FCC ID: 2AVK6-MR527E01 RFID Reader Module

ISGUS Mifare Reader ISGUS Mifare Reader Integration Instructions Integration Instructions 1/6 Purpose This document describes the measures required to integrate the ISGUS Mifare Reader into an ISGUS terminal and which regulations must be observed and fulfilled in order to introduce the terminal in the USA and Canada. Product description The ISGUS Mifare Reader is a RFID identification system in form of a pluggable module. The module consists of the OEM radio module PRIMO340 (manufactured by phg) and a PRIMO340 adapter with integrated loop antenna and antenna tuning network. ISGUS Mifare Reader Instructions Integration OEM radio module PRIMO340 PRIMO340 adapter Loop antenna 10-pole and 4-pole pin contact strips, 12 mm 2/6 Intended use The reader is intended exclusively as a reading module for ISGUS time recording and access control terminals (host devices). Other areas of application deviating from this are considered contrary to the designated use. Regulations The ISGUS Mifare Reader has been tested according to FCC and Industry Canada (IC) regulations for module approvals. FCC ID: 2AVK6-MR527E01 IC: 25797-MR527E01 PMN: ISGUS Mifare Reader HVIN: MR527E01 FVIN: 68075J Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. User manual warnings and statements Provisions, instructions and warnings that must be included in the User Manual of the host device. FCC:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Canadian Radio Certification:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. ISGUS Mifare Reader 3/6 Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 4/6 Testing of host device with approved reader The manufacturer is responsible for ensuring that the host device has been tested and complies with the following rules and regulations. FCC47 CFR Part 15: Radio Frequency Devices (Subpart B and Subpart C) RSS-210 Issue 9 (10) ICES-003 Issue 6: Spectrum Management and Telecommunications. Interference-

Causing Equipment Standard. Information Technology Equipment (Including Digital Apparatus) Limits and Methods of Measurement Labeling of the host device Label on the case:

Contains FCC ID: 2AVK6-MR527E01 Contains IC: 25797-MR527E01 Installation The ISGUS Mifare Reader is pluggable connected to the reader adapter board. ISGUS M ifare Reader Reader adapter board ISGUS Mifare Reader 5/6 Installation and integration of reader adapter board into IT 82xx (Fig. IT 8210):

ISGUS Mifare Reader Reader adapter board with ISGUS Mifare Reader Copyright ISGUS GmbH 2020 Edition:

002US.0220 00 MA 1ZH ISGUS GmbH Oberdorfstr. 18 22 D 78054 Villingen-Schwenningen www.isgus.de info@isgus.de ISGUS Mifare Reader 6/6

-ASGUS Oberdorfstr. 18-22 D - 78054 Villingen Schwenningen FCC ID: 2AVK6-MR527E01 IC: 25797-MR527E01 PMN: ISGUS Mifare Reader HVIN: MR527E01 S/N: MR1-000001 PU EYAL

TESTLAB Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 20 February 2020 Product Certification K6nigswinkel 10 D 32825 Blomberg FCC ID: 2AVK6-MR527E01 To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Xl Schematics LI Parts List Block Diagram OO Tune-Up Info XI Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable LC] External Photos LI Test Setup Photos C1 Internal Photos CL] Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Sabrina Berghahn Authorized Agent

PHOENIX TESTLAB GmbH Product Certification Koenigswinkel 10 D 32825 Blomberg To Whom It May Concern:

Date: 20 February 2020 Subject: REQUEST FOR FCC MODULAR TRANSMITTER APPROVAL FCC ID: 2AVK6-MR527E01 We, ISGUS GmbH, hereby request a modular / limited modular approval. In CFR47 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide there are following eight numbered requirements defined:

1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield but must be on the module assembly. Response: Fulfilled please refer to the external photo exhibit. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Response: Fulfilled please refer Block Diagram, Schematic and Operational Description. 3. The modular transmitter must have its own power supply regulation on the module. Response: Fulfilled please refer to the Block Diagram, Schematic and Operational Description. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Response: Fulfilled please refer to photo exhibit showing the permanently attached loop antenna. 5. The module must demonstrate compliance in a stand-alone configuration. Response: Fulfilled please refer to the test report and test setup photos. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number (KDB 784748). Response: Fulfilled please refer to the label location and integration manual exhibit. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. Response: Fulfilled please refer to the test report and integration manual exhibit. 8. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Response: Fulfilled as devices subject to 15.225 are categorically excluded from this requirement. Although the requirements are fulfilled, the Grantee hereby declares that this modular transmitter will be exclusively integrated by the Grantee himself into his own products and is not intended for sale to third parties. Yours sincerely, Sabrina Berghahn Authorized Agent

ISGUS GmbH Oberdor(str. 18-22 78054 Villingen-Schwenningen PHOENIX TESTLAB GmbH Prod uct Certification Department Koenigswinkel 10 32825 Blomberg, Germany Power of Attorney To Whom lt May Concern:

SGU Zeiterfassung WebServices Zutnttskontrolle Betriebsdatenerfassung ERP-Integration Personaleinsatzplanung Dienstplanung Geschftsleitung ISGUS GmbH Please be advised that we, ISGUS GmbH, authorize the following persons from ~ 18-22 PHOENIX TESTLAB GmbH:

Villingen-Schwenningen Tel. +49 7720 393-0 Fax +49 7720 393-1 84 info@isgus.de www.isgus.de Registergericht Freiburg im Breisgau HRB 600260 Geschftsfhrer:

Stefan Beetz Sabrina Berghahn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters in the following coutries:

USA Canada PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following name device:

Product description:

FCC ID: 2AVK6-MR527E01 IC: 25797-MR527E01 HVIN: MR527E01 PMN: ISGUS Mifare Reader FVIN: 68075J Unless future correspondence from ISGUS GmbH please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the above mentioned products to 6 months after the signatory date of this authorization. Contact person Position in the company Date of sianatory J

Mr. Stefan Beetz Managing Director 13.02.2020 Oberdorfetrasse 18-22 SGUS GmbH 78054_Villingen-Schwennlngetl Signatory

(signature of the applicant)