FCC ID: 2AHASBT17 Bluetooth Audio Transmitter & Receiver

Bluetooth Audio Transmitter &Receiver

- a multifunctional audio adaptor for home appliances BT17 User Guide Introduction Thanks for choosing our audio streaming box. This is a multifunctional audio adaptor for home audio system. You can use it as a transmitter to wirelessly stream audio from your TV to Bluetooth headphones/speakers, or as a receiver to enable your soundbar/home theatre to receive music streamed from your phone. If you want to have a better experience, please read this instruction carefully. Packing Content:

1. Bluetooth Transceiver 2. 1X Optical Audio Cable 3. 1X 3.5mm Audio Cable 4. 1X 3.5mm to RCA Audio Cable 5. 1X Type-C Power Cable Features:

1. 2-in-1 Bluetooth transmitter and receiver | Make your home entertainment system wireless. 2. Simultaneously stream audio to one or two Bluetooth headphones or speakers without delay. 3. Turn your wired speakers, CD players or any non-Bluetooth devices into wireless. 4. Compatible with most of TVs on the market with Optical and AUX audio jacks. 5. 1.8' LCD display and big rotary knob upgrade operation experience, easy to use and farewell blind connection. 6. Unique bypass function allows you enjoy TV via non Bluetooth headphones and speakers. 7. Adopt advanced Bluetooth technology 5.0, fast pairing and auto reconnect. Specification:

Bluetooth version: Actions V5.0 Bluetooth frequency: 2402-2480mHz Bluetooth TX/RX distance: 10M no object Bluetooth audio technology: SBC Dual stream: yes, can contact two devices at once TX/RX mode interface: Aux/OPT Bypass model interface: Aux/OPT Display size: 29*46*1.7MM Microphone: No Battery: No Charging interface: Type-C 5V Product size: 112.5*84*32.7mm Product weight: 70.1g Materials: ABS +PC Compatibility:

This device can be paired with most of Bluetooth headphones in the market. Each time can be connected with one/two Bluetooth headphones or speakers. Precautions:

Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in damage to this or attached products. To ensure the products work well, please DONT:

Get the Adaptor wet Drop the Adaptor as this will invalidate your warranty Open up the Adaptor. There are no user serviceable parts inside Expose the Adaptor to extreme temperatures or rapid changes of hot to cold or vice versa Please DO:

Clean the Adaptor with a soft dry cloth and no detergents Product Overview:

Power on/off Bluetooth Pairing/Re-pairing Mode Switch (TX/RX/BYPASS) Search and pair Bluetooth devices (TX mode) MFB ( RX: Pause/ Volume+/-; TX: Up/Down/Confirm ) Type-C charging port Output (RX mode) Input (TX mode) Operating Instructions:

Power on Bluetooth Transceiver BT17 Connect Bluetooth transceiver with a Type-C cable included. You may use either a USB port on your TV or a wall plug (via a USB adapter that supports 5V) Press and hold for 3 seconds to power on the Bluetooth transceiver. Preparation before setup 1. or sound system,) please refer to context of use 1;

If youre using it as a Bluetooth receiver (Bluetooth-enabling your speaker 2. If your TV is connected to your sound system (e.g. Sound Bar, AV receiver, external speaker) already, please use bypass feature and refer to context of use 2;

3. If youre only using it with your TV, please refer to context of use 3. Context of Use 1: Using as a Bluetooth Receiver (RX mode) 1. Switch Bluetooth Transceiver to RX mode, RX will be shown on the screen;

2. Connect with speaker/ Soundbar-

With 3.5mm Audio Cable With 3.5mm to RCA Audio Cable With Optical Audio Cable 3. Turn on the Bluetooth on your phone or other device and search for BT17- tap to connect;

4. Once connected, the name of mobile phone or Bluetooth device will be shown on the screen;

5. Press the MFB to pause the music or clockwise/anti-clockwise rotate to increase/decrease the volume. Please note:

a. Bluetooth transceiver can connect two mobile phones/devices at the same time. b. The transceiver will automatically reconnect to the most recently connected two devices once the Bluetooth of that device has been switched ON. c. Press Bluetooth button to disconnect current paired devices. Fig 1: Set up Bluetooth transceiver as Bluetooth Receiver Context of Use 2: Connect Bluetooth transceiver to your TV (BYPASS mode) Bypass mode allows you to use the Bluetooth transceiver and the Sound bar/Sound System at the same time. 1. Press to switch the Bluetooth transceiver to bypass mode, BYPASS MODE will appear on the screen. 2. Connect TV and sound system referred to Fig 2. Please make sure that you use the same type of input / output, e.g:

to connect to sound system. RCA cable to connect to sound system. If youre using the AUX/RCA cable to connect to TV, please use AUX/

If youre using the OPTICAL cable with TV, please use OPTICAL cable Fig 2: Connect to Bluetooth Transceiver to Sound System (BYPASS mode) Context of Use 3: Connect Bluetooth transceiver to your TV/audio source and Bluetooth headphones/speakers (TX mode) 1. Press to switch Bluetooth transceiver to TX mode, TX will appear on the LCD screen 2. Power on Bluetooth headphone/ speaker and set them in pairing mode. 3. Keep them close to each other and wait. The name of searched Bluetooth headphone/speaker will appear on the screen. 4. Press the MFB to confirm and a voice prompt will let you know the connection is successful. How to connect the second headphone/speaker:

1) Enter the second headphone into pairing mode. 2) Press Bluetooth button to search devices. 3) Press the MFB to confirm How to choose the paired Bluetooth headphones/speakers:

1. Press Bluetooth button to disconnect current two paired devices. 2. The transceiver will automatically enter searching mode and all searched devices name will appear on the screen. (One page only can show four device name) 3. Clockwise/anti-clockwise rotate the MFB to choose the device you need then press to confirm. How to automatically connect two Bluetooth headphones/speakers:

Press to disconnect current two paired devices and automatically enter searching and connecting model. Once connected, two devices name will appear on the screen. Please note:

1. The transceiver will automatically reconnect to the recently connected two headphones/

speakers once they are on pairing mode. 2. Please choose correct output before connecting. (refer to fig 3) Fig 3: Set up Bluetooth transceiver as Bluetooth transmitter FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Appendix FCC ID Label FCC ID: 2AHASBT17 Model: BT17 Size for the label: 20mm X 20mm FCC ID: 2AHASBT17 TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID: 2AHASBT17 TB-RF-074-1.0

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison New Jersey United States Date: 2021-12-29 FCC ID: 2AHASBT17 Dear Sir/Madam, We, JEM ACCESSORIES INC. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Bluetooth Audio Transmitter & Receiver Model no.: BT17, MBA9-1011-BLK Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Eli Dabbah/Manager JEM ACCESSORIES INC. 32 Brunswick Avenue Edison New Jersey United States 908-222-7501 908-222-7504 elid@xtremecables.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-12-29>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AHASBT17 Model name BT17 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Eli Dabbah/Manager Company:

Address:

Phone:

Fax:

E-Mail:

JEM ACCESSORIES INC. 32 Brunswick Avenue Edison New Jersey United States 908-222-7501 908-222-7504 elid@xtremecables.com

JEM ACCESSORIES INC. 32 Brunswick Avenue Edison New Jersey United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2021-12-29 We, JEM ACCESSORIES INC. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AHASBT17 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Eli Dabbah/Manager JEM ACCESSORIES INC. 32 Brunswick Avenue Edison New Jersey United States 908-222-7501 908-222-7504 elid@xtremecables.com