FCC ID: 2AT6J6602 Cartoon Remote Control Car

Users manual Users manual Users manual Frequency Battery parameters 49mhz Remote control:2 x 1.5 V AA Car:3*1.5V AA 6602 Type FCC ID:

Manufacturer JIA MING TOYS FACTORY Address 2AT6J6602 CHENGHAI DISTRICT,SHANTOU CITY, GUANGDONG PROVINCE,CHINA The packaging has to be kept since it contains important information. Quadrotor 1. Remove the battery compartment cover. 2. Place three grain of 1.5V AA battery in the correct position when using . 3. Replace battery compartment cover . Remote Control 1. Remove the screw. 2. Remove the battery compartment cover. 3. Place two grain of 1.5V AA battery in the correct position when using . 4. Replace battery compartment cover and screw. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

JIA MING TOYS FACTORY Agent Authorization Company: JIA MING TOYS FACTORY Address: CHENGHAI DISTRICT,SHANTOU CITY,GUANGDONG PROVINCE,CHINA Product Name: Cartoon Remote Control Car Model Number(s): 6602, WJ12024, 6601, 6603, 6605, 6606, 6607, 6608, 6609, 6610, 6611, 6612, 6613, 6615, 6616, 6617, 6618, 6619, 6620, 6802, 6701, 6702, 6703, 6705, 6706, 6707, 6653, 6655, 6656, 6657, 6658, 6659, 6715, 6716, 6660, 6661, 6662, 6663, 6621, 6622, 6623, 6625, 6626, 6627, 6628, 6629, 6630, 6632, 6633, 6635, 6636, 6637, 6638, 6639, 6650, 66516, 652, 6665, 6666, 6667, 6668, 6669, 6670, 6671, 6672, 6673, 6675, 6676, 6677, 6678, 6679, 6680, 6681, 6682, 6683, 6685, 6686, 6687, 6688, 6689 Product Description: Cartoon Remote Control Car We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-06-09 Signature:

Name:

CHEN JIE MING Company: JIA MING TOYS FACTORY

JIA MING TOYS FACTORY Jun.09 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AT6J6602 Model Number: 6602, WJ12024, 6601, 6603, 6605, 6606, 6607, 6608, 6609, 6610, 6611, 6612, 6613, 6615, 6616, 6617, 6618, 6619, 6620, 6802, 6701, 6702, 6703, 6705, 6706, 6707, 6653, 6655, 6656, 6657, 6658, 6659, 6715, 6716, 6660, 6661, 6662, 6663, 6621, 6622, 6623, 6625, 6626, 6627, 6628, 6629, 6630, 6632, 6633, 6635, 6636, 6637, 6638, 6639, 6650, 66516, 652, 6665, 6666, 6667, 6668, 6669, 6670, 6671, 6672, 6673, 6675, 6676, 6677, 6678, 6679, 6680, 6681, 6682, 6683, 6685, 6686, 6687, 6688, 6689 To Whom It May Concern:

We, The JIA MING TOYS FACTORY hereby declare that the models are identical except the model name and different appearance color. Except for the different above, no other modification is performed. Sincerely, Signature:

JIA MING TOYS FACTORY Contact person: CHEN JIE MING

JIA MING TOYS FACTORY Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-05-27 Subject; Request for Confidentiality FCC ID: 2AT6J6602 To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful-to our company and would give competitors an unfair advantage in the market. a

| Schematic Diagram LS Block Diagram

(| Parts List x) Operational Description __| Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

_. External Photos __ Test Setup Photos __| Internal Photos __| User Manual __| For 45 days, pursuant to Public Notice DA 04-1705. OR

| For 180 days pursuant to KDB 726920 DO1. lt is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely CHEN JLE MING JIA MING TOYS FACTORY Contact person: CHEN JIE MING