FCC ID: 2AHAS-PWC80126 5 IN 1 MULT-DEVICE CAHARGING STATION

127 mm 76mm

~ 2, electronic necessities 51N1 MULTI-DEVICE CHARGING STATION WITH WIRELESS CHARGING PAD

. Double Sided, Black and White Copy MANUAL Introduction Thank you for purchasing our 5in1 Multi-Device Charging Station. Save space while charging 5 devices simultaneously. Features

+ Space saving, charge up to 5 devices simultaneously

(Max 3.4 Amp shared output) Charging multiple devices simultaneously may increase time needed for charging

+ Compatible with wireless charging smartphones, USB devices, Apple Watch, and Apple AirPods

(Generation 1, Generation 2 and Airpods Pro )

+ Built-in wireless charging pad with 5W output

+ Connect your Apple Watch and AirPods charging cables (not included) to charge your devices

+ LED indicator illuminates blue and red when charging

+ Includes 2ft 3.5Amp USB Type-C cable to power station Wireless Charging Compatible Smartphones:

(Including but not limited to...) iPhone 8 Samsung Galaxy $6 Edge Plus Samsung Galaxy Z Flip iPhone 8 Plus Samsung Galaxy S7 LG G2 iPhone X Samsung Galaxy $7 Active LG G3 iPhone Xs Samsung Galaxy $7 Edge LG G6"

iPhone Xs Max Samsung Galaxy 8 LG G6 Plus iPhone Xr Samsung Galaxy $8 Active LG G7 iPhone 11 Samsung Galaxy S8 Plus LG G7 Thind iPhone 11 Pro Samsung Galaxy Note 8 LG Lucid 2 iPhone 11 Pro Max Samsung Galaxy $9 LG Lucid 3 iPhone SE (2020) Samsung Galaxy 59 Plus LG Optimus F5 Google Nexus 4 Samsung Galaxy Note 9 LG Optimus G Pro Google Nexus 5 Samsung Galaxy $10 LG Optimus It L-O5E Google Nexus 6 Samsung Galaxy $10e LG Spectrum 2 Google Pixel 3 Samsung Galaxy $10 Plus LaVvu2 Google Pixel 3 XL Samsung Galaxy Note 10 LaVu3 Google Pixel 4 Samsung Galaxy Note 10 Plus LG V30 Google Pixel 4 XL Samsung Galaxy Fold LG'V30 Plus Samsung Galaxy S6 Samsung Galaxy S20 LG V40 Thind Samsung Galaxy S6 Active Samsung Galaxy 520+ LGV50 Thind Samsung Galaxy S6 Edge Samsung Galaxy 520 Ultra (5G) LG V60 Thin Step 1 Insert official Apple Watch charger into the cavity. et ae V/

4 Press firmly into mold. Step 2 Insert official Apple Lighting cable for your Airpods into the silicone holder. _:

y"

Ww Gently force the lighting cable head into the silicone holder opening until the lightning connector protrudes from the top and is flush with the surface . Step 3 Insert the USB end into the USB ports on the inside of the charging station, and organize cables as shown.

Be sure to organize and tuck the cables in so that they are not protruding or the holder may not sit on the charging base properly. Due to the limited space, it is suggested that the original cables provided with your Apple devices should be used. Step 4

* To power the station, plug the included USB-C cable into the Type-C port labeled input and plug the other end of the usb cable into a USB Wall Adapter. Then plug the USB wall charger into power outlet.

* The transparent divider LED lights will illuminate blue and the wireless charging LED indicator will flash blue and red, indicating that the charging station is powered on.

+ See below for USB Charger power requirements. Note: For optimal charging, a 5V 3.1amp rated USB Wall adapter should be used. Charging more devices at the same time may cause longer charging times. For best charging performance and faster charging times an 18W QC 3.0 USB wall adapter should be used. Using a USB wall adapter that is below 3.1Amp rating may result in improper charging Wireless Charging Place device on wireless charging area to initiate wireless charging. LED indicator will illuminate red indicating the device is charging. Wall/Home Charger Requirements See chart below for the most suitable wall/home charger

(not included) to use with your 5in1 Charging Station. Input Ouput(Shared) Charging Speed 5V 1A (5W) 5V 0.9A Max Insufficient 5V 2A (10W) 5V 1.9A Max Slower 5V 3A (15W) 5V 3.1A (15.5W) 5V 3.4A (17W) 5V 3.5A (17.5W) 5V 2.9A Max Slow 5V 3.0A Max Medium 5V 3.3A Max Fast 5V 3.4A Max Faster Removing Your Airpods Use both hands to properly remove Airpods from the cradle. Hold down the airpod cradle while pulling up on the Airpods to prevent lifting. Important Safety Information CAUTION:

Use this only as intended. To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use within a meter of any water such as swimming pools, bathtubs or sinks. To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only. Never insert objects of any kind, other than authorized item into the product as they may touch dangerous voltage points or short out parts that could result in fire or electrical shock. Do not dispose of this product in fire. Refer to local country, state and city guidelines for appropriate methods of battery disposal. This product contains small parts that may cause choking if swallowed. Not intended for use by children under 3 years of age.

- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device Must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

+ Increase the separation between the equipment and receiver.

+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Specifications:

Input: 5V=3.5A Output: 5V =3.4A Max Distributed by Jem Accessories, Inc. Apple, iPhone, Apple Watch, AirPods and i0S are licensed p54 or registered trademarks of Apple Inc. Jem Accessories is not FC affiliated with Apple Inc. _

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Circuit description 1. Power is supplied to the motherboard through the 5V/4A power adapter (USB1), and the blue LED indicator of the motherboard lights up, the motherboard USB2, USB3, output 5V voltage, USB3, USB4 on the USB board also output 5V voltage, the wireless charging board is also 5V input, and the standby light of the wireless charging lights up, showing blue. 2. The wireless charging starts to detect whether the circuit is working normally through the main control U1 (MCU) chip. It is equipped with two MOS tubes to achieve power output. At the same time, the wireless coil is oscillated through capacitive coupling, and the coil is given a signal to automatically identify the wireless charging of the mobile phone. 3. The output of all USB ports is connected in parallel, the total voltage output is 5V, the total current cannot exceed the current of the external adapter, and the output current of a single USB port cannot exceed 2A.

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison, NJ 08817,United States Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com Date: 07/17/2020 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC. hereby declare that we have a product named as 5 IN 1 MULT-DEVICE CAHARGING STATION,

(Model No: PWC8-1026-WHT, FCC ID: 2AHAS-PWC80126) was tested by BACL, meanwhile, for our marketing purpose, we would like to list a series model XWC8-1026-WHT,XWC8-1026-BLK,PWC8-1026-

BLK on reports and certificate, all the models are identical schematics, except for the difference of model No.and color , And no other changes are made to them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature:

Printed Name: Eli Dabbah Title: Manager

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison, NJ 08817,United States Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com FCC Authorization 15/07/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, JEM ACCESSORIES INC. the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Eli Dabbah Title: Manager QA-FR-170-B