Yale Smart Safe Installation Instructions Pour la version francaise voir US.YaleHome.com/Support 1 Download the Yale Access App Create an account 2 Unlock Safe Using Key Insert Batteries Tip: If you already use the August App, use the same username and password. Open door and leave open until setup is complete. Tip: When key is used to unlock, it must be used to lock. Open the battery compartment and insert 4 AA batteries. Reinstall the cover. Connect WiFi Bridge
(Included with Select Models) x4 Mounting Hardware x4 Rubber Feet Key x4 AA Batteries
(Alkaline only) Needed for Optional Installation Drill with 3/8" Drill Bit Pencil Phillips #2 Screwdriver Add Safe to the Yale Access App Set up Smart Safe Set up Connect*
Tap "Set up a device" from the app menu. When asked, scan the Yale QR code on the inside of your safe door. Note serial number located on back of Connect. Plug Connect into an INDOOR outlet within 10 feet of the Smart Safe. Tip: Once batteries are inserted, you have 10 minutes to complete this step. If your app doesn't find the safe, press and hold (5 secs) the reset button on the inside of the safe door. Tip: For best connectivity, make sure that the Connect bridge is in the line of sight of the front of the safe.
*Connect WiFi Bridge included with select models Create Entry Codes O Mount Safe For Added Security (Optional) optional There are 8 mounting hole locations on the Smart Safe. Use included mounting template for guidance to secure the safe to the wall, shelf or floor. Tips:
Use Phillips #2 screwdriver to tighten screws. To avoid scratching or damaging your floor, attach the included 4 rubber feet to the bottom of the safe with the 3M side against safe. Once added to the Yale Access App, you can create and delete entry codes or share app access by tapping the Guest icon in the bottom menu. 3 4 5 If you have any questions while installing, call our 24/7 tech support team! Call 1-855-213-5841 or email Support@YaleLock.com YRSF-MD-MNL-0020 Rev B Part of ASSA ABLOY Using Your Smart Safe Outside Low Battery Warning LED Keyhole Keyhole Cover Safe Wake Up /
Settings Enter/Unlock
(Set/Continue) 9 Volt Battery Back-up
(Use Alkaline battery) Hold battery to quickly recharge. Inside Key Hooks Battery Compartment LED Reset Button*
(Factory Settings) Safe can always be opened with the key or with a 9V battery and valid code.
* When safe is paired to app, Factory Reset must be done from app. During a factory reset the safe will be unlocked. Locking Safe Unlocking Safe Close Safe Door Press any key to lock safe Enter valid 4-6 digit code Press Settings Definitions Setting Default Definition Privacy Mode While in Privacy Mode, the safe will not open even when a valid Entry Code is entered. This setting can be changed from the Yale Access App. The inside light will automatically turn on and stay on for 10 seconds when the safe door is opened. Off On On Inside Light This feature cannot be turned off. One Touch Locking This setting cannot be turned off. Touching any key on keypad will lock the safe. Sound On The sound setting for entry code verification can be set from the Yale Access App. Warning: Changes or modications to this device not expressly approved by Yale Home could void the user's authority to operate the equipment. FCC ID: 2ABFG-IESD100PG0 IC ID: 11626A-IESD100PG0 FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC and IC RF Radiation Exposure Statement:
This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. RF du FCC et IC d'exposition aux radiations:
Cet quipement est conforme l'exposition de FCC et IC rayonnements RF limites -tablies pour un environnement non contrl. Lantenne pour ce transmetteur ne doit pas tre mme endroit avec dautres metteur sauf conformment FCC et IC procdures de produits Multi-metteur. Yale Home 24/7 Support 1-855-213-5841 US.YaleHome.com Yale is a registered trademark of Yale Home. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. Copyright 2021. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Home is prohibited. YRSF-MD-MNL-0020 Rev B Part of ASSA ABLOY