User Guide RITE Touch
* The functions and design of this product can be changed for quality improvement without prior notice. This product is for indoor use only. Do not attempt to disassemble the RITE Touch. To do so may result in injury and product damage. Do not apply water directly to the RITE Touch. Do not apply chemical substances such as alcohol during cleaning. Do not force with a tool. Keep the PIN code concealed. Do not let an unauthorized person observe the PIN code. Ensure the door is securely locked when leaving the area, especially in manual lock mode. Keep the surface of the lock free from foreign materials and debris. Do not use touch pad with dirty or wet fingers. Ensure the glass door surface is free from films and protective coverings before installation. For double doors, it is recommended that the strike side is stationary. s e r u t a e F y t e f a S 2 1 2 3 4 5 Advanced Mode Advanced Mode can be used for professional and high security management. Magic Mirror The Magic Mirror design allows the keypad to appear on the mirror as soon as it is touched by a user. The user can also use the Magic Mirror to visually survey the surroundings to monitor safety and security. Safe Thumb-Turn The manual thumb-turn enhances user security by requiring the pressing of the two safe buttons on either side of the knob and simultaneous turning of the knob. Modern Design The sophistication of the digital keypad technology is complemented by the elegantly thin design of the solid lock base. High Temperature Alarm In the event of a fire, an audible alarm will be triggered and the lock will automatically retract the deadbolt. P r o d u c t F e a t u r e s 3 Basic Contents User Guide Installation Template Card Keys (x4) Mounting Screws Front Body Back Body Strike for Double Doors Single Door Magnet Extension type deadbolt 10mm door thickness gasket (13/32) Specications Parts Specications Front Body Back Body Battery 9/16(D) x 2-7/8(W) x 7-5/16(H) inches 14(D) x 73(W) x 186 (H) millimeters 1-15/16(D) x 3-1/16(W) x 7-1/2(H) inches 49(D) x 77.5(W) x 190.5(H) millimeters Remarks Operating Temperature:
5 to 130 F
-15 to 55 C 1.5 AA Alkaline batteries x4 Operating voltage: 4.5 6 V Effective for 1 year
(based on 10 daily uses) Due to the nature of the Magic Mirror, exposure to intense direct light may change the color of the product over time. w e i v r e v O s t n e n o p m o C 4 Front Body Back Body Keypad Low Battery Indicator Card Reader Emergency Power Supply Terminal Dead Bolt i S p e c fi c a t i o n s 5 Battery Cover Slot for Remote Control module
(sold separately) Registration Button Manual Thumb Turn Safe Knob Open/Close Button s n o i t c u r t s n I g n i t a r e p O 6 Using the Keypad Registering User PIN Code User PIN Code must be 4 to 12 digits. Special characters [*] and [#] are not allowed. Press
(Registration) button Enter User PIN Code
(4 to 12 digits) Press
(Registration) button Open Door with User PIN Code Touch with palm Enter User PIN Code
(4 to 12 digits) Touch with palm or press [*] button to end Using the Card Reader Registering Card Keys Press
(Registration) button Open Door with Card Key Contact Card Key Contact all the cards you wish to register one by one Press
(Registration) button Caution Keep the door open while you register card keys to prevent accidentally getting locked out. Previously registered card keys will automatically be deleted when new card keys are registered. For security, please use only the RF cards provided in this package. Locking the Door To Close Door from Outside Step Manual lock status Auto lock status Icon Description Touch the keypad on the front body gently with your palm to lock the door. The built-in auto lock sensor automatically locks the door within 5 seconds after closing the door. To Close Door from Inside Step Icon Description Manual lock status
(default setting) Turn the manual thumb turn to unlock while pressing safe thumb turn buttons together. Auto lock status Press open/close button. The built-in auto lock sensor automatically locks the door within 5 seconds after closing the door. If an auto-lock magnet is not installed, the auto-lock feature is not enabled. If the door is twisted, the auto-lock feature will not function properly. Please check before use. O p e r a t i n g I n s t r u c t i o n s 7 Forced Lock Outside Forced Lock Setting - PIN Code Touch with palm Enter User PIN Code Press and hold [#]
button for 3 seconds Outside Forced Lock Setting - Card Key Contact Card Key for 3 seconds until you hear 3 beeps. If compulsory external lock is set up, the door open/close button will not function. The alarm will go off if someone tries to open the door by manually opening/closing the unit. To open the door by manually opening/closing the unit under compulsory external lock setting, completely turn the knob within one second, or else the door will lock itself again. Inside Forced Lock Setting Set Press and hold the open/close button for 5 seconds. Release Press the Registration button or turn the manual thumb turn while pressing buttons together. s n o i t c u r t s n I g n i t a r e p O 8 Auto/Manual Locking Mode To Set Automatic Locking Mode Auto-lock setting locks a door within 5 seconds after closing the door. Press
(Registration) button Enter [#] button Enter number and on the keypad Press
(Registration) button After a door is locked by the auto-lock function, please verify that the door is completely locked. To Set Manual Locking Mode
*Factory default setting Press
(Registration) button Enter [#] button Enter number and on the keypad Press
(Registration) button Do not to leave the door open in manual lock mode. Volume Setting Feature
