BASIC INSTALLATION GUIDE FOR JALA MESH-ROUTERS IN MODE 1 This basic guide is intended as a quick help for those end-users who want to install and use the Jala Mesh-
Routers in a conventional (wireless) configuration using the so-called Mode 1. Master Installation:
Any of those routers could be installed as the master of the mesh. Use the electric power supply provided with the device to plug it to the chosen indoor-power-outlet. Turn on the device and wait for the Status LED to stop blinking. Use an ordinary Ethernet cable to connect the LAN port of the device to the Ethernet port on any computer. Using any browser on the computer, input 192.168.1.254 in the address field. Input admin as the user and also as the password on the access screen that will pop up. Choose Master mode and click Next. Following the examples in the screenshot, set the Internet (WAN) and WiFi parameters including a password. Click on Save. The device will automatically reboot and remain configured as the master. Wait a few minutes, and the master device of the mesh will be ready to use. Disconnect the Ethernet cable from the computer and the LAN port of the device, and use this cable to connect the WLAN port of the device to an Internet access port that the telecommunications company has provided for the house. Satellite installation:
The end-user can deploy a conventional mesh configuration in Mode 1 using any other two Jala Mesh-
Routers as satellites. The same as for the master, use the electric power supply provided with the device to plug each one of the two satellites to an indoor-power-outlet in the rooms where you decide to install them; turn them on, and wait for their status LED to stop blinking. As done before with the master, use an ordinary Ethernet cable to connect the LAN port of each one of the additional two devices to an Ethernet port of any computer. Using any browser on the computer, input 192.168.1.254 in the address field and check that the computer can now establish a network link with the previously-configured master. choice. Choose Satellite mode and click Next. Clicking Next after choosing Satellite will also save this Input admin as the user and also as the password on the access screen that will pop up. Each of these devices will automatically reboot and remain configured as a satellite. Follow the example in the screenshot to input the missing data and allow each newly configured satellite to get in sync with the master and click Save. The example shows both satellites allocated to a pair of locations or rooms (Dormitorio and Sala) that will depend on the user. After configuring the second satellite in the same way, please wait a few minutes, and the whole mesh network will be ready to use, providing WiFi access to all the WiFi mobile devices in the house, which will now be also able to navigate the Internet. The last screenshot shows that it is also possible to use a password to prevent unauthorized WiFi access. The default password for this purpose is 12345678, which can be changed at the users convenience. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.