0 ST5e Version 3.0 Table of Contents KNOWING YOUR DEVICE DEVICE SPECIFICATION BASIC INSTALLATIONS THE BATTERY GUIDELINE FOR INSTALLING SIM/SAM CARD GUIDELINE FOR INSTALLING MICRO SD CARD FIRST TIME USE SCREEN CALIBRATION TIME, DATE AND TIME ZONE CONFIGURATION TOUCH SCREEN OPERATIONS USING THE STYLUS START MENU SHELL TASKBAR SOFTWARE INPUT PANEL (SIP) KEYPAD CUSTOMIZING ST5E LCD BRIGHTNESS CONTROL KEYPAD LIGHT CONTROL POWER DISPLAY MOUSE KEYBOARD AUDIO VOLUME STYLUS PROPERTIES 3 5 6 6 6 7 8 8 8 9 9 10 11 12 13 14 15 17 18 19 20 20 21 21 1 NETWORK & DIAL UP CONNECTION REGIONAL AND LANGUAGE SETTING OWNER PROPERTIES PC CONNECTION STORAGE PROPERTIES SYSTEM PROPERTIES PASSWORD PROPERTIES SCREEN ROTATION TASKBAR & SECURE SHELL INPUT SELECTION PANEL DATE & TIME PROPERTIES INTERNET OPTIONS REMOVE PROGRAMS INTERNET EXPLORER FEATURES WIRELESS LAN (WI-FI) USAGE BLUETOOTH USAGE GSM USAGE USING THE CONTACT CARD READER USING THE FINGERPRINT SENSOR USING THE BARCODE SCANNER APPENDIX: TROUBLESHOOTING GUIDE RESET THE ST5E AND CLEAR MEMORY IF ST5E RUNS OUT OF POWER IF ST5E RUNS OUT OF MEMORY INACCURATE RESPONSE TO STYLUS TAPS ROUTINE MAINTENANCE BATTERY GUIDELINES TRAVEL GUIDELINES SHIPPING GUIDELINES 22 22 23 23 24 25 25 26 26 27 27 28 28 29 30 30 32 37 39 40 40 41 41 42 43 44 44 45 45 46 2 Knowing Your Device FRONT Power Button 3 TOP BOTTOM REAR SIDE 4 Device Specification 256MB DDR-2 RAM, 4GB Flash 1 x micro-SD Memory Slot (Support up to 32GB) WinCE 6.0 Windows 7/ Vista/ XP C++ Programming, NET Programming in Microsoft Visual Studio 2005 Bluetooth Version 2.0 IEEE 802.11 b/g Wi-Fi 3.5G - W-CDMA, 850, 1900, 2100 MHz USB Client 1.1 (ActiveSync)
,GSM/ GPRS/ EDGE (1 x SIM Slot) 3.5 (480x640) Transflective TFT Colour Touch Screen 12 Alphanumeric Buttons, 3 Function Buttons and 1 Power On/Off Button 1 x Power Status, 1 x Network Status, 1 x Charge Status Built-in Mono Speaker 7.4V 1800mAH Li-ion Battery 4 - 6 Hours Systems Memory Memory Expansion Device Operating System Host PC Operating System Programming Language Communication Interfaces Bluetooth Wireless LAN Network USB Human Interfaces Displays Keypad LED Speaker Power Battery Operating Time Mechanical Dimension (LxWxH)(mm) Weight Environment Operating Temperature Storage Temperature IP Rating (Water & Dust Protection) IP65 Drop Test 1.5m Contact Card Reader 197 x 92 x 44 Approximately 600g
-10C to +50C
-20C to +60C MiFARE Classic / Ultralight / Ultralight C /Desfire / MiFARE Plus / Sony ISO/IEC 14443 A/B Part 1, 2, 3, 4 Up to 848 kbps (Card Type Dependant) Standard Card Slot Communication Speed Card Type ISO/IEC 7816 Part 1, 2, 3, (T=0, T=1) 1 x ID-1 Card Slot 3 x ID-0 SAM Slots 9.6 kbps up to 115.2kbps Class A & B Contactless Reader Standard Card Type FeliCa / HID iclass Card Transmission Rate Camera Resolution 5 Megapixels (LED Flash) Fingerprint Sensor Sensor Resolution Active Area Supported Template Template Formats 1D/2D Barcode Scanner (Optional) Supported Standards Optical sensor 500dpi 14mm x 22mm Sagem Algorithm Morpho Proprietary, ISO 19794-2, ANSI/ INCITS 378, RAW/Bitmap, WSQ (Optional) EAN8, EAN13, CODE39, CODE128, Interleaved 2 out of 5, PDF417, DATA MATRIX, QR-Code, Aztec GPS (Optional) A-GPS 5 Basic Installations The Battery The battery has been partially charged at the factory, however please charge it for 4 hours before switching on the device for the first time. Guideline for Installing SIM/SAM card WARNING Keep all SIM cards out of the reach of children. The SIM card and its contacts can be easily damaged by scratches or bending. Be careful when handling, inserting or removing the card. Before installing the SIM card, always make sure that the device is fully charged as the application will not work properly with insufficient amount of power. To insert SIM card 1) Close all programs and switch off the device. 2) Remove the hand strap. 3) Unlock both wing locks. 4) Remove the Battery cover. 5) Remove the Battery pack. 6) Unlock the SIM Slot and pull back the cover for insertion. 7) Ensure that the cut corner faces top right and the gold contacts of the card is facing downwards into the device. SAM A
(Slot 0) SAM B
(Slot 2) SAM C
