all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.13 MiB | November 10 2017 | |||
1 | Cover Letter(s) | November 10 2017 | ||||||
1 | Attestation Statements | November 10 2017 | ||||||
1 | Cover Letter(s) | November 10 2017 | ||||||
1 | External Photos | November 10 2017 | ||||||
1 | Cover Letter(s) | November 10 2017 | ||||||
1 | Internal Photos | November 10 2017 | ||||||
1 | Cover Letter(s) | November 10 2017 | ||||||
1 | ID Label/Location Info | November 10 2017 | ||||||
1 | ID Label/Location Info | November 10 2017 | ||||||
1 | RF Exposure Info | November 10 2017 | ||||||
1 | Test Report | November 10 2017 | ||||||
1 | Test Setup Photos | November 10 2017 |
1 | User Manual | Users Manual | 1.13 MiB | November 10 2017 |
DP5 581 Ser Ope ies rators sManu ual Printek, LL 15 517 Townline Bent ton Harbor, M 269-925-32 w www.printek LC e Road MI 49022 200
.com Printek k, LLC. A pany. Rev A arlier Comp Number xxxx R ware Vxx and ea Part Firmw FCC Part 15 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and the receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Normal use distance please maintain 5cm This equipment complies with Canadian and FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Part 15.21 Caution: Changes or modifications not expressly approved by Printek, LLC could void the users authority to operate the equipment. Canadian Department of Communications Radio Interference Statement ThisdevicecomplieswithIndustryCanadalicenseexemptRSSstandard(s).Operationissubjecttothefollowingtwo conditions:1)thisdevicemaynotcauseinterference;2)thisdevicemustacceptanyinterference,including interferencethatmaycauseundesiredoperationofthedevice.UnderIndustryCanadaregulations,thisradio transmittermayonlyoperateusinganantennaofatypeandmaximum(orlesser)gainapprovedforthetransmitter byIndustryCanada.Toreducepotentialradiointerferencetootherusers,theantennatypeanditsgainshouldbe sochosenthattheequivalentisotropicallyradiatedpower(e.i.r.p.)isnotmorethanthatnecessaryforsuccessful communication.MaximumpoweroutputplusmaximumantennagainoftheEUTis:4.5W/m2,Limitis10Wm2. LeprsentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence. L'exploitationestautoriseauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2) l'utilisateurdel'appareildoitacceptertoutbrouillageradiolectriquesubi,mmesilebrouillageestsusceptibled'en compromettrelefonctionnement.Conformmentlarglementationd'IndustrieCanada,leprsentmetteurradio peutfonctionneravecuneantenned'untypeetd'ungainmaximal(ouinfrieur)approuvpourl'metteurpar IndustrieCanada. Danslebutderduirelesrisquesdebrouillageradiolectriquel'intentiondesautresutilisateurs,ilfautchoisirle typed'antenneetsongaindesortequelapuissanceisotroperayonnequivalente(p.i.r.e.)nedpassepas l'intensitncessairel'tablissementd'unecommunicationsatisfaisante.Lapuissancedesortiemaximaleplusgain d'antennemaximalduEUTest:4.5W/m2Limiteest10W/m2 i www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Battery D Disposal e of used batte the Rechargea romote recycli gments:
registered trad L and ZPLare Only dispose regulations, t created to pr Acknowledg Printek is a r Zebra, CPCL Wi-Fi is a re Windows is All other trad 2017 By P eries accordin able Battery R ing of recharg g to your loca Recycling Corp geable batterie al regulations. poration (RBR es. For more i If you do no RC) is a non-p nformation vi t know your l profit organiza isit www.rbrc ocal ation
.org. demark of Prin registered tra ntek, LLC ademarks of Z ebra Technolo ogies egistered trade a registered tr demarks are th Printek LLC, 1 emark of the W rademark of M he property of 1517 Townlin Wi-Fi Alliance e poration Microsoft Corp f their respect ive owners. ne Road, Bento on Harbor, M I 49022. All rights reserve ed. Read ventilated. Do d all set up and o not operate ne operating instru ear a heat sourc uctions before p ce. proceeding with operation. Do not operate in a an enclosure un nless properly Lesen geschlossenen Betrieb n Sie vor der Inb n Raum, es sei betriebnahme d denn dieser wir die Aufbau- und rd ordnungsgem Bedienungsanl m belftet. Ne leitung Betreibe ehmen Sie den en Sie den Druc Drucker nicht in cker nicht in ein n der Nhe eine em kleinen, r Wrmequelle in No us parts is require product unsafe is disconnecte to an unground operate near li ser-serviceable ed to warrant pr e to operate. Th ed from AC pow ded receptacle iquid or spill liqu parts inside. R roper, safe oper he print head an er before remo can result in ele uid into the print Refer service or ration. Any alte nd motors get ho oving any cover ectrical shock. ter at any time. repairs to a qua eration or modif ot during use. W rs or performing Never place the alified service pr ication of this de Wait until they c g any required c e printer near inf rofessional. Us evice voids the cool before touch leaning or main flammable or ex se of genuine Pr user warranty a hing them. Mak ntenance. Conn xplosive substa rintek replaceme and may make t ke certain the pr necting this print nces. Do not ent the inter ter Enth qualifiziertes K Betrieb zu gew des Produkts g bevor Sie sie b abnehmen ode Elektroschock Drucker nicht i lt keine Teile, d Kundendienstpe whrleisten. n gefhrden. Wh berhren. Verge er das Gert rei fhren. Setzen in der Nhe von die vom Bedien ersonal. Die Ver nderungen oder hrend des Druck ewissern Sie sic inigen bzw. war Sie den Drucke n Flssigkeiten er instandgeset wendung von e r Modifikationen kens werden Dr ch, dass der Dru rten. Schlieen er niemals in die und lassen Sie tzt werden knn echten Printek E n dieses Gerts ruckerkopf und ucker nicht meh Sie diesen Druc e Nhe von feue keine Flssigke nen. Bitte wende Ersatzteilen ist n machen die Ga Motoren hei. W hr an die Stromq cker nicht an ein er- oder explosi eiten in den Dru en Sie sich bei I notwendig, um o arantie ungltig Warten Sie, bis quelle angeschlo ne ungeerdete S ionsgefhrlichen cker gelangen. r an Instandsetzung ordnungsgem und knnen den sich die Teile a ossen ist, bevor Steckdose an; d n Stoffen. Betre oder Reparatur en, sicheren n sicheren Betri ieb n, bgekhlt haben gen r Sie Abdeckung dies kann zum eiben Sie den Specificat tions are s ubject to c change with hout notice e. ii www.printe k.com|P:
888.211.340 00|F:269. 222.1229|
E:info@pr rintek.com TABLE OF CONTENTS Introduction ......................................................................................................................................................... 2 Printer Features .................................................................................................................................................. 3 Quick Start Instructions ..................................................................................................................................... 4 A. Paper Load ............................................................................................................................................... 4 B. Battery Installation .................................................................................................................................... 5 C. Charge Battery .......................................................................................................................................... 5 D. Power On .................................................................................................................................................. 5 E. Control Panel ............................................................................................................................................ 6 F. Performing a Printer Self-Test .................................................................................................................. 6 Configuration ...................................................................................................................................................... 7 A. Connectivity Parameters ........................................................................................................................... 8 B. Image Parameters .................................................................................................................................. 12 C. Device Config ......................................................................................................................................... 13 D. Fonts ....................................................................................................................................................... 15 E. Graphics ................................................................................................................................................. 16 F. Update Printer Firmware, Upload Files to Printer Memory ..................................................................... 