2.4 GHz RF Presentation Kit 2.4 GHz RF Presentation Kit Buttons Battery cap USB receiver laser aperture laser aperture Buttons Battery cap USB receiver User Instructions User Instructions 1. Unscrew the middle part (battery cap) from the laser pointer and insert one AAA battery with positive terminal as shown above. Screw battery cap firmly 2. Unplug the USB receiver from the laser pointer and connect it to a USB port of PC or laptop 3. Press the "page up" or "page down" button to scroll between pages Press and hold round button to turn on laser pointer; release the button to turn off laser pointer 1. Unscrew the middle part (battery cap) from the laser pointer and insert one AAA battery with positive terminal as shown above. Screw battery cap firmly 2. Unplug the USB receiver from the laser pointer and connect it to a USB port of PC or laptop 3. Press the "page up" or "page down" button to scroll between pages Press and hold round button to turn on laser pointer; release the button to turn off laser pointer Laser light Laser light CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous laser light exposure WARNING Laser radiation is harmful to the eye. Avoid direct eye exposure. Do not look directly into the aperture while laser pointer is turned on Keep out of reach of children FCC ID: 2AJGYRF-0301 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous laser light exposure WARNING Laser radiation is harmful to the eye. Avoid direct eye exposure. Do not look directly into the aperture while laser pointer is turned on Keep out of reach of children FCC ID: 2AJGYRF-0301 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. MADE IN TAIWAN MADE IN TAIWAN