(Slot 3) SIM 8) Push down the SIM slot cover and slide outward to lock it. 6 9) Place the battery back followed by battery cover. 10) Push the wing lock to secure the battery cover and finally install the hand strap back into the hand strap tab. To insert SAM card 1) Insert the SAM cards into slot 0, 2, 3. 2) Insertion steps are the same as SIM card insertion steps. 3) SAM card is for internal security. Guideline For Installing Micro SD Card 1) Close all the programs and switch off the device. 2) Remove the hand strap. 3) Unlock both wing locks. 4) Remove the battery cover. 5) Remove the battery pack. 6) Unlock the Micro SD slot and pull back the cover until easy for insertion. 7) When inserting the Micro SD card, ensure that the gold contacts of the card is facing downwards into the device. Micro SD 8) Push the Micro SD slot cover down and slide inward to lock it. 9) Place the battery back followed by battery cover. 10) Push the wing lock to secure the battery cover and finally install the hand strap back into the hand strap tab. 7 First Time Use Screen Calibration Once the charging has completed, turn on the device by pressing the power button. On the first time basis, it is advisable to calibrate the screen by going to:
-> Settings -> Control Panel -> Stylus. Carefully press and briefly hold the stylus on the center of the target. Repeat as the target moves around the screen. Press the ESC key to cancel Follow the cursor and tap on it. Kindly set the Time, Date and Time Zone as the default time, date and time zone differ from place to place. Time, Date and Time Zone configuration Go to
-> Settings -> Control Panel -> Date/Time to set the Time, Date and Time Zone. 8 Touch Screen Operations The following defines the various operations that the user can perform with the stylus. Tap Tap once to select a program Double Tap Drag Tap the item twice to open or execute a program Hold the stylus on the screen to drag objects Using the Stylus The stylus is housed inside the stylus holder at the right corner of the device. IMPORTANT Avoid misplacing the stylus by always storing it in the stylus holder when not in use. Avoid breaking the tip of the stylus. Use only the stylus that comes with the ST5e or some other stylus type instrument with a soft, blunt point to perform touch screen operations. Never use a pen, pencil, or other sharp writing element. 9 Start Menu The ST5e is pre-installed with a collection of useful programs such as Microsoft WordPad and other customized programs. Tap the START button to explore the list of programs available for selection. Taskbar Items The following are the standard status icons that will appear on the taskbar. Status Icon Meaning Start Menu, Tap to switch to a program Indicate device connected to PC ActiveSync Battery is charging Battery is fully charged Battery is low Tap for display or hide keyboard, tap and hold to choose other input method Quick launch menu 1 a A Current Keypad Input method 10 Shell taskbar The taskbar appears on the top of ST5es screen. 1 2 Start button 1 2 Active application 3 4 Direct Connection 5 WI-FI Connection 6 Keypad Input Method Left arrow Power icon 7 Bluetooth Network 8 9 Right 10 Time , Date and Time Zone 3 5 7 9 11 4 6 8 10 12 Single tap to display the Start menu Display the latest application running Single tap to see the hidden icon on the left Double tap to execute the direct network status dialog Double tap to execute the WI-FI network setting Single press on the ALPHA to change mode of input by keypad Numerical (1) , Small Alphabet (a) , Capital Alphabet(A) Single tap to execute Bluetooth network setting Single tap to display the power status on users ST5e Single tap to see the hidden icon on the left Single tap to display the time, date and time zone menu 11 Software Input Panel Single tap to display or hide the Keypad
(SIP) 12 Application switching NOTE:
Single tap to display all the active application An internal battery icon appears in the status icon. See Taskbar Item for more information about icons. Messages also appear on the screen to warn user when the battery power is critically low. User can check the current battery level at any time by tapping Panel -> Power to display Power Properties.
