A) B) C) TG0802 User Manual Please dont be in high temperature, moisture or very dust place Avoid fall or Violent collision of the device, dont make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage. please charge In the following condition,
.The battery power ICONS shows have no power The system automatically shut off, startup after power off soon Operation buttons no response D) The machine that the top right corner show red icons When the device in the format or ongoing upload and download file, please don't suddenly disconnect, this could cause application error. Dont disassemble the product, dont use alcoholThinner or benzene to scrubbing products USB just only be used for data transmission 1 2.Main function FCC ID: 2AGCDJACSTG0802 Operation systems: Android 5.1 Processor: RK3128 Memory: 32G FLASH RAM: 2G DDR WI-FI : 2.4GHz b/g/n-HT20; 5.2GHz a; 5.8GHz a;
Bluetoothv4.0 (BR/EDR) Display screen: 8 inch Capacitive multi-touch Resolution: 800*1280 IPS Dual camera: Front:2.0M Pixels USB: Micro USB FM: built-in Record: built-in microphone Battery and capacity: rechargeable Built-in type polymer battery, 3.7V/8000mAh Video: AVI, MKV(XVID/px/H.263/H.264), MOV, TS, M2TS, RM/RMVB, FLV, 3GP, MPEG1 UP TO MP, MPEG2 UP TO MP,MPEG4 UP TO ASP LEVEL 5.2,DAT, MP4 MVC Music: MP3WMAAPEFLACOGGWAV Pictures: JPG, JPEG, BMP, and PNG Recording function: Format supported:WAV Format The company reserves the right to improve product, products specification and 2 design have any change, and the information is subject to changes without prior notice. 3. First use charge. 3.1 Battery management and charge Before first use, please set the device's battery is fully charged The first two times charging please keep about 6 hours, after that you just need 4 hours to Remark: This tablet using Built-in type polymer battery, Charge must be to choose standard adaptorAdaptor: power supply: DC 5V 2A, adaptor technical data: input AC100-240V,50/60Hz, Max: 500mA, DC5V 2A) 3.2 Connection with PC Use USB cable to connect with tablet PC, you can copy; delete the file on the device and the file on the memory card. 4. Equipment operation interface 4.1 Main interface describe After startup will enter the main interface, In the main interface, you can:
Management main interface software ICONS: long press the icons 3 second, after th e icons will bigger, then you can drag anywhere in the interface. Bottom right display the battery, battery charge icons, current time, Settings Menu 4.2 status bar describe 4.3 Use touch panel 3 No matter which interface you are on the screen, can go back to main screen through pressing the soft key on the bottom middle corner of the main screen. In different applications, by tapping the back soft key on the bottom middle corner on the touch screen, you can return to its interface on the upfloor.According to the currently running process 5. Equipment basic set Setting:
Click setting icons enter setting interface 5.1 Application Manage applications Unknown sources: Click Unknown Sources, then click OK Manage application: manager and uninstall Application Remark: when you Firmware Upgrade, please close the USB connect How to uninstall?
Aenter setting>Application>Manage application And then there will be installed the program list BClick you want to uninstall icons, will enter the following interface CClick Uninstall, then you can delete the application 4 5.2 Reset Options Factory data reset 5.3 Storage Remove TF card view of the available storage space Remark: please touch option delete SD card, so that can safety to remove SD card 5.4 Language & keyboard Setting: (Language), text input and automatic error correction options;
Select Language: 54 kind of national languages are available 5.5 Date & time setting Set date, set time, Select time zone and select date format 5 5.6 USB Mode Select Choose USB work pattern: OTG/HOST 6. Apps Install and manage Appinstaller This Tablet can support Android APP in market by third party, most Apps can install in the network, can copy to NAND FLASH or SD card. Click Appinstaller icon, will appear Install, manage, Exit options. Install: Click install, enter Apk install interface Separately for Internal Memory disk and SD Card disk. Select the APP you which you want to install, click it to install, go back to main menu, will display the installed app you just selected. 7. Problem solution 7.1 Device cant open ACheck the battery power BConnect adaptor first, then check again CPress the reset key first, the press power key DAfter charging then cant to open, pleas contact with the supplier 6 7.2 Device shut down after start up After startup the screen or the opening picture has been appear, the device appear shutdown: Power is not enough, please charge 7.3 Headset can't hear the voice APlease check the volume whether set to 0 B.Check the music file whether damaged. Try playing other music. CIf the file has damaged may lead to serious noise or hop sounds. 7.4 Cant copy file or play music and so on APlease check between computer and device is correct connection Bcheck the memory storage space is already full Ccheck the USB cable is good or not DUSB connection is disconnected 7 This device complies with part 15 of the FCC rules. Operation is subject to the following two
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause 8.FCC statements:
conditions:
undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. 8 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9.RF Exposure Information (SAR) The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Panasonic ELUGA Ray 600 (FCC ID: 2AGCDJACSTG0802) has also been tested against this SAR limit.The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.768 W/kg . This device was tested for typical bodyworn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. 9