17 G. Reset Printer Configuration to Factory Defaults (Safe Mode) ................................................................ 17 Printing Modes .................................................................................................................................................. 18 A. ASCII Based Print Jobs .......................................................................................................................... 18 B. Graphic Based Print Jobs ....................................................................................................................... 18 Integrating the Printer into your Business Applications .............................................................................. 19 A. Windows Desktop Computers ................................................................................................................ 19 Print Drivers .................................................................................................................................................... 19 I. USB ................................................................................................................................................... 19 IV. Wi-Fi .................................................................................................................................................. 20 B. Windows Tablets and Smartphones ....................................................................................................... 20 C. Android Tablets & Smart phones ............................................................................................................ 20 II. Wi- Fi ................................................................................................................................................. 21 D. Apple Tablets & Smartphones ............................................................................................................ 21 II. Wi-Fi .................................................................................................................................................. 21 Media ................................................................................................................................................................. 22 A. Standard Media ...................................................................................................................................... 22 B. Black Mark Media Position ..................................................................................................................... 22 Maintenance and Troubleshooting ................................................................................................................. 23 A. Cleaning .................................................................................................................................................. 23 B. Battery Care ............................................................................................................................................ 23 I. Getting the Maximum Battery Life ..................................................................................................... 23 II. Charging the Battery .......................................................................................................................... 23 III. Additional Battery and Safety Information ......................................................................................... 24 IV. Testing the Power Adapter and Battery ............................................................................................. 24 C. Troubleshooting ...................................................................................................................................... 25 General Error Conditions ................................................................................................................... 25 Fault Description and Resolution ....................................................................................................... 25 D. Obtaining Service ................................................................................................................................... 26 APPENDIX ......................................................................................................................................................... 27 A. Appendix A FieldPro 581 Printer Specifications .................................................................................. 27 B. Appendix B Supplies and Accessories ................................................................................................ 28 C. Appendix C Media ............................................................................................................................... 29 D. Appendix D Mounting Options ............................................................................................................. 29 _Toc464736772 Glossary of Terms ............................................................................................................................................ 30 Index .................................................................................................................................................................. 32 I. II. 1 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Introduction Thank you for purchasing the Printek FieldPro 581 Series mobile thermal printer also referred to in this manual as the DP-581. The DP-581 series prints on special thermal media supplied in roll form up to 8 inches wide. All models are equipped with a USB port which supports cabled communications. All models support an optional internal Wi-Fi interface. Complete specifications may be found in Appendix A FieldPro 581 Printer Specifications. The remainder of this manual focuses on preparing the printer for initial use and performing tasks that will be encountered during daily use. Maintenance describes how to maintain the printer for optimal performance and has information on how to diagnose any problems that may occur. Printek recommends using genuine Printek supplied media and accessories. For detailed lists and contact information, please see Appendix B Supplies and Accessories&Appendix C Media. 2 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Printer Features PaperDoor Paperdoorreleasebutton ControlPanel PowerPort USBDataPort Your FieldPro 581 features:
IP54 rated for water and dust resistance... plus rated for repeated 6-foot drops to concrete Easy-to-read control face and simple drop-in paper loading Quickly prints a wide variety of tickets, and receipts. Print speeds up to 5 ips Extensive fonts, character sets, bar codes and graphic capabilities Printer configuration is quick and easy with a web based interface The latest in battery technology provides for full-shift printing in all modes Compatible with Windows, Windows Mobile, Apple iOS, and Android Emulations that allow the printer to be a drop-in replacement for nearly any mobile printer For detailed specifications reference Appendix A FieldPro 581 Printer Specifications. 3 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Tearpaper towardsbackof printer Quick Start Instructions A. Paper Load ( Media 8.5) Media 8 Before loading 8 inch media, users could install a pair of spacers into the compartment so as to secure the media. 4 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com B. Printer Installation You could put the printer on desktop, carry with your hand or carry it with the should strap (option) 1) Desktop Installation Theprintermustbeinstalledhorizontally.Placetheprinteronasolid,flat,stablesurface;ensurethe printerisplacedinastablepositionandthereiseasyaccessforuserstothecontrolpanelandroll paperholder.Alsoensurethereisenoughspaceforsufficientventilationandfortheprintout. 2) Hans Strap Installation The hand strap provides the user with a convenient and secure method of carrying the printer. To attach the hand strap to the printer:
Insert the end of the strap through the cut out on the front of the printer. Loop the end of the strap back around the cut out and secure it over. Repeat this process for the opposite end of the strap. 3) Shoulder Strap Installation If your printer is equipped with the shoulder strap option. Insert each end of the shoulder strap into the cut-outs in each top corner of the printer and secure the looped end over the button on the end of the strap to fasten. Hold the buckle and pull the strap as shown below until you achieve the desired length. 5 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Removethetwoscrewandremovethe battery. Pressbuttontoseebatterychargelevel. 4LED100%charge 3LED75%
2LED50%
C. Battery Installation Disposal Pleasedisposethebatteriesseparatelyandfreeofcostatyoursalesagencyorthedesignatedlocalcollecting points. Thereforepleaseconsiderthenationalrecyclingstandards!