-> Settings -> Control 11 Software Input Panel (SIP) Tap the SIP icon on the taskbar as shown below to use the input panel. Tap on the SIP icon again, to hide the input panel. 12 Keypad Controls and Interfaces Alpha Numerical Keypad Clear entry or Keypad input Backspace function mode Power on, Wake or Suspend Nav. Left & Right Enter Nav. Left & Right Navigate to left or right. Enter button To open a selected program. Power button To turn on/off the device. CLR To clear entry or use as backspace function. Alpha numerical keypad To key in preferred character or command. Alpha button To change the mode of entering characters by keypad. Sequences of the modes are Numerical (1) , Small Alphabet (a) , Capital Alphabet(A). 13 Customizing ST5e The setting of ST5e can be customized to suit the users specific requirements. For e.g. setting password to protect the devices information, LCD Brightness and many more.
-> Settings -> Control Panel, to view the menu as shown in the figure above. Tap on 14 LCD Brightness Control Adjusting Display Brightness Use the following operations to adjust the display brightness.
-> Settings -> Control Panel -> Dimming Setting A screen box will appear. Make sure it is on the LCD Light tab. Tap the dark or bright tab to control the brightness of the screen. 15 Adjust how the Screen Light can be Turned On Use the following operations to adjust the display brightness.
-> Settings -> Control Panel -> Dimming Setting Select the LCD Light tab. There are two options available to turn on the screen light. Touch screen or Keypad - to turn on the light of the LCD by touching either the Touch Screen or Keypad. Touch screen only - to turn on the light of the LCD by touching either the Touch Screen only. Kindly set the duration for LCD Light to hibernate. (5 seconds to 5 minutes) 16 Keypad Light Control Light Emitting Duration Use the following operations to adjust the display brightness.
-> Settings -> Control Panel -> Dimming Setting Select the KeyPad Light tab. Kindly set the duration for keypad light to hibernate. (5 seconds to 5 minutes) Keypad Light Use the following operations to adjust the display brightness.
-> Settings -> Control Panel -> Dimming Setting Touch screen or Keypad - To turn on the light of keypad by touching the screen or pressing the keypad. Keypad only - To turn on the light by pressing any key in the keypad. Keypad Light Control Use the following operations to adjust the display brightness.
-> Settings -> Control Panel -> Dimming Setting Select ON when LCD or Keypad pressed to enable the previous option. Select Always OFF, the keypad light will be turned off the completely and select Always ON, the keypad light will be turned on all the time until the device is suspended. ON when LCD or Keypad pressed - To turn on the light of keypad by touching the screen or pressing the keypad. Always OFF To turn off the keypad light completely. Always ON To turn on the keypad light permanently. 17 Power User can check the power status of the main battery by clicking on the Power Properties icon in the control panel. In the power properties menu, in the Battery tab, user can select their preferred option; Always show icon on the taskbar or Show critical battery Warning, which means a window, will pop out when the battery is low. 18 System Power States The OS (Operating System) has 4 different power states as for the internal power manager state machine. The state transition reflects on the system conditions as stated below:
a) User activities b) System activities c) Application requests d) Timers The four states are:
On - In this state, the device is active and user can use all the different peripherals, and consequently the battery consumption is on maximum level. User Idle - When the user is not using the device actively, the display backlight intensity will decrease and the unused peripherals will be disabled to reduce power consumption. System Idle -When the system is inactive, the power manager switches to this state. Suspend In this state, the device will consume minimal power. Therefore, the device cant be used. The processor clock will be weak and the peripherals will be turned off automatically. The transition from On to User Idle and User Idle to Suspend is done once the timer expires. The timer value can be set through the power applet in the control panel. Display The resolution for the device is 640x480 pixels. To customize the display screen, go to Properties.