*Factory default setting: High Press
(Registration) button Enter [#] button Press
(Registration) button O p e r a t i n g I n s t r u c t i o n s 9 Open/Close Button Setting Feature Outside Forced Lock Setting - PIN Code This feature disables and enables the open/close button. The on/off status of the function changes every time the setting is modified. When the system is set to off, the open/close button is disabled. Press button Enter [#] button Enter number 2 and 4 on the keypad Press button s n o i t c u r t s n I g n i t a r e p O 10 Alarm Features The alarm sounds for 30 minutes or until it is reset. The alarm can be reset by presenting the card key, or entering the User PIN code, or pushing and holding the open/close button for 5 seconds. Break in / Damage Alarm Break in: When someone tries to break in by opening the door when it is locked, the alarm sounds. Damage: When the front body is damaged due to forced separation or drilling, the alarm sounds. High Temperature Alarm In the event of a fire, an audible alarm is triggered and the lock automatically retracts the deadbolt. The High Temperature Alarm releases the deadbolt automatically even when the inside Forced Lock mode is set. S a f e t y F e a t u r e s 11 3-Minute Lock Feature If incorrect security codes or unregistered card keys are attempted 5 times in a row, the RITE Touch locks out for 3 minutes with the blinking LED. To Release 3-Minute Lock Method 1 Method 2 Press the Open/Close button. Press the Registration button. Method 3 Open with the thumb turn by pressing both buttons and turning. Open Door with Fake PIN Code A fake PIN code may be used to prevent the User PIN code from being unintentionally exposed. It may be used with the User code, not the One Time PIN code. Method 1 Touch with palm Press Any button Press Pin Code Touch with palm Method 2 Touch with palm Press PIN Code Press Any button Touch with palm
* 3-Minute Lock mode will not affect an alarm and is sustained even after the product is rebooted.
* Once 3-Minute Lock mode is initiated, the Fake PIN Code will not work until the next normal verification
(card key verification, User PIN code, or open door from inside). In this case, please open the door with User PIN Code. s e r u t a e F y t e f a S 12 Remote Control Module The Remote Control Module may be purchased separately from Adams Rite. It may be installed in the back body of the RITE Touch to activate the remote control feature. Installing the Remote Control Module Remote Control Module 1 Remove batteries Open the battery cover in the Back Body and remove all batteries. 2 Install Remote Control Module Connect the Remote Control Module to the connector. 3 Insert batteries Note polarity of batteries prior to installation. 4 Insert batteries An audible tone will signal successful startup. O p t i o n a l A c c e s s o r i e s 13 s e i r o s s e c c A l a n o i t p O 14 Remote Control To Register Remote Control Step Icon Description Press (Registration) button and #
Open the battery cover in the Back Body. Press (Registration) button and then #. Enter number 0 and 5 on the keypad Enter number 0 and then 5 on keypad. Register Remote Control Press the SET button on the Remote Control.
(Up to 5 Remote Controls may be registered) Press (Registration) button Press the (Registration) button in the Back Body again to complete the procedure. Reset Remote Control Step Icon Description Press (Registration) button and #
Open the battery cover in the Back Body. Press (Registration) button and then #. Enter number 7 and 5 on the keypad Press (Registration) Enter number 7 and then 5 on keypad. Press the (Registration) button in the Back Body again to complete the procedure. 1 2 3 4 1 2 3 Emergency Power Supply for Discharged Batteries Step Icon Description Contact the 9V Alkaline battery Open the emergency cover. Hold the 9V alkaline battery on the emergency power supply terminal during the following steps. Touch with palm Touch the keypad gently with your palm. Enter User PIN Code Enter User PIN Code. Touch with palm or enter * button Touch the keypad gently with your palm or enter
* button to confirm. 1 2 3 4 In the event of battery failure, the RITE Touch may be unlocked using a 9V battery. Emergency Power Supply for Discharged Batteries 1 2 Expiration Period The product uses four 1.5V Alkaline AA batteries. They should be effective for one year (based on 10 daily uses).
(Users are advised to use authentic alkaline batteries.) Low Battery Alarm All four batteries must be replaced in the following situations:
The low battery indicator light is illuminated on the front body The alarm melody sounds (nursery rhyme ting-a-ling melodies) The battery life varies depending on temperature, moisture levels, frequency of use, and the quality of batteries. E m e r g e n c y P o w e r 15 FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful inter ference when the equipment is operate d in a commercia l environment. This equipment generates, uses, and can radi ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equ ipment in a residential area is likely to cause harmful interference in which case the user will be required to correct t he interference at his o wn expense. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) the device may not caus e interference, and (2) t he device must accept an y interference, including interference that may cause undesired operation of this device. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICA TIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIA NCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. www.adamsrite.com 800.872.3267