all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 936.53 KiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Attestation Statements | |||||||
1 2 | External Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Internal Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | User Manual | Users Manual | 936.53 KiB |
DDP3 330 Seri Oper ies rators Manu ual D DP-3 mal Th herm 330 Prin nter r DASC COM Europe e GmbH Heuweg 3 3 89168 Ulm m Germany y
.com ww.dascom ww 5b 379925 pean standards low-voltage ele requirements by ectrical equipme y complying with nt. Furthermore h the Directive r e it fulfills the req relating to electr quirements for R romagnetic RoHS and R&TT TE ves is indicated b by the CE symb ol attached to th he device. fulfills the Europ This device compatibility y and relating to if applicable
. h the above me ntioned Directiv ity may be affec cted by:
mplying with the ce cables not co t instructions in t nce of important mponents not ap proved for this d manipulation e specifications the operators m device by the m manual anufacturer Dieses Ger Elektromagn werden die A t zu den oben a Konformitt kann on nicht spezifiz ng wichtiger Hin Bauteilen, die n ch Unbefugte t erfllt die Anfo netischen Vertr Anforderungen b angefhrten Rich n beeinflusst wer ierten Schnittste nweise der Bedi nicht vom Herste Europischen N bezglich Elekt S und falls anwe h das am Gert orderungen der glichkeit sowie bezglich RoHS htlinien ist durch rden durch:
ellen g enungsanleitun eller fr dieses G Gert freigegeb en wurden Normen durch E rischer Betriebs endbar R&TTE e angebrachte CE Einhaltung der R smittel mit Niede erfllt. E-Zeichen geke nnzeichnet. Richtlinien bezg erspannung. Des glich der s Weiteren B 15 Class B ith Part 15 of t ce complies wi ce may not cau use harmful in t any interferen ce must accept or modification ns not expressl e equipment. ent has been te These limits ar ested and foun re designed to the FCC Rules nterference. nce received, ly approved b s. Operation is s subject to the e following tw wo conditions:
including inte y the party res erference that m sponsible for c may cause und compliance co desired operat ould void the u tion. user's authority y nd to comply w o provide reaso with the limits onable protect s for a Class B ion against ha B digital device armful interfer e, pursuant to rence in a resid Part 15 of the e dential ent generates u may cause har a particular ins e determined b of the followin uses and can r rmful interfere stallation. If th by turning the ng measures:
radiate radio fr ence to radio c his equipment equipment off frequency ener communicatio t does cause ha ff and on, the u rgy and, if not ons. However, armful interfer user is encoura installed and there is no gu rence to radio aged to try to c used in accord uarantee that in or television r correct the inte e dance with the nterference wi ill reception, erference by or relocate the separation bet equipment into dealer or an ex e receiving ant tween the equi o an outlet on xperienced rad tenna. ipment and rec a circuit diffe dio/TV technic ceiver. erent from that cian for help. t to which the receiver is co onnected. n Departm ment of Co ommunica ations Ra dio Interf ference St tatement Conformity with Note: Conform
- using interfac
- non-observan
- installing com
- unauthorized Die Konformit Hinweis: Die K
- Benutzung vo
- Nichtbeachtu
- Ersetzen von
- Eingriffe durc FCC Part 1. This devic 1) This devic 2) This devic 2. Changes o to operate the This equipme FCC Rules. T installation. This equipme instructions, not occur in a which can be one or more o Re-orientate Increase the s Connect the e Consult the d Canadian i www w.dascom.com m Thisdeviceco conditions:1) interferencet transmitterm byIndustryCa sochosenthat communicatio Leprsentapp L'exploitation l'utilisateurde compromettre peutfonctionn IndustrieCana omplieswithInd
)thisdevicema hatmaycause ayonlyoperate anada.Toredu ttheequivalen on.Maximump dustryCanada aynotcauseint undesiredope eusinganante ucepotentialra ntisotropically poweroutputp licenseexempt terference;2)t rationofthede ennaofatypea diointerferenc radiatedpowe plusmaximum tRSSstandard(
thisdevicemus evice.UnderIn andmaximum(
cetootheruser r(e.i.r.p.)isnot antennagaino
(s).Operationi stacceptanyin ndustryCanada
(orlesser)gain rs,theantenna tmorethantha oftheEUTis:4. issubjecttothe terference,inc aregulations,th approvedfort atypeanditsga atnecessaryfo 5W/m2,Limiti efollowingtwo o luding hisradio thetransmitter r ainshouldbe orsuccessful is10Wm2. pareilestconfo estautorisea el'appareildoit elefonctionnem neravecunean ada. ormeauxCNRd auxdeuxcondit tacceptertout ment.Conform ntenned'untyp d'IndustrieCana tionssuivantes brouillageradi mmentlarg peetd'ungain adaapplicables
:(1)l'appareil iolectriquesub glementationd maximal(ouin sauxappareils nedoitpaspro bi,mmesileb
'IndustrieCana nfrieur)approu radioexempts oduiredebrouil brouillageestsu ada,leprsent uvpourl'met sdelicence. illage,et(2) usceptibled'en n metteurradio o tteurpar Danslebutde typed'antenn l'intensitnc gaind'antenn erduirelesrisq neetsongaind cessairel'tab emaximalduE quesdebrouilla desortequelap blissementd'un EUTest:4.5W/
ageradiolectr puissanceisotro necommunicati