-> Settings -> Control Panel -> Display 19 Mouse In the Mouse Properties, user can set and test the sensitivity and speed of their mouse for better usage. Keyboard In the Keyboard Properties, user can customize the repeat delay, repeat rate and character repeat. 20 Audio Volume User can set the speaker volume and enable sounds for warning, application and notification in the Volume and Sounds Properties, while customizing the volume on the volume tab. Stylus Properties User can recalibrate the sensitivity of the stylus as well as checking on the mouse double-tap setting under Stylus Properties. 21 Network & Dial Up Connection When tapping at the Network and Dial-up Connection, a default connection will be created as USB ActiveSync. User can also view the entire network their handheld is connected to under this setting. Regional And Language Setting Set the local language, number, current time and date accordingly under Regional and Language Setting. 22 Owner Properties Depending on Users preferences, personal information and network ID can be inserted under Owner Properties. PC Connection PC Connection is to enable the device to communicate directly with personal computer or other communication devices. The default is set to USB ActiveSync. However, if there is more than one connection being created on the "Network and Dial-Up Connection", user needs to change the connection settings before linking any other communication devices. To check the status of PC connection, go to
-> Settings -> Control Panel -> Network and Dial-up Connection -> USB Default. 23 For PC Connection Properties, go to
-> Settings -> Control Panel -> PC Connection. Storage Properties
-> Settings -> Control Panel -> Storage Manager. In the Storage Properties, Go to user can manage the storage by formatting, dismounting or creating a new partition on it. 24 System Properties User can view the system information, device name and copyrights information under System Properties. Password Properties In the Password Properties, user can set the Password to maintain privacy or prevent others from accessing the device. 25 Screen Rotation This feature allows user to enable the auto rotation setting. Taskbar & Secure Shell Secure Shell enables user to control the accessibility of Control Panel. The default password is 123456. 26 Input Selection Panel In the Input Selection Panel, user can change the current state of Input Panel by tapping once on the SIP at the taskbar. Date & Time Properties Allow user to configure the date, time and time zone. It also comes with the daylight saving feature. 27 Internet Options Allow user to configure the network connection setting and the default homepage. Remove Programs Allow user to remove any unwanted installed programs. 28 Internet Explorer Internet Explorer makes it easier to get the most from the World Wide Web, whether to search for new information or browsing through websites. In the control panel menu, under the internet option, user may customize the appearance of the browser when the program is launched. The start page of Internet Explorer. The View menu allows user the option of limiting the taskbar to be shown and font size. User could also go to a webpage, by typing the internet address for example, www.iris.com.my in the address bar and then click the Go button. The Back and Forward buttons will enable user to return to the previous page or view the next page. The Stop button will enable user to stop viewing a page when the webpage is taking too long to open. When receiving a message that a web page cannot be displayed or to make sure user has the latest version of the page, click the refresh button. 29 Features Getting Connected All the features and peripherals of ST5e can be accessed and enabled by getting into the Power Control screen. The following pathway would lead the user to the Power Control screen.
-> Settings -> Control Panel -> Power Control Wireless LAN (Wi-Fi) Usage ST5e is equipped with built-in wireless LAN that enables user to access Internet through available wireless networks. To turn ON the wireless LAN, go to Power Control screen as shown below and tap once on the WiFi icon. The icon should be in green when it is turned ON. HRTSeries The network icon will pop up on the shell taskbar. Double tap on the icon to configure the WiFi network properties. On the Wireless Information tab, check on the Notify me when new wireless networks are available. Select the prefered network, press Connect and a 30 Wireless Network Properties window will pop out. Enter the Network key if needed, else press OK. 31 Bluetooth Usage Bluetooth Manager allows user to scan, pair and link with other Bluetooth devices. The Bluetooth feature of the device must be turned ON in order to do the scanning. For the steps on turning ON the Bluetooth feature, please refer to the manual below. To access Bluetooth function, go to
-> Settings -> Control Panel -> Power Control and press once on the Bluetooth icon to activate it. If the icon is green, it is turned ON and if the icon is red it is OFF or inactive. HRTSeries User may scan and pair with other Bluetooth devices such as mobile phones, PCs, laptops and other Bluetooth enable device. 32 In order to connect to another device, user needs to run a scan for the device. The following are the steps to establish a Bluetooth connection successfully. 1) Go to
