FCC ID: 2AXS5-FLC8720FRAB01 FLC8720FRA-B-01

JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Product Specification ModelFLC8720FRA-B-01 Jiangsu Fulian Communication Technology Co., Ltd. Approved By Reviewed By Prepared By Version Date V1.4 2026.03.05 1 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Version History Date Version Updates 2024-12-20 2025-03-05 2025-04-30 2026-02-06 2026-03-05 V1.0 V1.1 V1.2 V1.3 V1.4 Initial Release Add timing diagrams, reference designs, and power consumption data Update module size Update packaging information Add description for series model FLC8720FRA-B-01 2 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Product Overview The FLC8720FRA-B module integrates the RTL8720DF dual-core Cortex-M33 & M23 processor platform (up to 200MHz), supporting IEEE 802.11a/b/g/n Wi-Fi and Bluetooth Low Energy (BLE 5.0) across 2.4 GHz and 5 GHz bands. With built-in 512KB RAM and 4MB Flash, it delivers high-speed data processing capabilities. Featuring an LGA package (13.212.52.0mm) and superior RF performance, it is widely used in IoT applications:

Consumer IP cameras Dashcams Entry-level smart TVs Robotic vacuums Drones Key Features Dual-band support: 2.4GHz (802.11b/g/n) & 5GHz (802.11a/n) Compact dimensions: 13.20.2 x(12.50.2) x(2.00.15)mm LGA package design Power input: 3.0V3.6V (Typ. 3.3V) Operating temperature: -40C to +85C 40MHz external crystal oscillator 3 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Technical Specifications Parameter Description Model Number FLC8720FRA-BFLC8720FRA-B-01 Module Type Wi-Fi 1T1R and BT/BLE Combo Module Main Chip Stands Data Rates Modulation Schemes Frequency Bands Security RTL8720DF 802.11 a/b/g/nBLE 5.0 802.11b1 Mbps2 Mbps5.5 Mbps11 Mbps 802.11a/g6 Mbps9 Mbps12 Mbps18 Mbps24 Mbps36 Mbps48 Mbps54 Mbps 802.11nHT20/HT40MCS 0~MCS 7 DBPSKDQPSKCCKBPSKQPSK16QAM64QAM GFSK 2.4 GHz2.400~2.4835 GHz 5 GHz5.150~5.850 GHz WPA-PSKWPA2-PSKWPA3-SAEAES-128DESSHA TrustZoneSecure Boot Interface SDIO\UART\USB\SPI\I2C\PWM Power Supply DC3.3V 3.0V - 3.6V Operation temp

-40~+85C Storage Temp

-20 ~ 95C Dimensions 13.20.2x12.50.2x(2.00.15)mm 4 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Hardware Architecture13.20.2x12.50.2x(2.00.15)mm Figure 2. FLC8720FRA-B Physical Dimensions Figure 3. FLC8720FRA-B-01 Physical Dimensions

*(FLC8720FRA-B-01 module without coaxial connector) Pin Layout 5 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Pin Definition Top View 6 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Table 1 Pin Definitions No. 1,2,1114,36~46,48~61 3 8 Name GND VCC CHIP_EN 31 30 19 20 5 6 12 13 16 17 18 21 22 23 26 27 28 33 34 35 47 4,7,9,10,15,24,25,29,3 2 UART1_TXD UART1_RXD UART2_TXD UART2_RXD GPIO10 GPIO9 GPIO15 GPIO14 GPIO3 GPIO2 GPIO1 GPIO0 GPIO6 GPIO8 GPIO7 GPIO5 GPIO4 GPIO16 GPIO17 GPIO11 ANT_WIFI/BT RESERVED Function GND Power:Vmax=3.6V Vmin=3.0V Highon, enable chip Low: off, chip power off UART1 TXD UART1 RXD UART2 TXD Notes UART UART2 RXD GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO GPIO WiFi/BLE Ant NC 50 suspended 10 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Pin Pin Number 19 Name UART2_TXD GPIO PA7 20 21 18 17 16 28 27 22 26 23 6 5 35 30 31 13 12 33 34 UART2_RXD PA8 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 UART1_RXD UART1_TXD GPIO14 GPIO15 GPIO16 GPIO17 PA12 PA13 PA14 PA15 PA25 PA26 PA27 PA28 PA30 PB1 PB2 PB3 PB18 PB19 PB20 PB21 PB22 PB23 GPIO Functions Function 1 Function 2 Function 3 Function 4

SPI_MOSI SPI_MISO SPI_CLK SPI_CS USB_DM USB_DP

RREF

ADC4 ADC5 ADC6

SWDIO1

SWCLK1 SDIO_DATA2 SWCLK2 SDIO_DATA3 SWDIO2 SDIO_CMD SDIO_CLK SDIO_DATA0 SDIO_DATA1 PWM0 PWM1 PWM2 PWM3

I2C1_SCL I2C1_SDA

I2C_SCL I2C_SDA

11 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Laser marking instructions 12 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B QR Code Content: SN-MAC, 15-digit SN + 12-digit MAC Address TYYMMDD00000001 T PRF PINor E(Ipex) YY:Yeare.g.,26 for 2026 MM:Month,e.g., 10 for October DD: Day,e.g.,08 for the 8th day 00000001:Cumulative serial number:0~99999999

:Module Model: FLC8720FRA-B,FLC8720FRA-B-01

:12-digit MAC Address of the module

:CMIIT ID:25J32F1KF720(M)

:Company Name:Jiangsu Fulian Communication Technology Co., Ltd. 13 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Timing diagram Symbol TPRDY TCORE TBOOT VPD_LOW VRST TRST Parameter VDDx ready time HS core power ready time HS MCU boot time Power-down low voltage Shutdown occurs after CHIP_EN lower than this voltage Required time that CHIP_EN lower than VRST Min. 0.1 200 0 0 1 Typ. 0.6 15 200 0 0 1 Max. 4.6

0.3 0.2 * VDDx

Unit ms ms ms V V ms APower on or deep sleep wake-up timing BPower off timing 14 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B CPower down timing Power consumption data 15 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Reflow Profile Figure 3.FLC8720FRA-B Reflow Temperature Packaging method 13.1 Carrier tape dimensions 16 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B Notes:

1.The cumulative tolerance of 10 edge holes must not exceed 0.2 mm. 2.Material specification: PS black, thickness 0.40 mm. 3.13-inch reel packaging length: 19.68 m. (Leading empty pocket length: 0.24 m; component packaging length: 19.20 m; trailing empty pocket length: 0.24 m.) 4.Total number of parts packed on a 13-inch reel: 820 pcs. (Leading empty pockets: 10 pcs; actual packed parts: 800 pcs; trailing empty pockets: 10 pcs.) 17 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B 13.2 Packaging method The products are shipped on reels for ease of SMT processing by customers. Each reel includes a humidity indicator card and desiccant, is vacuum-sealed in an anti-static bag, and then packaged in a carton for shipment. Both the reels and the outer cartons are labeled with manufacturer labels and a QR code for inspection and outbound tracking, facilitating traceability and anti-counterfeiting measures. 18 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B 6 pizza boxes are placed into one carton, and the carton is sealed. Each carton contains 4800 pieces. Figure 4. FLC8720FRA-B Packing 14Ordering Instructions Purchase Code Operating Antenna Temperature Range FLC8720FRA-B FLC8720FRA-B-01

-40~85

-40~85 4th Generation RF Coaxial Connector Pin Antenna 19 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B ESD Protection: Mandatory during handling Figure 5. FLC8720FRA-B storage and ESD protection Support & Contact Jiangsu Fulian Communication Technology Co., Ltd. Address: Fulian Industrial Park, Lanling Road, Danyang Economic Zone, Jiangsu 212310, China Tel: +86-511-80760088 Email: [email protected] Business Hours: MonSat 8:0012:00 & 13:0017:00 (GMT+8) 20 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s). Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15 Subpart C 15.247 FCC Part 15 Subpart C 15.407 2.3 Specific operational use conditions 21 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B The module can be used for mobile applications with a maximum antenna gain of 1.98dBi at 2.4 GHz and 3.20 dBi at 5 GHz.The host manufacturer installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation. The host manufacturer has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in this manual. 2.4 Limited module procedures The device is a Single module and complies with the requirement of FCC Part 15.212. 2.5 Trace antenna designs Not applicable. The module has its own antenna, and doesn't need a host printed board micro strip trace antenna, etc. 2.6 RF exposure considerations The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction, and if RF exposure statement or module layout is changed, then the host product manufacturer is required to take responsibility of the module through a change in FCC ID or new application. The FCC ID of the module cannot be used on the final product. In these circumstances, the host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. 2.7 Antennas Antenna Specification are as follows. Type of antenna: FPC Antenna. Gain of antenna: 2.4GHz @ 1.98 dBi Max. 5GHz @ 3.20 dBi Max.This device is intended only for host manufacturers under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the internal antenna(s) that has been originally tested and certified with this module. The antenna must be either permanently attached or employ a "unique" antenna coupler. As long as the conditions above are met, further transmitter test will not be required. However, the host manufacturer is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). 22 JiangsuFulianCommunication Technology Co.,Ltd FLC8720FRA-B 2.8 Label and compliance information Host product manufacturers need to provide a physical or e-label stating "Contains FCC ID: 2AXS5-

FLC8720FRAB01" with their finished product. 2.9 Information on test modes and additional testing requirements Host manufacturer must perform test of radiated & conducted emission and spurious emission, etc. according to the actual test modes for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. Only when all the test results of test modes comply with FCC requirements, then the end product can be sold legally. 2.10 Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for FCC Part 15 Subpart C 15.247 ,FCC Part 15 Subpart C 15.407 and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuit), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. 23

im 1 IT ATT gl MODEL : FLC8720FRA-B-O1 CMIIT 1D:25J32P1KF720 0) MAC :1C70C9B95C28 CAR ROLE RCT RA

Jiangsu Fulian Communication Technology Co.,Ltd Date2026/8/26 Product Model Number: FLC8720FRA-B-01 FCC ID2AXS5-FLC8720FRAB01 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Wei jiang Luo Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-18923734191 On behalf of: Jiangsu Fulian Communication Technology Co.,Ltd

Jiangsu Fulian Communication Technology Co.,Ltd Address: Yongan Community, the south of Lanling Road, Danyang Development District, Jiangsu Province, China Date: 2026-09-08 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC 1D: 2AXS5-FLC8720FRABO1 FRN: 0030077929

(Jiangsu Fulian Communication Technology Co.,Ltd) certifies that, as of the date of the filing of the application, MIRAMONT SOLUTIONS LLC is our designated U.S. agent for service of process for the above referenced FCC ID. (Jiangsu Fulian Communication Technology Co.,Ltd) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. MIRAMONT SOLUTIONS LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC. ID. Designated U.S. Agent Information:

Name: MIRAMONT SOLUTIONS LLC Address: 19 GEORGETOWN, IRVINE, CA 92612 United States FRN: 0036313369 Contact Person: Wenyi Wang Tel.: 951 401 3633 Email: [email protected] Sincerely, Signed on behalf of Jiangsu Fulian Signed on behalf of MIRAMONT SOLUTIONS Communication Technology Co.,Ltd LLC 2 ff Name: Wei jiang Luo Name: Werli Wang Title: Manager Title: CEO

Jiangsu Fulian Communication Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 20, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AXS5-FLC8720FRAB01 Jiangsu Fulian Communication Technology Co.,Ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Jiangsu Fulian Communication Technology Co.,Ltd certifies that the equipment for which authorization is sought does not include cybersecurity or anti-

virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely,

(Applicant signature)

(Applicant printed name) :WeiJiang Luo Rev 1/26/2023 Jiangsu Fulian Communication Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 20, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AXS5-FLC8720FRAB01 Jiangsu Fulian Communication Technology Co.,Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Applicant printed name) :weiJiang Luo Rev 1/26/2023

Jiangsu Fulian Communication Technology Co.,Ltd Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 17, 2026 Subject; Modular Transmitter Application Company name: Jiangsu Fulian Communication Technology Co.,Ltd FCC ID: 2AXS5-FLC8720FRAB01 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;-

FCC KDB 996369 D01 Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide v02. FCC ID:2AXS5-FLC8720FRAB01 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee

(do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry The module is equipped with itsown shielding shielded. Physical components and tuning capacitor(s) may be case. located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure The module has buffer modulation/data inputs. that the device will comply with Part 15 requirements with any type of input signal. The module must contain power supply regulation on the module. The module has its own power supply regulation. The module must contain a permanently attached antenna, or This module must include a permanently contain a unique antenna connector, and be marketed and operated fixed antenna or a dedicated antenna only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), connector, and may only be sold and 15.212(a), 2.929(b). The module must demonstrate compliance in a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). operated with a specific antenna. The module was tested onevaluation board, and it's notinside of another device duringtesting The module transmitter will belabeled with its own FCC ID, andfor OEM integration theintegration manual containslabeling instructions for the hostdevice The module must comply with all specific rules applicable to the The module transmitter complies with all transmitter, including all the conditions provided in the integration applicable rules and the integration manual instructions by the grantee. The module must comply with RF exposure requirements contains requirements for the host device. The modular transmitter complieswith RF exposure requirement. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers

(e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements;

KDB Ref Sect 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Requirements of KDB 996369 D03 User Manual Page Number reference List of applicable FCC rules Page 18-20 Summarize the specific operational use conditions Page 18-20 Limited module procedures Trace antenna designs RF exposure considerations Antennas Label and compliance information Page 18-20 Page 18-20 Page 18-20 Page 18-20 Page 18-20 Information on test modes and additional testing Page 18-20 requirements 2.10 Additional testing, Part 15 Subpart B disclaimer Page 18-20 Name:Weijiang Luo Date: September 17, 2026 Title:RD manager Signature of applicant

Jiangsu Fulian Communication Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AXS5-FLC8720FRAB01 To Whom It May Concern, Date: September 8, 2026 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Wei jiang Luo Title: Manager

Jiangsu Fulian Communication Technology Co.,Ltd FCC Software Configuration Control Declaration Date: September 14, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: FLC8720FRA-B-01/FLC8720FRA-B-01 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Wei jiang Luo Date: September 14, 2026 Title:Manager Signature of applicant