DisassemblyandremovalofthebatteriesaredescribedintheUserGuide. D. Charge Battery Uncover the printer ports and plug in your AC power adapter to the Power port (must be a Dascom-
supplied accessory). The yellow LED will show solid ON while the printer battery is charging. NOTE: Charge via USB is not supported, please do not charge via the USB-C port. E. Power On Depress the Power button on the control panel. The green LED and the red LED will both be lit while the printer is going through its startup sequence (about 20 seconds). The red LED will go off, leaving the green LED on to indicate the printer is ready to print. When battery volume goes below 5%, the printer will shut down itself. When its below 10%, it will flash yello LED as an alarm of low battery. 6 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com F. Control Panel Control Panel Power Button Paper Feed Button On On On Flashing Flashing Flashing Flashing Power & Status
(Green/Red) Battery
(Yellow) Power Up Power Down Toggle IP over USB on/off Advance paper Print Setup Report Press & Release Press & Hold Press twice Press once Press twice Off Off Off Off Off Off Solid Flashing Flashing Alert
(Red) On Off Off Off Flashing Flashing Flashing Off Off Off Off Flashing On G. Performing a Printer Self-Test Indication Booting up Ready Paper Error/Lid Open Job is arriving Job is printing IP over USB active Charging Battery Battery Low Restart the printer manually Restore the printer firmware Print head too hot With power on, press the paper feed button twice quickly. H. Restore the Printer Firmware 1. When the Power & Status LED is off, and Alert LED flashing, you need to restore the printer firmware. Turn on the printer and wait for around 30 seconds, the printer enters into configuration mode, and you could download the firmware via web. 2. If any problem occurs during firmware upgrade, and the printer fails to work, you could restore the printer firmware as such:
You had better use external battery. Turn on the printer by holding both the feeding button and power button for five seconds. With Power LED and Alert LED flashing, the printer enters into Configuration mode after 30 seconds. You could upgrade the firmware via the web. 7 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Configuration Configuration of the DP-581 printer is done through a built-in web page. This allows you to configure the printer from any device that has a browser and is compatible with your DP-581 communication capabilities. 1. Turn the printer ON. 2. Connect a USB cable between the printer and a PC. 3. To access the DP-581 web page, push the Power button twice rapidly. This will put the printer into Configuration mode. 4. When the printer is in Configuration mode the POWER and FAULT LEDs will flash together. a. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear:
8 b. Type 0000 and hit Enter- you should now be at the home page for DP-581 Configuration. www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com 5. The main configuration screen of the DP-581:
This is an overview of the printer configuration. The battery icon shows the relative charge in the battery. The more bars, the higher the charge. An AC plug will appear in the battery icon when the printer is plugged into an external power source. To return the printer to normal operating mode, double-click the Power button. The POWER LED will be returned to a solid light. At the top of the Main Page are selections to access the sub-menus. Wherever the book icon appears in the printer configuration pages, click it to access the user manual pages for help. A. Connectivity Parameters This page allows you to setup the connection to your printer. Depending on the optional interface installed, you will see either WI-FI Config. In the detailed descriptions, an asterisk (*) indicates the factory default value. WI-FI Config:
9 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com 10 Wireless Configuration This will display the current Wi-Fi configuration:
IP Address user defined. If Static Address Method is selected, type in the address the printer will use on the network. SubNetMask user defined. If Static Address Method is selected, type in the subnet mark of the network. GateWay user defined. If Static Address Method is selected, type in the gateway address of the network. WiFi Port user defined. Type in the IP port to be used by the printer. (default value = 8023) DHCP printer will acquire an IP address from your network DHCP server Static printer will always connect to the network using the IP address defined. Address Method user selectable Personal Area Network The printer will broadcast itself as a network connection. The Power LED will flash off every two seconds while in this mode. The SSID will be the serial number of the printer. When connecting to the printer, the passphrase is the printers serial number. Personal Area Network mode can also be activated outside of the printer web page. To enter Personal Area Network mode, press and hold the Power and Paper Feed buttons until the Power and Alert LEDs light. Release both buttons, and the printer will restart in Personal Area Network mode. To exit Personal Area Network mode, press and hold the Power and Paper Feed buttons until the Power and Alert LEDs light. Release both buttons, and the printer will restart in normal Wi-Fi mode. www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Available Networks access points detected by the printer will be displayed. Select Add/Connect to use one of these access points. Previously Connected Networks access points detected by the printer or added through Add/Edit Network will be displayed. Select Connect to use one of these access points, or Remove to delete it from printer. Currently Configured Networks access points added through Add/Edit. They may not have been connected yet. Select Remove to delete access point from printer. Set Date Some Enterprise network connections require this setting. Simply enter the current year. Add/Edit Network Enter the SSID of a network connection. If authentication is used select the authentication type. Click Next. The following form will change depending on the authentication type:
WPA-PSK Enter the password for the network connection. WPA-EAP or IEEE8021X 11 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com These are Enterprise network settings. Consult your server manual for recommended settings. Upload Digital Certificate If your enterprise network uses digital certificates as another form of authentication, you can upload the certificates here. B. Image Parameters This page allows you to make selections about the image to be printed. Current Emulation:
Possible Values: PRINTEK*, ZPL, CPCL, ESCPOS, IPL, AUTOIMAGE, PDF, POSTSCRIPT, IMAGE 12 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com The DP-581 printer is capable of using several different emulation modes. This feature sets the family of printer commands that may be used by a host application program to control the various capabilities of the printer. The printer will only respond to commands valid for the currently selected emulation. For more information, please refer to the Integrators Guide. Besides the popular printer languages to choose from, the following selections allow the DP-581 to print many other file formats directly, without the need for a driver. AUTOIMAGE selected when mixed PDF and POSTSCRIPT images are sent to the printer. The printer will determine which type of file has been sent. This can increase printer response time. PDF When in this mode the printer will directly print Portable Document Files (PDF). POSTSCRIPT When in this mode the printer will directly print Postscript formatted files (.ps). You can also use a generic Postscript driver to print when in this mode. IMAGE selected if just image files are being sent to the printer. When in this mode the printer will directly print the following file types: .png, .jpg, .bmp, .pbm, .svg, .tiff Default Font:
The DP-581 has the ability to use True Type Fonts. All True Type Fonts loaded into printer memory are listed here. When using emulations that do not specify the font for each line of text, select the font you would like to use as the default font. All print jobs will use the default font unless a command is sent to the printer to use another font. Chars Per Inch and Default Text Line Spacing:
NOTE: These settings only function in Printek Emulation This determines how large the characters are and how many characters will print in a one inch space. The higher the number, the greater the number of lines per vertical inch of print. C. Device Config This page allows you to set certain hardware parameters on the printer. 13 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Login Password This allows the printer webpage password to be changed. Units Select between inches or millimeters. If you change units, do so before entering other settings. Max Paper Speed Possible values: 1.0 to 5.0 ips, Default = 5.0 When using labels or heavy paper stock, you may need to decrease the paper speed to prevent paper jams. Mark Seeking Possible values: Off*, Front, Rear, Gap. (Note: Rear and Gap are available only on 581L models). Set the value when using regular or label media with black alignment marks or label media with gaps between the labels Sensor Brightness Possible values 0-100%. This displays the reflectivity or light transmission of the media, depending on the setting for Mark Seeking. This value is updated once per second. Note: Before adjusting black mark thresholds, set Mark Width to match the width of the black mark or label gap on your media. Front Paper Sensor Threshold 14 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com When using paper with a black on the front adjust this setting to insure the paper stops at the black mark. 1. With the lid closed and the black mark not over the front paper sensor, note the Sensor Brightness. 2. Open the paper lid and hold the paper against the front paper sensor so that the black mark is over the sensor. Note the Sensor Brightness. 3. Set Threshold = black mark brightness + ((paper brightness black mark brightness) / 2) and click Submit Changes. Example: black mark brightness = 10%, paper brightness = 80%. Threshold = 10% + ((80% - 10%) / 2) = 45%. 4. Close lid and press paper feed. The paper should stop with the bottom of the form at the tearbar. Rear Paper Sensor Threshold This is set the same as the front paper threshold, but using the rear (in lid) paper sensor and the Rear Sensor Brightness. Gap Paper Sensor Threshold When using labels without a Black Mark, adjust this setting to insure the label stops at the gap in between labels. 1. Remove 2 labels from the backing paper, and close the lid so the backing is over the paper sensor. Note Sensor Brightness for Gap. Changes. 2. Open the lid and close it so a label is over the paper sensor. Note Sensor Brightness for Gap. 3. Set Gap Threshold = label brightness + ((backing brightness label brightness) / 2) and click Submit 4. Close lid and press paper feed. The paper should stop with the bottom of the form at the tearbar. Backup Distance Before Printing Used with Mark Seek. User defined. This is the distance the printer will pull in the paper before starting to print. Max Mark Search Distance Used with Mark Seek. User defined. This is the distance the printer will advance paper to seek the mark before displaying a Paper Out condition. Stop Distance after Mark Use with Mark Seeking. User defined. This is the distance the printer will advance the paper after the mark is detected. Left Margin Setting this value will tell the printer how far from the left edge of the paper to start the print job. Contrast Possible values 0 10. Default value is 5 The lower the value the lighter the print. The higher the value the darker the print. Paper Energy Values This is a locked value. These settings are supplied by the paper manufacturer. The default settings cover most grades of paper. If you are using non-standard paper consult the paper manufacturer for recommended settings. Auto Off Timer Possible values 0 1440 minutes. Default value is 60. This timer will turn the printer off if it has not been used for the time set. Disable this feature by setting the time at 0. The printer will give a 1 minute warning before shutting off. D. Fonts 15 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Upload Font File Truetype Fonts (.ttf, .otf, .ttc and .bdf) can be uploaded here. Languages like ZPL and CPCL can use the fonts by referring to them by their Font Family Name. Printek emulation uses the Index value when selecting a font. Font Aliases Languages like ZPL and CPCL can use an uploaded Font Alias Table so legacy jobs can have their font names mapped to other uploaded fonts. Contact Printek Technical Support at (800) 368-4636 for more information. E. Graphics This menu will allow you to load a graphics file into printer memory for use in creating your output. For instance, logos can be stored for recall and use by your host program (see Integrators Guide for more details). 