/m2Limiteest1 riquel'intenti operayonne ionsatisfaisant 10W/m2 iondesautresu quivalente(p.i te.Lapuissanc utilisateurs,ilfa i.r.e.)nedpass cedesortiemax autchoisirle sepas ximaleplus Battery D isposal Only disposes of used batterie es according ins tructions and/or r your local regu ulations. ments:
registered trade a registered tr L and ZPL are emark of DASCO rademark of Bl registered trad OM Europe Gm luetooth SIG, demarks of Ze bH Inc. ebra Technolo ogies a registered tra demarks are th SCOM Europe G ademark of M he property of GmbH, Ulm, Ge Microsoft Corpo their respectiv rmany. All right oration ve owners. ts reserved. Acknowledgm DASCOM is a Bluetooth is a Zebra, CPCL Windows is a All other trad 2015 by DAS Read ventilated. Do all set up and o not operate nea operating instruc ctions before pro e. ar a heat source oceeding with o peration. Do n ot operate in an n enclosure unle ess properly ii www w.dascom.com m Lesen geschlossenen Betrieb n Sie vor der Inb n Raum, es sei d betriebnahme die denn dieser wird e Aufbau- und B d ordnungsgem Bedienungsanle belftet. Neh itung Betreiben hmen Sie den Dr n Sie den Drucke rucker nicht in d er nicht in einem der Nhe einer W m kleinen, Wrmequelle in No us replacement pa may make the certain the prin Connecting this substances. D ser-serviceable p arts is required t product unsafe nter is disconnec s printer to an u Do not operate n parts inside. Re to warrant prope to operate. The cted from AC po ngrounded rece ear liquid or spi efer service or re er, safe operatio e print head and ower before rem eptacle can resu ll liquid into the epairs to a quali on. Any alterati motors get hot moving any cove ult in electrical sh printer at any tim ified service pro ion or modificati during use. Wa ers or performin hock. Never pla me. ofessional. Use on of this device ait until they coo ng any required ace the printer n of genuine DAS e voids the user ol before touchin cleaning or mai near inflammable SCOM r warranty and ng them. Make ntenance. e or explosive Enth qualifiziertes K Betrieb zu gew des Produkts g bevor Sie sie b abnehmen ode Elektroschock Drucker nicht i lt keine Teile, d Kundendienstper whrleisten. n gefhrden. Wh berhren. Verge er das Gert rein fhren. Setzen n der Nhe von die vom Bediene rsonal. Die Verw derungen oder rend des Drucke wissern Sie sich nigen bzw. warte Sie den Drucke Flssigkeiten u er instandgesetz wendung von ec Modifikationen d ens werden Dru h, dass der Druc en. Schlieen S r niemals in die und lassen Sie k zt werden knne chten DASCOM dieses Gerts m uckerkopf und M cker nicht mehr Sie diesen Druck Nhe von feuer keine Flssigkeit en. Bitte wenden Ersatzteilen ist machen die Gara Motoren hei. Wa an die Stromqu ker nicht an eine r- oder explosio ten in den Druck n Sie sich bei Ins notwendig, um antie ungltig un arten Sie, bis sic elle angeschlos e ungeerdete Ste nsgefhrlichen S ker gelangen. n standsetzung od ordnungsgem nd knnen den s ch die Teile abg ssen ist, bevor S eckdose an; die Stoffen. Betreibe der Reparatur a en, sicheren sicheren Betrieb b gekhlt haben, Sie Abdeckunge es kann zum en Sie den n Specificat tions are su ubject to ch hange with out notice. DASCOM Re Germany :
UK:
France:
Singapore (AP Americas:
China:
epresentative es:
DASCOM DASCOM DASCOM P): DASCOM Dascom A Jiangmen M Europe GmbH M GB Ltd, Hart H M Europe GmbH M AP Pte Ltd, 21 Americas Corp, Dascom Comp
, Heuweg 3, D-8 House, Priestley
, 117 Avenue V Bukit Batok Cre 34 Lakeview Co puter Periphals C 89079 Ulm, Pho Road, Basingst ictor Hugo 9210 escent, #29-81, ourt, Verona, VA Co., Ltd, No.399 one: +49 (0) 731 toke, Hampshire 0 Boulogne-Billa WCEGA Tower A 24482, USA, P 9, jinxing Road, 2075 0 e, RG24 9PU, P ancourt, Phone:
r, 658065, Phon Phone: +1 (877) Jianghai District Phone: +44 (0) 1
: +33 (1)73 02 5 ne: +65 6760 88
) 434 1377 t Jiangmen 256 481481 51 98 833 iii www w.dascom.com m of Conten Table o on.................. Introductio atures ........... Printer Fea t Instruction Quick Start er Load ........ A. Pape ter Installatio B. Print ery Installatio C. Batte rge Battery ... D. Char er On ........... E. Powe trol Panel ..... F. Cont orming a Prin G. Perfo ion ............... Configurati all Config Too A. Insta figuration Set B. Conf the Printer Integrating dows Deskto A. Wind vers ............... Print Driv U I. SB ............... II. B luetooth G luetooth W III. B B. Wind dows Tablets C. Andr roid Tablets &
B luetooth ....... I. II. W Wi- Fi ............. e Tablets &
D. Appl B luetooth ....... .................... Media ........ dard Media .. A. Stan k Mark Media B. Black Maintenanc ce and Trou aning ............. A. Clea B. Batte ery Care ....... Getting the Ma I. G II. C Charging the B Additional Bat III. A esting the Po IV. Te C. Trou bleshooting . General Error G I. ault Descript Fa II. aining Service D. Obta
.................... APPENDIX A. Appe endix A DP endix B DP B. Appe f Terms ....... Glossary o Index ......... .................... nts
.................... ................... ns ................. ................... n ................. on ................ ................... ................... ................... nter Self-Tes
.................... ol ................. tup .............. into your Bu p Computers
.................... ................... eneral ......... Windows 7 an s and Smartp
& Smart phon
.................... ...................
