FCC ID: XZ3-KEN4-R PROFESSIONAL STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER)

JM-WAL35 USER GUIDE Wi AudioLink Professional Stereo Digital Wireless Audio Dongles STEREODIGITAL WIRELES Wi-AudioLink CONGRATULATIONS CONGRATULATIONS!

Thank You For Choosing Jangus Music!

Congratulations on your purchase of the Wi-AudioLink Professional Stereo Digital Wireless Audio Dongles. In this manual, youll find information designed to help you understand the capability of your Wi-AudioLink as well as step-by-step explanation on how to install and operate your Wi-AudioLink professional stereo digital wireless audio dongles. Wi-AudioLink TECHNICAL SUPPORT Getting Answers!

We want you to get the most from your new Wi-AudioLink professional stereo digital wireless audio dongles!

Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions. Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioLink comes with 90 days of telephone support and one year of service coverage. There are may ways to contact Jangus Music customer service support. E-Mail:

Website:

Technical support:

support@jangusmusic.com https://www.jangusmusic.com/support

(949) 526-4877 [949-JANGUS7]

3 Wi-AudioLink INTRODUCTION Making Grate Instruments Better!

Jangus Musics Wi-AudioLink JM-WAL35 professional stereo digital wireless audio dongles solution is the smallest, most advanced cable replacement technology available today that fits on the palm of your hand!

This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure, simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio frequency (RF) interference with other wireless devices ,signal loss, crackle or AC hum making it the best wireless solution for live performances and studio recording environments. This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable and provide easy and user friendly way to connect any professional musical instrument such as Digital Pianos, Keyboards, Guitars, Effects Pedals, Electronic Drums and other analog audio devices to remote and hard to reach equipment such as Mixers, Amplifiers, Speakers, Samplers, Hard Disk Recorders, Computers and more. Simply connect the dongle size transmitter to the audio output jacks on the musical instrument then connect the dongle size receiver to the mixer, amplifier, speaker, surround sound or computer audio input jacks and you are done!... 4 Meeting The Specs!

The Wi-AudioLink transmitter small and rugged design, boasts three (3) different power up modes to support the following instruments connections:

Line-in (Stereo) Active Guitars/Mono Line-in Passive Guitars /Electric Acoustic Each of the power up modes are configured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle. Wi-AudioLink INTRODUCTION Effects Pedals Amplifiers Mixers Digital Recorders Effects Pedals Electric Guitars MP3 Mixers Electric Acoustics Smart Phone DJ Gear Electronic Wind instruments Pianos &

Keyboards Digital Recorders Transmitter

(Tx) Receiver

(Rx) In-ear Headphone Monitors Flat Screen TV Stereo System Consumer Electronic Computers Drums Professional Gear Computers Stereo System 5 Wi-AudioLink INTRODUCTION Extreme Flexibility!

The Wi-AudioLink boasts an interchangeable 1/4 (6.35mm) TRS stereo connector jack, 1/8

(3.5mm) stereo miniature jack, 2.5mm subminiature jack and XLR connectors for maximum connectivity with audio devices. The Wi-AudioLink power source flexible design boasts an internal rechargeable battery for 6.5 hours of battery operations, powerful USB bus power connectivity to any USB equipped devices and optional ON-THE-GO AA battery power booster adapter for 19 hours of extended battery operations. 6 RCA 2.5mm Mono 2.5mm Stereo 3.5mm Mono 3.5mm Stereo 6.3mm TSR Mono 6.3mm TSR Stereo XLR Unbalanced 3.5mm Stereo USB Bus Power AA Battery Power Booster Charger Creating Your Audio Matrix!

Jangus Musics built-in digital wireless audio signal patch routing feature allows users to re-rout the audio output signal from their instruments to up to eight (8) different digital wireless receivers including Jangus Musics JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the Link button located on the transmitter dongle. No more removing the patch-bay devices, disconnecting cables, and flipping I/O circuit boards!

Wi-AudioLink INTRODUCTION Headphone Rx 2 Effects Pedals Rx 1 Foot Pedals Rx 8 7 Mixer Rx 4 Computer Rx 5 Digital Recorder Rx 6 Rx 3 Tx 1 Rx 7 Wi-AudioLink PACKING LIST What is included in the package?

Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories. m o c

. c i s u m s u g n a j

. w w w Wi-Transmitter Wi-Receiver USB Y-Split Power Cable Universal AC Charger

(QTY 2) 1/4 Mono Male to 1/8 Stereo Male Cable

(QTY 2) 1/4 Stereo Male to 1/8 Stereo Male Y-split Cable User Manual Carrying Bag 8 Wi-AudioLink ABOUT YOUR JM-WAL35 Wi Transmitter 1. Audio IN Jack 2. Power ON/OFF 3. Link / Paring 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute 8. Sleep 9. Mic Power Mode 10. USB Charging Port 11. Belt Clip j r o n q p l m k Wi Receiver 1. Audio OUT Jack 2. Power ON/OFF 3. Link / Paring 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute/ Play/Pause 8. Previous Track 9. Next Track 10. USB Charging Port 11. Belt Clip 11 s u

y

z w x v 11

9 Wi-AudioLink TRANSMITTER CONTROLS Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter Provide a stereo connection for professional musical instruments, mixers samplers and any analog devices such as MP3 players, cell phones, stereo systems, computers, home entertainment systems and more... Transmitter Dongle Controls and Connections j Audio IN Jack:

k Power ON/OFF:

l Power/Status LED: The Power/Status LED display the status of six functions, ON/OFF, Battery Charging, Paring, Microphone Power, Mute and Sleeping mode statuses FPlease refer to the Tx Button Function Matrix section of this manual for more details m Volume UP:

n Volume DOWN:

10 Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level Wi-AudioLink TRANSMITTER CONTROLS The Link button performs two functions Paring and Linking. Press and hold the Mute button for 3 seconds stop the audio transmission FPlease refer to the Tx Button Function Matrix section of this manual for more details o Mute:

p Link/Pair:

