1. Product introduction This product is designed for engineering vehicle. Main function include: Operation data collection, control parameter download, GSP features and Irootech cloud communication. 2. Product specification 3.1 Connector instruction:
3.1.1 AreaDebug Area 1. Internet 2. USB 3. Reset 1 2 3 3.1.2 Area LEDs Area 4. HW parameter Power Supply Power Consumptio sleep mode Power Connector 9-36V DC
<5mA (24V) TE 1411001-1 Load Dump Protection automotive standard Operating Temperature
-40~+85 Storage Temperature
-40 to 85C Cooling No active cooling EMClock Encryption LED Status OS EMCC Real Time Clock TLS 1.2 1 Power, 2* RG Linux CISPR25 ISO 11452-2 5. Antenna Characteristics 5.1 Antenna Antenna model DAS159525*25*4mm) 5.3 LTE Antenna Frequency Range B2 B4 B5 B12 1850-1910MHz 1710-1785MHz 824-849MHz 699-716MHz V.S.W.R Impedance 3.5:1 50 ohm Gain 1.51dbi@700 0.46dbi@708 0.51dbi@716
-1.40dbi@824 -0.76dbi@836 -0.21dbi@848 0.83dbi@1710 1.55dbi@1746 1.65 dbi@1785 0.55dbi@1850 -0.68 dbi@1880 -1.43dbi@1910 Relative Humidity 10 ~ 95% RH @ 40C, non-condensing GPS: 1575.42MHz1.02 MHz/B1:1561.0982.046 MHz Polarization linear Model : HI1503-DC-H Product Manual 2.2 Product weight: 360g
(not include other accessories in packaging box ) 3. Product connector ProducerIrootech Technology Co.,Ltd. AddressRoom 606, Floor 6, Building 5, Eastern Yard 10, Xibewang East Road, Haidian District, Beijing, China 1. Power light RedNormal working 2. Online or offline light: GreenHave connected with 4G 3. Data light: Green twinkle: Data is uploading or downloading 1 2 3 3.1.3 AreaAntennas Area 1. 4G Diversity antenna 2. GPS antenna 3. 4G Main antenna 1 2 3 3.1.4 Area : Data Connector Area 7 5 3 1 8 6 4 2 1.Power in +
2.Power in -
3.DI(Reserved) 4.DO(Reserved) 5.CAN1 - L 6.CAN1 - H 7.CAN2 - L 8.CAN2 - H 4G Module Frequency Range GLONASS: 1602MHz6 MHz Network Access FDD LTE: B2/B4/B12 SIM Communication GNSS CAN WCDMA: B2/B4/B5 1 * SIM Chip BLE 4.0 GPS, Glonass, Beidou Cold start < 40s Hot Start <12s 2 * CAN bus 2 * ISO 11898-2 / -5 CAN Connector TE 1411001-1 CPU Memory Flash Freescale I.MX6UL ARM Cortex-A7 528MHz DDR3L 128MB eMMC FLASH 4G Method to updating software 4G Network / USB port Mechanical IP Class Antenna Shock 400m/S IEC60068-2-27 IP67 External Antanna Connector SMA V.S.W.R Band Width Impedance Gain 1.5:1 GPS: 10 MHz / BD: 10 MHz/ GLONASS: 20MHz 50 ohm 5dBic Based on77cm ground plane Polarization RHCP 5.2 LNA Frequency Range GPS: 1575.42MHz1.02 MHz/B1:1561.0982.046 MHz GLONASS: 1602MHz6 MHz DC Voltage Gain Output VSWRMAX Noise Figure(MAX) DC current(TPY) 3.3V 28dB 2.0 1.5 9.03mA (3.3V) Direction Omni-directional 6. SW function:
6.1 Support uploading Vehicle controller data to Irootech SAAS platform. 6.2 Support downloading control parameter from Irootech SAAS platform to vehicle controller. 6.3 It can save the operation data into flash if the the saved data to SAAS platform when 4G resumed. T-box offline, and upload 6.4 Support collecting the error code of vehicle controller. 6.5 Support OTA upgrade. 6.6 Support GPS located. 7. Certification This product has passed FCC & CE, etc. 1 2 3 4 5 6 FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
receiver is connected. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Reorient or relocate the receiving an Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. tenna.