BLUETOOTH HANDSFREE CAR KIT with noise cancellation technology Model: BT10M User Manual Brief Introduction Packing contents:
Bluetooth device User manual Thanks for choosing our Bluetooth FM Transmitter. This device streams music and call directly from your Bluetooth devices to your car FM stereo system. The separated microphone provides you with an amazing hands free function and it is also with a Micro SD card/USB Disk slot that lets you enjoy favorite MP3 and WMA tunes by your cars stereo system. Please read the user manual carefully before using. Hope this device makes your driving more interesting and safer. Hook and loop fastener Specification:
Bluetooth version: Action V5.0 Bluetooth protocol: AVRCP,HFP,A2DP Frequency range: 88.1-107.9MHZ Frequency stability: 10ppm Product input:12-24V Charger output: 5V/1A +5V/2.4A Music format: MP3, WMA, WAV, FLAC Micro SD card (Max capacity): 64GB USB disk (Max capacity): 64GB Transmit Distance: about 3m Bluetooth Distance: about 5m Product size of FM transmitter: 43*38*76mm Product size of Microphone: 38*20*9mm Length of cable:60cm Product weight: 37.8g Material: ABS Features:
1. Wirelessly transmits phone call & audio streaming to the car FM stereo system via Bluetooth. 2. Switches to handsfree mode automatically from music streaming status when receiving phone call. 3. Better voice pickup cable incorporated. 4. Dual USB ports output: DC 5V/3.4A (in total). 5. Detect and display the voltage of car battery when powered on. 6. Full 206 channels optional from 88.1-107.9MHz. 7. Support micro SD card & read USB disk. 8. Quick Siri/Google Assistant activation. 9. User-friendly switch to private call. 10. Hook and loop fasteners. Compatibility:
This device can be paired as a hands free kit with any compatible Bluetooth enabled devices. Precautions:
Please read all safety instruction and warnings carefully before using this product. Improper use of this product may result in damage. To ensure it works well, please never use this in the following conditions :
1. Moist or underwater conditions. 2. Conditions near heater or high-temperature service. 3. Conditions with direct and strong sunshine. 4. Conditions with apt falling. 5 Never dismantle the product without due permission, otherwise it may nullify the warranty clause. Product Overview:
Using FM Transmitter function:
1. Plug the FM transmitter into your vehicles cigarette lighter or power port. The LED displays the voltage of car battery for 2 seconds. Then the device enters into Bluetooth pairing mode, LED also displays bt. 2. Tune your radio to an unused FM frequency, then match the same frequency of this unit. 3. Insert a micro SD card/USB disk containing MP3 files into micro SD card/USB disk slot of this unit and it will play and transmit the MP3 files automatically. Using Bluetooth function:
1. Paste 3M Adhesive Tape on the place you need. 2. Using Bluetooth for the first time, you need to pair your mobile phone with this unit. Activate your mobile phone's Bluetooth function, then search new device. When the mobile phone detects this unit (named as "BT10M"), please pair or connect by using the original password "0000". 3. In the music playing mode, when there is an incoming call, this unit will automatically switch to telephone mode. 4. On music playing mode, press the Play/Pause and hold for 2 seconds to switch modes between Bluetooth and Micro SD card/USB disk reading. Bluetooth calling:
1. Please press to answer the incoming call or hang off a call. 2. Please press and hold for 2 seconds during call to reject the incoming call in Bluetooth calling mode. 3. Please press twice to dial the last number automatically. 4. When the call connected , long press to switch a private call. Using USB charger function:
Connect the USB Charger port (two ports both ok) to your mobile phone, with a USB cable (not included) when this product powered from car lighter socket, The product will serve as mobile phone charger. Please note: The maximum output of right USB port is 1mAh;
The maximum output of left USB port is 2.4mAh;
Read MP3/WMA/ WAV/ FLAC files in USB disk by right USB port. Siri/Google assistant activation:
When Bluetooth is connected successfully, press activate Siri/Google assistant of your mobile phone. and hold 2 seconds to quick Quick Guide:
Operation Guide On FM transmitter 1. Answer / hang up the call:
Press "
" button: answer the call Press "
" button: hang up the call 2. Ignore call Press and hold for 3 seconds to reject incoming calls 3. Call last Number Press twice to dial the last number automatically. 4. Private calling When answering a call ,press to private call mode. and hold for 3 seconds to switch 5. Play and Pause the music:
Press Button: Play the music Press Button again: Pause playing Press CH first 7. Set frequency:
Then press
: increase the frequency 8. Choose music:
Or press
: decrease the frequency Press button: play the next song Press button: play the previous song 9. Music sources switch:
Press between Bluetooth and Micro SD card/USB disk reading button and hold for 2 seconds to switch modes 6. Adjust the Volume:
Press Press and hold for 2 seconds to increase the volume and hold for 2 seconds to decrease volume 10. Activate Siri/Google assistant Long press Bluetooth connected to quick activate Siri/Google assistant under NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.