& Smartphon
.................... ................... ................... a Position .... bleshooting
.................... ................... aximum Batt Battery ........ ttery and Saf ower Adapter
.................... Conditions . tion and Reso e .................. ................... P-330 Printer P-330L Printe
.................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... t .................. ................... ................... ................... usiness App s .................. ................... ................... ................... d above ...... phones ......... nes .............. ................... ................... nes .............. ................... ................... ................... ................... g ................... ................... ................... ery Life ........ ................... fety Informati r and Battery
.................... ................... olution ......... ................... ................... Specification er Specificatio
.................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... plications ... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... on ............... y ................... ................... ................... ................... ................... ................... ns ................ ons .............. ................... ................... I. .................... .................... .................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... .................... .................... .................... .................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... .................... ................... ................... .................... .................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ......... 2
.......... 3
.......... 4
.......... 4
.......... 5
.......... 5
.......... 6
.......... 6
.......... 7
.......... 7
.......... 8
.......... 8
.......... 9
........ 11
........ 11
........ 11
........ 11
........ 11
........ 11
........ 12
........ 12
........ 12
........ 12
........ 12
........ 12
........ 13
........ 13
........ 13
........ 14
........ 14
........ 14
........ 14
........ 14
........ 15
........ 15
........ 16
........ 16
........ 16
........ 17
........ 18
........ 18
........ 19
........ 20
........ 22 1 www w.dascom.com m Introduction Thank you for purchasing the Tally Dascom DP-330 Series mobile thermal printer also referred to in this manual as the DP-330 (for Receipt) or DP-330L (for Label). The DP-330 series prints on special thermal media supplied in roll form up to 80 mm wide. All models are equipped with a USB port which supports cabled communications. All models support an optional internal Bluetooth interface. Complete specifications may be found in Appendix A DP-330 Printer Specifications and Appendix B DP-330L Printer Specifications. The remainder of this manual focuses on preparing the printer for initial use and performing tasks that will be encountered during daily use. Maintenance and Troubleshooting describes how to maintain the printer for optimal performance and has information on how to diagnose any problems that may occur. 2 www.dascom.com Printer r Feature es Eas Qui IP5 Prin Ext Prin The Com Em sy-to-read c ickly prints a 54 rated for w nt speeds u tensive fonts nter configu e latest in ba mpatible wit mulations tha control face a wide varie water and d p to 4 ips s, character ration is qu attery techn th Windows at allow the 30 features
:
Your DP-3 and simple ety of tickets dust resistan drop-in pap s, receipts, a nce... plus r per loading and labels (
rated for rep
(330L) peated 6-foo ot drops to c concrete abilities r sets, bar c ick and eas nology provi s, Windows printer to be codes and g sy with a set des for full-
Mobile, App e a drop-in graphic capa tup tool shift printing ple iOS, and replacemen es g in all mod d Android nt for nearly any mobile e printer For detaile DP-330L S d specificat Specification tions referen ns. nce Append dix A DP-3 330 Printer S Specificatio ons and App pendix B 3 www w.dascom.com m Quick S A. Pape Start Ins r Load structio ons 4 www w.dascom.comm B. Printe You could 1) Des Theprinter printerisp paperhold 2) Han The hand s attach the Insert the Loop the e Repeat th er Install put the prin sktop Instal lation nter on desk lation ktop, carry w with your ha nd or carry it with the s should strap p (option) rmustbein placedinas der.Alsoens nstalledhor tablepositi suretherei izontally.Pl onandther senoughsp acetheprin reiseasyac paceforsuff nteronaso ccessforuse ficientvent olid,flat,sta erstotheco ilationandf blesurface;
ontrolpane fortheprin
;ensurethe e elandroll tout. ns Strap Ins strap provid hand strap end of the s end of the s is process f stallation des the user to the printe strap throug strap back a for the oppo r with a conv er:
gh the cut ou around the c osite end of ut on the fro cut out and s the strap. ont of the pr secure it ov rinter. ver. venient and d secure me ethod of carr rying the pri inter. To 3) Sho oulder Strap p Installation n If your prin cut-outs in strap to fas Hold the bu C. Batte ter is equip each top co sten. uckle and p ery Instal ull the strap lation ped with the orner of the e shoulder s printer and strap option d secure the n. Insert eac e looped end ch end of the d over the b e shoulder s button on the e strap into th e end of the e p as shown below until you achieve e the desire ed length. 5 www w.dascom.com m D. Charge Battery Uncover the printer ports and plug in your AC power adapter to the Power port (must be a DASCOM-
supplied accessory). The yellow LED will show solid ON while the printer battery is charging. E. Power On Depress the Power button on the control panel. The green LED and the red LED will both be lit while the printer is going through its startup sequence (about 10 seconds). The red LED will go off, leaving the green LED on to indicate the printer is ready to print. 6 www.dascom.com F. Contr Control P Panel rol Panel l Power r Button eed Button cation ffer Buffer de
