PRODUCTS SPECIFICATION Version1.4 RW10BX-37P RW10BX-37P Specification IEEE 802.11b/g/n 1T1R Module Custom Approval Section Date check approve Custom Name Department Approval prepare LiaojL 2019.08.29 Iton Technology Corp. Add.: Room 1302, Block A, Building 4Huangge Road, Longgang District, Shenzhen CityGuangdong Province, China PRODUCTS SPECIFICATION RW10BX-37P Change Records Change the table Change NO. Date Subject And Reason Version NO. Responser 1 2 3 4 5 27-Nov-2017 Initial 15-Dec-2017 Module definition 21-Mar-2018 Modify the pin definition 10-Dec-2018 Modify module briefly 29-Dec-2018 Modify Frequency Band V1.0 V1.1 V1.2 V1.3 V1.4 Liaojl Liaojl Liaojl Liaojl Liaojl PAGE 2 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P CATALOG Change Records.....................................................................................................................2 1.General Description............................................................................................................4 2.Block Diagra.......................................................................................................................4 2.1.Functional Block Diagram.........................................................................................4 2.2.WIFI Application Diagram........................................................................................ 4 2.3.Power Supply Application Diagram.......................................................................... 5 3.FEATURE.......................................................................................................................... 5 3.1 General.......................................................................................................................5 3.2 Standards Supported..................................................................................................5 3.3 WLAN MAC Features.............................................................................................. 5 3.4 WLAN PHY Features............................................................................................... 6 4.WLAN Product Specification............................................................................................ 6 5.Size Of Module Graph....................................................................................................... 7 5.1 Physical Map............................................................................................................. 7 5.2 Machine Size Map And Pin Definition.....................................................................8 5.3 Pin Definition............................................................................................................ 8 6.RF Specifications................................................................................................................9 6.1Receiver RF Specifications........................................................................................9 6.2 Transmitter RF Specifications................................................................................ 10 7.Order Information.............................................................................................................12 8.Packaging Information..................................................................................................... 12 PAGE 3 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 1.General Description I TON RW10BX-37P is a highly integrated single-chip low power 802.11n Wireless LAN (WLAN) network controller. It combines an ARM-CM4 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in a single chip. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage. I TON RW10BX-37P integrates internal memories for complete WIFI protocol functions. The embedded memory configuration also provides simple application developments. 2.Block Diagra 2.1.Functional Block Diagram 2.2.WIFI Application Diagram PAGE 4 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 2.3.Power Supply Application Diagram 3.FEATURE 3.1 General CMOS MAC, Baseband PHY, and RF in a single chip for 802.11b/g/n compatible WLAN Complete 802.11n solution for 2.4GHz band 72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth Compatible with 802.11n specification Backward compatible with 802.11b/g devices while operating in 802.11n mode 3.2 Standards Supported 802.11b/g/n compatible WLAN 802.11e QoS Enhancement (WMM) 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services WIFI WPS support WIFI Direct support Light Weight TCP/IP protocol 3.3 WLAN MAC Features Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU) Low latency immediate High-Throughput Block Acknowledgement (HT-BA) Long NAV for media reservation with CF-End for NAV release PHY-level spoofing to enhance legacy compatibility Power saving mechanism PAGE 5 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 3.4 WLAN PHY Features 802.11n OFDM One Transmit and one Receive path (1T1R) 20MHz bandwidth transmission Short Guard Interval (400ns) DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble OFDM with BPSK, QPSK, 16QAM, and 640QAM modulation. Convolutional Coding Rate: 1/2, 2/3, 3/4, and 5/6 Maximum data rate 54Mbps in 802.11g and 72.2Mbps in 802.11n Fast receiver Automatic Gin Contro(AGC) 4.WLAN Product Specification Dimension Chip-set Standard Modulation Type Frequency Band Interface Spread Spectrum Transmission Distance Data Security Transmit Power L*W*H :19.8mm0.15mm*14.7mm0.15mm*2.3mm0.15mm RTL8710BX IEEE802.11n;IEEE802.11g;IEEE802.11b;
CCK OFDM(16-QAM) 2400~2483.5MHz UARTI2CPWM DSSS Indoor up to 100m, outdoor up to 300m(limited in an environment) 64/128bit WEP, WPA/WPA2, 2.4G:
11b:162dBm, 11g:142dBm, 11n HT20 :142dBm;