16 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Upload File Select the graphics file to load into printer memory. Acceptable graphics formats are .jpeg, .pbm, .pcx, .bmp, .png and .svg. Set Width Select the width you want to use to display your logo: full width, half width, or quarter width. Set index Depending on the Index value used, you can automatically print the graphics file as a header (prints at the beginning of the print job), footer (prints at the end of a print job) or use the graphics print command to print anywhere on your receipt or label. See Integrators Guide for more information on graphics commands. When selecting header, the graphics file will automatically print the logo at the beginning of each print job. When selecting footer, the graphics file will automatically print the logo at the end of each print job. You must set each of these values before selecting Upload Logo or the default values will be associated with your image. Current Logo Mapping Once uploaded into the printer memory, your image and settings will be displayed here. F. Update Printer Firmware, Upload Files to Printer Memory 17 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Printer Application Updates, OEM information and Manuals and more can be uploaded here. Contact Printek Technical Support at (800) 368-4636 for more information. G. Reset Printer Configuration to Factory Defaults (Safe Mode) Printer settings can be restored to factory configurations. Note that WIFI network configurations will be lost when Network Config to Factory Defaults is checked. 18 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Printing Modes There are two fundamental printing modes with mobile printers. A. ASCII Based Print Jobs The host sends the print job as a series of lines of characters, some of which represent the text to be printed, while other portions are command codes which tell the printer which font to use, where to locate the text, what barcodes to use, etc. These text-based files are encoded in a print language specific to the target printer. The DP-581 understands ASCII based jobs in several different print languages. Refer to the Appendix or the Integrators Guide for the list of print languages supported. B. Graphic Based Print Jobs The host assembles the printed image as a series of lines of dots, and transmits this image as a sequence of data bytes that represent the dot patterns assembled. Often these jobs or files have some control characters on the front end and / or rear end of the dot pattern bytes to define their format, help control pagination, etc. Windows drivers in particular encode the image as a graphic based print job before it is passed along to the printer. In addition to accepting graphic jobs from its Windows driver, the DP-581 can accept and print directly many other graphic image file types. This opens up the option to print job images from a variety of devices for which drivers or print utilities dont exist, such as some tablets and smartphones. Please see the Integrators Guide or your system integrator for more details. 19 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Integrating the Printer into your Business Applications Step by Step Creating a Link from Host to Printer A. Windows Desktop Computers Print Drivers You may download the appropriate Windows driver from our website. Install the printer driver by the standard method for your version of Windows. I. USB a) Install the printer driver onto your hostbefore connecting the printer. Follow prompts displayed during installation. b) Plug the printer into a USB port on your host system using a mini-USB cable. c) The printer will appear in the Unspecified devices section. Right click on the icon. d) In the popup window, select the Hardware tab. Note the USB port number displayed. e) Using the Add Printer wizard, install the printer using the driver file obtained from Printek and the USB port number noted above. f) After the printer driver installs, the printer will appear as Printek 4-inch printer under the Printers and Faxes heading of your Windows Devices and Printers screen. II. Wi-Fi Note: The following instructions are fundamentally the same for an Infrastructure or Wi-Fi Direct (peer to peer) setup. They also assume that you have already configured your Wi-Fi interface via the DP-
581 printer web page (see the section on Configuration). a) Perform a configuration printout to verify the printer Wi-Fi setup and to record the IP address assigned and the Port number. b) Install the printer as a local printer using the USB instructions above. c) In the Devices and Printers screen, right click the printer icon representing your mobile printer. d) Under Printer Properties, select the Ports tab, then select Add a Port e) In the new dialog box which appears, select Standard TCP/IP ports; this will open the Standard TCP/IP Printer Port wizard. f) Follow the on-screen prompts in this wizard. Youll use the IP address recorded above to set up the port. In the same screen you can also name the port something familiar and relevant, and this will appear as the name of the printer to the user. g) After the port is detected, it will be displayed as a generic network card accept this by clicking Next / Finish. click OK to accept this. h) After you are finished adding the port, Windows will report it as a Standard TCP/IP port;
i) Close the Printer Port window. j) Now in the Printer Properties dialog box your IP address (or the familiar name you assigned above) will appear in the list of ports available. Select it to configure the port. 20 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com k) Windows defaults standard TCP/IP ports to port number 9100. The DP-581 Wi-Fi port number is internally set to 8023. Change the port number to 8023 in the Windows screen and click OK. l) Click Apply in the Printer Properties box. m) Your DP-581 printer driver should now be properly coupled to the Wi-Fi parameters you have chosen. B. Windows Tablets and Smartphones This feature and/or specific directions for use were not available as of this printing. C. Android Tablets & Smart phones I. Wi- Fi This feature and/or specific directions for use were not available as of this printing. D. Apple Tablets & Smartphones I. Wi-Fi This feature and/or specific directions for use were not available as of this printing. www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com 21 Media A. Standard Media Printek offers a variety of media types. See Appendix C for detailed descriptions and ordering information. You may also visit our website or contact your PrintekMobile sales representative for a complete and up to date description of our consumables and accessory products. B. Black Mark Media Position For automatic ticket printing, the Black Mark should be positioned as shown in the figure below. When using Mark Sensing mode (see Configuration, earlier in this document), FieldPro printers will automatically position the output for tear-off and printing following a Form Feed command or by pressing the Paper Feed button. For non-automatic paper positioning, refer to the Integrators Guide for sensing and positioning commands. 22 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Maintenance and Troubleshooting A. Cleaning In normal environments, the printer should be cleaned after printing a few rolls of paper or if there are voids in the printout. For optimum performance and life, you should clean the Print Head and Platen Roller whenever you load new paper. To clean the printer areas as described below, use a Thermal Head Cleaning Pen and MCR Cleaning Card available from Printek, or you may use cotton swabs moistened with isopropyl alcohol. Turn the printer off. Open the Paper Door and remove the paper. Using a Thermal Head Cleaning Pen, clean the white ceramic surface on the Print Head. Caution: Do not use sharp objects to clean the print head. This may damage the printer and require service. Such damage is not covered under warranty. Clean the Black Mark Sensor below the print head. Clean the Tear Bar. Clean the Platen Roller. Turn the Platen Roller with your finger to clean the entire surface. If a Magnetic Card Reader is installed, pass and MCR Cleaning Card through the MCR slot to clean the head. You may also experience a buildup of paper dust in the printer. This may be removed using a can of compressed air or by vacuuming. To clean the exterior of the printer, turn the printer off and use a soft cloth moistened with a mild detergent. B. Battery Care I. Getting the Maximum Battery Life New batteries are shipped in an uncharged state and must be charged for at least 4 hours prior to the first use. Maximum battery capacity is not reached until after completing a minimum of three complete charge and discharge cycles. II. Charging the Battery 23 Plug the power adapter into a power source appropriate for the adapter being used. Plug the power adapter into the power connector on the side of the printer. The printers battery charging circuitry will analyze the condition of the battery and begin charging it if necessary. If the battery is not fully charged, charging will begin and the Battery Indicator will illuminate. When the battery is fully charged, the Battery Indicator will turn off. Charging may take up to 8 hours (4 hours with external desktop charger accessory) depending on the condition of the battery. The printer may be used while the battery is charging, but this will extend the time required to fully charge the battery. www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com III. Addit IV. Test To verify th Tes tha Co Ve fun Note: If t Afte Pe If th not On tim If the printe section for Note: Thi functioning or how lon The will e power ada l not cause apter may r damage to remain conn the printer nected to th or battery. he printer to o keep the b battery fully charged an nd tional Bat ttery and S Safety Info ormation The e FieldPro 5 581 series p printers use e an 11.25 v volt 2950 m AH Lithium Ion battery y. Cautio batteri on: Risk of ies accord explosion ing to the i if battery i instruction is replaced ns. d by incorre ect type. D Dispose of used ent tempera e printer wh 0-104 Fahr above this ra capacity. rt circuit, he The Tak sto bat per Do exp On do Co rec ww nded ambie ery out of th erature is 40 peratures a ose charge emble, shor e recomme ke the batte orage tempe ttery at tem rmanently lo not disasse plode. ly dispose o of used batt your local re not know y RBRC) is a rporation (R cycling of re echargeable ww.rbrc.org. ature for cha hen storing renheit (4-4 ange for lon arging is 68 the printer 40 Centigra ng periods o 8-77 Fahre for long per ade). Do no of time or th nheit (20-25 riods of time ot store a fu he battery m ade). 5 Centigra e. The batt tery ully charged may eat above 80 0C, or inci nerate the b battery. The e battery ma ay teries accor egulations, t non-profit o e batteries. rding to you the Recharg organization For more in ur local regu geable Batte n created to nformation v ulations. If y ery Recyclin o promote visit you ng ting the P ower Ada pter and B Battery hat the print st the powe at its output nnect the p rify that the nctioning pro ters interna er adapter (1 voltage is 1 power adapt printers Ba operly. al battery ch 100-240VA 19 VDC. ter to a pow attery Indica harger is fun C/50-60Hz, nctioning pr
, 12/24VDC roperly, perf C adapter) w rform the fol with a voltme llowing step ps. fy eter to verif wer source a ator is illum and then co minated. If il onnect it to t luminated, the printer. the chargin ng circuit is the battery is already fu ully charged d, the Batte ery Indicator r may not ill uminate. for five minu utes, discon nnect the po ower adapte er. er the batte rform a prin o Make s o Press a he printer s t complete a ce this test e the Batte er and batte r possible ca ery has been nter Self-Tes sure the pri and hold th uccessfully and the prin has comple ry Indicator ery do not a auses and s n charged f st. nter is turne e Paper Fe prints the S nter turns of eted succes r will turn off appear to su solutions. ed off. eed Button w Self-Test, th ff, repeat th ssfully, allow ff. uccessfully while turning he battery is is test with w the batter g the printe s functional a known go ry to fully ch r on. If the Self f-Test does
. ood battery. harge. At th he end of th his pass these tests, refer r to the Trou ubleshootin g is test only g properly. g it may ho t the power verifies that This test do oes not prov e. old a charge r adapter, th vide a valid he internal c d indication charging cir of the relati cuit, and th ve capacity e battery ar y of the batt re ery 24 w www.printe k.com|P:
888.211.340 00|F:269. 222.1229|
E:info@pr rintek.com C. Troubleshooting When encountering problems, the cause may be the printer or may sometimes be due to other problems with your system. Please review the following tables to solve common problems you may encounter with your printer. You may also visit www.printek.com for additional FAQs that may assist you. If you are still unable to solve your problem, please contact the company from whom you purchased your printer since they are most familiar with your systems. If they are unable to help you, please contact Printek Technical Support at (800) 368-4636. I. General Error Conditions Whenever the printer detects an error condition the Alert (red) Indicator will either flash or stay on. In some cases the audible alarm will also sound. Please refer to the following table for a list of what causes these conditions and how they may be corrected. Error Indicator Flashes Possible Cause Paper Out or Paper Door not fully closed Solution Make sure the door is fully closed by opening the door and closing it again until the door clicks closed. Check the platen roller for damage. Divide long documents into individual pages. Printer power must be cycled to clear error. making sure the battery is seated with door closed. Recharge battery. Replace or recharge battery. May