F Please refer to the Function Matrix Table section of this manual for additional information The Paring function allows the transmitter dongle to connect to up to 8 eight different receivers to create you own wireless audio matrix. Press and hold the Link button for 6 seconds until LED flash F Please refer to the Paring Procedures section of this manual for detailed instructions F Please refer to the Audio Matrix Accessories section of this manual for options listing The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. F Please refer to the Audio Matrix Accessories section of this manual for options listing 11 Wi-AudioLink TRANSMITTER CONTROLS Transmitter Dongle Controls and Connections q Sleep:

12 The Sleep function button on the transmitter dongle is designed to prolong the battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use. When the Sleep function on the transmitter is activated, the transmitter dongles sends a signal to the linked receiver dongle to go into a standby mode while switching to full sleep mode. The Sleep mode preserves the audio levels settings on both dongles as well as on the communications link between the transmit and the linked dongle. Press and hold the Sleep button for 3 seconds to switch the transmitter and the receiver dongles onto standby power save mode Press and hold the Sleep button for 3 seconds to wake-up the transmitter and the receiver dongles. F Please refer to the Tx Button Function Matrix section of this manual for more details Wi-AudioLink TRANSMITTER CONTROLS The Mode multifunction button allows the user to choose between three different power up modes to support Passive Guitars, Active Guitars or Stereo Line in connection to the transmitter dongle. To select the desired operations mode, press the Mode button for 2 seconds and until the blue LED change its flashing sequence then release, To cycle between the three modes, simply press and hold the Mode button and the transmitter will cycle between the three modes along with the Blue LED flashing sequence to each of the modes. Release the mode button once the desired mode setting is reached F Please refer to the Tx Button Function Matrix section of this manual for detailed instructions . The transmitter dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. The transmitter dongle can be attached to guitar strap, belt, shirts and pants pockets. The rigid small size light wight design is easy to ware without impeding your movement. 13 r Mode:

s Charging Port:

11 Belt Clip:

Wi-AudioLink RECEIVER CONTROLS Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter Provide a stereo connection for professional Sound Systems, Monitors, Mixers, Samplers, Computers Home Digital Theaters, Headphones and more... Receiver Dongle Controls and Connections u Audio OUT Jack:

v Power ON/OFF:

w Power/Status LED: The Power/Status LED display the status of five functions, ON/OFF, Battery, x Volume UP:

y Volume DOWN:

Charging, Paring, Mute and Sleeping mode statuses FPlease refer to the Rx LED Indicator Chart section of this manual for more details Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level 14 Wi-AudioLink RECEIVER CONTROLS z Link/VoIP:

The Link multifunction button performs three functions, Paring, Linking and VoIP Mic activation. The VoIP function is covered in the VoIP Microphone on page 15. The Paring function allows the Receiver dongle to discovered by the Transmitter Dongle. Press and hold the Link button for 6 seconds until LED flash FPlease refer to the Rx Button Function Matrix section of this manual for detailed instructions FPlease refer to the Rx Button Function Matrix section of this manual for additional information The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. The Next Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list. Press the Next Track button once to jump to the next audio track FPlease refer to the Audio Matrix section of this manual for more details 15

{ Next Track:

Wi-AudioLink RECEIVER CONTROLS Receiver Dongle Controls and Connections

| Previous Track:

} Mute/Pause/Play:

The Previous Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list Press the Previous Track button once to jump to the previous audio track. FPlease refer to the Rx Button Function Matrix section of this manual for more details Press and hold this function button for 3 seconds stop the audio transmission FPlease refer to the Rx Button Function Matrix section of this manual for more details When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle, the Mute/Pause/Play function will remotely control the media player and sequencing software to mute, pause or play to the audio track Press the Mute/Pause/Play button once to pause or play audio track. Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio FPlease refer to the Rx Button Function Matrix section of this manual for more details 16 Wi-AudioLink RECEIVER CONTROLS

~ Charging Port:

11 Belt Clip:

The receiver dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. The receiver dongle can be attached to, belts, shirts and pants pockets when used with in-ear professional personal monitors. The rigid small size light wight design is easy to ware without impeding your movement. 17 Wi-AudioLink GETTING STARTED Ready, Charge, Go!

Before using your new Wi-AudioLink professional digital wireless dongles, you need to fully charge the batteries on the dongles for approximately 2 hours. Charging 1. Plug the AC Charger into a power socket 2. Connect the USB Y-Split power cable into the USB port on the AC charger 3. Connect one of the two mini USB connectors into the Transmitter USB port 4. Connect the second mini USB connector into the Receiver USB port 5. The Power/Status LED will turn to solid Red ON 6. When charging is complete the Red LED will turn OFF 7. Remove the charging cable and adapter and store into the carrying case AC Charger USB Connector USB Port L I N K P O W E R USB Port Mini USB Connector 18 Wi-AudioLink PARING Paring the Wi-AudioLink Before using the Wi-AudioLink dongles with your instruments, you need to pair the transmitter dongle with the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle. k v p 1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and holding the POWER button , on each of the dongles for 2 seconds. 2. Press and hold the LINK button on the transmitter (Tx) dongle for 6 seconds. The Power/Status LED on the Transmitter will start flashing. The transmitter dongle is now in a Pairing mode and ready to search for receivers. p 3. Press and hold the LINK button on the receiver (Rx) dongle for 6 seconds. The Power/Status LED on the receiver will start flashing. The receiver dongle is now in a Pairing mode and ready to be found by the transmitter dongle 4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED on both devices will turn to solid Green 5. The Wi-AudioLink transmitter and receiver dongles are now ready for use. z

(Rx) k

(Tx) z v 19 Wi-AudioLink TRANSMITTER CONNECTION Connecting Electric Guitars & Electric Acoustics Instruments!

The Wi-AudioLink transmitter support passive and active guitars including Lead, Bass and Acoustic electric guitars. Audio Input Jack Audio Cable 1. First Locate the 1/4 mono male to 1/8 stereo male cable supplied with kit. 2. Connect the 1/8 stereo male end of the cable into the Audio Input jack on the transmitter dongle. 1/4 Mono to 1/8 Stereo Cable Belt Clip 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. Electric Guitar input 4. Connect the 1/4 mono male end of the cable to the electric guitar input located towards the right end of the electric guitar if youre a right handed player and the left end if youre left handed. 1/4 mono male connector 20 Wi-AudioLink TRANSMITTER CONNECTION 5. Verify if you are connecting a passive or active electric guitar to the transmitter. If the electric guitar use a battery to operate, then the guitar is an active type. If not then the guitar is a passive type. k 5.1 For Passive Guitars Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs F The standard factory power up setting is set for Passive Guitars . The transmitter can remember and power up in the last power up mode selected .To change the startup mode to the desired mode please refer to the Tx Function Matrix of this manual for detailed instructions, 5.1 For Active Guitar & Electric Acoustic Instruments Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the Mode button for 2 seconds. The Blue LED will display fast flashes F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs 6. Attache the Wi-AudioLink to the optional Wi-Guitar Strap or to your belt. F Please proceed to page 28 for the receiver connection r k r

(Tx) k 21 Wi-AudioLink TRANSMITTER CONNECTION Connecting Professional Musical Instruments & Gear!

The Wi-AudioLink transmitter support professional digital instruments connection such as Digital Pianos, Keyboards, Electronic Drums, Electronic Wind Instruments, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, JD gear, and more... 1. For (Mono) connection locate the 1/4 mono to 1/8 stereo cable For (Stereo) connection locate the 1/4 stereo Y-split to 1/8 stereo cable 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. Audio Input Jack 1/4 Mono to 1/8 Stereo Cable Audio Cable 22 Belt Clip Wi-AudioLink TRANSMITTER CONNECTION 4. For (Mono) connection, connect the 1/4 mono male end of the cable to the left mono output (L/MONO) located on the back panel of the digital instrument. For (Stereo) connection, connect the two 1/4 male ends of the cable to the left (L/MONO) and right (R) outputs located on the back panel of the digital instrument. 6. Power up the transmitter by pressing and holing the POWER button for 2 seconds. k r 7. Press and hold the Mode button until the Blue LED display two fast flashes for stereo Line-in mode operations. F Please refer to the Tx Button Function Matrix section of this manual for detailed instructions 6. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively the receiver can be placed on the next to the musical instrument. F Please proceed to page 28 for the receiver connection Digital Instrument

(R)

(L/MONO) 1/4 Stereo Y-Split to 1/8 Stereo Cable r

(Tx) k 23 Wi-AudioLink TRANSMITTER CONNECTION Connecting Two Keyboards/Digital Pianos!

The Wi-AudioLink transmitter can support up to two (2) keyboards / digital pianos in mono mode or stereo mode connection. Please visit our web site at www.jangusmusic.com for the optional two keyboards stereo cable connection accessories 1. First Locate the 1/4 stereo Y-split to 1/8 stereo cable supplied with kit. 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. 24 Audio Input Jack 1/4 Stereo Y-Split to 1/8 Stereo Cable Audio Cable Belt Clip Wi-AudioLink TRANSMITTER CONNECTION Keyboard #1 4. Connect the red 1/4 end of the cable to the left mono input located on the back panel of the first keyboard/digital piano. 5. Connect the black 1/4 end of the cable to the left mono input located on the back panel of the second keyboard/digital piano. 1/4 Stereo Y-Split to 1/8 Stereo Cable 6. Power up the transmitter by pressing and holing the POWER button for 2 seconds. k r 7. Press and hold the Mode button until the Blue LED display two fast flashes for stereo Line-in mode operations. F Please refer to the Tx Button Function Matrix section of this manual for detailed instructions . 8. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively the receiver can be placed on the next to the musical instrument. F Please proceed to page 28 for the receiver connection Keyboard #2 r

(Tx) k

(L/MONO)

(L/MONO) 25 Wi-AudioLink TRANSMITTER CONNECTION Connecting Computers, Stereo Systems, Flat Screens, Smart Phones, iPods & MP3 Players!

The Wi-AudioLink transmitter support consumer digital devices connection such as Computers, iPods, MP3 Players, Media players, Smart Phones, Stereo Systems, Flat Screen Displays and any device with headphone jack. Please visit our web site at www.jangusmusic.com for the consumer devices optional cable connection accessories 1. For MP3, Smart Phones and Computer connections, locate the optional 1/8 stereo to 1/8 stereo cable. (Optional cables are not supplied with the kit) For Flat screen TVs and Stereo Systems connection, locate the optional 1/8 stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit) 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable Audio Cable Belt Clip 26 Wi-AudioLink TRANSMITTER CONNECTION 4. For MP3, Smart Phones and Computer connections, connect the 1/8 stereo male end of the cable to the headphone jack located on your electronic device. For Flat screen TVs and Stereo Systems connection, connect the two RCA male ends of the cable to the left and right audio outputs located on the back panel of the electronic device. 5. Power up the transmitter by pressing and holing the POWER button for 2 seconds. k r 6. Press and hold the Mode button until the Blue LED display two fast flashes for stereo Line-in mode operations. F Please refer to the Tx Button Function Matrix section of this manual for detailed instructions . 7. Place the transmitter (Tx) dongle next to the electronic device. F Please proceed to page 28 for the receiver connection r

(Tx) k 27 Wi-AudioLink RECEIVER CONNECTION Connecting Analog and Digital Devices to Receiver!

The Wi-AudioLink receiver support professional digital instruments connection such as Mixers, Amplifiers, Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, JD gear, and more.. Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions. If youve connected a stereo audio amp, be aware that playing at high volume may damage your speaker system. Be careful not to raise the volume excessively. Audio Output Jack 1. For (Mono) connection locate the 1/4 mono to 1/8 stereo cable For (Stereo) connection locate the 1/4 stereo Y-split to 1/8 stereo cable 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 28 1/4 Stereo Y-Split to 1/8 Stereo Cable Wi-AudioLink RECEIVER CONNECTION 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable Audio Cable 4. Connect the 1/4 male end of the cable to the inputs of your amplifier, powered monitor, sound system, mixer or foot pedal. If youre using the Wi-Audiolink receiver in stereo, use both the L/ MONO and R jacks on your foot pedal, sampler or use two channels on your sound system, mixer or hard disk recorder. Audio Input Belt Clip POWER LINK 29 Wi-AudioLink RECEIVER CONNECTION v 4. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 5. Place the receiver dongle on the amp as shown. Alternatively the receiver can be placed on the floor next to the foot pedal or stomp box. 6. Power up your Amp, Mixer, Digital Recorder or Foot pedal are you are ready to go!

(Rx) z v POWER LINK 30 Wi-AudioLink RECEIVER CONNECTION Connecting Headphones and In-Ear Professional Personal Monitors!

Audio Output Jack PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8 stereo connector end of your headphone or In-Ear personal monitor into the Audio Output jack on the receiver dongle. 2. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable v 3. First turn ON the receiver dongle by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. In-ear Personal Monitors Audio Cable v

(Rx) Belt Clip 31 Wi-AudioLink RECEIVER CONNECTION Connecting Computers and Stereo Systems!

The Wi-AudioLink receiver support consumer digital devices connection such as Computers, iPods, MP3 Stereo Systems, Notebook and Desktop Computers. Please visit our web site at www.jangusmusic.com for the consumer devices optional cable connection accessories 1. For notebook and desktop Computer connections, locate the optional 1/8 stereo to 1/8 stereo cable. (Optional cables are not supplied with the kit) For stereo systems connection, locate the optional 1/8 stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit) 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable Audio Output Jack 32 1/4 Stereo Y-Split to 1/8 Stereo Cable 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable Wi-AudioLink RECEIVER CONNECTION Audio Cable 4. For notebook and desktop computer connections, connect the 1/8 stereo male end of the cable to the headphone jack located on your electronic device. For stereo systems connection, connect the two RCA male ends of the cable to the left and right outputs located on the back panel of the electronic device. v 5. First turn ON the receiver dongle by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 6. Place the receiver dongle on top of the stereo system or next to your computer. 7. Power up your stereo system or computer and are you are ready to go!

Belt Clip

(Rx) v 33 Wi-AudioLink Tx FUNCTION MATRIX Button k POWER p LINK p LINK mn o q r MODE r MODE r MODE Sleep / Wake up Passive Guitar Mode

(Factory setting) Active Guitar Mode

(Mono Line-in) Line in Mode

(Stereo Line-in) 34 Transmitter (Tx) Button Function Matrix!

Function Power ON/OFF Pairing Mode Signal Re-routing Volume UP/Down Mute ON/OFF Activation Press and Hold Press and Hold Click Click for Step, Press and hold for Auto Press and Hold Hold Time LED Status 3 sec 2 sec Click Click 2 sec Solid Green Fast Green Flashes Solid Green Blue Flash Press and Hold to Sleep / Click to Wake 3 sec 2 Green Flashes Press and Hold Press and Hold Press and Hold 2 sec 2 sec 2 sec Solid Green LED and Slow Blue LED Flashes Solid Green LED and Fast Blue LED Flashes Solid Green LED and Two Blue LED Flashes Transmitter (Tx) LED Indicator Chart!

Function Searching For Receiver Linked to Receiver Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF l l l l l l Wi-AudioLink Tx LED INDICATOR CHART r o n q p l m k 35 Wi-AudioLink Rx FUNCTION MATRIX Receiver (Rx) Button Function Matrix!

Function Power ON/OFF Button POWER Activation Press and Hold Pairing Mode LINK Press and Hold v z xy

Volume UP/Down Mute ON/OFF Play/Pause Next Track Prev Track 36 Hold Time LED Status 3 sec Solid Green 3 sec Fast Green Flashes Click for Step, Press and Hold for Auto Click Press and Hold Click (With Optional USB Tx Dongle) Click (With Optional USB Tx Dongle) Click (With Optional USB Tx Dongle) 3 sec Click Click Click Solid Green & Blue Receiver (Rx) LED Indicator Chart!

Function Searching For Receiver Linked to Receiver Sleep Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green w w w w w w w 2 Green Flashes (Activated By Tx) Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF Wi-AudioLink Rx LED INDICATOR CHART

y

z w x v 37 Wi-AudioLink PRODUCT SPECIFICATIONS Product Technical Specifications!

Specifications Frequency:

Frequency Response:

Communications Frequency Selection: Auto Select S/N Ratio:

Audio Input / Output:

Max Input Level:

Max Output Level:

Input Impedance:

Output Impedance:

Battery Life:

Battery Type:

2.4 GHz, 16bit, 48KHz Digital Wireless Communications 10Hz to 20Khz More than 90 dB (A-weighted) for stereo line-in mode More than 87 dB (A-weighted) for passive and active guitar modes 3.5mm Stereo Jack 3Vrms 700mVrms 1M ohm

< 10 ohm 6.5 hours Internal Rechargeable Batteries 38 Wi-AudioLink PRODUCT SPECIFICATIONS Specifications Battery Power Boost:

USB Bus Power Low Battery Alert:

19.5 hours (With optional AA battery power booster adapter) Yes 15 Minutes of Life Left Power-up Modes Antenna:

Range:

Units operating at the same time:

Signal Patch Audio Matrix:

MAC/PC Compatible:

VoIP Capable:

802.11g/n Network Safe:

Transmitter Weight Receiver Weight Dimensions Three (3) Power-up Modes

(Line-in/Active Guitars, Passive Guitars, Electric Acoustic) Internal Antennas 150 to 300 Feet (May not be dependent on line of sight) 12 One (1) transmitter can re-rout audio signal to eight (8) different receivers Yes (With Optional USB Transmitter Dongle) No Yes 0.068 lbs 0.056 lbs 1.2 W x 0.6 D x 3.34 H 39 Wi-AudioLink PRODUCT ACCESSORIES Audio Matrix Accessories for Extreme Flexibility!

Accessory Wi-StudioM:

Wi-USB Tx:

Wi-iPod Tx:

Wi-AudioLink Tx:

Wi-AudioStream Tx:

Wi-AudioLink Rx:

40 Specifications Digital wireless studio monitors headphones Digital wireless USB transmitter for MAC/PC audio and VoIP applications Digital wireless transmitter for Apple iPod Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars, Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic Drums, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Digital wireless transmitter for Mono and Stereo microphones and personal monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic, Brass and Woodwind Instruments Microphones, MP3 players and more. Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors, Effects Pedals, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Wi-AudioLink ACEESSORIES Specifications Cable & Power Accessories for Extreme Flexibility!

Accessory Wi-BodyFree Guitar Strap: Guitar strap with built-in Wi-PowerBooster AA battery power booster adapter, Wi-AudioLink Rx receiver socket and cable routing management system for the ultimate in BodyFree wireless performance experience. AA battery power booster USB adapter with white LED light for charging and extending Wi-PowerBooster:

the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream transmitters and receivers up to 19 hours. Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream Wi-PowerAdapter:

transmitters. Please visit our web site at www.jangusmusic.com for the optional cable connection accessories 41 Wi-AudioLink GREEN ENVIRONMENT Disposal and Recycling Information!

Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial wastes for disposal. 42 Wi-AudioLink FCC NOTICES Regulatory Compliance Information Compliance Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operations. Disclaimers This manual is published by Jangus Music, Inc. The information contained in this document is subject to change without notice. 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners. 43 w w w . j a n g u s m u s i c . c o m 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.

(Design and specifications subject to change without notice). FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

JM-WAL45 USER GUIDE Wi AudioStream Professional Stereo Digital Wireless Audio Dongles STEREODIGITAL WIRELES Wi-AudioStream CONGRATULATIONS CONGRATULATIONS!

Thank You For Choosing Jangus Music!

Congratulations on your purchase of the Wi-AudioStream Professional Stereo Digital Wireless Audio Dongles. In this manual, youll find information designed to help you understand the capability of your Wi-AudioStream as well as step-by-step explanation on how to install and operate your Wi-AudioStream professional stereo digital wireless audio dongles. Wi-AudioStream TECHNICAL SUPPORT Getting Answers!

We want you to get the most from your new Wi-AudioStream professional stereo digital wireless audio dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions. Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioStream comes with 90 days of telephone support and one year of service coverage. There are may ways to contact Jangus Music customer service support. E-Mail:

Website:

Technical support:

support@jangusmusic.com https://www.jangusmusic.com/support

(949) 526-4877 [949-JANGUS7]

H S I L G N E 3 Wi-AudioStream INTRODUCTION Making Great Musical Gear Better!

Jangus Musics Wi-AudioStream JM-WAL45 professional stereo digital wireless audio dongles solution is the smallest, most advanced cable replacement technology available today that fits on the palm of your hand!

This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure, simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio frequency (RF) interference with other wireless devices, signal loss, crackle or AC hum making it the best wireless solution for live performances and studio recording environments. This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable and provide easy and user friendly way to connect professional musical gear such as Mono and Stereo Ear-

worn or Clip-on Microphones, Acoustic and Wind Instruments Microphones, In-ear Monitors, Studio Monitors Headphones and other analog audio devices to remote and hard to reach equipment such as Mixers, Amplifiers, Speakers, Samplers, Hard Disk Recorders, Computers and more. Simply connect the audio source to the dongle size transmitter audio input jacks then connect the dongle size receiver to the In-ear monitors, Headphones, Mixer, Amplifier, Speaker or computer audio input jacks and you are done!... 4 Wi-AudioStream INTRODUCTION Meeting The Specs!

The Wi-AudioStream transmitter small and rugged design, boasts three (3) different power up modes to support the following instruments connections:

Line-in (Stereo) Stereo Microphones Mono Microphones Each of the power up modes are configured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle. MP3 Mono MIC Stereo MIC Smart Phone Stringed Instruments Mixers DJ Gear Brass Instruments Digital Recorders Woodwinds Instruments Transmitter

(Tx) Receiver

(Rx) Amplifiers Mixers Digital Recorders Headphones &

In-ear Monitors Computers Stereo System Stereo System 5 Wi-AudioStream INTRODUCTION Extreme Flexibility!

The Wi-AudioStream boasts an interchangeable 1/4 (6.35mm) TRS stereo connector jack, 1/8

(3.5mm) stereo miniature jack, 2.5mm subminiature jack and XLR connectors for maximum connectivity with audio devices. The Wi-AudioStream power source flexible design boasts an internal rechargeable battery for 6.5 hours of battery operations, powerful USB bus power connectivity to any USB equipped devices and optional ON-THE-GO AA battery power booster adapter for 19 hours of extended battery operations. 6 RCA 2.5mm Mono 2.5mm Stereo 3.5mm Mono 3.5mm Stereo 6.3mm TSR Mono 6.3mm TSR Stereo XLR Unbalanced 3.5mm Stereo USB Bus Power AA Battery Power Booster Charger Creating Your Audio Matrix!

Jangus Musics built-in digital wireless audio signal patch routing feature allows users to re-rout the audio output signal from their instruments to up to 8 different Rx digital wireless receivers including Jangus Musics JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the Link button located on the transmitter dongle. No more removing the patch-bay devices, disconnecting cables, and flipping I/O circuit boards!

Wi-AudioStream INTRODUCTION Headphone Rx 2 In-ear Monitor Rx 1 Rx 3 Tx 1 Mixer Rx 4 Computer Rx 5 Digital Recorder Rx 6 Compressor/Limiter/

Gate/FX Rx 8 Amplifier Rx 7 7 Wi-AudioStream PACKING LIST What is included in the package?

Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories. m o c

. c i s u m s u g n a j

. w w w Wi-Transmitter Wi-Receiver USB Y-Split Power Cable Universal AC Charger

(QTY 2) 1/4 Mono Male to 1/8 Stereo Male Cable

(QTY 2) 1/4 Stereo Male to 1/8 Stereo Male Y-split Cable User Manual Carrying Bag 8 Wi-AudioStream ABOUT YOUR JM-WAL45 Wi Transmitter 1. Audio IN Jack 2. Power ON/OFF 3. Link / Paring 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute 8. Sleep 9. MIC Mode 10. USB Charging Port 11. Belt Clip j r o n q p l m k Wi Receiver 1. Audio OUT Jack 2. Power ON/OFF 3. Link / Paring / VoIP 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute/ Play/Pause 8. Previous Track 9. Next Track 10. (VoIP) Microphone 11. USB Charging Port 12. Belt Clip 11 s u

y

z w

x v 12 11 9 Wi-AudioStream TRANSMITTER CONTROLS Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter Provide stereo and mono connection for professional vocal and instruments capacitive microphones and any analog devices such as monitoring systems MP3 players, cell phones, stereo systems, computers and more... Transmitter Dongle Controls and Connections j Audio IN Jack:

k Power ON/OFF:

l Power/Status LED: The Power/Status LED display the status of six functions, ON/OFF, Battery Charging, Paring, Microphone Power, Mute and Sleeping mode statuses F Please refer to the Function Matrix Table section of this manual for more details m Volume UP:

n Volume DOWN:

10 Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level Wi-AudioStream TRANSMITTER CONTROLS Press and hold the Mute button for 3 seconds stop the audio transmission F Please refer to the Function Matrix Table section of this manual for more details The Link button performs two functions Paring and Linking. The Paring function allows the transmitter dongle to connect to up to 8 eight different receivers to create you own wireless audio matrix. Press and hold the Link button for 6 seconds until LED flash F Please refer to the Paring Procedures section of this manual for detailed instructions F Please refer to the Audio Matrix Accessories section of this manual for options listing o Mute:

p Link/Pair:

The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. F Please refer to the Function Matrix Table section of this manual for additional information F Please refer to the Audio Matrix Accessories section of this manual for options listing 11 Wi-AudioStream TRANSMITTER CONTROLS Transmitter Dongle Controls and Connections q Sleep:

12 The Sleep function button on the transmitter dongle is designed to prolong the battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use. When the Sleep function on the transmitter is activated, the transmitter dongles sends a signal to the linked receiver dongle to go into a standby mode while switching to full sleep mode. The Sleep mode preserves the audio levels settings on both dongles as well as on the communications link between the transmit and the linked dongle. Press and hold the Sleep button for 3 seconds to switch the transmitter and the receiver dongles onto standby power save mode Press and hold the Sleep button for 3 seconds to wake-up the transmitter and the receiver dongles. F Please refer to the Function Matrix Table section of this manual for more details Wi-AudioStream TRANSMITTER CONTROLS r MIC Power Mode:

s Charging Port:

11 Belt Clip:

The MIC Mode multifunction button allows the user to choose between three different power up modes to support Stereo Capacitive Microphones, Mono Capacitive Microphones and Stereo Line -in to the transmitter dongle. To select the desired operations mode, press the MIC button for 2 seconds and until the blue LED change its flashing sequence then release, To cycle between the three modes, simply press and hold the MIC button and the transmitter will cycle between the three modes along with the Blue LED flashing sequence to each of the modes. Release the mode button once the desired mode setting is reached F Please refer to the Function Matrix Table section of this manual for detailed instructions . The transmitter dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. The transmitter dongle can be attached to guitar strap, belt, shirts and pants pockets. The rigid small size light wight design is easy to ware without impeding your movement. 13 Wi-AudioStream RECEIVER CONTROLS Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter Provide a stereo connection for professional In-ear Monitors, Sound Systems Mixer Samplers, Computers Home Digital Theaters, Headphones and more... Receiver Dongle Controls and Connections u Audio OUT Jack:

v Power ON/OFF:

w Power/Status LED: The Power/Status LED display the status of five functions, ON/OFF, Battery, x Volume UP:

y Volume DOWN:

Charging, Paring, Mute and Sleeping mode statuses F Please refer to the Function Matrix Table section of this manual for more details Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level 14 Wi-AudioStream RECEIVER CONTROLS z Link/VoIP:

This multifunction button performs three functions, Paring, Linking and VoIP MIC activation. The VoIP function is covered in the VoIP Microphone on page 15. The Paring function allows the Receiver dongle to discovered by the Transmitter Dongle. Press and hold the Link button for 6 seconds until LED flash F Please refer to the Paring Procedures section of this manual for detailed instructions F Please refer to the Function Matrix Table section of this manual for additional information The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. The Next Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list. Press the Next Track button once to jump to the next audio track 15

{ Next Track:

Wi-AudioStream RECEIVER CONTROLS Receiver Dongle Controls and Connections

| Previous Track:

} Mute/Pause/Play:

The Previous Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list Press the Previous Track button once to jump to the previous audio track. F Please refer to the Function Matrix Table section of this manual for more details Press and hold this function button for 3 seconds stop the audio transmission F Please refer to the Function Matrix Table section of this manual for more details When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle, the Mute/Pause/Play function will remotely control the media player and sequencing software to mute, pause or play to the audio track Press the Mute/Pause/Play button once to pause or play audio track. Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio F Please refer to the Function Matrix Table section of this manual for more details 16 Wi-AudioStream RECEIVER CONTROLS

~ VoIP Microphone: The Microphone on the Receiver dongle is used with optional PC/MAC USB Transmitter dongle for Voice over Internet Protocol (VoIP) communications. This powerful feature allow musicians to collaborate with each other over the internet F Please refer to the Function Matrix Table section of this manual for more details To activate the VoIP Microphone on the Receiver dongle, press the LINK / VoIP button once. The Blue LED on the reviver will turn ON when the VoIP mIC is activated. VoIP MIC is now ready for use on your PC or MAC with the optional USB Transmitter dongle The receiver dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. The receiver dongle can be attached to, belts, shirts and pants pockets when used with ear-worm MICs or in-ear professional personal monitors. The rigid small size light wight design is easy to ware without impeding your movement. 11 Charging Port:

12 Belt Clip:

17 Wi-AudioStream GETTING STARTED Ready, Charge, Go!

Before using your new Wi-AudioStream professional digital wireless dongles, you need to fully charge the batteries on the dongles for approximately 2 hours. Charging 1. Plug the AC Charger into a power socket 2. Connect the USB Y-Split power cable into the USB port on the AC charger 3. Connect one of the two mini USB connectors into the Transmitter USB port 4. Connect the second mini USB connector into the Receiver USB port 5. The Power/Status LED will turn to solid Red ON 6. When charging is complete the Red LED will turn OFF 7. Remove the charging cable and adapter and store into the carrying case AC Charger USB Connector USB Port L I N K P O W E R USB Port Mini USB Connector 18 Wi-AudioStream PARING Paring the Wi-AudioStream Before using the Wi-AudioStream dongles with your instruments, you need to pair the transmitter dongle with the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle. k v p 1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and holding the POWER button , on each of the dongles for 2 seconds. 2. Press and hold the LINK button on the transmitter (Tx) dongle for 6 seconds. The Power/Status LED on the Transmitter will start flashing. The transmitter dongle is now in a Pairing mode and ready to search for receivers. p 3. Press and hold the LINK button on the receiver (Rx) dongle for 6 seconds. The Power/Status LED on the receiver will start flashing. The receiver dongle is now in a Pairing mode and ready to be found by the transmitter dongle 4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED on both devices will turn to solid Green 5. The Wi-AudioStream transmitter and receiver dongles are now ready for use. z

(Rx) k

(Tx) z v 19 Wi-AudioStream TRANSMITTER CONNECTION Connecting Capacitive Microphones to Transmitter!

The Wi-AudioStream transmitter support Mono and Stereo capacitive microphones connection. 1. First Locate you Ear-worn Microphones or your Mono/Stereo capacitive microphones you wish to connect to the Wi-AudioStream transmitter. Audio Input Jack 2. Connect the 1/8 stereo male end of the MIC cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. 4. Place your Ear-worn MIC on your ear or attache the Mono/Stereo microphones to your shirt, guitar electric acoustic guitar, stringed, woodwinds, brass and other acoustic instruments. 20 Audio Cable Stereo Microphones Belt Clip 5. Verify if you are connecting a Mono or Stereo microphone to the transmitter. Wi-AudioStream TRANSMITTER CONNECTION 5.1 For Stereo Microphones Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the MIC button for 2 seconds until the Blue starts to flash with slow flashes F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs r k 5.2 For Stereo Microphones Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the MIC button for 2 seconds until the Blue starts to flash with fast flashes F The Power Status LED will show Fast Flashing Blue and Solid Green LEDs 6. Attache the Wi-AudioStream to you belt or pocket. F Please proceed to page 27 for the receiver connection k r r

(Tx) k 21 Wi-AudioStream TRANSMITTER CONNECTION Connecting Musical Instruments & Gear to Transmitter!

The Wi-AudioStream transmitter support professional digital instruments connections such as Mixers, JD gear, MP3 player, Stereo systems Computers Media players, Smart Phones, Flat Screen Displays and any device with headphone jack. Audio Input Jack 1. For (Mono) connection locate the 1/4 mono to 1/8 stereo cable For (Stereo) connection locate the 1/4 stereo Y-split to 1/8 stereo cable 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. Audio Cable 1/4 Mono to 1/8 Stereo Cable 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. 22 Belt Clip Wi-AudioStream TRANSMITTER CONNECTION 4. For (Mono) connection, connect the 1/4 mono male end of the cable to the left mono output (L/MONO) located on the back panel of the digital instrument. For (Stereo) connection, connect the two 1/4 male ends of the cable to the left (L/MONO) and right (R) outputs located on the back panel of the digital instrument. 5. Power up the transmitter by pressing and holing the POWER button k for 2 seconds until the Green LED and Blue turn ON F The Power Status LED will show Two Fast Blue LED flashes every 1 second and Solid Blue and Solid Green LEDs 6. Attache the Wi-AudioStream to you belt or pocket F Please proceed to page 24 for the receiver connection Digital Instrument

(R)

(L/MONO) 1/4 Stereo Y-Split to 1/8 Stereo Cable

(Tx) k 23 Wi-AudioStream RECEIVER CONNECTION Connecting Analog and Digital Devices to Receiver!

The Wi-AudioStream receiver support professional digital instruments connection such as Mixers, Amplifiers, Speaker, Samplers, Hard Disk Recorders, Computers, Headphones, In-Ear professional personal monitors, Stereo Systems and more... Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions. If youve connected a stereo audio amp, be aware that playing at high volume may damage your speaker system. Be careful not to raise the volume excessively. Mixers, Amplifiers, Hard Disk Recorders and Effects Pedals Connection 1. For (Mono) connection locate the 1/4 mono to 1/8 stereo cable For (Stereo) connection locate the 1/4 stereo Y-split to 1/8 stereo cable 24 Wi-AudioStream RECEIVER CONNECTION Audio Output Jack 2. Connect the 1/8 stereo end of the cable into the Audio Input jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 4. Connect the 1/4 male end of the cable to the inputs of your amplifier, powered monitor or mixer. If youre using the Wi-AudioStream receiver in stereo, use both the L/ MONO and R jacks on your samples or use two channels on your mixer or hard disk recorder. Input 1/4 Stereo Y-Split to 1/8 Stereo Cable Audio Cable Amp or Power Monitors Amp or Power Monitors Input POWER LINK Belt Clip 25 Wi-AudioStream RECEIVER CONNECTION v 5. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 6. Place the receiver (Rx) dongle on the amp as shown. Alternatively the receiver can be placed next to the Mixer, Digital Recorder or Sound System.

(Rx) z v 7. Power up your Amp, Mixer, Digital Recorder and are you are ready to go!

POWER LINK 26 Connecting Headphones and In-Ear Professional Personal Monitors!

Audio Output Jack Wi-AudioStream RECEIVER CONNECTION PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8 stereo connector end of your headphone or In-Ear personal monitor into the Audio Output jack on the receiver dongle. 1. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable v 1. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. In-ear Personal Monitors Audio Cable v

(Rx) Belt Clip 27 Wi-AudioStream Tx FUNCTION MATRIX Transmitter (Tx) Button Function Matrix!

Function Power ON/OFF Pairing Mode Signal Re-routing Volume UP/Down Mute ON/OFF Button k POWER p LINK p LINK mn o q r r r Hold Time LED Status Activation 3 sec Press and Hold 2 sec Press and Hold Click Click Click for Step, Press and hold for Auto Click Press and Hold 2 sec Solid Green Fast Green Flashes Solid Green Blue Flash Press and Hold Press and Hold MIC Button Press and Hold MIC Button Press and Hold MIC Button 3 sec 2 sec 2 sec 2 sec 2 Green Flashes Solid Green LED and Two Blue LED Flashes Solid Green LED and Slow Blue LED Flashes Solid Green LED and Fast Blue LED Flashes Sleep / Wake up Line in Mode (Stereo)

(Factory setting) MIC Mode 1 (Stereo) MIC Mode 2 (Mono) 28 Transmitter (Tx) LED Indicator Chart!

Function Searching For Receiver Linked to Receiver Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF l l l l l l Wi-AudioStream Tx LED INDICATOR CHART r o n q p l m k 29 Wi-AudioStream Rx FUNCTION MATRIX v z z xy

Pairing Mode Voice Over IP MIC Volume UP/Down Mute ON/OFF Play/Pause Next Track Prev Track 30 Receiver (Rx) Button Function Matrix!

Function Power ON/OFF Button POWER Activation Press and Hold LINK/VoIP Press and Hold LINK/VoIP Click (With Optional USB Tx Dongle) Hold Time LED Status 3 sec Solid Green 3 sec Click Fast Green Flashes Solid Green & Blue Click for Step, Press and Hold for Auto Click Press and Hold Click (With Optional USB Tx Dongle) Click (With Optional USB Tx Dongle) Click (With Optional USB Tx Dongle) 3 sec Click Click Click Solid Green & Blue Receiver (Rx) LED Indicator Chart!

Function Searching For Receiver Linked to Receiver Sleep Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green w w w w w w w 2 Green Flashes (Activated By Tx) Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF Wi-AudioStream Rx LED INDICATOR CHART

y

z w x v 31 Wi-AudioStream PRODUCT SPECIFICATIONS Product Technical Specifications!

Specifications Frequency:

Frequency Response:

Communications Frequency Selection: Auto Select S/N Ratio:

Audio Input / Output:

Max Input Level:

Max Output Level:

Input Impedance:

Output Impedance:

Battery Life:

Battery Type:

2.4 GHz, 16bit, 48KHz Digital Wireless Communications 10Hz to 20Khz More than 90 dB (A-weighted) for stereo line-in mode More than 82 dB (A-weighted) for stereo and mono MIC mode 3.5mm Stereo Jack 2Vrms 700mVrms 3.3K ohm

< 10 ohm 6.5 hours Internal Rechargeable Batteries 32 Wi-AudioStream PRODUCT SPECIFICATIONS Specifications Battery Power Boost:

USB Bus Power Low Battery Alert:

19.5 hours (With optional AA battery power booster adapter) Yes 15 Minutes of Life Left Power-up Modes Antenna:

Range:

Units operating at the same time:

Signal Patch Audio Matrix:

MAC/PC Compatible:

VoIP Capable:

802.11g/n Network Safe:

Transmitter Weight Receiver Weight Dimensions Three (3) Power-up Modes

(Line-in Stereo, MIC Stereo, MIC Mono) Internal Antennas 150 to 300 Feet (May not be dependent on line of sight) 12 One (1) transmitter can re-rout audio signal to eight (8) different receivers Yes (With Optional USB Transmitter Dongle) Yes (With Optional USB Transmitter Dongle) Yes 0.068 lbs 0.056 lbs 1.2 W x 0.6 D x 3.34 H 33 Wi-AudioStream PRODUCT ACCESSORIES Audio Matrix Accessories for Extreme Flexibility!

Accessory Wi-StudioM:

Wi-USB Tx:

Wi-iPod Tx:

Wi-AudioLink Tx:

Wi-AudioStream Tx:

Wi-AudioLink Rx:

34 Specifications Digital wireless studio monitors headphones Digital wireless USB transmitter for MAC/PC audio and VoIP applications Digital wireless transmitter for Apple iPod Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars, Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic Drums, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Digital wireless transmitter for Mono and Stereo microphones and personal monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic, Brass and Woodwind Instruments Microphones, MP3 players and more. Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors, Effects Pedals, Mixers, Amplifiers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Wi-AudioStream ACEESSORIES Specifications Cable & Power Accessories for Extreme Flexibility!

Accessory Wi-BodyFree Guitar Strap: Guitar strap with built-in Wi-PowerBooster AA battery power booster adapter, Wi-AudioLink Rx receiver socket and cable routing management system for the ultimate in BodyFree wireless performance experience. AA battery power booster USB adapter with white LED light for charging and extending Wi-PowerBooster:

the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream transmitters and receivers up to 19 hours. Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream Wi-PowerAdapter:

transmitters. Please visit our web site at www.jangusmusic.com for the optional cable connection accessories 35 Wi-AudioStream GREEN ENVIRONMENT Disposal and Recycling Information!

Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial wastes for disposal. 36 Wi-AudioStream FCC NOTICES Regulatory Compliance Information Compliance Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operations. Disclaimers This manual is published by Jangus Music, Inc. The information contained in this document is subject to change without notice. 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Wi, Digital Wireless Stereo logos and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners. 37 w w w . j a n g u s m u s i c . c o m 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.

(Design and specifications subject to change without notice). FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.