FCC ID: 2AHASXHS7-2001 SM WINDOWDOOR SENSOR

(XTREME"

CONNECTED HOME YOCTREME nna Smart WiFi Window/Door Sensor MANUAL XHS7-2001-WHT GETTING STARTED Thank you for choosing the Xtreme Connected Home Window/Door Sensor. This quick start guide will help you with setup and installation. ESTIMATED SETUP Package Includes: 5-10 minutes Quick START GUIDE e Smart Window/Door Sensor e Quick Start Guide What You Need:

> 2.4Guz 5Guz v x App 2.4GHz WiFi Before setup, make sure your phone is connected to the 2.4GHz WiFi network that your device will be placed on. You may also need to turn on location and Bluetooth to find nearby networks. g x CONNECT THE DEVICE STEP 1 Download the free Xtreme Connected Home app from the App Store (for iPhones) or Google Play Store (for Android phones). a1 =

< search Xtreme Connected

> aa PLY rere Comectes :

scnarne | oon se What's New Version History

=a Appi STEP 2 Make sure your mobile device is connected to your 2.4GHz WiFi network. Open the app and click Register by following the on-screen instructions. After your initial sign in, your app will remember your password and log you in automatically. You can also choose to manually log out under Settings in the Main menu. Register by Email Click Get Verification Code 4S a Register You may need to check your Spam folder for the verification code STEP &

Confirm that the displayed WiFi network is your 2.4GHz WiFi network, enter your WiFi password and click Confirm. Confirm WiFi Enter and Click w24 o-

Cancel => WiFiName Select 2.4 GHz Wi-Fi Network a and enter password. Common router setting method Wir aache WifiName Help: If you need information about 2.4GHz WiFi networks, Click the link to go to our Connect FAQs on our website. STEP 7 Your Smart Window/Door Sensor will now be connected to the network. Confirm the settings for your device and then Click Done. TIP: You can put your camera directly in a room by selecting one of the available rooms. Click the 2 button to change the name of the product. PROCESSING TIME Bx 100%0 Connecting... Added successfully device as ft) San Windoo' Sosor Your Xtreme Connected Home Smart Door/Window Sensor is now ready to use. You can now view the sensor remotely and receive mobile alerts. We hope you enjoy using your Xtreme Connected Home Smart Door/Window Sensor. For frequently asked questions and instruction videos, please visit our website at www.xtremeconnected.com. INSTALLATION 1. Insert 2 AAA batteries (not included). 1. Install the sensor in desired location with double sided mounting tape.

Double Sided Mounting Tape oe STEP 3 Remove back cover by pressing the button on top of the sensor and pulling back on the cover. Power with 2 AAA batteries (not included). The indicator light on the sensor should start blinking RED for pairing mode. LED Behavior Device Status Pairing Mode Starting Up Attempting to Pair Connected Blinking Solid Blinking Solid Blue If the LED is not blinking, then you are not in pairing mode. Reset the sensor by pressing the reset button for 5 seconds until you hear the camera make a chime sound. Reset a aa button : Cc

STEP 4 After logging in, click + on the top right of the screen and select "Add device". Select 7 Click e206

@ Add Device OF 51.0%) 4 Smie 80F

& Create Scena allDevices allooviees LEGAL & WARRANTY To see Warranty information and Certification Legal warnings, please see our website. www.xtremeconnected.com Message and Data rates may apply. If you have any questions about this product contact the manufacturer for support, do not return to retailer. Referenced brands and trademarks are for compatibility listing only, not associated with this product. iPhone is a trademark of Apple INC., registered in the US and other countries. App store is a service mark of Apple Inc. Google Play and Google Play logo are trademarks of Google Inc. 2022 Google Inc. All rights reserved. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. FCC Compliance This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. STEP 5 Select Sensor category and confirm the indicator light is Still rapidly blinking. Click Confirm indicator rapidly blink. Select YT 2 Bulbs Sensors Help: Switch between pairing modes. See troubleshooting page 8. Reset the device first. Confirm Confirm indicator rapidly blink Next TROUBLESHOOTING HAVING TROUBLE WITH SETUP?

Dont return this product to the retailer, were here to help. Please call us at 855-999-8041 or visit www.xtremeconnected.co!

for video tutorials, updated manuals and more FAQs for your device. My device won't connect to my network!

1. Make sure you are connected to your 2.4 GHz network and your device is blinking red before you start trying to connect your device. 2. You may need to reset your device if you are having trouble. Check out page 2 for the location of your device's reset button. 3.To allow the app to locate the network, you may need to allow permissions for location and turn on your Bluetooth. 4. If you are not certain what type of network you have, contact your Internet Service Provider and ask them to create a separate, dedicated 2.4GHz network. You can also do this manually in your router's settings. 5. Try moving to a spot closer to your router for connecting. 6. You can also purchase a WiFi extender to increase your WiFi range and strength. 7. In some cases, you can try using the secondary pairing mode by clicking EZ Mode on the Add Device screen (see screenshot on bottom of page 3 for reference). Follow the on-screen instructions. MPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA221129-57878E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com Attestation Letter Date: 2023/02/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: 2AHASXHS7-2001 JEM ACCESSORIES INC. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Contact Person: Eli Dabbah Title: Manager Company Name:JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 QA-FR-1006-A RC 02-08-2023 CFR 47 2.911(d)(5)(i) Attestation Letter

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com Attestation Letter Date: 2023/02/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: 2AHASXHS7-2001 JEM ACCESSORIES INC. (the applicant) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Contact Person: Eli Dabbah Title: Manager Company Name:JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 QA-FR-1007-A RC 02-08-2023 CFR 47 2.911 (d)(5)(ii) Attestation Letter

working principle description The XHS7-2001-WHT is a Smart Window / Door Sensor. It contains an RF module: CBU. Power with DC 2*1.5V AAA batteries. CBU is a Wi-Fi+BT module which supports 2.4GHz only with 802.11b/g/n , BLE 1M mode. It has a simple MCU BK7231N with 3.3v DC power supply and once power on, it could connect the AP or station directly. This module works with a 26MHz crystal, and has a 2MB flash, 5 PWM1ADC interface. Besides these, it can apply with 2.4GHz PCB antenna or external antenna. The basic function description is as below:

Modulation Technique:

802.11b: DSSS (CCK, QPSK, BPSK) 802.11g/n (HT20, HT40): OFDM (64QAM, 16QAM, QPSK, BPSK) BLE: GFSK Antenna Type:

Antenna Gain:

Crystal:

Frequency Range PCB Antenna 2.21dBi 26MHz BLE: 2402-2480MHz Wi-Fi: 2412-2462MHz

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com FCC Authorization 2022/12/27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, JEM ACCESSORIES INC. the undersigned, hereby authorize Shenzhen Accurate Technology Co.,Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co.,Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Eli Dabbah Title: Manager

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel908-222-7501 Fax: 908.222.7504 E-mailelid@xtremecables.com Attestation Letter for Agent 2023/02/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: 2AHASXHS7-2001 JEM ACCESSORIES INC. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. is our designated U.S. agent for service of process for the above referenced FCC ID: 2AHASXHS7-2001. JEM ACCESSORIES INC. agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Company name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Contact person: Eli Dabbah Tel: 908-222-7501 Email: elid@xtremecables.com Sincerely, Applicant Name JEM ACCESSORIES INC. Applicant Printed Name Eli Dabbah Applicant Signature QA-FR-1004-A RC 02-08-2023