Gene al Safety Rules r Please read this Guide carefully before you start using this Use only the MC401 components and accessories supplied by Do not attempt to disassemble the MC401, as it does not contain parts that can be repaired by the user. Any tampering device. the manufacturer. will void the warranty. laws. Discard replaced battery packs properly according to local At the end of this devices product life, dispose of properly according to local laws. Do not submerge the MC401 in any type of liquid. Charging Temperature-20 to 50 Mobile Computer MC401 Quick Start Guide Package ontents C MC401 Mobile Computer Battery Pack (with Rechargeable Battery) Quick Start Guide USB Charge/Communication Cable Quick Charge Compliant Power Adapter After unpacking, please inspect package contents. If any item is damaged or missing, please contact your customer support representative immediately. Featu es r Front View Top View Scan Window Bottom View Cradle IO Connecter
/ USB Connecter Back View Charging LED Touch Screen Keypad Scan Button Power Button Mic Flash LED Back Camera Speaker Battery Cover Lock Switch Battery/ Cover Latches Battery Pins SIM / Micro SD Card Slot Hand Strap Holes Side View Pistol Grip Screw Holes Headphone Input Scan Buttons r ha ging Inst uctions C r The MC401 battery pack is not initially fully charged. After installing the battery pack, please charge it via the USB cable. As default, the battery pack is disconnected at the factory to avoid damage caused by excessive draining. Replace the battery pack annually to ensure maximum performance. Avoid storing batteries for long periods of time in fully charged or very low battery level status. To maintain a moderate charge and maximize battery life, charge spare battery packs every two to three months. Installing the Battery Pack 1. Push the Battery Lock Switch to Open and remove the Battery 2. Align the Battery Pack and the device connectors and slide it into the Battery Slot. 3. Slide the Battery Cover into place. 4. Push the Battery Lock Switch to Closed to secure the battery. Cover CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY DISPOSE OF USED BATTERIES PROPERLY ACCORDINGTO LOCAL LAWS. Battery Cover Battery Pack Battery Slot Charging via USB Cable Use the provided USB charge / communication cable together with the Quick Charge compliant power adapter to charge the MC401 from a power outlet. Charging Time Charging time required will vary depending on the actual application of the MC401 and the condition of the battery pack. This device is shipped with a lithium-ion battery that is not fully charged. Please charge this device fully before first time use. Use under environment temperatures of -20C~50C. Rated Voltage Input
(1)
(2) SD / SI a Installation DC 5V,3A/9V,2A DC 5V,2.5A/9V,2A(For USA) M C rd 1. Turn off the MC401 or put it in Battery Swap Mode 2. Push the Battery Lock Switch to Open and remove the Battery Cover and Battery Battery Slot. 4. Use your fingernail to pull the SIM/Micro SD card tray out. 5. Insert a SIM or Micro SD card, or both into the proper tray slot(s). 6. Slide the tray back into place. 7. Insert the Battery and slide the Battery Cover on and latch it into place AN INCORRECT TYPE. 3. Locate the SIM/Micro SD Card Slot on the upper left side of the Scanning a Ba co e Label 1. Point the scan window at the barcode you wish to scan. 2. Tap Scan on the Scan app screen or press a scan button on the r d MC401. 3. The imager projects a laser aiming pattern to position the barcode in the imagers field of view. Center the laser red dot and cross-hair aiming pattern on the bar code. 4. Release the scan button to capture and decode the image. Laser Safety Do not stare into the beam of the laser light from this device. The MC401 uses an imager Aiming System with a laser light that is visible to the human eye and is emitted from the scan window at the top of the device. Important Notices When Using Before replacing the battery pack due to failure, shortened life, or unusual behavior, please confirm that the device has been used correctly, with no user operation issues involved. The manufacturer is not responsible for possible missing data or interference encountered during wireless transmissions. Do not use alcohol, benzene, organic solvents, cleaning liquid, or steel wool on the surface of this device. Do not scratch or mar the surface of the Scan Window in any way to avoid barcode scanning problems. Bluetooth This device is designed based on Bluetooth standard specifications. However, compatibility problems may still occur with other Bluetooth devices. Laser Light - Do not stare into this Beam Class 2 Laser Product. The maximum output radiation is 1 mW compliant with EN 60825-1 (2007) Before using this device, please make sure there is no other LTE wireless device operating within a short distance of the same application area that may cause wireless signal interference. Important Notices and Precautions The manufacturer has made safety the first priority during the design stage. To avoid potential mishaps, please observe the following notices and precautions:
Signal Interference from TV or Radio Sometimes transmitting or receiving data may fail due to signal interference from nearby TV or radio devices. Do not use the AC adapter of the MC401 with any Do not stock this device under high temperature conditions that may cause the battery to overheat. Do not charge longer than required. When the charging light is red, stop charging immediately. Charge this device in place without any water-spray or moisture. Use a dry cloth to wipe any dust off of the AC adapter plug to avoid potential fire. Do not drop this device on hard surfaces. Do not place heavy objects on this device to avoid cracking the enclosure. Do not unplug the AC adapter with wet hands to avoid electric shock. other devices. short-circuits or fire. Do not place the device in liquids to prevent Do not place this device near an open fire. If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire. Stop using immediately if there is any unusual smell or overheating during charging or Stop using immediately when there is liquid or operation. dew on the device. Do not use the AC adapter outdoors Please do not wrap the AC adapter with cloth or other objects that could block heat dissipation and cause electric shock or fire. When not charging, remove the AC adapter plug from the wall AC outlet socket to avoid a fire hazard. Audio Safety To prevent possible hearing damage, do not listen at high volume levels for long periods of time. European Union Regulatory Notes 1. Requirements for AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV
/LI/LT/LU/HU
/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR.5150MHz~5 350MHz is for indoor use only. 2. iMotion declares that the radio equipment type for the MC401 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iwaypro.com SAR Compliance SAR Information (European Union):
Head: 0.739 W /kg@ 10g (CE) Body: 3.594 W /kg@ 10g (CE) 5350 MHz frequency range. This device is restricted to indoor use when operating in the 5150 to Body-worn Operation This device was tested for typical body-worn operations. A minimum separation distance must be maintained between the users body and the handset, including the antenna:
0.5 cm to comply with the RF exposure requirements in Europe Third-party belt-clips, holsters and similar accessories used by this device should not contain any metallic components. Body-warn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Maximum Output CE Power and Frequency Ranges WWAN/WLAN Radio Type Description Frequency Bluetooth Bluetooth BR+EDR 2400~2483.5 MHz Bluetooth 4.0-LE 2400~2483.5 MHz 2.4GHz 2400~2483.5 MHz WLAN 5GHz 5150~5350 MHz 5470~5725 MHz WCDMA WCDMA Band I 1920~1980 MHz WCDMA Band VIII 880~915 MHz LTE Band 1 LTE Band 3 LTE Band 7 LTE Band 8 1920~1980 MHz 1710~1785 MHz 2500~2570 MHz 880~915 MHz LTE Band 20 832~862 MHz LTE Band 28 703~748 MHz LTE Band 38 2570~2620 MHz LTE Band 40 2300~2400 MHz GPS 1575.42 MHz Other F CC r Wa ning Statement 10dBm 4dBm 18dBm 20dBm 20dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 24dBm 24dBm 24dBm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product is kept as far as possible from the users body or if the device is set to a lower output power if such function is available. This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested r CC Wa ning Statement or certified, and use such accessories should be avoided. Taiwan N
3010 221 SAR2.0W/Kg0.147W/Kg NCCGSM, WCDMA B1/8, LTE 1/3/7/8/28/38/41, WLAN, BT FCCSupportGSM, WCDMA B2/5, LTE 2/4/5/7/12/17/38/41, WLAN, BT Operation Temp.'-20C. to 50C.
/ Rating:
/Input :
(1) DC5V,3A / 9V, 2A
(2) DC 5V,2.5A / 9V, 2A (For USA)