Certification to This device complies with part 15 of the FCC Rules. Operation is subject may not cause harmful interference, and (2) this device must accept any may cause undesired operation. two conditions: (1) This device the following interference interference received, including that instruction manual, may cause harmful This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the users authority to operate the equipment. RF Exposure This device complies with RF exposure requirement. For European Community Users We have included this bulletin to comply with Directive 2012/19/EU OF THE EURPOEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE) This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could the environment, If not, properly disposed. In order to avoid the dissemination of those substances in our environment and diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way. impact health and The crossed out wheeled bin symbol inform you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling system, please contact your local or regional waste administration. You can also contact your supplier for more information on the environmental performances of this product. CE Compliance (for EU only) This product is labeled with the CE mark in accordance with the provisions of the applicable RoHS Directive 2011/65/EU for this product and the electric accessories. UHF RFID Sled for XT2/XT2+
Quick Start Guide Technology at Work. Rev.01 Contents UHF RFID Sled AC/DC Adapter (5V2A) US Plug Handstrap USB Type-C Cable Hardware Overview 1. UHF RFID Antenna 2. Trigger 3. Power Key 4. Mode Change Key 5. USB Type-C Connector 6. LED Indicator Hand Strap Charging the UHF RFID Sled The UHF RFID Sled and XT2/XT2+ are charged individually. Charge the UHF RFID Sled by inserting the USB Type-C cable to the connector. The UHF RFID Sled is fully charged when the charging LED turns solid green.
<Caution>
Use only Janam batteries and recharge batteries using only Janam approved charging accessories. Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact Janam. LED Indicator Demo App Installation Specifications Item Frequency Protocol Output USB Bluetooth HID LED Button Buzzer Configurations Size Battery Battery Charge Time Drop Adaptor Weight Specifications UHF 900MHz ISO 18000-63(18000-6C) / EPC global Class 1 Gen 2 Max. 30 dBm(1Watt), 1dBm unit USB Type C / USB to Serial Communication Bluetooth v4.1(Classic + Low Energy) / SSP Profile HID support LED(Charge / Power / Sync / Status) Power, Mode Max, Min, Mute RFID only or RFID with 2D scanner(Optional) 70 x 139 x 115.8mm(W x H x D) 3,350 mA, 3.6V Li-ion AC : About 4H(5V/1.4A) PC USB : About 8H(USB 2.0, 5V/500mA) 1.5M 5V / 2A 350g 1. Search UHF RFID Sled from the Google Play Store 2. Install Demo App 1. Charging LED 2. Power LED 3. Mode LED Solid Red Solid Green Solid Red Blinking Red Solid Green Blinking Green Solid Orange Blinking Orange Red Green Orange 4. Status LED Red Green Battery is charging Battery is charged Power is On Power is low BT is connected BT is connected and power is low USB connected to PC USB connected to PC and battery is low BT SPP connected BT HID connected Connected to BT pairing app or USB connected UHF RFID ready Barcode scan ready Bluetooth Pairing RFID Tag Decoding www.janam.com 1. Aim the device at the RFID tag. 2. Press the trigger to read the RFID tag. Technology at Work. 1. Pair the UHF RFID Sled with the XT2 or XT2+
using Bluetooth. 2. Launch the UHF RFID Sled Demo App.