FCC ID: 2ARBP-ELST4316S LED TV

Celement DigitaLCD TV Please refer to the actual produc e Blement INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the manual for future reference.

(.) CONTENTS Additional Safety Information CO) |

Preparations ri What's Included Front View Rear View Wall Mounting Remote Contro onnecting External Devices Ns OO _ a!

TV SETUP urning On/Off Your TV Initial Setup Source _ =

oi ft

oo I

c VV Moms Ba > Bombs Bo i) C) C) c| QO]

=) N oO QO) ro Cc C) D>

n ot)

oO oT iad) QO) oO n Q ES 5 a Q| Oo

LO D IMPORTANT SAFETY INSTRUCTIONS Read these instructions All the safety and operating instructions should be read before this product is operated eep these instructions The safety and operating instructions shouldbe retained for future reference]

Heed all warnings All warnings o O O QO De agnered to ollow all instructions All operating IANO O OUIO_ D OllO O Do not use this apparatus near wate The appliance should not be used nea ater or moisture for example, in a we basement or near a swimming lS

o 5

Clean only with dry cloth o not block any ventilation openings instal Mpa ccordancemwithmthe a oD C O Do not install near any heat sources suc

, registers, stoves, o including amplifiers) tha Q wn

o a

vs O Q a

Coma

t Do not defeat the safety purpose o he polarized or grounding-type plug. A Og O sfc Of >|

aso cy Of Oo ro oI2 oho S|

n ider than the other. A grounding-type ug has two blades and a third i . If the it into your outlet onsult an electrician for replacement o C ODSOIeCtTE O C Protect the power cord from being walked Onmor pinched onvenience receptacles, and the poin here they exit from the apparatus pecified by the manufacturer. se only with the cart, stand, tripod anufacturer, or sold with the apparatus hen a cart is used, use caution whe oving the cart/apparatus combination to avoid injury from tip-over i= OO a3 OFOo

<DD>

aoe oO ays roy cfo O96 offs Oya OO oqo D>

oyoO co Oo Cc om]

n o

@O a nplug this apparatus during lightning torms or when unused for long period lof time) plug is damaged, liquid has been spilled Please keep the unit in a well-ventilated a onme WARNING: To reduce the risk of fire or electric}

exposed to dripping or splashing. Object fi ith liquids, such as vases should not b IARNING: The batteries shall not be exposed o excessive heat such as sunshine, fire or the

= i r 5 disconnect device, the disconnect device sha emain readily operable WARNING O reduce the of ele |

hock, do not remove cover are no user-serviceable parts inside. Refer ervicing to qualified personnel CAUTION RISK OF ELECTRIC SHOCK PAV Roey Risque DE CHoc ELECTRIQUE NE PAS OUVRIR DO NOT OPEN the presence of non-insulated dangerous voltage Within the products enclosure that may be o sufficient magnitude to constitute a risk of electric equilateral triangle is intended to alert the user to the presence o he literature accompanying the appliance.

[Oo] This equipment is a Class II or double insulated electrical appliance. |

has been designed in such a way hat it does not require a safety connection to electri Multimedia Interface, and the HDMI Logo are rademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and oth ountri ADDITIONAL SAFETY INFORMATION o ensure reliable and safe operation of this equipment, please read carefully all the nstructions in this user guide, especiall lectrical Safety e TV set should only be connected to a main power supply with voltage that atches the label at the rear of the product oO prevent overload, do not share the same power supply socket with too many other electronic components Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on them, which may damage the leads old the main plug, not the wires, when removing from a socket a thunderstorm, or when not using the television for extended period of time urn off the power switch on the back of the television Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet oist areas, such as bathrooms, steamy kitchens or near swimming pools s damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture f anything accidentally penetrates the ventilation slots or if the set does not work D Do not break open or throw exhausted batteries on a fire Do not mix old and new batteries]

Do not mix Alkaline,Standard (Carbon-Zinc) or Rechargeable Nickel Cadmium) or

(Nickel Metal Hydride) batteries Physical Safety o not block ventilation slots in the back cover. You may place the IV in a cabinet ut ensure at least 5cm (2") clearance all around o not tap or shake the IV screen, or you may damage the internal circuits. Take ood care of the remote control o clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids o not Install near any heat sources such as radiators, heat registers, stoves or other Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two CO i eplacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs efer all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug |

damaged, liquid has been spilled, or objects have fallen into the apparatus, has bee exposed to rain or moisture, does not operate normally, or has been dropped Please always connect your television to a power outlet with protective groud a CO O EPARATI Blement TV Set e element Digital LED TV Please refer to the actual product element INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the manual for

@ a oi a CT hig Se |

@ element SMART TV Prot ckly by pre-registering your News & Offers - Take advan nd

+ Safety & Satisfaction notificatio Have questiot produc rs from E ai y up: tant product updat elementelectronics.com es and

(.) PREPARATIONS Press to select among different input signal sources e MENU Display the OSD (on screen display) menu e CH -/+

ra O ala 2 2 2 VOL -/+

= 1) e D light indicates when the IV Is activated e TR PREPARATIONS AY, 60 eadphone Outpu (9) Antenna Input(75O VHF/UHF}

mh Va\

nu RJ-45) NS IN| YPBPR/CVBS Bato imple precautions such as sing cabinets or stands recommended by the manufacturer of the television set SagOnly using furniture that can safely support the television set aN Ot placing the television set on tall furniture(for example, cupboards or bookcases) ithout anchoring both the furniture and the television set to a suitable support faNot placing the television set on cloth or other materials that may be located betwee he television set and supporting furniture ducating children about the dangers of climbing on furniture to reach the televisio our existing television set is being retained and relocated,the same considerations as above OuIO De appiled vr: ) ani new TV is heavy, please consult with professional way Ns A installer to perform this installation. ,

6

(_) PREPARATIONS

"Remote Control 1. POWER: [urn the LV_on and off]

ENTER button to confirm]

3. Digital Buttons(0-9, -):

with digital buttons. 4. > : Switch to the previous program

. YouTube: If network connects, press this ke to view YouTube directly. NETFLIX: If network connects, press this key|

to view NETFLIX directly. 2. Arrow buttons AV <4> : Use to select on-screen menu items and change men u values _ Back: Return. Color buttons: It's used as it's showed in the EPG or Program Edit menu. MUTE: Press this button to cut off the sound o the TV set temporarily, press again to resume. adjust TTS on or off. VOL +#: Press these buttons to adjust the

. CHA/V: Press these buttons to change channel upward or downward. ayer controlbutton:

Include play/pause, stop, previous, next, backward, forward is used in USB mode . Please refer to relevnat instructions in the section of multimed player. 1. INFO: Display the program information 2. MTS/Audio: In USB mode, press thi I) O O AUOIO tia C OVIE 5. CC: Press this button to adjust CC mode el onnecting External Devices ra

) if Ce) AUDIO OUT SEE TaD, g rh UJ 3}

, Headphone a ; Network Cable asl EEE Digital Audio System ; ; ;

NK J X J FL . Caw O NA TT Fatal Cy f DIGITAL HDMI CABLE rH)

tL) cya HDA _ Blu-ray Player / Recorder CeCSCSCSCi(

oS ee HDMI Device Match colored connectors to colored port:

On Da Qe O eC 8

( JINITIAL SETUP

urning On/Off Your onnect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate!

In Standby Mode, press the @ button on the main unit or on the remote control to turn the TV on!

(i) The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket. onnect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LET) indicator will illuminate]

In Standby Mode, press the @) button on the main unit or on the remote control to turn the TV on. [he red LED indicator will turn blue:

The first time you turn the TV on, it will go into the Setup Wizard. Press </

A/V buttons to select your desired mode and press ENTER confirm. O3 OSD language Oy Orolo Oe) fe PMY = UNOMeelareLUele(oe Select the country. Steen oS Espafiol Mexico French Tele) 1 =i) ceetet =i sect eRe eT a DATA COLLECTION AND FIRMWARE UPDATES NOTICE When this television is connected to the internet, it will collect limited, non-personally identifiable information which will be sent to MStar Semiconductor Inc. (MStar) and its service providers. Certain of this information may be aggregated and shared with third party partners for business and product analysis purposes only. By clicking Accept you acknowledge and agree to the collection and sharing of this information as described in more detail in the View Additional Details section, as well as the automatic download of essential firmware/software updates. Please note if this Notice is translated in a language other than English, version in English language shall always prevail as the sole basis for the interpretation of the terms oo] TCHR EW ADDITIONAL DETAILS) - [ACCEPT]

(_) CUSTOMIZING TV SETTINGS a Ter ra DATA COLLECTION AND FIRMWARE UPDATES NOTICE VIEW ADDITIONAL DETAILS When this television is connected to the internet, it will collect limited, non-personally identifiable information which will be sent to MStar Semiconductor Inc. (MStar) and its service providers. Certain of this information may be aggregated and shared with third party partners for business and product analysis purposes only. By clicking Accept you acknowledge and EU CM OM UT Mee re COUT RSIE ULM USM OMEN OME CMY ested ol-le Mel-l(e) AOR TALIM ULE TOME Uomo) ier Kolm easel]

firmware/software updates. The information that will be collected and sent to MStar consists of: confirmation of initial television start up (year/month only) and country/region of launch, device information that indicates television manufacturer, model, and serial number, number and launch of streaming service within a calendar month (Usage Information). This Usage Information will be collected and stored by MStar and its service providers. Where MStar shares information with third party partners, it will do eneesae ie

[] ACCEPT AUTOMATIC UPDATES io} Clock Select to set the clock.

[] ACCEPT USAGE INFORMATION COLLECTION aN <0R ane 7h oO

{op Home or Store Select where you will use the TV. Lala

{0} Time Zone Pt-li- le nom CCW Aen om Manual Store Central Eastern Ls oer eee ce sleet Pc aed a rR >

oS) iS a

{0} pst Select Daylight saving time. 1} Network Configuration Do you want to set Network?

Os Network Select network scan type. ital cE On Skip NN

[ENTER] Select =o MeO [ENTER] Select (BAG Retum |= \ii= MSoeeed =o Moa ron "oO. nn

. D Cg Auto Search Do you want to scan the channels?

a(t Ship re Select a \er@ RU) q iD 1d

( JINITIAL SETUP ae Use </key to select a input source and press ENTER key to confirm]

Ha} ebLmsyel cers) AY AY YPBPR HDMI1 HDMI2 USB >

nei Stain Channels Selectio There are four ways to select channel!

1) Using number keys, and ENTER keys on the remote contro to select channel directly. To select channel 90, press @) = @ +=}

When you use the number buttons, you can directly select channels that were eithe erased or not memorized]

all the channels that the [TV has memorized]

YO O Ce o C q Cie Cl O O C O ed]

(INITIAL SETUP 3) PressC. key to return to previous channel, press it again to return to current channel oO quickly switch between two channels that are far apart, tune to one channel, then use the number keys to select the second channel. Then use the Hr) button to quickly alternate between them. Py) is not activated if no channel has been changed after TV turning on. Select channels from "Channels List" or "Favorite List". Press List key to choose from "Channel List" menu adjust the volume of TV between 0 to 100 by using VOL+/- key

@ To increase the volume, press VOL+ key

@ Io decrease the volume, press VOL- key

.) oe ft. The MUTE icon will appear in the lower-right oO resume sound, press the Mute button again, or simply press the VOL+ ke urren anne inrorma ion |

Press INFO key on the remote control to view current channel information, the indications of channel information are listed in the following table Seon 01/ 012005 08:40 480i Movin icture 480i 4:3 ee nO: iO Press EXIT key on the remote control to exit this OSD

(.)TV SETUP Picture 4 1. Press MENU key to display the main menu on the screen

.Press A/W key to select "Picture" option. so 3. Press or ENTER key to enter "Picture" submenu. TTT Function Your TV has four picture settings ( Sports, Normal, Soft, User ome that are preset at the factory. Only "User" mode can be in set to your preference by adjusting particular items such as =

Contrast, Brightness, Color, Sharpness, Tint. 1. Press A/V key to select "Picture Mode" option. NCU 2. Press Por "ENTER" key to enter submenu. 3. Press &/W key to select one picture mode. 4. You can also press the P.Mode key on the remote control to select one of the picture settings Jser settings for UR er

. Ictu

(Contrast, Brightness, Color, Sharpness, Tint) our set has several settings which allow you to control picture ee RN quality. :

. Brightness it}

1. Press A/V key to select a particular item. 2 2. Press </P key to decrease or increase the value of a particular lle sl ite SESS 50 values are stored ,

. Tint i}

particular item. SET 100 Contrast: Adjusts the lightness and darkness between objects and the background. bere LCC Brightness: Adjusts the brightness of the picture. Color: Adjusts the colors, making them lighter or darker. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Tint: Adjusts the Tint of the picture. ou can change the brightness of the entire screen according to your preference!

il. Press A/W key to select Backlight option!

. Press </ key to increase or decrease the backlight value Backlight: Adjusts the brightness of the whole screen. olor Temperature ou can change the color of the entire screen according to your preference,

. Press or "ENTER" key to enter submenu

. Press </P key to select one Color | emperature Cool: Makes whites bluish. Standard: Makes whites nature. Warm: Makes whites reddish.

(TV SETUP co) hale ag 1. Press MENU key to display the main menu on the screen. Press A/ key to select "Sound" option. Sound Mode 3. Press or ENTER key to enter "Sound" submenu EEE tH AVL

'You can select the type of the special sound effect Sen to be used when watching a given broadcast. NRC east Your TV has five sound settings (Standard, Music, Movie Sports, User) that are preset at the factory. 1. Press A/ key to select "Sound Mode" option. 2. Press > or "ENTER" key to enter submenu. 3. Press </> key to select one sound mode. a ra 4. You can also press the S.Mode key on the remote Digital Audio Output Audio Languages Dolby Audio Process Standard: Selects the normal sound mode. Music: Provides clear and live sound for music. Movie: Provides live and full sound for movies. Sports: Emphasizes bass over other sounds. User: Selects your custom sound settings. the volumes of the left speaker and the right speaker are not the same, you can adjust he "Balance" to suit your personal preference. 1. Press A/ key to select "Balance" option Press </ key to decrease or increase the value of the item AVL acn broadcasting station has its own signal conditions, and it is inconvenient to adjust the olume every time the channel is changed. AVL automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by|

raising the sound output whenthe modulation signal is low 1. Press &/ key to select AVL option, press ENTER/ key to enter submenu. Press A/V key to select On or Off.

Surround sound his is used to turn on surround sound to gain better sound effect!

1. Press A/ key to select "Surround Sound option, press ENTER/ key to enter submenu

. Press A/ key to select Surround or Off?

Sf Video Descriptio 1. Press A/ key to select "Video Description option, press ENTER/ key to enter submenu

. Press A/V key to select On or Off.

(_.) TV SETUP Bite Aud U is Is used to set digital audio output, udio Languages You can set the primary and secondary language for audio pred NUM Kole ty) Dolby Audio Process (ii This is used to set Dolby Audio Process. baad lly 1. Press A/V key to select "Dolby Audio Process option. Surround Virtualizer a 2. Press ENTER/ key to enter Dolby Audio Process FL aE High Auto Volume Control Off

. Press MENU key to display the main menu on the screen. 2. Press A/ key to select Function option. Noise Reduction 3. Press ENTER/ key to enter Function submenu MPEG Noise Reduction PNY oT -Tel atl) Press A/ key to select the Noise Reduction mode. Link Setup Press ENTER/ key to enter submenu. RT eT Press A/ key to select the NenDAEan mode: off/low/middle/high/Auto. ite a@ eet Co MPEG Noise Reduction arial Press 4/ key to select MPEG Noise Reduction option Press ENTER/ key to enter submenu. fo Press A/ key to select the mode: off/low/middle/high. | |

The picture will be better when it is in high mode. ASD KX O Press A/ key to select Aspect Ratio option. Press ENTER/ key to enter submenu Press A/ key to change the size of the picture on the size of the picture on the screen]

Select the aspect ratio settings: 4:3/16:9/Movie/Subtitle/Native/Panorama|

(TV SETUP Link Setup 1.Press A/V key to select Link Setup option. 2. Press ENTER or > key to enter Link Setup submenu]

Enable Link: Press </ to turn on/off the link setup. Auto Power On: When this option is On and the TV is in standby mode. To turn on the DVD can also turn the TV at the same time. Auto Standby: When this Option is On and the TV is on, to turn off TV can also turn the DVD into standby mode. s S 1. Press &/ key to select Netflix Deactivate" option

. Press ENTER or key to confirm 3. Press "Yes" to confirm again, the Netflix will be activated, NC x \

Display the Netflix Esn information Display the Netflix version Vudu Deactivate 1. Press A/" key to select Vudu Deactivate" option!

. Press P or "ENTER" key to confirm. Enapie NK +#WYN Auto Power On Off

(.) TV SETUP ats) 1. Press MENU key to display the main menu on the screen]

2. Press &/ key to select "Time" option. Press ENTER/P key to enter "Time" submenu. kc oy mits In "Off Time item, press button or ENTER butto ST ag o enter the submenu, set the day & time to turn off Auto Sle J) In "On Time item, press button or ENTER button o enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You ican also choose which day to control you TV set in a week Sleep Timer, 1. Press A/ key to select "Sleep Timer" option,press or ENTER button to enter the submenu]

otes: When the time is less than 60 seconds, remind information will be displayed on he screen. Press any key button to cancel timer function Auto Sleep) Press A/V key to select whether to open the Nosignal Power off features. If this function is opened, the IV will power off in ten minutes when there Is no signa Time Zone 1. Press A/ key to select "Time Zone" option,press or ENTER button 2. Press A/ key to select time zone]

() TV SETUP 7 a]

Oy el ifela 4 iN 1. Press MENU key to display the main menu on the screen. 2. Press A/V key to select "Option" option. Press key to enter Option" submenu. OSD Language OSD Language 1. Press A/V key to select OSD Language" option. 2. Press ENTER or key to select a proper language for OSD OSD Time Closed Caption ntl Set the preferred amount of time for the OSD to be displayed Network Configuration on the screen. Software Upadate (USB) losed Caption Ti) 1. Press A/W key to select Closed Caption" option. Nsom aeons

. Press ENTER key to open CC submenu. Mame rer Tecx esa Network Update Information Reset User Mode 1.Press A/" key to select "Reset" option. Press " or "ENTER" key to confirm. Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factor setting. etwork configuration Please refer to "Network setting Software Update(USB) When the TV need to be updated, please copy the new software to a USB storage and inset the USB storage to TV, then operating by following steps. 1.Press A/W" key to select "Software Update(USB) option. 2.Press P or "ENTER" key to confirm. 3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off automaticly when updating is finish. 1.Press A/W" key to select "View End-User License option]

.Press P or "ENTER" key to confirm. nternet Update Check 1.Press A/" key to select "Internet Update Check" option!

.Press or "ENTER" key to confirm. etwork Update Information

. " key to select "NetworkUpdate Information" option

.Press or "ENTER" key to confirm. 1.Press A/" key to select "User Mode" option

-Press P or "ENTER" key to confirm.

()TV SETUP Roya The "Lock" feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions ca be set up or changed|

1. Press A/V key to select "Lock" option. Press ENTER or key to enter "Lock" submenu, "Enter Password" menu ill appear,enter your 4-digit password to enter "Lock" submenu (the defaulf password Is OOOO, and the universal password is 1980)

. Press > or "ENTER" key to confirm. 3. Press A/W key to select "On" or "Off". 1. Press A/V key to select "Set Password" option. 2. Enter your 4-digit password to enter enter "Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skipped to Confirm Password item, re-enter the same 4 digits, and your new password has been memorized. hen the programs is locked, you can also press the menu key, Info key and so on. Then you can press </P key to call back the input-password window. USA TV 1. Press A/V key to select "USA TV " option. Press ENTER or key to open USA TV menu. USA MPAA 1. Press A/ key to select "USA MPAA" option. Press ENTER or key to open USA MPAA menu!

Canada Englis

. Press A/ key to select "Canada French " option. Press ENTER or key to open Canada French menu RRT Setting

. key to select "RRT Setting " option. Press ENTER or & key to open RRT Setting 1. Press A/W key to select "RRT Reset option. Press ENTER or key to open RRT Reset menu 1. Press A/V key to select "Block Unrated TV" option. Press ENTER or key to open Block Unrated TV menu Please Enter Password Lock System Set Password STA USA MPAA Canada English eer w a clea RRT Setting NASM Ceiclt efoto mei eciccie im AY

(_)PARENTAL CONTROL Ne otion Picture Association of America (MPAA) Rating System Grade Meaning General Audiences Content not offensive to most viewers. Parental Guidance Content is such that parents may not want Suggested their children to view the program. Program is inappropriate for pre-teens, with a greater degree of offensive material suggested than a PG rated program. Parents Strongly Cautioned

; Not for children under 17, strong element of Restricted ;

sex and/or violence. No children under Not for children under 17 under any NC-17 . age 17 circumstances. Strong sexual content. X Hard Core Films Same as NC-17 rating. No Rating No Rating MPAA Not Rated V Parental Guideline Rating ste Grade Meaning TV-Y All Children Content not offensive to most viewers. Directed to Older Considered suitable for children over 7, may TV-Y7 ; ; ;

Children contain fantasy violence scenes. IV-G General Audience Considered suitable for all audience; children may watch unattended.

; Suggested unsuitable for younger children, Parental Guidance . TV-PG may contain suggestive language, bad Suggested language, sex and violence scenes. Unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes. Mature Audience Adults only, may contain strong language, bad TV-MA ;

Only language, sex and violence scenes. TV-NONE. | All the people Parents Strongly TW-14 Cautioned Canadian Rating:

Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+) Canadian French is used in Quebec (G,8 anst+, 13 anst+,16 ans+, 18 anst+). The V-Chip will automatically block certain categories that are TT restrictive. If you block TV-Y category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories in the

"young adult" will be blocked (TV-G, TV-PG, TV-14, and TV-MA). y 3.0)

(_) TROUBLESHOOTING our TV does not operate normally or cannot be turned on, please chec he following troubleshooting questions. Remember also to check any othe connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support

(Refer to Warranty page). SYMPTOM POSSIBLE CAUSE REMEDY

. Check all connections to the Dead. No LED lit No power to the TV. TV's AC socket.

* Press either the Power button Dead. No LED lit white | Set in standby mode. or the Standby button on the remote control.

* Press the SOURCE button to Blue screen Incorrect source selected. select the correct source. hostin * If using an indoor antenna, try g 91 Poor antenna signal. adjusting the antenna position. Check antenna connections. Sound "Mute". * Turn sound "Mute" off. Volume set too low. * Check volume settings. No sound External leads * Check that all external leads not connected "if used". are connected properly. Select the SET Password setting in the LOCK menu, then enter the following master password 0000. The master password clears your previous password and allows you to enter a new password. Noisy, snowy, picture (TV) Lost password

(_) TROUBLESHOOTING Before contacting the service technician, erform the following any problem still persists, unplug the LED TV and call for assistance!

PROBLEM POSSIBLE SOLUTIONS No sound and picture Check that the main plug has been connected to a wall outlet. Check that you have pressed the POWER on the front of the TV set. Check the picture contrast and the brightness setting. White LED indicator lights

* Set in standby mode. Press either the Power button or the Standby button on the remote control. Normal picture but no sound Check the volume. Sound muted? Press the MUTE button. Try another channel, the problem may be with the broadcast. Are the audio cables installed properly?

The remote control does not work Check to see if there are any objects between the TV and remote control causing obstruction.

* Are batteries installed with correct polarity (+/-)?

Correct remote operating mode set: TV, VCR, etc?

Install new batteries. Power suddenly turns off Is the sleep timer set?

Check the power connection, power may be interrupted. No broadcast on the station tuned. Picture appears slowly after switching on This is normal, the image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes. Poor color or picture Adjust the color in Menu option. Keep a sufficient distance between the product and the VCR. Try another channel, the problem may be with the broadcast. Are the VIDEO cables installed properly?

Activate any function to restore the brightness of the picture. Horizontal/vertical bars or picture shaking Check for local interference, such as an electrical appliance or power tool. Blue screen Press the SOURCE button to select correct source. Poor reception on some channels Station or cable experiencing problems. Tune to another station. Station signal is weak, reorient antenna for better reception. Check for sources of possible interference. Lines or streaks in pictures Check the antenna (change the direction of the antenna). No output from one of the speakers Adjust balance in the Menu option.

(_) TROUBLESHOOTING ote: When there Is a problem in VGA mode (only when VGA mode Is applied), PROBLEM POSSIBLE SOLUTIONS Adjust resolution, horizontal or vertical frequency. Check whether the signal cable is connected or The signal is out of range loose. Check the input source. Vertical bar or strip on the Set the auto configure or adjust clock, phase, or background, horizontal noise H/V position. and incorrect position Screen color is unstable or is a Check the signal cable. single color * Reinstall the PC video card. Mainte arly malfunction can be prevented. Careful and regular cleaning can extend he amount of time you will have with your new TV. Be sure to turn the power off nd unplug the power cord before you begin any cleaning Do not use your IV in areas that are too hot or too cold, because the cabine may warp or the screen may malfunction. Your TV works best in temperature hat are comfortable to you torage temperatures are 32 to 122F(0 to 50C),

"F(O to 35C)]

Do not place your IV in direct sunlight or near a heat source!

minimum 5cm distances around the apparatus for sufficient ventilation the ventilation should not be impeded by covering the ventilation openings with tems, sucn as newspapers, table-ciotns, curtains, etc. no naked flame sources, such as lighted candles, should be placed on the pparatus}

attention should be drawn to the environmental aspects of battery disposal;

Oo Ss a]

DS Oo

3 ro

@O

o

Cc

n

oo NO

oO oO oF Ti A great tip to dust off your screen: wet a soft cloth in a mixture of lukewar water and a little fabric softener or dish washing detergent. Wring the cloth unt it's almost dry, and then use to wipe the screen Viake sure the excess water Is off the screen, then let air-dry before you turn o the | V]

eaning the cabinet

( )FCC NOTES

(1)

(2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment:

This equipment should be installed and operated with minimum distance 20cm between the radiator &

Please send all correspondence to Element TV Company, LP. Customer Service customerservice@elementelectronics.com www. clementele SPECIFICATIONS Panel Size Display Type Panel Technology Panel60HzVs.120Hz Display Resolution HDMI & Component Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Brightness(Centre Typ.)Cd/M?

ResponseTime(G To G) LampLife(Typ.Hours) HorizontalViewing Angle(AtCR>20) VerticalViewing Angle(AtCR>20) 178 TV System ATSC/QAM Channel Range Air CH2~CH69 / Cable CH1~CH135 42.5 inches diagonally 1920x1080 Up to 1080P 1920x1080 220-250

>30000 hours 178 olnlals 2\al5 3 | m/S/ wy} }O n =

(_) OTT APP SERVICE OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. YouTube YouTube You can browse the following website for more help:

https://productforums.google.com/forum/#!categories/youtube/smart-tvs VUDU ed Al E18 You can call the following telephone for more help: 888-554-8838 Pandora You can send E-mail to Pandora for more help: pandora-support@pandora.com AccuWeather You can send E-mail to AccuWeather for more help: CustomerService@AccuWeather.com ew) WARRANTY LEMENT LCD TV LIMITED WARRANTY TO ORIGINAL CONSUMER CD TV 42 inches and above Screen Size Models i includes in-home BJ IMING AND PROCEDUREmBefore Warranty service can commence, the origina purchase of the Product. You can also visit us online at www.elementelectronics.com 2 | EXCLUSIONS AND LIIVITATIONS TO WARRANTY SERVICE is Warranty covers manufacturing defects in materials and workmanship encountered |

on-commercial use of the Product, and does not cover (a) damage or failure caused by or attributable o Product abuse or misuse, failure to follow instructions, improper installation or maintenance Iteration, accident, or excess voltage or current; (b) improper or incorrectly performed repairs by non-

authorized service facilities; (c) onsite customer instruction or adjustments; (d) transportation, shipping e) costs of product removal, transportation o

@ WARRANTY einstallation costs; (f) ordinary wear and tear, cosmetic damage or damage due to acts of nature but not limited to water, floods, wind, tornado, earthquake or fire, or due to damage caused part of the Product. In addition, thi

. y|

of Element. The addition of equipment or features to the Product that are not manufactured or ecommended by Element could affect the intended function of the Product, and therefore may void PLEASE DIRECT ALL CORRESPONDENCE TQ}

VV V 5 A wall mount kit (purchased separately) would allow you to mount your TV on the wall. For detailed information o installing the wall mount, refer to the instruction provided by the wall mount manufacturer, It is strongly recommended to ontact a technician for porfessional assistance for wall mount installation, not responsible for any damage to the}

Do not mount the TV at more than a15 degree tilt]

Do not install your wall mount kit while your TV Is turned on,it may result In personal injury due to electric shock |

Viontage mura n kitde montage mural (achete separement) vous permettra de fixer votre televiseur au mur. Pour des informations responsable des dommages au produit ou des blessures a vous-mme ou a d'autres personnes. -montage Ce televiseur est compatible avec un motif de trous de montage de 200 mm * 200 mm Quatre vis de type M6 * 10 (ISO metrique) sont ncessaires pour installer le support mural sur votre televiseur]

utilisez pas de vis d'une longueur superieure a 10 mm. Les vis trop longues peuvent endommager l'interieur d e montez pas le televiseur a plus de 15 degres d'inclinaison oujours utiliser deux personnes pour monter le televiseur au mur. Ninstallez pas votre kit de montage mural lorsque votre televiseur est allume, cela pourrait entrainer des blessures|

e serrez pas les vis trop fort pour ne pas endommager le tleviseur et ne pas faire tomber le telviseur:

orporelles en raison d'un choc electrique:

Pour viter toute blessure / dommage caus par une installation incorrecte, le mur doit tre install uni personnel qualifie}

3.8 his product contains electrical or electronic materials. The presence of these materials may, ot disposed of properly, have potential adverse effects on the environment and human health Presence of this label on the product means it should not be disposed of as unsorted waste land must be collected separately. As a consumer, you are responsible for ensuring that thi product is disposed of proper!

66 mm Model: ELST4316S Input Power: AC 120V ~ 60Hz,75W 5003402

. 50 mm WARNING:Cancer and Reproductive Harm-

www.P65Warnings.ca.gov Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2ARBP-ELST4316S 4.5 B07.2254300270-1 element 43 2019-10-12 Re.05,

DATE:2019-10-24 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, | appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-

128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Jiangsu Dafeng Harson's Electronics Co., Ltd and Shugang Road and Yanchang Road Interchange Dafeng, YANCHENG CITY Jiangsu Province 224145, China Signature:

Name: Qing Li (3) in Ly Title: QA Manager Company: Jiangsu Dafeng Harson's Electronics Co., Ltd

Jiangsu Dafeng Harson's Electronics Co., Ltd DATE : 2019-10-24 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ARBP-ELST4316S Product Name: LED TV Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: ,

(List here the documents for which you are seeking confidentiality for example ...) e Schematics e Block diagram

' @ Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature:

Name: Qing Li (Qin Ll Title: QA Manager Company: Jiangsu Dafeng Harson's Electronics Co., Ltd