STB1132-25 Module Specification Ver1.0.0 2016-2017 ITON Technology Corp. This document contains information that is proprietary to ITON Technology Corp. This document is commercially confidential and must NOT be disclosed to third parties without prior consent. The information provided herein is believed to be reliable. But production testing may not include testing of all parameters. ITON Technology Corp. reserves the right to change information at any time without notification. iTONTechnologyCorp. STB1132-25 Contents Version:.................................................................................................................................................3 1. Overview..........................................................................................................................................4 1.1 Brief........................................................................................................................................ 4 1.2 Features.................................................................................................................................4 1.3 Application........................................................................................................................... 4 2. Hardware System.......................................................................................................................... 5 2.1 Function block.....................................................................................................................5 2.2 PIN assignment................................................................................................................... 6 2.3 PIN description....................................................................................................................6 2.4 Schematic diagram............................................................................................................ 7 2.5 Electronic parameter..........................................................................................................8 2.5.1 Basic parameter....................................................................................................... 8 2.5.2 Maximum parameter..............................................................................................9 2.5.3 Working Voltage......................................................................................................9 2.5.4 Working Current......................................................................................................9 2.5.5 External Crystal...................................................................................................... 10 2.5.6 TX parameter.......................................................................................................... 10 2.6 Dimensions.........................................................................................................................11 2.6.1 Mechanical dimensions....................................................................................... 11 2.6.2 Layout reference dimensions............................................................................................12 3. Process parameters.................................................................................................................... 13 3.1 Recommended temperature curve..............................................................................13 4. Package information..................................................................................................................13 5. Please be noticed following information and instructions should be placed in the end-users operating manual................................................................................................... 14 6. FCC Certification Requirement:...............................................................................................16 http://www.sziton.com/
2 / 16 iTONTechnologyCorp. STB1132-25 Version:
Data Version 2017-02-15 V0.01 Draft 2017-03-07 V0.02 2.3 PIN description Revised 2.2 PIN assignment 2.4 Schematic diagram 2017-3-20 V0.03 Revised DIO12 description 2017-4-13 V1.00 Released version Edit Kain Kain Kain Kain http://www.sziton.com/
3 / 16 iTONTechnologyCorp. STB1132-25 1. Overview 1.1 Brief Bluetooth module STB1132-25 base on ST newest LE4.1 chipset BlueNRG1, establish a bidirectional data transfer channel through UART interface between mobile phone and client's MCU. According to the content of commands list, Client's MCU may send the corresponding commands to set the Bluetooth module into different condition, or send or receive data on GATT layer, Bluetooth module's status also can be read through commands. 1.2 Features Support LE4.1 Support OTA upgrade Support UART upgrade Stable and reliable performance Support UART command Up to 8dBm TX power 1.3 Application Bluetooth Printer/Scanner Mobile payment Wireless health & fitness equipment Wireless toys Smart Household Electric Appliances http://www.sziton.com/
4 / 16 iTONTechnologyCorp. STB1132-25 2. Hardware System 2.1 Function block STB1132-25 http://www.sziton.com/
5 / 16 iTONTechnologyCorp. STB1132-25 2.2 PIN assignment 2.3 PIN description No. 1 2 3 4 5 6 7 8 9 10 11 12 Name SXTAL0 SXTAL1 GND DIO6 DIO7 GND Description 32.768KHz Xtal 32.768KHz Xtal POWER I/O I/O POWER SWCLK/DIO9 Software download PIN SWDIO/DIO10 Software download PIN DIO14 VBAT REST ADC1 I/O POWER Module hardware reset I/O Mark Software download PIN, suggest reserve on PCB Software download PIN, suggest reserve on PCB http://www.sziton.com/
6 / 16 iTONTechnologyCorp. STB1132-25 ADC2 I/O When module in sleep, DIO13/Wake-up lower level this PIN to wake Pull down duration50ms DIO12 GND DIO0 UART_RX UART_TX DIO4 DIO5 up module I/O POWER I/0 UART RX PIN UART TX PIN I/O I/O DIO3/Mode_N Mode select PIN H: Data mode L: Command mode DIO2 I/O DIO1/UART_TX_ IND GND Time delay control PIN for sending data from module to MCU POWER Default: H Default Close Can use command to set up the time delay 13 14 15 16 17 18 19 20 21 22 23 24 25 2.4 Schematic diagram http://www.sziton.com/
7 / 16 iTONTechnologyCorp. STB1132-25 Note:
1) 32.768KHz may save 2uA power consumption in Sleep mode, do not connect if not necessary. 2) Wake-up PIN is used to wake-up the module when it enter low power mode, please connect to MCU GPIO through pull-up resister R5. If this MCU GPIO with Pull-up function, then may connect to wake-up Pin directly. 3) Mode-IN PIN is used to switch module between pure data mode & command mode, please connect to MCU GPIO through Pull-up resister R2. If this MCU GPIO with Pull-up function, then may connect to Mode-in PIN directly. 4) TX-IND PIN is used to control the time delay before Module send data to MCU. Please connect to MCU GPIO through Pull-up resister R1. 5) UART_RX/UART_TX, need add pull-up resister accordingly, suggest to reserve. 6) P1 is the FW download port, please reserve if the PCB space is enough. 2.5 Electronic parameter 2.5.1 Basic parameter Item Working frequency band Protocol specification Max TX power RX sensitivity Work voltage Interface Baud rate Size Range 2400MHz~2500MHz BT4.1
+8dBm 88dBm 1.7V~3.6V UART 4800~921600 20.5mm(L) x14 mm(W) x 2.5mm(H) http://www.sziton.com/
8 / 16 iTONTechnologyCorp. STB1132-25 2.5.2 Maximum parameter Item VCC voltage Working temperature Storage temperature Working range Min.