PAGE 6 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P Rx Sensitivity Data Rate Clock Ambient Temperature Storage Temperature Antenna Operation System Operation Voltage 11n HT20 MCS7:-71dBm@10% PER 11g 54M:-75dBm@10% PER 11b 11M:-88dBm@8% PER 802.11b[11,5.5,2 and 1Mbps]
802.11g[54,48,36,24,18,12,9&6Mbps]
802.11n(20MHz):up to 72Mbps 2.4GHz :20 ppm
-20~85
-55~125 internal PF or external PF windows OS, Linux 3.3V DC (0.3V) ,500mA,200mv under. 5.Size Of Module Graph 5.1 Physical Map PAGE 7 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 5.2 Machine Size Map And Pin Definition 5.3 Pin Definition Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 GND NC VDD33 NC GPIOA_8 GPIOA_11 GPIOA_5 NC NC NC NC GND Name
\
\
Description
\
\
Ground NC 3.3V power supply NC GPIOA_8 GPIOA_11 GPIOA_5.Multiplexed with PWM4(Pulse-Width Modulation) NC NC NC NC Ground PAGE 8 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 NC NC NC NC NC NC NC GPIOA_23/Uart0_TXD GPIOA_18/Uart0_RXD GND NC NC GPIOA_22/U0RTS GPIOA_19/U0CTS GPIOA_12/PWM3 GPIOA_0/PWM2 GPIOA_14/SWD_CLK GPIOA_15/SWD_TMS GPIOA_30/Uart2_log_TXD GPIOA_29/Uart2_log_RXD GND ANT GND 6.RF Specifications NC NC NC NC NC NC NC GPIOA_23.Multiplexed with UART0_TX (send data) GPIOA_18.Multiplexed withUART0_RX(Receive data) Ground NC NC UART 0 RTS(Request To send) .Multiplexed with GPIOA_22 UART 0 CTS(Clear TO send) .Multiplexed with GPIOA_19 GPIOA_12.Multiplexed with PWM3(Pulse-Width Modulation) GPIOA_0 .Multiplexed with PWM2 (Pulse-Width Modulation) SWD_CLK.Multiplexed with GPIOA_14 SWD_TMS.Multiplexed with GPIOA_15 GPIOA_30.Multiplexed with Uart2_log_TXD GPIOA_29 .Multiplexed with Uart2_log_RXD Ground WIFI Antenna Ground All measurements are made under nominal supply voltage, room temperature, and conducted conditions at each antenna port except antenna. 6.1Receiver RF Specifications Conditions Parameter Receive input frequency 2.4GHz Receiver sensitivity 802.11b 802.11b/g/n mode 1Mbps 2Mbps 5.5Mbps Min. Nom. Max. Unit 2401
-
-
-
-
-
-
-
2484 MHz
-80*
-80*
-76*
dBm dBm dBm Version1.4 FER<8%, Packet size=
1,024bytes PAGE 9 OF 15 PRODUCTS SPECIFICATION RW10BX-37P PER<10%, Packet size=
1,024bytes PER<10%, Packet size=
1,024byte 802.11g 802.11n
(HT20) 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS0 MCS1. MCS2 MCS3. MCS4. MCS5. MCS6. MCS7. Maximum input level 802.11b 802.11g/n FER<8%
FER<10%
6.2 Transmitter RF Specifications Conditions Parameter Receive input frequency 802.11b/g/n 2.4GHz Transmit Channel Power 11Mbps 802.11b 54Mbps 802.11g 802.11n 2.4GHz, HT20, MCS0~7 Spectrum mask 802.11b Fc 11MHz to 22MHz Fc 22MHz and more Fc 11MHz Fc 20MHz Fc 30MHz 802.11g
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-10
-20
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-76*
-82
-81
-79
-77
-74
-70
-66
-65
-82
-79
-77
-74
-70
-66
-65
-64
-
-
dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. Nom. Max. Unit 2401
-
2483 MHz 15 13 13
-
-
-
-
-
17 15 15
-
-
-
-
-
19 17 17
-30
-50
-20
-28
-40 dBm dBm dBm dBm dBm dBm dBm dBm PAGE 10 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 802.11n Fc 11MHz(21MHz @ HT20) Fc 20MHz(40MHz @ HT20) Fc 30MHz(60MHz @ HT20) Center Frequency tolerance 802.11b 802.11g/n EVM(Error Vector Magnitude)*
802.11b 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS0 MCS1. MCS2 MCS3. MCS4. MCS5. MCS6. MCS7. 802.11g 802.11n Remarks
-
-
-
-20
-20
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-20
-28
-45
+20
+20 35 35 35 35
-5
-8
-10
-13
-16
-19
-22
-25
-5
-10
-13
-16
-19
-22
-25
-28 dBm dBm dBm pmm pmm
%
%
%
%
%
dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB EVM :
<Test condition>
. Method: composite EVM method. Phase correction: Symbol-by-symbol correction. Channel estimation: Raw channel estimate full packet. Symbol timing correction: on. Frequency Sync: Long training symbol. PAGE 11 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 7.Order Information Part No. RW10BX-37PA RW10BX-37PB RW10BX-37PC 8.Packaging Information Description Ipex generation Antenna Ceramic Antenna PIN37/Stamp hole pad PAGE 12 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P installation. cause harmful This equipment generates, uses and can radiate radio frequency energy and, FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential if not interference to radio installed and used in accordance with the instructions, may communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators under the following conditions:
1.This module is certified pursuant to two Part 15 rules sections(15.247). 2.Antennas: This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Frequency Band Antenna Type Model Number Max Gain(dBi) 2400-2483.5MHz Multilayer ceramic antenna RFANT3216120A5T 2.12 3.Label and compliance information Label of the end product:
The host product must be labeled in a visible area with the following "Contains FCC ID: VYVRW10BX-37P". The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PAGE 13 OF 15 Version1.4 PRODUCTS SPECIFICATION RW10BX-37P 4.Information on test modes and additional testing requirements This module is restricted to integration into hosts for indoor use only. This module has been approved under stand-alone configuration. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations The information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host can be found at KDB Publication 996369 D04. 5.Additional testing, Part 15 Subpart B disclaimer Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer. This module is only FCC authorized for the specific rule parts 15.247 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. 6.The user manual of the end product should include:
a) Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. b) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. c) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. d) This device is restricted to indoor use. e) The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. PAGE 14 OF 15 Version1.4