Configuring Windows XP before Usage Important Safety Instructions When using your pen mouse equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. 2. 3. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in Read and understand all instructions. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. a wet basement or near a swimming pool. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damag e to the product. 5. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contra ctor when some service or repair work is required. Opening or removing covers may expose you to dangero us voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequentl y used. Unplug this product from the power source and refer servicing to qualified service personnel under the foll owing conditions:
7. A. If liquid has been spilled into the product. D. If the product does not operate normally by following the operating instructions, Adjust only those controls If the product has been exposed to rain or water. that are covered by the operating instructions. Improper E. Adjustments of other controls may result in damage and will often require extensive work by a qualified tec hnician to restore the product to normal operation. F. If the product has been dropped or the cabinet has been damaged. G. If the product exhibits a distinctive change in performance. FCC Notice THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. NEW PEN and MOUSE Operating Guide. Holding Pen and mouse Installation of Receiver 1. Plug Receiver into USB Port with Computer 2. If Receiver is possible to use your computer, Receivers LED is flashing one time. 3. Press LED light button (See Page 5) Check that LED is turn on IF LED is not on, your Receiver is reverse plugged Docking Pen and mouse Battery indicator Low battery : Pens Led is Flashing While charging : Pens Led is on Full charge : Pens Led is off Power Save 1. Goes power down mode without any action during 30 second. 2. When Pen is docked with Receiver, goes in to power down 3. Press and Hold button (see page5) over 3Second, goes in to power down When Pen and Receiver is docked, Automatically power is off. To restart pen and memory mode, Press power button (See page 5) over 3 seconds Configuring Windows XP before Usage You can use Pen&Mouse as a natural pen, such as drawing a graph or write a text and sign. When Pen mode is selected, you can feel more comfortable and precisely drawing or writing by changing of setting of control panel. (This setting is only used in Windows XP version.) 1. Press START button select control panel select Printers and other Hardware select mouse 2. It will appear on your mouse properties and select pointer options tab You will see the Enhance pointer precision option. Please cancel the checked indication to use more comfortable using the Pen and mouse You can use penandmouse as a Mouse setting the acceleration faster on a mouse mode. you can adjust the acceleration to which you feel most comfortable with. NEW PEN and MOUSE Quick Guide 1 1. Pen and Mouse Usage 1-1 Separate Receiver and Pen 1-2 Plug Receiver into USB Port with Computer 1-3 If Receiver is possible to use your computer, Receivers LED flashing one time Power ON Press button to re-power on over 3 seconds DC Jack IN
<Charging>
RECEIVER Registration 1. Press and button at a time, Pens LED is flashing continuously 2. Press Receivers LED light button, Receivers LED is flashing one time. LED light button
<Flash Lantern>
Laser Pointer button Text size &
Point size adjustment Pen&Mouse Mode Power Off/On Key Scroll center Right Button Memory Pen mode :
Press the Button over 3 second Scroll <Wheel> Button Pen and Left Button 2. Memory pen Mode Usage Enter Memory mode. 2-1 Press and hold button over 3second The pens LED is flashing each 1 second 2-2 Press button, The LED is more fast flashing 2-3 write a text or drawing you want
(Tip : more convenient write during open paint Program) 2-4 press button to Save the data The pens LED is flashing each 1 second again Play memorized data 2-5 Plug Receiver into USB Port with Computer 2-6 Press button to play data which was LAST memorized 2-7 Press button to play data which was OLD memorized Delete Memory data 2-8 Press button to delete all data over 5 second The pens LED is off and Exit in memory mode. Transfer Data in to PC The data which was last memorized Save memory DATA Transfer Data in to PC The data which was OLD memorized Memory Pen mode :
Press the Button over 3 second All Delete Press the Button over 5 second Usage New Pen and Mouse while Charging Usage New Pen and Mouse without Charging cable Registration 1. Press and button at a time, Pens LED is flashing continuously 2. Press Receivers LED light button, Receivers LED is flashing one time. PEN and MOUSE Quick Guide 2 Example of practical Using Pen&Mouse While you are doing a presentations with Microsoft PowerPoint TM you Can write your comment on the fly And grab the attention of audience. Also, Press scroll button! while you stand on presentations, you can page up and down alone . Drawing pictures using Pen&Mouse on Microsoft Paint Presentations and Lectures Finger Note : Create memos and highlight over any Program. This Program allows user to can open MS Powerpoint,word,excel by slides. Also, User can save slides with created memo (image file format). Especially, this program is very useful when presentation. Please visit ISV CO.LTD. Website for more information and download Finger Note. http://www.penandmouse.com Using a Finger note
(Bundled software) Using a Msn messenger Graphic tool Using a Mini homepage or blog graphic tool Sign on your document