-0.3
-20
-30 TBD. Max. 3.9 75 85 TBD. Unit V a noteVCC=3.0v, data flow 2Kbyte/s, under open environment 2.5.3 Working Voltage Item VCC Voltage Min. 1.7 Typ. 3.0 Max. 3.6 Unit V 2.5.4 Working Current Test condition: Vcc=3.0v@Ta=25 Mode CurrentAvg. Unit Notes Sleep Mode Standby mode(Discoverable) BLE Connected 5 40 57 400 79 2.39 2.92 uA uA uA uA uA mA mA No advertising LE Reduced Power advertising interval = 300ms No data, connection interval
= 20ms No data, connection interval
= 500ms 20byte/s, connection interval = 20ms 2Kbyte/s, connection interval = 20ms http://www.sziton.com/
9 / 16 iTONTechnologyCorp. STB1132-25 2.5.5 External Crystal SB1132-20 may be connected with external 32.768KHz crystal, this may save about 2uA power consumption in sleep mode. Crystal request as below:
Item fNOM fTOL ESR PD Parameter Nominal frequency Frequency tolerance Equivalent series resistance Drive level Min. Typ. Max. Unit 32.768 KHz 50 ppm 90 k 0.1 W 2.5.6 TX parameter Item Min. Maximum RF transmit power LE Sensitivity Typ. 8
-85 Max. Unit dBm dBm http://www.sziton.com/
10 / 16 iTONTechnologyCorp. STB1132-25 2.6 Dimensions 2.6.1 Mechanical dimensions http://www.sziton.com/
11 / 16 iTONTechnologyCorp. STB1132-25 2.6.2 Layout reference dimensions Layout note:
The ANT area please keep clearance, do not routing & copper. Filter CAP please place close to module. Non strong interference line under module. http://www.sziton.com/
12 / 16 iTONTechnologyCorp. STB1132-25 3. Process parameters 3.1 Recommended temperature curve Referred to IPC/JEDEC standard. Peak Temperature : <250C Number of Times : 2 times 4. Package information TBD http://www.sziton.com/
13 / 16 iTONTechnologyCorp. STB1132-25 5. Please be noticed following information and instructions should be placed in the end-users operating manual The MODEL STB1132 has been granted as limited modular approval for mobile applications. MODEL STB1132 must be installed in the designated host as specified in this manual. 1. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. 2. The MODEL STB1132 and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 3. A label must be affixed to the outside of the end product into which the MODEL STB1132 module is incorporated, with a statement similar to the following: For MODEL STB1132: This device contains FCC ID:
2AJ22STB1132. 4. The module shall be in non-detachable construction protection into the finished products, so that the end-user has to destroy the module while remove or install it. 5. This module is to be installed only in mobile or fixed applications. According to FCC part 2.1091(b) definition of mobile and fixed devices is:. Mobile device:
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters radiating structure(s) and the body of the user or nearby persons. In this context, the term fixed location means that the device is physically secured at one location and is not able to be easily moved to another location. Portable device:
For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. http://www.sziton.com/
14 / 16 iTONTechnologyCorp. STB1132-25 6. Separate approval is required for all other operating configurations, including portable configurations with respect to FCC Part 2.1093 and different antenna configurations. 7. A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently affixed label, the module must be labelled with an FCC ID: 2AJ22STB1132. The OEM manual must provide clear instructions explaining to the OEM the labelling requirements, options and OEM user manual instructions that are required For a host using a this FCC certified modular with a standard fixed label, if (1) the modules FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module:
Contains Transmitter Module FCC ID: 2AJ22STB1132 or Contains FCC ID: 2AJ22STB1132 must be used. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. Host product is required to comply with all applicable FCC equipment authorizations regulations, 8. requirements and equipment functions not associated with the transmitter module portion. compliance must be demonstrated to regulations for other transmitter components within the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. If a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, we suggest the host device to recertify part 15B to ensure complete compliance with FCC requirement: Part 2 Subpart J Equipment Authorization Procedures , KDB784748 D01 v07, and KDB 997198 about importation of radio frequency devices into the United States. http://www.sziton.com/
15 / 16 iTONTechnologyCorp. STB1132-25 6. FCC Certification Requirement:
The end product with an embedded - MODEL STB1132 may also need to pass the FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15. Note: If this module is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by iTon Technology Corp. may void the FCC authorization to operate this equipment. http://www.sziton.com/
16 / 16 Operation is Subject to the following two conditions:
(1) this device may not cause interference.
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numrique de la classe B est conforme la norme NMB-005 du Canada. When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition aux RF. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is Subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired Operation of the device.