|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2021-09-07
|
|
various
|
2020-04-08
|
|
various
|
Applicant's complete, legal business name |
iWaylink Inc.
|
|
various
|
FCC Registration Number (FRN) |
0012188926
|
|
various
|
Physical Address |
6F., No. 288, Sec. 6, Civic Blvd. Xinyi Dist.
|
|
various
|
6F., No. 288, Sec. 6, Civic Blvd.
|
|
various
|
Taipei City, N/A
|
|
various
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
c******@telefication.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
SPY
|
|
various
|
Equipment Product Code |
TC601
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
F**** H********
|
|
various
|
S**** W********
|
|
various
|
Title |
AVP
|
|
various
|
Director
|
|
various
|
Telephone Number |
88628******** Extension:
|
|
various
|
88628******** Extension:
|
|
various
|
Fax Number |
88622********
|
|
various
|
E-mail |
f******@iwaypro.com
|
|
various
|
s******@iwaypro.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
|
various
|
Shenzhen BALUN Technology Co., Ltd
|
|
various
|
Name |
x****** w********
|
|
various
|
Physical Address |
Block B, FL 1, Baisha Science and Technology Park
|
|
various
|
China
|
|
various
|
Telephone Number |
+8675********
|
|
various
|
86-75********
|
|
various
|
Fax Number |
86-75********
|
|
various
|
E-mail |
x******@baluntek.com
|
|
|
app
s
|
Non Technical Contact
|
|
various
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
|
various
|
Shenzhen BALUN Technology Co., Ltd
|
|
various
|
Name |
T******** Z****
|
|
various
|
Physical Address |
Block B, FL 1, Baisha Science and Technology Park
|
|
various
|
China
|
|
various
|
Telephone Number |
86-75******** Extension:
|
|
various
|
Fax Number |
86-75********
|
|
various
|
E-mail |
y******@baluntek.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/28/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | DTS - Digital Transmission System |
| various | DXX - Part 15 Low Power Communication Device Transmitter |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | PCE - PCS Licensed Transmitter held to ear |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Rugged Mobile Computer |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Modular Equipment Type | Does not apply |
| various | Purpose / Application is for | Class II Permissive Change |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Class II Permissive Change : Only minor component, LCD panel is changed.
Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
This device has 20/40 MHz bandwidth modes.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.13 W/kg, <0.1 W/kg, <0.1 W/kg, and 0.88 W/kg, respectively. |
| various | Class II Permissive Change : Only minor component, LCD panel is changed. |
| various | Class II Permissive Change : Only minor component, LCD panel is changed.
Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530MHz, 5610 MHz, 5690 MHz and 5775 MHz.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.29 W/kg, 0.19 W/kg, 0.19 W/kg, and 0.98 W/kg, respectively. |
| various | Class II Permissive Change : Only minor component, LCD panel is changed.
Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are <0.1 W/kg, <0.1 W/kg, <0.1 W/kg, and 0.81 W/kg, respectively. |
| various | Class II Permissive Change : Only minor component, LCD panel is changed.
Power Output is ERP for part 22 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.47 W/kg, 0.79 W/kg, 0.79 W/kg, and 0.98 W/kg, respectively. |
| various | Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are <0.1 W/kg, <0.1 W/kg, <0.1 W/kg, and 0.81 W/kg, respectively. |
| various | Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
This device has 20/40 MHz bandwidth modes.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.13 W/kg, <0.1 W/kg, <0.1 W/kg, and 0.88 W/kg, respectively. |
| various | Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530MHz, 5610 MHz, 5690 MHz and 5775 MHz.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.29 W/kg, 0.19 W/kg, 0.19 W/kg, and 0.98 W/kg, respectively. |
| various | Power Output is ERP for part 22 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance.
The highest reported SAR values for head, body-worn accessory, hotspot, and simultaneous transmission use conditions are 0.47 W/kg, 0.79 W/kg, 0.79 W/kg, and 0.98 W/kg, respectively. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
|
various
|
Name |
H****** L******
|
|
various
|
Telephone Number |
86-75********
|
|
various
|
E-mail |
H******@baluntek.com
|
|