/Lid Open he peeler k/Label g error over heat over cold Error ad battery e mode mode ng Paper Fe Indic Data in Buf No Data in Ready Setup Mod Paper End Media on t Black Mark positioning Print head Print head EEPROM E Cannot rea volume Power sav Download Downloadi G. Perfo orming a Up Down IP over USB B on/off Press & Rele ease P d P Press & Hold P Press twice Power U Power D Toggle I Advance Print Se Enter Co e paper etup Report onfiguration n Mode
(Green/
Power (
ange) Red/Ora ashing (Gree en) Fla O On (Green) r to buffer s tatus Refer
) O On (Orange Refer r to buffer s tatus On (Red) On (Red) r to buffer s Refer tatus Off Off Flashing (
Flashing Green-Red g (Orange)
) O On (Green) Printer S Self-Test t d for 3 seco d & Turn on nds the printer Green/
Alert (G range) Red/Or O Off O Off O Off O Off On
(Red) P Press once P Press & Hold P Press & Hold B Battery Yellow)
(Y A According g to actual volume On (O Flashin Orange) ng (Red) On (G On (G On On (G Green) Green)
(Red) Green) O Off Buzzer
/
/
/
/
/
/
buzz every y 2 seconds s
/
/
/
/
/
/
/
7 With power r on, press t the paper fe eed button f for three sec conds. www w.dascom.com m Config Configurati
(www.dasc compatible A. Insta 1. Double uration ion of the D com.com). T e with your D ll Config e click the co DP-330 print This allows DP-330 com Tool onfig tool so oftware. Clic ck Next to c er is done t you to conf mmunication onfiguration hrough a co rinter from a figure the pr n capabilities s. tool downlo any window oaded from ws computer the website e r and is folder, and click Next to o continue. ontinue. www w.dascom.com m 2. Select installation 8 3. Click ne ext to contin nue and com mplete insta allation. iguration n Setup he printer ON N. sure you ins stalled the la atest configu uration tool. ct a USB ca able betwee en the printe er and a PC
. he configura ation tool on n the deskto op. You cou uld change t the settings
. ween inches o or millimeters s. Default se tting is inche es. 5.5 ips, Defau eavy paper st ult = 5.0 tock, you ma y need to de ecrease the p paper speed t to prevent pa aper jam ont, Rear, Ga g regular or l ll use the ind ap. Default= O label media w dicator accord Off (Note: Re with appropri ding to the us ear and Gap iate characte ser choice he apply to 530 eristics. To a ere. 0L models on align the print nly) ted image to er Sensor T lues 0-100%
g paper with a Threshold
%. Default val a black on th lue is 75%
e front adjus st this setting to insure the e paper stops s at the black k mark. If the p printer is not detecting bla ack marks re www liably, set the w.dascom.com e Mark Sens m itivity to a low wer value. B. Confi 1. Turn th 2. Make s 3. Connec 4. Open t Units Select betw Max Paper Possible va When using errors. Mark Seek Possible va Set the valu the media, t Front Pap Possible va When using 9 r Speed lues: 1.0 to 5 g labels or he king lues: Off, Fro ue when usin the printer wi If the printer is detecting false check paper conditions, set the Mark Sensitivity to a higher value. If the printer is detecting black marks where none exist, set the Mark Sensitivity to a higher value. Rear Paper Sensor Threshold (DP-330L models only) Possible values 0-100%. Default value is 75%
When using paper with a Black on the back adjust this setting to ensure the paper stops at the Black Mark. If the printer is not detecting Black Marks reliably, set the Mark Sensitivity to a lower value. If the printer is detecting false Check Paper conditions, set the Mark Sensitivity to a higher value. If the printer is detecting Black Marks where none exist, set the Mark Sensitivity to a higher value. Gap Paper Sensor Threshold (DP-330L models only) Possible values 0-100%. Default value is 75%
When using labels without a Black Mark, adjust this setting to insure the label stops at the gap in between labels. If the printer is not detecting gaps between labels reliably, set the Gap Sensitivity to a higher value. If the printer is detecting gaps where none exist, set the Gap Sensitivity to a lower value. Backup Distance Before Printing Used with Mark Seek. User defined. This is the distance the printer will pull in the paper before starting to print. Max Mark Search Distance Used with Mark Seek. User defined. This is the distance the printer will advance paper to seek the mark before displaying a Paper Out condition. Stop Distance after Mark Use with Mark Seeking. User defined. This is the distance the printer will advance the paper after the mark is detected. Left Margin Setting this value will tell the printer how far from the left edge of the paper to start the print job. Contrast Possible values 0 10. Default value is 5 The lower the value the lighter the print. The higher the value the darker the print. Paper Energy Values This is a locked value. These settings are supplied by the paper manufacturer. The default settings cover most grades of paper. If you are using non-standard paper consult the paper manufacturer for recommended settings. 10 www.dascom.com Integrating the Printer into your Business Applications Step by Step Creating a Link from Host to Printer A. Windows Desktop Computers Print Drivers You may download the appropriate Windows driver from our website. Install the printer driver by the standard method for your version of Windows. I. USB a) Install the printer driver onto your host before connecting the printer. Follow prompts displayed during installation. b) Plug the printer into a USB port on your host system using a mini-USB cable. c) The printer will appear in the Unspecified devices section. Right click on the icon. d) In the popup window, select the Hardware tab. Note the USB port number displayed. e) Using the Add Printer wizard, install the printer using the driver file obtained from DASCOM and the USB port number noted above. f) After the printer driver installs, the printer will appear as Dascom 3-inch printer under the Printers and Faxes heading of your Windows Devices and Printers screen. II. Bluetooth General a) Turn on printer. Make sure Bluetooth on your host device is turned ON. b) Your host Bluetooth manager may automatically scan for new devices, or you may need to tell it to scan. The discover name of the DP-330 printer will be