-> Settings -> Control Panel -> Bluetooth Manager. Double tap on the Bluetooth Manager icon. 2) The Bluetooth Manager window will appear as below. No connection established Minimizes Bluetooth Manager Window into the taskbar 33 3) Make sure the Bluetooth pairing device is within the coverage range. Tap Scan to start scanning. 4) Tap STOP if you would like to stop the device from scanning. 5) Select the device that wish to be connected and tap Connect. 6) A Print UI window will pop up if the channel is not stated. Insert channel between 1 to 30, channels below 1 or above 30 are bad channels. Then press OK. Channel between 1 to 30 7) An Authentication Request window will pop up. Enter the same PIN for both devices. Once the device is successfully connected, a window will pop up. Tap OK to complete the connection. Name of the pairing device 34 8) Click once on the Bluetooth Manager icon, to check on the connection. This is the address and channel of the device that is connected to the device 9) Click once on the Bluetooth Manager icon, to reopen the dialog. A device is connected to ST5e by Virtual COM. In order to connect with other device, ST5e needs to be disconnected by pressing Disconnect. 35 10) Please make sure that the Bluetooth Manager icon remains at the taskbar. If the icon disappears, launch the program again. There are few scenarios that the taskbar icon may disappear:
Close button, is pressed. This will cause the entire application to close. Soft reset button is pressed. All the running application will end. 11) If the device is suspended, make sure the Bluetooth feature is turned ON again. 12) By pressing the soft reset button, all the applications will end. Make sure the Bluetooth feature is turned ON again. It will then connect to the last connected device prior to the soft-reset provided it is not disconnected. 13) The connection will remain active until the device is disconnected or is being hard-
reset, which is Restore to factory setting. 36 GSM Usage
-> Settings -> Control Panel -> Power Control and tap once on To access GSM, go to the GSM icon to activate it. Icon is Green ON Icon is Red OFF The GSM status will be displayed at the top right of the device via a GSM icon. In order to check the service and coverage of GSM, go to
> Taskbar Setting. Check on the Show GSM icon on Taskbar.
-> Settings -> Control Panel -
37 If there is no SIM card inserted into ST5e, there are two icons shown on the taskbar. No GSM service No SIM card inserted Before GSM module is configured, this icon,
- GSM OFF will appear on the taskbar. After the GSM module is configured, two new icons will appear on the taskbar. Both of the icons show the status of the GSM module of the ST5e. 2G Service Coverage of GSM 3G Service Empty means low while full means excellent 38 Using the Contact Card Reader 1. Insert the smart card (chip facing inwards) into the contact card slot which is located by the right side of the device. Contact card Slot 39 Using the Fingerprint Sensor 1. 2. 3. When the optical finger print sensor is ready, the sensor window will light up. Place the finger on the centre of the finger print sensor window. Wait and remove the finger only when the sensor light turns dim. Using the Barcode Scanner 1. Trigger the barcode scanner. 2. Aim the scanner towards the barcode to do read it. 3. Once done, the scanner will be automatically turned off and result will be displayed. 40 Appendix: Troubleshooting Guide Reset the ST5e and clear memory To Reset the ST5e If the ST5e responds slowly or freezes, try resetting it. Please note that any unsaved data in the open windows may be lost during the reset. Use the stylus to press the Reset button. Restore to Factory Setting 1. Turn the ST5e ON. 2. Press and hold the Side Button (right) button, and use the stylus to press the Reset button. A window as below will be shown on the screen. 3. Press the Side Button (left) button to scroll, select Restore to Factory Setting. 4. Press the Side Button (right). Then, select Yes by pressing Side Button (right) again. 41 If ST5e runs out of Power Low Battery Power When battery is running low, user will see a low battery icon in the navigation bar. Kindly replace or recharge the battery as soon as possible. Running on low battery power will affect the devices peripheral performance. Hence, the device will automatically shut down when the battery power is critically low. Under normal conditions, a fully charged battery can be used for long hours. WARNING If the battery is low during handheld operation, user could face the risk of losing the data in ST5e. Use External Power Whenever Possible Establishing a remote connection (some modems use a lot of power). Using the backlight feature of users ST5e display. Use the AC adapter to plug the ST5e into external power whenever possible, especially during:
Connecting to a desktop computer. Shorten the Auto-Suspend Time ST5e will automatically suspend after a predefined idle period. Maximize the batterys lifespan by shortening the idle time. Tap and then Settings. On the Control Panel tab, tap Power, and then adjust the Schemes setting. Turn Off the Sounds when Necessary ST5e produces sounds in response to a number of events, such as warnings, appointments, and screen taps or when user press hardware-button. To optimize batterys lifespan, turn off any unnecessary sounds. Tap and then Settings. On the Control Panel tab, tap Volume
& Sounds and clear check boxes on the Events, Application, keyClicks and Notification tabs. Turn Off the Unused Peripherals Turning OFF all the unused peripherals in the device will save and optimize the batterys lifespan. To turn OFF all the unused peripherals, tap and then Settings. On the Control Panel tab, tap Power Control and switch OFF all the unused peripherals. 42 If ST5e runs out of Memory Memory of ST5e is shared between storage memory and program memory.Storage memory is used to store the information created and programs installed. Program memory is used to run programs in the ST5e. The ST5e automatically manages the allocation between storage and program memories. However, in some situations, such as when memory is low, the ST5e may not be able to automatically adjust the allocation. If user receives a message stating that storage or program memory is unavailable, try the following solutions. Storage Memory-Secure Digital (SD) Storage Card 1. 2. 3. 4. 5. 6.