occur in extreme low humidity conditions. Turn printer back on with power button. Check building/vehicle circuit breakers/fuses. Check output of power adapter with voltmeter. Should be 19 VDC. Try new power adapter, or replace battery. Stays On, With Alarm Print job too large for printer memory II. Fault Description and Resolution Problem Printer will not turn on. Possible Cause Battery not installed properly Remove and reinstall battery Solution Printer turns itself off. Discharged battery Battery discharged Electrostatic discharge Battery Indicator does not light or does not stay lit when power adapter is connected. Battery already fully charged No action required. Power supply not receiving power Faulty power adapter Battery not charging. Faulty power adapter or battery 25 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Problem Poor print quality. Paper not feeding. Paper does not advance to black mark reliably. Paper not feeding reliably or print is compressed vertically Print Garbled. Printer will not print. Possible Cause Low battery Print head dirty Poor quality or old paper Obstruction in paper path, or paper improperly installed Poor quality paper Paper Door not fully closed Dirty Black Mark/Paper Sensor Black Mark density/contrast Poor quality paper Heavy or thick forms;
specialty paper with slick finish Paper Door not fully closed Low Battery Improper Interface configuration Paper Door not fully closed Low Battery Paper not loaded correctly Improper Interface configuration Solution Check and recharge battery. Clean print head. Refer to Maintenance section of this document. Verify paper from approved source. Try new roll of paper. Check paper path and reinstall paper (see Quick Start Instructions). Verify paper from approved source. Verify door is closed. Clean Sensor as described in Maintenance section of this document. Adjust Mark Sensitivity as described in Device Settings Menu . Verify paper from approved source. Lower the Max Paper Speed as described in Device Config Menu . Verify door is closed. Check and recharge battery. Verify printer and host settings match. Verify door is closed. Check and recharge battery. Check paper path and reinstall paper (see Quick Start Instructions). Verify printer and host settings match. Print a self-
test to verify printer settings and to verify printer is functioning properly. D. Obtaining Service If service is required for your printer, please contact the company where you purchased your printer. If they are unable to assist you, contact Printek Customer Service at (800) 368-4636 to obtain a Return Authorization Number. Printers without Return Authorization will not be accepted. 26 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com APPENDIX A. Appendix A FieldPro 581 Printer Specifications Printing Specifications Printing Method: Direct thermal. Printing Resolution: 203 dpi (8 dots per mm). Printing Speed: Up to 2 ips (11 pages per minute). Printing Width: Up to 8.27 (210mm) Fonts/Characters/Bar Codes Fonts: Virtually all TrueType fonts, from 6 cpi to 22 cpi depending on emulation chosen, plus scaling. International Characters: All common sets available via UTF-8 encoding. Unicode support. Bar Codes: Virtually all 1D and 2D codes supported, depending on emulation chosen. Downloadable firmware, fonts, graphics, and logos. Connectivity Standard (All Units): USB 2.0 PNP. USB-C input connector. Wireless Options:
Wi-Fi 802.11b/g/n compatible Software Drivers and Utilities: Drivers for XP, WIN 7, WIN 8, WIN 10. Print utilities and SDKs for Android. Native App and Web printing. Printer Setup via internal web page, access with browser from any host
(tablets and smartphones included). Emulations: Emulates many popular printer brands and languages including:
Zebra CPCL and ZPL, Extech, and ESC POS. Firmware can be upgraded as new emulations become available. Supports direct printing of Postscript, PDF, PBM, JPG, PNG, BMP, SVG and TIFF files. Print Media Paper Type: Direct Thermal Roll. Roll Size: Maximum roll diameter 2.125
(54 mm), roll widths from A4 to 8.5 (up to 216 mm). Roll Capacity Load Media: Approx. 100 (30 m) Fanfold Size: Maximum width 216 mm, maximum length 305 mm, maximum total thickness 15 mm using fanfold tray. Core Size: 0.75 (19mm) Recommended. Power Management Battery: Rechargeable 3 cell Lithium Ion, (11.1 V, 6000 mAh, 66.6 Wh). Endurance: Above 300 m printing per charge (@12.5% density). Power Option: 100-240 VAC wall adapter. When plugged in, the printer can be used while recharging the battery or can be run without the battery
(print & charge adapter). Physical Specifications D x W x H: 2.6 x 12.3 x 4.3 (66 x 312 x 109 mm) Weight: 3.4lbs. (1.5 kg) Environmental Specifications Operating Temp: -10 to 45C Storage Temp: -20 to 60C Humidity: 10% to 90% RH (non-
condensing). Operator Controls and Indicators 3 LED indicators for general fault, power and battery status indication. Buttons for power and paper feed. Sensors for paper out, black mark detection, and door open. Gas gauge on battery door. Memory Capacity 256 MB Flash, 512 MB DDR2. Standard memory supports large and graphic intensive print jobs. Durability and Reliability Durable PC-ABS case. MTBF: 10,000 hours in normal use. Regulatory Approvals FCC Class B, CE mark, RoHS, UL listed AC adapters. Warranty Depends on local requirements. Please contact your national DASCOM sales office. Accessories AC Wall Adapter, 100 to 240 VAC Print and charge version o Battery Options Data cable: USB (USB-A to USB-
C) Shoulder strap A4 paper width spacer Fanfold tray Media in Case Quantities Popular Mounting Systems In-Vehicle Systems o o Cart Mounting Systems o Fixed Mounting Systems 27 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com B. Appendix B Supplies and Accessories AC Charge & Print Adapter - North America, 100-240VAC 50/60Hz AC Charging Adapter - North America, 100-240VAC 50/60Hz USB Cable, A to C, 6 Ft. Shoulder Carrying Strap DP-581 Battery Charger 1 bay DP-581 Battery Charger 2 bay Spacer for 3" paper DP-581 DP-581 Battery (3 cell Li-ION; 33WH) DP-581 Battery, 5-Pack DP-581 Battery, 20-Pack Thermal Printhead Cleaning Pen (12/box) Part # ACCESSORIES 93181 93180 xxxxx 91868 93176 93177 93194 C. Appendix C Media Part # SUPPLIES 93104 93124 93106 91393 Type Part # Grade xxxxx 93110 xxxxx 93111 STANDARD Receipt Paper, 4.125" W (94 Linear feet per roll) STANDARD Receipt Paper, 3.125" W (94 Linear feet per roll) PREMIUM PREMIUM Premium Receipt Paper, 4.125" W (70 Linear ft per roll) Premium Receipt Paper, 3.125" W (70 Linear ft per roll) Qty 36 ROLLS 36 ROLLS 36 ROLLS 36 ROLLS D. Appendix D Mounting Options Part # PRECONFIGURED KITS xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx FieldPro 581 Round Base Mount with Bracket FieldPro 581 Magnetic Base Mount with Bracket FieldPro 581 Suction Base Mount with Bracket FieldPro 581 U-Bolt Mount with Bracket FieldPro 581 Round Base Mount with Long Arm Bracket FieldPro 581 Mounting Pole with Bracket Part # PRINTER ATTACHMENTS xxxxx xxxxx FieldPro 581 Direct Mount Plate *