DP-330-XXXxxxxx, where XXXxxxxx = the Printer Serial Number. c) For Pairing, the default passkey is 0000. Note: Bluetooth host devices pair after discovery, but only connect to Bluetooth printers when the host application has asked it to print. III. Bluetooth Windows 7 and above a) Turn on printer. Make sure Bluetooth on your host device is turned ON. b) Open the Devices and Printers folder. c) Select Add a Device. The printer will display using the discover name listed above. d) Select the printer from the list of devices. e) Select Enter the Devices Pairing Code. The default pairing code is 0000. f) A window will display informing you the device was successfully added, and the printer name will appear in the devices list. Close this. g) Printer now appears under Printer and Faxes heading of the Devices and Printers screen, as DP-330-serial #. The icon may show that it is still configuring. h) Right click on the printer name or icon and select Properties. Select Services tab and deselect all items except for SPP. i) Now select Hardware tab. A virtual com port number will be listed here make note of this COM Port number. Use this Com Port number when setting up the printer driver, under the port settings. 11 www.dascom.com j) k) Install the p file obtaine After the pr Printers an ows Tab s feature an printer drive ed from DAS rinter driver nd Faxes h blets and nd/or specif er. Using th SCOM and t installs, the heading of y Smartph ic directions e Add Prin the COM po e printer will your Window hones s for use we ets & Sm mart phon nes ter wizard, ort number n l appear as ws Devices install the p printer using e. noted above er the DP-330-se erial # unde rs screen. s and Printe g the driver ere not avail lable as of t this printing
. B. Wind Thi C. Andro I. Blu a) b) oid Table uetooth Turn on pri Your host B tell it to sca XXXxxxxx For Pairing The printer c) d) te: Android st applicatio
- Fi s feature an Not hos II. Wi-
Thi D. Apple Blu I. Thi e Table uetooth s feature an 12 inter. Make Bluetooth m an. The disc
= the Printe g, the defaul r should app e sure Blueto manager ma cover name er Serial Nu lt passkey is pear in your ooth on you y automatic e of the DP-
mber. s 0000. r paired dev vices list. ur host devic cally scan fo
-330 printer ce is turned or new devic will be DP-
ON. ces, or you
-330-XXXxx o may need to xxxx, where e devices pa n has asked ir after disco d it to print. overy, but o only connec ct to Bluetoo oth printers when the nd/or specif ic directions s for use we ere not avail lable as of t this printing ets & Sm martphon es nd/or specif
. ic directions s for use we ere not avail lable as of t this printing www w.dascom.com m Media A. Stand DASCOM complete a B. Black For automa When usin automatica pressing th For non-au utomatic pap s. commands dard Med dia offers a var and up to da riety of medi ate descripti ia types. Yo ion of our co ou may con onsumables ntact your DA s and acces ASCOM sa ssory produc les represe cts. ntative for a a k Mark M Media Pos sition atic ticket pr g Mark Sen ally position he Paper Fe rinting, the B nsing mode the output f eed button. Black Mark
(see Config for tear-off a should be p guration, ea and printing positioned a rlier in this d g following a as shown in document), a Form Feed the figure b DP-330 pri d command below. nters will d or by per position ing, refer to o the Integra ators Guide e for sensing g and positio oning 13 www w.dascom.com m Maintenance and Troubleshooting A. Cleaning In normal environments, the printer should be cleaned after printing a few rolls of paper or if there are voids in the printout. For optimum performance and life, you should clean the Print Head and Platen Roller whenever you load new paper. To clean the printer areas as described below, use a Thermal Head Cleaning Pen and MCR Cleaning Card available from DASCOM, or you may use cotton swabs moistened with isopropyl alcohol. Turn the printer off. Open the Paper Door and remove the paper. Using a Thermal Head Cleaning Pen, clean the white ceramic surface on the Print Head. Caution: Do not use sharp objects to clean the print head. This may damage the printer and require service. Such damage is not covered under warranty. Clean the Black Mark Sensor below the print head. Clean the Tear Bar. Clean the Platen Roller. Turn the Platen Roller with your finger to clean the entire surface. If a Magnetic Card Reader is installed, pass and MCR Cleaning Card through the MCR slot to clean the head. You may also experience a buildup of paper dust in the printer. This may be removed using a can of compressed air or by vacuuming. To clean the exterior of the printer, turn the printer off and use a soft cloth moistened with a mild detergent. B. Battery Care I. Getting the Maximum Battery Life New batteries are shipped in an uncharged state and must be charged for at least 4 hours prior to the first use. Maximum battery capacity is not reached until after completing a minimum of three complete charge and discharge cycles. II. Charging the Battery 14 Plug the power adapter into a power source appropriate for the adapter being used. Plug the power adapter into the power connector on the side of the printer. The printers battery charging circuitry will analyze the condition of the battery and begin charging it if necessary. If the battery is not fully charged, charging will begin and the Battery Indicator will illuminate. When the battery is fully charged, the Battery Indicator will turn off. Charging may take up to 8 hours (4 hours with external desktop charger accessory) depending on the condition of the battery. The printer may be used while the battery is charging, but this will extend the time required to fully charge the battery. www.dascom.com The will e power ada not cause d apter may re damage to t emain conn the printer o ected to the or battery. e printer to k keep the ba attery fully ch harged and tional Batt tery and S Safety Info rmation The e DP-330 se eries printer rs use a 11. 1 volt 3000 mAH Lithiu um Ion batte ery. on: Risk of e es accordi explosion i ng to the in if battery is s replaced s. nstructions by incorrec ct type. Dis spose of u sed e recommen ke the batte rage tempe tery at temp rmanently lo not disasse plode. nded ambie ry out of the rature is 40 peratures ab ose charge c emble, short ent temperat e printer wh 0-104 Fahre bove this ra capacity. t circuit, hea ture for cha en storing t enheit (4-40 nge for long rging is 68-
