FCC ID: 2AHAS-XLP71009 5 in 1 Lamp & Wireless charger

(Not included in the product, additional purchase required) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. DC 5V/3A,9V/2.22A, 12V/1.67A

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel+1 732-339-9800 Fax: 732-481-0300 E-mailnathans@xtremecables.com Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: 2AHAS-XLP71009 JEM ACCESSORIES INC. certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

Printed Name: Nathan Shamula Title: COO CFR 47 2.911(d)(5)(i) Attestation Letter

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel+1 732-339-9800 Fax: 732-481-0300 E-mailnathans@xtremecables.com Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: 2AHAS-XLP71009 JEM ACCESSORIES INC. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

Printed Name: Nathan Shamula Title: COO CFR 47 2.911 (d)(5)(ii) Attestation Letter

Circuit Description Input: DC 5V/3A,9V/2.22A, 12V/1.67A USB Output: DC 5V/1A Wireless charger output: 5W, 7.5W, 10W, 15W Operation Frequency:

Airpods: 131.32 kHz Phone horizontal: 127.33 kHz Phone vertical: 127.35kHz Conversion efficiency: 50-70%

Charging distance: 1-4mm The working principle of EUT is based on MCU 9C18S +D004 Three coils for transmitting 1. A mobile phone or other load that supports wireless reception is placed at the coil position, wireless charging is turned on, the coil transmit signal and the receiving coil signal are demodulated, and the signal is fed back to 9C18S. It communicates with the charger protocol, which supports fast charging. to 9V, the load supports fast charging, Q003 receives the 9V voltage signal, adjusts the 9V voltage and converts the DC power into an AC pulse signal through the conversion of 2 sets of Q003+P MOS, and transmits it through the coil. 2. A headset or other load that supports wireless reception is placed at the coil position, the wireless charger is turned on, the coil transmit signal and the receiving coil signal are demodulated, and the signal is fed back to SOP-14. SOP-14 and D004 work, and D004 performs high duty cycle. To work, the voltage meets the 5V power supply for wireless charging and transmitting work. JW5065 receives the 5V voltage signal, adjusts the 5V voltage and converts the DC power into AC pulse signal through the conversion of two sets of D004+P MOS, and transmits it through the coil. 3. When connect to DC 5V, can turn on the LED light through the on/off button, it got 3 different light mode, Cold white, Warm white and Warm Yellow.

Office of Engineering and Technology Search|RSS |Updates |E-Filing |Initiatives |Consumers |Find People OET Home Page Site Options Basic KDB Search Advanced KDB Search Submit an Inquiry Reply to an Inquiry Response Category List FAQ Search Major Guidance Publications Draft Laboratory Division Publications Draft Laboratory Division Publications (Expired) Draft Publication Moderation Policy Related Sites Equipment Authorization Presentations Equipment Authorization System (EAS) Telecommunications Certification Bodies (TCB) Measurement Procedures FCC > FCC E-filing > Inquiry System Home Page > View Inquiry FCC Site Map Reply to an OET Inquiry Response Currently Displaying Inquiry Tracking Number: 777275 Contact Information:

Customer First Name: Lea Customer Last Name:

Lena Telephone Number:

18566797043 Extension:

E-mail Address:

cs2.sz3a@baclcorp.com Address:

Line 1:

Line 2:

P.O. Box:

City:

State:

Zip Code:

Country:

Equipment Compliance Review Inquiry Details on 02/20/2024:

First category:

Second category:

Third category:

Subject:

Inquiry:

Wireless Power Transfe Confirm the product whether belong a mobile device Confirm the product whether belong a mobile device, this product wirelss charger with LED Desk lamp, expect used in office desk? pls confirm whether can consinder as mobile device?

FCC Response on 02/26/2024:

Hello. Seems reasonable; however, there was not adequate details shared about the product to make an accurate assessment. For guidance related to Wireless Power Transfer devices please refer to FCC KDB Publication 680106 D01 Wireless Power Transfer v04. This document can be found online at:https://apps.fcc.gov/oetcf/kdb/reports/GuidedPublicationList.cfm Additionally, please refer to the most recent FCC presentation on WPT from the October 2023 TCB Workshop. This presentation is entitled Wireless Power Transfer and is attached to this response. The purpose of the KDB Inquiry system is to provide a forum for questions regarding testing proposals or technologies for which there is no clear guidance. It is not meant to serve as a place for approval of devices that have already been tested according to established guidance. If seeking equipment authorization for your device, you should submit your application to a Telecommunications Certification Body (TCB) for further review. Please refer to the following website for a list of all currently recognized TCBs:

https://apps.fcc.gov/oetcf/tcb/reports/TCBSearch.cfm Thank you.

-OET Lab staff

---Reply from Customer on 02/27/2024---

Hello, Thank you for your replay.This device is a LED desk lamp with wireless charging and clock display. It has two RF coils and the wireless charging only when the active coil is covered and coupled with the target. Product parameter:

Rated Input: DC 9V 3A from USB Airpods Wireless Output: 3 Watts Wireless Charger Maximum Output: 15 Watts Operation Frequency: 110-205 kHz Antenna type: Coil Antenna So the device was considered to meet the 2.1091-mobile conditions, The minimum distance for RF exposure compliance is whether 20cm is allowed?

Please see the attachment:

1. EUT photos 2. User manual Thanks!

FCC Response on 03/06/2024:

Hello. Thank you for providing additional product details. We agree that the device fits the minimum 20cm separation requirement for mobile equipment category conditions. You are authorized to proceed with RFx/EMC compliance testing following appropriate FCC equipment authorization procedures. Thank you.

-OET Lab staff Attachment List:

EUT photo TCBC slides for WPT brief User Manual Enter any additional comments below:

*(This is a text only field. Users will be able to upload attachments after clicking on the "Proceed" button below) Proceed Clear Please use the Submit Inquiry link at www.fcc.gov/labhelp to send any comments or suggestions for this site Federal Communications Commission 45 L Street NE Washington, DC 20554 More FCC Contact Information... Phone: 888-CALL-FCC (225-5322) TTY: 888-TELL-FCC (835-5322) Fax: 202-418-0232 E-mail: fccinfo@fcc.gov

- Privacy Policy

- Web Policies & Notices

- Customer Service Standards

- Freedom of Information Act

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel+1 732-339-9800 Fax: 732-481-0300 E-mailnathans@xtremecables.com FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, JEM ACCESSORIES INC. the undersigned, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Nathan Shamula Title: COO QA-FR-170-B

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel+1 732-339-9800 Fax: 732-481-0300 E-mailnathans@xtremecables.com FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC., hereby declare that we have a product named as 5 in 1 Lamp & Wireless charger (Model No.: XLP7-1009-BLK, XLP7-1009-QV1, XLP7-1009, FCC ID: 2AHAS-XLP71009), all the models are identical in electrically, the difference is model number. No other changes are made on them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature:

Printed Name: Nathan Shamula Title: COO

U.S. AGENT LETTER OF ATTESTATION FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: 2AHAS-XLP71009 JEM ACCESSORIES INC. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. is our designated U.S. agent for service of process for the above referenced FCC ID. JEM ACCESSORIES INC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information:

Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 FRN: 0025209164 Tel.: +1 732-339-9800 Email: 732-481-0300 Signed by (printed name): Nathan Shamula Signature: