FCC ID: 2AHAS-PCA21001 2.4G mouse

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ3210701-26492E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Operational Principle 1. The 6210 is a member of the low-cost, high-performance family of intelligent 2.4 GHz RF transceivers with embedded microcontrollers. 2. The 6210 is optimized to provide a single chip solution for Ultra Low Power

(ULP) wireless applications. The combination of processing power, memory, low power oscillators, real-time counter and a range of power saving modes provides an ideal platform for implementation of RF protocols. 3. Benefits of using 6210 include tighter protocol timing, security, lower power consumption and improved co-existence performance. For the application layer the 6210 offers a rich set of peripherals including: SPI (master and slave), UART, PWM,, and so on.ANTENNA, The antenna is typically fed from the end of the monopole section by a plated through-hole via which is in turn connected to the RF output on the 2.4GHz band. 4. Frequency List 1CH 2CH 3CH 4CH 5CH 6CH 7CH 8CH 9CH 10CH 11CH 12CH 13CH 14CH 15CH 16CH 17CH 18CH 19CH 20CH 2402 MHz 2404 MHz 2406 MHz 2408 MHz 2410 MHz 2412 MHz 2414 MHz 2416 MHz 2418 MHz 2420 MHz 2422 MHz 2424 MHz 2426 MHz 2428 MHz 2430 MHz 2432 MHz 2434 MHz 2436 MHz 2438 MHz 2440 MHz 2442 MHz 2444 MHz 2446 MHz 2448 MHz 2450 MHz 2452 MHz 2454 MHz 2456 MHz 2458 MHz 2460 MHz 2462 MHz 2464 MHz 2466 MHz 2468 MHz 2470 MHz 2472 MHz 2474 MHz 2476 MHz 2478 MHz 2480 MHz 21CH 22CH 23CH 24CH 25CH 26CH 27CH 28CH 29CH 30CH 31CH 32CH 33CH 34CH 35CH 36CH 37CH 38CH 39CH 40CH