the printer fo 0 Centigrad g periods of 77 Fahren or long perio de). Do not f time or the Centigrade heit (20-25 e). ry The batter ods of time. store a fully y charged ay e battery ma at above 80 0C, or incin erate the ba attery. The b battery may y ations Onl ly dispose o of used batte eries accord ding to your r local regul ting the Po ower Adap pter and B Battery hat the print st the power t its output v nnect the po rify that the ctioning pro ters interna r adapter (1 voltage is 1 ower adapte printers Ba operly. l battery cha 00-240VAC 9 VDC. er to a powe attery Indica arger is func C/50-60Hz, ctioning pro 12/24VDC a operly, perfo adapter) wit orm the follo th a voltmet
. owing steps ter to verify er source an ator is illumin nd then con nated. If illu nnect it to th uminated, th e printer. he charging circuit is he battery is s already fu ully charged
, the Battery y Indicator w will turn off after a shor rt time. or five minut er the batter rform a print o Make s o Press a he printer su complete a ce this test e the Batter er and batte possible ca ry has been ter Self-Tes sure the prin and hold the uccessfully and the print has comple ry Indicator ery do not ap auses and s n charged fo st. d off. nter is turne ed Button w e Paper Fee elf-Test, the prints the S f, repeat this ter turns off sfully, allow eted succes will turn off. ppear to suc ccessfully p solutions. tes, disconn nect the pow wer adapter
. while turning e battery is s test with a w the battery the printer functional. a known goo y to fully cha on. If the Self-T od battery. arge. At the Test does e end of this s pass these t ests, refer t to the Troub bleshooting s test only v g properly. T g it may hol the power a verifies that This test do oes not prov
. ld a charge. adapter, the vide a valid i e internal ch indication o harging circu f the relative uit, and the e capacity o battery are of the batter ry 15 www w.dascom.com m III. Addit Cautio batteri The Tak stor batt per Do exp IV. Test To verify th Tes that Con Ver fun Note: If t Afte Per If th not Onc time If the printe section for Note: Thi functioning or how long e cause ma ase review th y be the pri he following nter or may g tables to s y sometimes solve commo s be due to on problems other s you may bleshoot ting ountering pr with your sy with your pr roblems, the ystem. Plea rinter. ral Error C Conditions s C. Troub When enco problems w encounter I. Gener Whenever some case causes the Error Indic Flashes, W the printer d es the audib ese conditio detects an e ble alarm wil ns and how error condit ll also sound w they may b rt (red) Indic ion the Aler refer to the f d. Please r be corrected d. cator will eith following tab her flash or ble for a list stay on. In n t of what cator With Alarm le Cause Out or Pape Possib Paper O closed er Door not f fully Sol Inst Pap the Mak clos and doo the Ver sett Men be c ution tall paper an per Feed Bu error. ke sure the sed by open d closing it a or clicks clo platen rolle ify commun tings in the I nu. Printer cycled to cle nd press the e utton to clea ar door is fully y or ning the doo he again until th ck osed. Chec r for damag ge. nications Interface power must t ear error. Stays On, W With Alarm Commu unications e rror Descriptio on and Res solution I Fault I. Problem Printer will not turn on
. P B ossible Ca attery not in ause nstalled prop Printer turn ns itself off. Discharged b D attery disch B E lectrostatic battery harged discharge Battery Ind light or doe power ada dicator does es not stay l pter is conn s not lit when nected. B attery alrea P ower adapt po ower Fa aulty power ady fully cha er not recei r adapter B 16 attery not in nstalled prop www w.dascom.com m ery ery. Sol perly Rem mak sea Rec Rep May hum prin butt arged No ving Che brea Che ada Sho perly Rem mak sea einstall batte e battery is or closed. ery. harge batte xtreme low tions. Turn with power r ution move and re king sure th ted with doo charge batte place or rec y occur in ex midity condit nter back on ton. ired. action requ
/vehicle circ eck building
. akers/fuses of power eck output o apter with vo oltmeter. VDC. ould be 19 V einstall batte move and re e battery is king sure th ted with doo or closed. cuit ery Problem Battery not charging. Poor print quality. Paper not feeding. Paper does not advance to black mark reliably. Paper not feeding reliably or print is compressed vertically Print Garbled. Printer will not print. Possible Cause Faulty power adapter or battery Low battery Print head dirty Poor quality or old paper Obstruction in paper path, or paper improperly installed Poor quality paper Paper Door not fully closed Dirty Black Mark/Paper Sensor Black Mark density/contrast Poor quality paper Heavy or thick forms;
specialty paper with slick finish Paper Door not fully closed Improper Serial Interface configuration Paper not loaded correctly Cannot print via optional interface. Interface not configured correctly Solution Try new power adapter, or replace battery. Check and recharge battery. Clean print head. Refer to Maintenance section of this document. Verify paper from approved source. Try new roll of paper. Check paper path and reinstall paper (see Quick Start Instructions). Verify paper from approved source. Verify door is closed. Clean Sensor as described in Maintenance section of this document. Adjust Mark Sensitivity as described in Device Settings Menu . Verify paper from approved source. Lower the Max Paper Speed as described in Device Settings Menu . Verify door is closed. Verify printer and host settings match. Check paper path and reinstall paper (see Quick Start Instructions). Print a self-test to verify printer settings. Make sure printer and host set ups match. D. Obtaining Service If service is required for your printer, please contact the company where you purchased your printer. 17 www.dascom.com APPENDIX A. Appendix A DP-330 Printer Specifications Printing Specifications Printing Method: Direct thermal. Printing Resolution: 203 dpi (8 dots per mm). Printing Speed: Up to 4 ips. Printing Width: Up to 72 mm. Fonts/Characters/Bar Codes Fonts: Virtually all TrueType fonts, from 6 cpi to 34 cpi depending on emulation chosen, plus scaling. International Characters: Most common sets available. Unicode support. Bar Codes: Virtually all 1D and 2D codes supported, depending on emulation chosen. Downloadable firmware, fonts, graphics, and logos. Connectivity Standard (All Units): USB 2.0 PNP. Wireless Options:
Bluetooth Complete Bluetooth 4.0 Stack Dual Mode with EDR Antenna Gain: 0.5 dBi Universal Port: Data and power port allows connection of external devices such as MCR, barcode scanners, biometrics, RFID. Software Drivers and Utilities: Drivers for XP, WIN 7, WIN 8. Compatible with Windows CE/Pocket PC, Windows Mobile, Apple iOS, Android. Print utilities and SDKs for all platforms. Native App and Web printing. Printer Setup via internal web page, access with browser from any host
(tablets and smartphones included). Emulations: Emulates many popular printer brands and languages including:
Zebra CPCL and ZPL, Extech, IPL, and ESC POS. Firmware can be upgraded as new emulations become available. Supports direct printing of Postscript, PDF, PBM, JPG, PNG, BMP, SVG, &
TIFF files. Print Media Paper Type: Direct Thermal Roll. Roll Size: Maximum roll diameter 2.0
(51 mm), roll widths up to 3.125 (80 mm). Roll Capacity: Approx. 94 28.6 m), creating 188 6 long receipts. Core Size: 0.75 Recommended (19 mm). Power Management Battery: Rechargeable 3 cell Lithium Ion, (11.1 V, 3000 mAh, 33.3 Wh). Endurance: Over 3,500 printed inches per charge. Power Option: 100-240 VAC wall adapter, or 12-24 VDC in-vehicle adapter. When plugged in, the printer can be used while recharging the battery or can be run without the battery
(print & charge adapter). Physical Specifications L x W x H: 6.1 x 4.6 x 2.7 (15.5 x 11.7 x 6.9 cm). Weight: 24 ounces (.68 kg) with battery. Environmental Specifications Operating Environment: -10 to 40C/
0% to 65% RH (non-condensing). Storage Temp: -25 to 65C) /
0% to 98% RH (non-condensing). Rated IP54 per IEC 529 Operator Controls and Indicators 3 LED indicators for general fault, power and battery status indication. Buttons for power and paper feed. Sensors for paper out, black mark detection, and door open. Gas gauge on battery door. Memory Capacity 4 MB Flash, 32 MB DDR2. Standard memory supports large and graphic intensive print jobs. Durability and Reliability Survives multiple 6 foot drops to concrete (each face) per IEC 68-2. MTBF: 10,000 hours in normal use. Regulatory Approvals FCC Class B, CE mark, RoHS, UL listed AC adapters, e-mark. Warranty Depends on local requirements. Please contact your national DASCOM sales office. Options and Accessories Universal Port, 3-Track Simultaneous Read MCR, barcode scanners, biometrics, RFID. AC Wall Adapter, 100 to 240 VAC Print and charge version o o Charge only version In-Vehicle Power Adapter, 12 to 24 VDC Shoulder Strap Data Cables; USB Spare Batteries in Multi-Packs Media in Case Quantities Popular Mounting Systems In-Vehicle Systems o o Cart Mounting Systems 18 www.dascom.com B. Appendix B DP-330L Printer Specifications Printing Specifications Printing Method: Direct thermal. Printing Resolution: 203 dpi (8 dots per mm). Printing Speed: Up to 4 ips. Printing Width: Up to 72 mm. Fonts/Characters/Bar Codes Fonts: Virtually all TrueType fonts, from 6 cpi to 34 cpi depending on emulation chosen, plus scaling. International Characters: Most common sets available. Unicode support. Bar Codes: Virtually all 1D and 2D codes supported, depending on emulation chosen. Downloadable firmware, fonts, graphics, and logos. Connectivity Standard (All Units): USB 2.0 PNP. Wireless Options:
Bluetooth Complete Bluetooth 4.0 Stack Dual Mode with EDR Antenna Gain: 0.5 dBi Universal Port: Data and power port allows connection of external devices such as MCR, barcode scanners, biometrics, RFID. Software Drivers and Utilities: Drivers for XP, WIN 7, WIN 8. Compatible with Windows CE/Pocket PC, Windows Mobile, Apple iOS, Android. Print utilities and SDKs for all platforms. Native App and Web printing. Printer Setup via internal web page, access with browser from any host
(tablets and smartphones included). Emulations: Emulates many popular printer brands and languages including:
Zebra CPCL and ZPL, Extech, IPL, and ESC POS. Firmware can be upgraded as new emulations become available. Supports direct printing of Postscript, PDF, PBM, JPG, PNG, BMP, SVG, &
TIFF files. Print Media Paper Type: Direct Thermal Roll. Roll Size: Maximum roll diameter 2.625
(66.7 mm), roll widths up to 3.125 (80 mm). Roll Capacity:
Label Media: Approx. 75 (23 m), creating 148 6 long receipts (with 5.5 mil thick media). Receipt Media: Approx. 173 (52.6m), creating 346 6 long receipts. Core Size: 0.75 Recommended (19 mm). Power Management Battery: Rechargeable 3 cell Lithium Ion, (11.1 V, 3000 mAh, 33.3 Wh). Endurance: Over 3,500 printed inches per charge. Power Option: 100-240 VAC wall adapter, or 12-24 VDC in-vehicle adapter. When plugged in, the printer can be used while recharging the battery or can be run without the battery
(print & charge adapter). Physical Specifications L x W x H: 6.1 x 4.6 x 2.7 (15.5 x 11.7 x 6.9 cm). Weight: 24 ounces (.68 kg) with battery. Environmental Specifications Operating Environment: -10 to 40C/
0% to 65% RH (non-condensing). Storage Temp: -25 to 65C) /
0% to 98% RH (non-condensing). Rated IP54 per IEC 529 Operator Controls and Indicators 3 LED indicators for general fault, power and battery status indication. Buttons for power and paper feed. Sensors for paper out, black mark detection, and door open. Gas gauge on battery door. Memory Capacity 4 MB Flash, 32 MB DDR2. Standard memory supports large and graphic intensive print jobs. Durability and Reliability Survives multiple 6 foot drops to concrete (each face) per IEC 68-2. MTBF: 10,000 hours in normal use. Regulatory Approvals FCC Class B, CE mark, RoHS, UL listed AC adapters, e-mark. Warranty Depends on local requirements. Please contact your national DASCOM sales office. Options and Accessories Universal Port, 3-Track Simultaneous Read MCR, barcode scanners, biometrics, RFID. AC Wall Adapter, 100 to 240 VAC Print and charge version o o Charge only version In-Vehicle Power Adapter, 12 to 24 VDC Shoulder Strap Data Cables; USB Spare Batteries in Multi-Packs Media in Case Quantities Popular Mounting Systems In-Vehicle Systems o o Cart Mounting Systems 19 www.dascom.com Glossary of Terms 802.11 Wireless networking communication standards created by IEEE. baud rate The rate at which characters are transmitted over a serial interface. This is also often referred to as bits per second. Bluetooth A definition for short range radio frequency communications. client Any node on a network that requests services from another node (server). character pitch The horizontal spacing of characters. Measured in cpi. cpi default DHCP dpi font Characters per inch. Value or configuration assumed when the printer is powered on or reset. Dynamic Host Configuration Protocol. A method used to centrally control the assignment of IP addresses on a network. Dots per inch. Generally used to refer to graphics density or resolution. A group of characters of a given shape or style. interface The connection between the printer and the host computer. IP LAN LED lpi Internet Protocol. A specification for packets, or datagrams, of data and an addressing method to allow the exchange of data with another system. Must be combined with another protocol such as TCP to create a complete connection with the other system. Local Area Network. Light emitting diode. Lines per inch. margin An area along any edge of a form where data may not be printed. Peer-to-Peer A network consisting of only stations (no access point or central server). Same as Ad-Hoc. reset server TCP 20 Initialization of various operating features of the printer to the value or state assumed when the printer is powered on. Any node on a network that provides services to another node (client). Transmission Control Protocol. A specification that controls the connection between systems on a network. www.dascom.com top of form USB WAN WEP The vertical position where the first line is printed on the paper. Also the position the paper is advanced to when a form feed (FF) character is received from the host or the Form Feed button is pressed on the printer's control panel. Universal Serial Bus. Wide Area Network. Refers to connections that allow one LAN to communicate with another LAN(s). Wired Equivalent Privacy. A security protocol for wireless LANs designed to provide data security similar to a wired LAN. WLAN Wireless Local Area Network. A LAN made up of wireless nodes. 21 www.dascom.com Index 802.11, 27 Add Enterprise Network, 9 Add Personal Network, 9 Address Method, 9 Ad-Hoc, 27 Alert, 6 Android, 3, 17 Android Tablets & Smart phones, 17 Apple, 3, 18 authentication, 27 Available Networks, 9 Backup Distance Before Printing, 12 battery, 3, 5, 7, 20, 21, 22, 23 Battery Care, 20 Battery Disposal, ii Battery Installation, 5 baud rate, 27 Bluetooth, ii, 2, 8, 9, 16, 17, 18, 27 Canadian Department of Communications Radio Interference Statement, i character pitch, 27 Charge Battery, 5 Charging the Battery, 20 Cleaning, 20 client, 27 Com Port, 16 Configuration, 7, 19, 27 Connectivity Parameters, 8 Contrast, 12 Control Panel, 6 CPCL, ii, 10 cpi, 27 Current Emulation, 10 Current Logo Mapping, 13 Current Printer Config, 9 default, 27 Default Font, 10 10 Default Text Line Spacing, Device Config, 11 DHCP, 27 discover name, 16, 18 Discoverablity, 9 dpi, 27 driver, 16 Drivers, 16 Fault Description and Resolution, 22 FCC Part 15 Class B, i features, 28 form, 28 Front Paper Sensor Threshold, 11 Gap Paper Sensor Threshold, 12 GateWay, 9 General Error Conditions, 22 Graphics, 13 IMAGE, 10 Image Parameters, 10 infrastructure, 27 interface, 27 IP Address, 9 IP54, 3 LAN, 27 LED, 27 Left Margin, 12 lpi, 27 Maintenance, 2, 20, 23, 24 margin, 27 Mark Seeking, 11, 12 Max Mark Search Distance, 12 Max Paper Speed, 11, 23 Maximum Battery Life, 20 Media, 2, 19, 25, 26 MT3, 10 Obtaining Service, 24 Paired Mode, 8 pairing code, 16 Paper Energy Values, 12 Paper Feed Button, 6 Paper Load, 4 passkey, 16, 18 PDF, 10 Peer-to-Peer, 27 PIN, 8, 9 POSTSCRIPT, 10 power, i, ii Power Button, 6 Power On, 5 Quick Start Instructions, 4 Rear Paper Sensor Threshold, 12 reset, 28 Role Policy, 8 Safety Information, 21 Security, 8 Self-Test, 6, 21 server, 28 Set index, 13 Set Width, 13 Specifications, 2, 3, 25, 26 SSID, 28 Stop Distance after Mark, 12 SubNetMask, 9 TCP, 28 Testing the Power Adapter and Battery, 21 Troubleshooting, 2, 20, 21, 22 Units, 11 Upload Digital Certificate, 9 Upload File, 13 USB, 16, 28 USB port, 2, 16 WAN, 28 web page, 7 WEP, 28 Windows, ii, 3, 15, 16, 17 WLAN, 28 22 www.dascom.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2017-08-31
|
||||
1 2 | Applicant's complete, legal business name |
Jiangmen Dascom Computer Peripherals Co.,Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0021247903
|
||||
1 2 | Physical Address |
No 399,Jin Xing Road,Jiang Hai District
|
||||
1 2 |
Jiangmen City Guang Dong Province, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
Z7O
|
||||
1 2 | Equipment Product Code |
DP3300
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Y****** H****
|
||||
1 2 | Title |
Manager
|
||||
1 2 | Telephone Number |
0750-********
|
||||
1 2 | Fax Number |
0750-********
|
||||
1 2 |
1******@qq.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | portable receipt and label printer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the maximum conducted output power. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EST Technology Co.,Ltd
|
||||
1 2 | Name |
I**** H********
|
||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 |
j******@163.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0005000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0004000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC