FCC ID: 2AHAS-PBA9-1007 Bluetooth Receiver

a electronic BLUETOOTH? ADAPTER WIRELESS AUDIO RECEIVER LED indicator Package Contents:

3.5mm Male to Male Aux Adapter Micro USB Charging Cable Manual 11. Charge your new Bluetoottt Adapter Wireless Audio Receiver by connecting the included micro USB cable to a USB power outlet (not indluded). Please allow approximately 3 hours for afull charge. 2. Tum Bluetoottf Adapter on by holding the muttfunction button untl the LED indicator flashes red and blue. Plug headphones or stereo input into the jack. Please utilize the induded adapter as needed. 3. The Bluetoottf Adapter will enter pairing mode. Allow your device to be discoverable and search for the pairing name

"BT Receiver" and select it on your device. Once the Bluetoottt Adapter is uccesfully connected, the LED indicator wil stop flashing and remain solid blue. The Bluetoottt Adapter will automatically switch to"phone mode" when receiving calls and switch back tomusic "mode"

when your phone call has ended. CARE AND MAINTENANCE Wipe the product with a damp dloth and dry thoroughly Store the product in a dry area Do not place the device on or near any hot surfaces Please keep this manual in a safe please for future reference IMPORTANT Do not use the product it has been damaged in any way Donnot use the speaker for anything other than its intended use Keep out of reach of children as this product is not a toy FCC Compliance This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications, not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the fllowing measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dfirent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement To satisfy FCC's RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is, not recommended. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200824830-RF EXHIBIT A - LABELING AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

JEMACCESSORIESINC. Add:32BrunswickAvenueEdison,NJ08817,UnitedStates Tel9082227501 Fax: 908.222.7504 Emailelid@xtremecables.com Date:2020/09/16 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 DearSir/Madam, We,JEMACCESSORIESINC.herebyauthorizeBayAreaCompliance LaboratoriesCorp. toactasalaboratoryfortestingandtestreportgenerationforthe followingproject(s):

(Productname:BluetoothReceiver Modelnumber:PBA91007BLK,FCCID:2AHASPBA91007) The RF chip, model AC6969A supports BDR (GFSK), EDR (/4DQPSK, 8DPSK), and BLE functions. For use in USA and this chip will not support/enable BLE function. The BLE functionhasbeenshieldedbythemanufacturerusingthesoftware. Sincerely, Signature:

PrintedName: EliDabbah Title: Manager

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison, NJ 08817,United States Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com Date:2020/09/18 ProductSimilarityDeclaration ToWhomItMayConcern, We,JEMACCESSORIESINC.herebydeclarethatwehaveaproductnamedasBluetoothReceiver

(ModelNo:PBA91007BLK),FCCID:2AHASPBA91007,wastestedbyBACL,meanwhile,forour marketingpurpose,wewouldliketolistaseriesmodelXBA91007BLK,ABA91003BLKonreportsand certificate,allthemodelsareidenticalschematics,exceptforthedifferenceofmodelNo.,Andnoother changesaremadetothem. Weconfirmthatallinformationaboveistrue,andwellberesponsibleforalltheconsequences.Please contactmeifyouhaveanyquestion. Sincerely, Signature:

PrintedName:EliDabbah Title:Manager

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison, NJ 08817,United States Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com FCC Authorization 2020/09/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, JEM ACCESSORIES INC. the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Eli Dabbah Title: Manager QA-FR-170-B

Circuit Description The 24MHZ crystal oscillator drives the base of Y1. The modulation provided by AC6969A (U1). The output of AC6969A module (U1)has the matching network consisting of J1 that limit the harmonic content and effect the proper coupling of the antenna to the output stage. Antenna, Ground and Power Source The antenna consists of a 2.4GHz PCB antenna There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 3.7 Volt primary battery Feature:

Frequency Range: 2402MHz-2480MHz Antenna Type: PCB Antenna Crystal: 24MHz