FCC ID: 2AHAS-LOCATORTAG Smart Mini Tracker for Pets

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes. ITEM#: XPT6-1001-WHT, XMF8-1001, XMF8-1002, XPT6-1001-BLK, XMF8-1001-BLK, XMF8-1001-WHT,XPT6-1001,ATR2-1000-WHT

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: 732-339-9800 Fax: 732-481-0300 E-mail: nathans@xtremecables.com Attestation Letter Date: 2024/01/02 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: 2AHAS-LOCATORTAG JEM ACCESSORIES INC. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

Nathan Shamula Digitally signed by Nathan Shamula DN: cn=Nathan Shamula, c=US, email=nathans@xtremecables.com Reason: I agree to the terms defined by the placement of my signature on this document Location: New Jersey Date: 2024.01.02 17:42:53 -05'00'

Contact Person: Nathan Shamula Title: COO Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 CFR 47 2.911(d)(5)(i) Attestation Letter

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: 732-339-9800 Fax: 732-481-0300 E-mail: nathans@xtremecables.com

Attestation Letter Date: 2024/01/02 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: 2AHAS-LOCATORTAG JEM ACCESSORIES INC. (the applicant) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

Nathan Shamula Digitally signed by Nathan Shamula DN: cn=Nathan Shamula, c=US, email=nathans@xtremecables.com Reason: I agree to the terms defined by the placement of my signature on this document Location: New Jersey Date: 2024.01.02 17:43:09 -05'00'

Contact Person: Nathan Shamula Title: COO Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 CFR 47 2.911 (d)(5)(ii) Attestation Letter

Operational Description:

This Product adopts Bluetooth 5.2 communication protocol, and connect iphone with Find My APP, so as to find each other and prevent loss. The Bluetooth solution uses ST17H65 as the CPU, with flash and reset chip to realize the pairing and mutual search of Bluetooth products. Crystal provide the 16MHz surge for the CPU. The Bluetooth antenna frequency band is 2402MHz 2480MHz with 40 channels, support BLE 1Mbp & 2Mbp & 125Kbp & 500Kbp, Modulation Type: GFSK. Secondly, the product is equipped with CR2032 DC 3V battery. In addition, the products is also equipped with an efficient operational amplifier to drive the sound device ,so that the product can have a good experience in the client.

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: 732-339-9800 Fax: 732-481-0300 E-mail: nathans@xtremecables.com FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024/01/02 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC. hereby declare that we have a product named as Smart Mini Tracker for Pets (Model No.: XPT6-1001-WHT, FCC ID: 2AHAS-LOCATORTAG) was tested by China Certification ICT Co., Ltd (Dongguan), meanwhile, for our marketing purpose, we would like to list a series model No.: XMF8-1001, XMF8-1002, XPT6-1001-BLK, XMF8-1001-BLK, XMF8-1001-WHT, XPT6-1001, ATR2-1000-WHT on reports and certificate, all the models are identical in electrically, except below differences, And no other changes are made to them. Model No. XPT6-1001-WHT XPT6-1001-BLK XPT6-1001 XMF8-1001 XMF8-1002 XMF8-1001-BLK XMF8-1001-WHT ATR2-1000-WHT Description

Same samples, black exterior case Same samples, different logos Same samples, different logos Same samples, different logos Same samples, black exterior case , different logos Same samples, different logos Same samples, under licensed brand We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature:

Nathan Shamula Digitally signed by Nathan Shamula DN: cn=Nathan Shamula, c=US, email=nathans@xtremecables.com Reason: I agree to the terms defined by the placement of my signature on this document Location: New Jersey Date: 2024.01.02 17:44:02 -05'00'

Printed Name: Nathan Shamula Title: COO

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: 732-339-9800 Fax: 732-481-0300 E-mail: nathans@xtremecables.com 2024/01/02 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, JEM ACCESSORIES INC. the undersigned, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Nathan Shamula Digitally signed by Nathan Shamula DN: cn=Nathan Shamula, c=US, email=nathans@xtremecables.com Reason: I agree to the terms defined by the placement of my signature on this document Location: New Jersey Date: 2024.01.02 17:41:12 -05'00'

Printed Name: Nathan Shamula Title: COO QA-FR-170-B

U.S. AGENT LETTER OF ATTESTATION Date: 2024/01/02 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: 2AHAS-LOCATORTAG JEM ACCESSORIES INC. (the Applicant) certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. JEM ACCESSORIES INC. (the Applicant) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information:

Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 FRN: 0025209164 Tel.: 732-339-9800 Email: nathans@xtremecables.com Signed by (printed name): Nathan Shamula Signature:

Nathan Shamula Digitally signed by Nathan Shamula DN: cn=Nathan Shamula, c=US, email=nathans@xtremecables.com Reason: I agree to the terms defined by the placement of my signature on this document Location: New Jersey Date: 2024.01.02 17:43:50 -05'00'