental influences

- Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.

- Avoid touching the metal surface (cooling fins) after exposure to sunlight or cold. Ergonomics notes Take breaks after longer periods of use to avoid wrist pain. Risk of swallowing Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed. Safety instructions for use

- Handle the device with care: rough handling can damage the internal battery.

- Do not expose the device to fire or high temperatures.

- Install the batteries correctly according to the instruction on the device. Reverse connection is prohibited.

- If the device has been damaged, send the device to our after-sales service for repair. User information on the disposal of electrical and electronic devices (private households) 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Intended use The device is intended for displaying heat signatures during nature observation, remote hunting observations and for civil use. This device is not a toy for children. Use the device only as described in this operating manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use. Function test

- Before use, please ensure that your device has no visible damage.

- Test to see if the device displays a clear, undisturbed image.

- Check that the settings for the device are correct. Installing/removing the battery The Saim NV series day & night scope need to install two CR123 (3.7V) or 16650 batteries for use. Refer to the section Battery Installation for details. Legal and Regulatory Information Wireless transmitter module frequency range:

WLAN: 2.412-2.472GHz (For EU) Wireless transmitter module power<20dBm (only for EU) IRay Technology Co., Ltd. thus declares that the AFFO series thermal imaging monocular complies with the directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity as well as additional information are available at:

www.infirayoutdoor.com. This device may be operated in all member states of the EU. Regulatory information USA FCC ID: 2AYGT-254 Labeling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to the user Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Body-worn Operation This device was tested for typical body-support operations. To comply with RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. We, IRay Technology Co., Ltd., hereby declare that this product was tested conforming to the applicable FCC rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.

IRay Technology Co.,Ltd FCC Class II Permissive Change Request Letter Date: 2022/5/26 To FCC:

RE: FCC Permissive II Change Request for Company: IRay Technology Co.,Ltd FCC ID:

2AYGT-254-1 We are submitting an application for a class II permissive change to the FCC approval of the Company name: IRay Technology Co.,Ltd , product description: Saim Thermal Imaging Monocular (FCC ID: 2AYGT-254-1, Original Grant Date: 01/13/2022). The transmitter module itself has not changed. Here are the changes:

1. Add one more model name: SCD35,SCD50 2. Remove the electronic compass , Please see below pictures Signature:

Name/Title: Peng Zhang/ Quality Supervisor Company name: IRay Technology Co.,Ltd Tel: 086-18562243217 E-Mail: pzhang@iraytek.com Address: 11GUIYANG STREET, YANTAI ECONOMY AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA

IRay Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Confidentiality FCC ID: 2AYGT-254-1 Date: 2022/05/26 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: Peng Zhang Title: Quality Supervisor

Letter of Authorization Company:

IRay Technology Co.,Ltd Address:

11GUIYANG STREET, YANTAI ECONOMY AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA Product Name:

Saim Thermal Imaging Monocular Model Number:

SCD35,SCD50 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name:

Peng Zhang Date: 2022/05/26 Title:

Quality Supervisor Signature of applicant:

IRay Techonlogy Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022/01/12 Subject; Request for Confidentiality FCC ID: 2AYGT-254-1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Peng Zhang Title: Quality supervisor

C5266091_X8_Ed.1 Letter of Authorization Company: IRay Technology Co., Ltd. Address: 11GUIYANG STREET, YANTAI ECONOMY AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA Product Name: P Series Pocket Thermal Camera Model Number: SCT35, Sperber35, ET50, HOGSTER-35, NEON S2, FOX 35, MS-42R, SUPER HOGSTER-35, IRUS_RB35, LGT A10 FCC Identifier: 2AYGT-254-1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name:

Title:

Signature of applicant:

Date: 2021-12-29 Quality supervisor Peng Zhang 1/1

Dear Sir, Declaration Letter For our business issue and marketing requirement, we would like to list below model numbers on the certificates and reports, as following:

Main Model: SCT35 Serial Model No.: Sperber35, ET50, HOGSTER-35, NEON S2, FOX 35, MS-42R, SUPER HOGSTER-35, IRUS_RB35, LGT A10 We declare that the difference of these is listed as below:

The only difference is the model name and lens size for difference market, this change not affect the RF parameters. Signature:

Name/Title: Peng Zhang & Quality supervisor Company name: IRay Technology Co., Ltd. Tel: 086-18562243217 E-Mail: pzhang@iraytek.com Address: 11GUIYANG STREET, YANTAI ECONOMY AND TECHNOLOGY DEVELOPMENT DISTRICT, YANTAI SHANDONG P.R.CHINA Date: 2022/01/10