, Program and then Windows Explorer. A folder named Storage Card will Move data to a Secure Digital (SD) Storage Card. Tap appear once the SD memory card is inserted. This folder will disappear automatically once the card is taken out from the slot. Move any file or data into the Storage Card folder for backup purposes. Files or data save in the SD card can be opened in any other SD card reader or computer. Files copied from computer can also be opened as it does not exceed the memory of the device. in the device, as long Program memory 1. 2. 3. Stops inactive programs. Clear storage memory as described in the preceding section. Reset the device, as described in Reset the ST5e. Screen is Blank If the ST5e does not respond when user presses the Power button, press and hold the button for a full second. If this does not work:
1. Make sure users battery cover is locked and all expansion slots are secured. 2. Plug the ST5e into AC power. 3. Change or recharge the main battery. Screen is Dark Prolonged exposure of the ST5e to direct sunlight may cause users ST5e screen to be temporarily dim. This is a normal case for LCD screens and it is not permanent. 43 Inaccurate Response to Stylus Taps and then Settings. On the Control Panel, tap Stylus. In the Stylus Properties, Tap choose Calibration. Tap Calibrate. Routine Maintenance This section provides routine maintenance guidelines. Following these guidelines, helps to ensure the lifespan of ST5e and reduces the risk of damage. Routine Care To keep ST5e in good condition and working properly, follow these guidelines:
Keep ST5e away from excessive moisture and extreme temperature. Do not expose ST5e to liquids or precipitation. Do not place anything on top of ST5e to prevent damage to the screen. Store ST5e in a protective case when not in use. Clean ST5e by wiping the screen and the exterior with a soft, damp cloth moistened only with water. To reduce the risk of electric shock or damage to the internal components, do not spray liquid directly on the screen or allow excess liquid to drip inside the ST5e. Using soap or other cleaning products on the screen may discolor and damage the screen. 44 Avoid exposing ST5e to direct sunlight or strong ultraviolet light for extended periods of time. Also avoid scratching the surface of the screen and banging it against hard objects. Use only ST5es stylus to prevent scratches on the screen. Battery Guidelines Follow local regulations regarding the safe disposal of ST5e. Vendors can advise user on local regulations and the existence of any battery disposal programs in the operation. ST5e should not be disposed along with the general household waste. In order to forward it for recycling or proper disposal, please use the public collection system or return it to IRIS or the authorized partners. Travel Guidelines For safety and convenience when traveling with ST5e, follow these guidelines:
Back up data before travel. Take a backup copy. Disconnect all external equipment from ST5e. Take along the AC adapter and new batteries. Hand-carry ST5e in a protective case. Do not check in with luggage. Beware of potential effects of airport security devices on the ST5e. There are three types of airport security devices: X-ray machines, magnetic detectors (the device passenger walks through for security scanning), and security magnetic wands. The device can be sent through airports X-ray machines. However, it is recommended that the device does not send through the magnetic detectors or expose it to security magnetic wands. Check with the airline if there is a plan to use the device on the plane. In-flight, the use of electronic devices is at the discretion of the airline. International Travel Before traveling internationally with ST5e, be sure to:
Check local customs regulations on wireless devices. 45 Shipping Guidelines When shipping the ST5e, follow these guidelines:
Safeguard data by making a backup copy. If shipping the backup copy, be sure that the medium (diskette, tape, or SD card) is not exposed to electrical or magnetic impulses while stored or in transit. Turn off ST5e and disconnect all external devices. Pack ST5e and all external devices (such as the cradle, cords, and cables) in their original packing boxes or in similar packaging with sufficient packing material to protect them. 46