FCC ID: 2AXNJ-JSOM-XP JSOM EXPLORE MODULE

JSOM EXPLORE MODULE User Manual 1. Features JSOM Explore is a highly integrated module with low power single band (2.4GHz) Wireless LAN (WLAN) and Bluetooth Low Energy communication. 802.11 b/g/n 1x1, 2.4GHz BLE 5.0 Internal 2.4GHz PCB antenna Size: 40mm x 30mm USB2.0 Host Interface Supporting: SPI, UART, I2C, I2S interface application LCD driver supporting Audio DAC driver Supply Power Voltages: 3.135V ~ 3.465V 2. Picture of Product Top view Bottom View 3. Temperature Limit Ratings Parameter Minimum Maximum Unit Storage Temperature Ambient Operating Temperature 4. Functional block

-40

-20

+125

+85 C C 5. Package Specifications Note: Unit MILIMETERS [MILS]

LGA100 Device Dimensions 6. Product general specification OPERATING FREQUENCY NUMBER OF CHANNEL CHANNEL OF SPACING RF OUTPUT POWER MODULATION TYPE DUTY CYCLE MODE OF OPERATION BIT RATE OF TRANSMISSION ANTENNA TYPE ANTENNA GAIN TEMPERATURE RANGE Product Specification 802.11 b/g/n: 2412MHz ~ 2484 MHz BLE 5.0: 2402 ~ 2480 MHz 802.11 b/g/n: 1 ~ 11 CH (US, Canada) BLE 5.0: 0 ~ 39 CH 802.11 b/g/n: 5 MHz BLE 5.0: 2 MHz 802.11 b/g/n: 14 dBm BLE 5.0: 5 dBm BLE 5.0: GFSK 802.11 b/g/n: 0.1 BLE 5.0: N/A Simplex BLE 5.0: 1/2 Mbps PCB antenna 2.8 dBi

-20 ~ 85 C 802.11 b/g/n: BPSK/QPSK/16-QAM/64-QAM 802.11 b/g/n: 1/2/5.5/6/9/11/12/18/24/36/48/54 Mbps 7. Application/ Tools A. Image tool B. Wi-Fi UI MP tool UI MP tool could control Wi-Fi radio on test mode for testing purpose. BT RF test tool could control BLE radio on test mode for testing purpose by following command. C. BT RF Test tool ATM2=bt_power,on ATM2=gnt_bt,bt ATM2=bridge

(disconnect Putty and then turn on the tool) Regulatory Notices 1. Federal Communications Commission (FCC) Compliance Statement FCC Part 15.19 Statements:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 statement CAUTION: Any changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. FCC Part 15.105 statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 2. Industry Canada (IC) Compliance Statement CAN ICES-3 (B)/NMB-3(B) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie. de rf. your body. ISED Canada: This device contains license-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le present appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes : 1. Lappareil ne doit pas produire de brouillage; 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:

Contains FCC ID: 2AVPF-JSOM-XP Contains IC: 25873-JSOMXP

JABIL is JSOM wn THIN AAE EXPLORE ian SN: JSZKSXPJVOO12016123456 eg I] IC

[alee ees aoe Ce iS Chit roan |

Ce aC ae ee. ry on 0600204 02 0 oF ea td

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: JABIL Address:

City:

State:

Country:

10560 Dr M.L.K. Jr St N St. Petersburg Florida United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AXNJ-JSOM-XP Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby request non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Date: 2020-09-30 Name and signature of applicant: Raza Shah Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Jabil Inc RF_160, Issue 04 BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.114, Taipei Taiwan JABIL 10560 Dr M.L.K. Jr St N St. Petersburg Florida United States Declaration of Authorization We Name:

Address:

City:

State:

Country:

Declare that:

Name Representative of agent: Ms. Melody Wu Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: JSOM EXPLORE MODULE Type designation: EXPLORE Trademark:

Validity/ expiry date: From September 30, 2020 to September 29, 2021 on our behalf. Date:

City:

Name:

Function:

Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent. Director of Engineering Services September 30, 2020 St. Petersburg Raza Shah JABIL

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2AXNJ-JSOM-XP Items to be covered by Single modular transmitters. 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Answer from applicant YES, please refer to External Photos. YES, U2 RTL8722CSM-VA1-

CG is used for the function. YES, the modular transmitter has its own power supply regulation. YES, it is PCB antenna. YES, the module is tested in a stand-alone configuration as the test photos show. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). YES, please refer to the exhibition label sample for this module. 8. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. YES, please refer to the user manual. YES, RF exposure statement is attached in the user manual. RF_734_02 04 April 16 Answer from applicant Items to be covered by Split modular transmitters. 1. The modular transmitter must comply with all requirements of a single modular transmitter except for items (1) & (5) of the above single modular approval requirements. 2. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signalling amplitude of 150 mV peak-to-peak. 3. Control information and other data may be exchanged between the transmitter control elements and radio front end. 4. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. 5. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Raza Shah Date: 2020-09-30 Signature: ___________________________

Jabil Inc Wi-Fi Channel 12 and 13 Declaration Letter Date: 2020-09-30 We, the undersigned company Company Name: JABIL Address: 10560 Dr M.L.K. Jr St N, St. Petersburg, Florida, United States Declare that:

Product description: JSOM EXPLORE MODULE Type designation: EXPLORE Brand: JABIL FCC ID: 2AXNJ-JSOM-XP Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: Raza Shah Tel: +1 678 910 0747 Email: raza_shah@jabil.com