FieldPro 581 Printer Plate With Ball
*For direct mounting. Not compatible with connecting arms or bases. Please contact your Printek sales representative for price and availability. 28 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Glossary of Terms 802.11 Wireless networking communication standards created by IEEE. Ad-Hoc A Wi-Fi network consisting of only stations (no access point). Same as Peer-to-
Peer. authentication The process a Wi-Fi station uses to identify itself to another station. baud rate The rate at which characters are transmitted over a serial interface. This is also often referred to as bits per second. client Any node on a network that requests services from another node (server). character pitch The horizontal spacing of characters. Measured in cpi. cpi default DHCP dpi font Characters per inch. Value or configuration assumed when the printer is powered on or reset. Dynamic Host Configuration Protocol. A method used to centrally control the assignment of IP addresses on a network. Dots per inch. Generally used to refer to graphics density or resolution. A group of characters of a given shape or style. infrastructure A Wi-Fi network consisting of stations connecting to a wired network or other stations via an access point. interface The connection between the printer and the host computer. IP LAN LED lpi Internet Protocol. A specification for packets, or datagrams, of data and an addressing method to allow the exchange of data with another system. Must be combined with another protocol such as TCP to create a complete connection with the other system. Local Area Network. Light emitting diode. Lines per inch. margin An area along any edge of a form where data may not be printed. Peer-to-Peer A network consisting of only stations (no access point or central server). Same as Ad-Hoc. reset 29 Initialization of various operating features of the printer to the value or state assumed when the printer is powered on. www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com server SSID TCP Any node on a network that provides services to another node (client). Service Set Identifier. An identifier attached to packets on a Wi-Fi network that identify the particular network the packets are intended for. Transmission Control Protocol. A specification that controls the connection between systems on a network. top of form The vertical position where the first line is printed on the paper. Also the position the paper is advanced to when a form feed (FF) character is received from the host or the Form Feed button is pressed on the printer's control panel. USB WAN WEP Wi-Fi WLAN Universal Serial Bus. Wide Area Network. Refers to connections that allow one LAN to communicate with another LAN(s). Wired Equivalent Privacy. A security protocol for wireless LANs designed to provide data security similar to a wired LAN. Refers to any of the IEEE 802.11 standards. Wireless Local Area Network. A LAN made up of wireless nodes. 30 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com Index 802.11, 30 Add Enterprise Network, 11 Add Personal Network, 11 Address Method, 10 Ad-Hoc, 30 Alert, 6 Android, 3, 20 Android Tablets & Smart phones, 20 Apple, 3, 21 authentication, 30 Auto Off Timer, 15 AUTOIMAGE, 12 Available Networks, 11 Backup Distance Before Printing, 14 battery, 3, 5, 7, 23, 24, 25, 26 Battery Care, 23 Battery Disposal, ii Battery Installation, 5 baud rate, 30 Canadian Department of Communications Radio Interference Statement, i character pitch, 30 Charge Battery, 5 Charging the Battery, 23 Cleaning, 23, 29 client, 30 Com Port, 19 Configuration, 7, 22, 30 Connectivity Parameters, 8 Contrast, 14 Control Panel, 6 CPCL, ii, 12 cpi, 30 Current Emulation, 12 Current Logo Mapping, 16 Current Printer Config, 10 default, 30 Default Font, 12 Default Text Line Spacing, 13 Device Config, 13 DHCP, 30 31 discover name, 19, 21 Discoverablity, 9 dpi, 30 driver, 19 Drivers, 19 ESCPOS, 12 Fault Description and Resolution, 25 FCC Part 15 Class B, i features, 31 Font Aliases, 15 Fonts, 15 form, 31 Front Paper Sensor Threshold, 14 Gap Paper Sensor Threshold, 14 GateWay, 10 General Error Conditions, 25 Graphics, 16 IMAGE, 12 Image Parameters, 12 infrastructure, 30 interface, 30 IP Address, 10 IP54, 3 IPL, 12 LAN, 30 LED, 30 Left Margin, 14 lpi, 30 Maintenance, 2, 23, 26 margin, 30 Mark Seeking, 14 Max Mark Search Distance, 14 Max Paper Speed, 13, 26 Maximum Battery Life, 23 Media, 2, 22, 27, 28, 29 Mounting Options, 29 Obtaining Service, 26 Paired Mode, 8 pairing code, 19 Paper Energy Values, 14 Paper Feed Button, 6 Paper Load, 4 passkey, 19, 21 PDF, 12 Peer-to-Peer, 30 PIN, 8, 9 POSTSCRIPT, 12 power, i, ii Power Button, 6 Power On, 5 Quick Start Instructions, 4 Rear Paper Sensor Threshold, 14 reset, 31 Role Policy, 9 Safety Information, 24 Self-Test, 6, 24 server, 31 Set Date, 11 Set index, 16 Set Width, 16 Specifications, 2, 3, 27, 28 SSID, 31 Stop Distance after Mark, 14 SubNetMask, 10 Supplies and Accessories, 2, 29 25 TCP, 31 Testing the Power Adapter and Battery, 24 Troubleshooting, 2, 23, 24, Units, 13 Upload Digital Certificate, 12 Upload File, 16 Upload Font File, 15 USB, 19, 31 USB port, 2, 19 WAN, 31 web page, 7 WEP, 31 Wi-Fi, ii, 2, 20, 30, 31 WI-FI Config, 8, 9 Wifi Port, 10 Windows, ii, 3, 18, 19, 20 WLAN, 31 ZPL, 12 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com and Troubleshooting 32 www.printek.com|P:888.211.3400|F:269.222.1229|E:info@printek.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-10-11 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-10-11
|
||||
1 | Applicant's complete, legal business name |
Jiangmen Dascom Computer Peripherals Co.,Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0021247903
|
||||
1 | Physical Address |
No 399,Jin Xing Road,Jiang Hai District
|
||||
1 |
Jiangmen City Guang Dong Province, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
Z7O
|
||||
1 | Equipment Product Code |
DP581A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** H****
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
0750-********
|
||||
1 | Fax Number |
0750-********
|
||||
1 |
1******@qq.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | portable receipt and form printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
EST Technology Co.,Ltd
|
||||
1 | Name |
I****** H******
|
||||
1 | Telephone Number |
86-76******** Extension:
|
||||
1 |
j******@163.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0320000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC