Package contents Device layout Front Device layout Back Device layout Up/down & sides Device Stylus pen with Tether AC/DC Adaptor (AC plug) Battery Wrist Strap LCD protection film Front camera LED indicator Touch Screen Scan key Menu keys MSR Speaker Camera & Flashlight Battery cover Battery cover lock I/O Connector DC socket Exit window Volume Up/Down Headset jack Power key Scan key HANDHELD TERMINAL Quick start guide XT2WB Menu keys Installing battery Removing battery Recents key Home key Back key Function key Recents key Tap to open the list of recent apps. Home key Press to return to the Home screen while running apps Press to return to the Home screen from other screens Press and hold to launch internet Back key Tab to return to the previous screen or to close current screen (dialog box, option menu, notification panel, etc) 1. Rotate lock to counter clockwise and pull up the battery cover by holding both sides at bottom. 3. Hold the ribbon and lift upward to remove battery 4. Insert battery cover, top first and press it in the order named on the picture. Then press down on battery at the center again. Please read this manual before using the device and follow the instructions correctly. Some content may differ from your device depending on the devices software version. Function key Press to set functions on keys Press to create shortcut of programs 2. Insert battery, top first, into the battery compartment. Installing/ Removing Micro SD card Charging the battery Standard accessory Optional accessary Installing Micro SD card 1. Remove battery from device and insert Micro SD card. 2. Insert battery again after installing Micro SD card. Removing Micro SD card 1. Press Micro SD card gently and slide it out. 2. Remove Micro SD card from device. 3. Insert battery again. PUSH
<Caution>
Micro SD card is not standard/optional accessory. Do purchase it from distributor. Device supports storage extension upto 32GB with Micro SD card. Turn off the device before removing battery. Due to installing/ removing battery, save the working data first and then install or remove Micro SD card. 1. Insert plug on AC/DC Adaptor and connect to electric socket to charge. 2. LED indicator on upper left of device shows red light while charging and it turns to green light when the device is fully charged.
<Caution>
Use only items provided in your purchase for charging. You can also charge the device with optional accessory, cradle. 5V 2A AC/DC Adaptor plug SSC(Single Slot Cradle) 4SC(4 Slot Cradle) LCD protection film Battery (3000mAh) 4SBC(4 Slot Battery Charger) Stylus pen with Tether Wrist Strap I/O USB Sync cable Extended Battery(4000mA) Getting Started Scanning Scanning Scanning: aiming pattern Turning the device on and off On- Press power key on upper right of device to turn on. After few seconds, device will turn on. Off- Press and hold power key for a while till you and tap power off on the screen options. Set up Start with setting language input, google account, GPS, etc when the device is on for the first time. Device works without SIM card and device functions are available through WLAN network connection and google account registration. Home screen items Status bar Displays status/notification Tap and drag down to show notification panel Enable/ disable Scan Wedge Testing barcode scanner 1. Tab status bar on the top and drag to open notification panel. 2. Tab Scan Wedge to enable/ disable scanner. 3 If Scan Wedge is set disabled, scanner is at same status. 1. Execute Demos application on home screen. 2. Tab ScanDemo open. to 3. Press both scan keys at once or any of scan key on the device to scan barcode. 4. Scanned barcode data will show on screen as on the picture left. Browser bar 1 Tab and google search by text Tab and google search by voice 2 Home screen Tab and slide right/left to go other screens Tab icons to open applications/ folders Favorites shortcut Press and hold to set/move applications Opens apps window Enabled scanner icon Point the scanning beam at the center of barcode and keep scanning angle vertical to it. Scanning range varies according to bar code size so keep minimum distance for small barcode and further distance for bigger one. Good: Well aimed So so: aimed a bit below but still readable Poor: aimed a bit one sided but still readable. Bad: aimed diagonal, cannot read Bad: aimed too one sided to read, cannot read Bad: aimed vertical, cannot read Resetting the device Setting the date and time Connecting to PC Reboot Press and hold power key for 3 seconds and select Reboot on options to reboot the device. Settings -> back up and reset -> Factory reset ->
Reset phone Factory reset Follow the process by tapping next button to complete factory reset.
<Caution>
Back up all data - personal, application settings, account information and etc. before performing factory reset as it causes all data delete. Go to below route to set date and time. Settings -> Date and time -> Uncheck automatic date & time, Uncheck automatic time zone Access to above route and alter the following settings according to users decision. Set date Set time Select time zone Use 24-hour format Select date format Connecting USB data Sync cable Connect to PC and transfer data in Micro SD card/ device storage with I/O USB data Sync cable. Connecting connect USB cable to USB port of PC and I/O connector. Tab media device connection on notification panel of status bar. Select file transfer on pop up window. Disconnecting Tab to show notification panel and select media device connection. Select media device (MTP) and disable the connection. Technical support & A/S Offline Tel: 02-3397-7870 Fax: 02-3397-7872 Address: 100 Crossways Park Drive West, Suite 105, Woodbury, NY 11797 USA Online Website: http://www.janam.com/
E-mail: inquiries@janam.com User guides User guides supports detailed information on safety
& regulations of device and accessories. Due to the possibility of electric wave interference by device, no support on life safety. Certification Equipment name: Wireless data communication system device (Wireless Access System device with Wireless LAN) Model: XT2WB Trade name of certified: Janam Technology LLC. Manufacturer/ Country of origin: Janam Technology LLC. Production date: 2016.XX.XX FCC ID: UTWXT2WB IC ID: 6914A-XT2WB Warning Standard features Wireless features (frequency) Do not allow any strong pressure or impact on the touch screen. Do not touch any interior liquid from LCD panel breakage that may cause skin irritation. Use only approved AC/DC power adaptor provided with device or from distributor. Disapproved products may cause unexpected problems as fire, electric shock, etc. Disapproved modification or repair is not guaranteed. Inquire to distributor for any troubleshooting. Li-ion battery follows varied regulations in each region/ country. Accordingly, recycle or disuse li-ion battery properly. Do not leave or store it in fire or heat it or disassemble or short circuit it. Prevent plug and consent from dust and dirt to keep them clean. Improper storing or misuse may cause fire, electric shock, etc. Item Model Operating System Software Specifications XT2WB Android 5.X or higher(GMS/CTS certified) Tools and Demos Micro-Processor Qualcomm 8016 1.2GHz Quad Core Memory Memory extension Display Data options Keypad Audio I/O Weight Wifi Bluetooth NFC/RFID 1GB RAM X 8GB Flash(Upgradable) User accessible Micro SD memory card slot. 5.0 Wideviewing angle IPS(1280 X 720 pixels) capture 2D engine : SE4710 Touch screen & Front 4 hard keys Built-in microphone and speaker High speed USB 2.0 from cradle (or I/O cable) 279g / 293g(MSR model) with battery 802.11 a/b/g/n(Up to 150Mbps) Bluetooth v4.x, class2 13.5593MHz Serial(RS232C) 9600bps,19.2kpbs,38.4kbps,57.6kbps,115.2kbps USB Battery Adaptor Charger Battery Operating temperature Rain/dust protection USB HS 2.0 OTG Support via I/O connector Li-ion battery 3.8V / 3000 mAh / 11.4 Wh Output: 5V / 2A, Input: 100-240V~50/60Hz 0.4A 5V input through DC port. Capacity: 3000mAh Less than 4hrs.
-20C ~ 60C IP67 WLAN 802.11b/g/n : 2412~2472MHz 802.11a/n: 5180~5240, 5260~5320, 5500~5620, 5745~5805MHz Bluetooth 1~3Mbps: 2402~2480MHz LE: 2402~2480MHz HANDY TERMINAL Quick start guide XT2WB Allowed to use in all area. Please use the device at 1 cm or more distance away from your body. For more details of product information and user guide, please refer to our website (www.janam.com) Certificate & Regulatory FCC Allowed to use in all area. Please use the device at 1 cm or more distance away from your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. IC Canadian Compliance This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CE marking CAUTION! This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. IC RF Exposure Statement NII frequency band 5150-5250 MHz is restricted to indoor use only.