FCC ID: 2BE3G-H1DELUXE Head massager

H1 H1 Head Massager Mini Size Light Weight App Control 1 APP Product Configuration Silicone Massage Point ON /OFF Button Battery Compartment Display Screen Charging Port Product Parameter Product Name: Head Massager Model:

H1-Deluxe Rated Input Power: 3.5W Rated Charging Voltage:

5V Battery Capacity:

700mAh Smart Timer: 15 Minutes Jiangsu Mingteng Medical Equipment Co., Ltd Executive Standard:

GB4706.1-2005 GB4706.10-20 08 2 FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:

1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Jiangsu Sintang Health & Technology Co., Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name: Jiangsu Sintang Health & Technology Co., Ltd Address: 10. Jinfeng Road, Dafeng District, Yancheng City, Jiangsu China Product Name: Head massager FCC ID: 2BE3G-H1DELUXE Model(s): Head Massager, H1-Deluxe 2.911(d)(5)(i) Equipment Type We, [Jiangsu Sintang Health & Technology Co., Ltd] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

Clare wen Date: 2024-03-20 Title and Company name: Manager NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Jiangsu Sintang Health & Technology Co., Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Jiangsu Sintang Health & Technology Co., Ltd Address: 10. Jinfeng Road, Dafeng District, Yancheng City, Jiangsu China Product Name: Head massager FCC ID: 2BE3G-H1DELUXE Model(s): Head Massager, H1-Deluxe 2.911(d)(5)(ii) Applicant filing We, [Jiangsu Sintang Health & Technology Co., Ltd ] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:

Clare wen Date: 2024-03-20 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Shanghai Sintang Industrial Co.,Ltd Section 2.911(d)(7) USA Agent for Service of Process Company name: Jiangsu Sintang Health & Technology Co., Ltd Address: 10. Jinfeng Road, Dafeng District, Yancheng City, Jiangsu China Product Name: Head massager FCC ID: 2BE3G-H1DELUXE Model(s): Head Massager, H1-Deluxe 2.911(d)(7) USA Designated Agent for Service of Process We, [ Jiangsu Sintang Health & Technology Co., Ltd ] (the applicant) designate [ Stone Trading Limited ] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: Stone Trading Limited Company name: Jiangsu Sintang Health & Technology Co., Address: 6547 N Academy Blvd #2266,Colorado Springs,CO Ltd 80918,United States Address: 10. Jinfeng Road, Dafeng District, Yancheng City, FRN: 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email:compliance@c-shlink.com Signature:

Title: Manager Date: 2024.3.20 Jiangsu China FRN: 0034955211 FCC Grantee Code:

2BE3G Contact Name: Clare wen Telephone No: +86-13662631075 Email:

clarewen@gvt-lab.com Signature:

Title: Manager Date: 2024.3.20 2.911 (d)(7)USA Agent v1.2 Shanghai Sintang Industrial Co.,Ltd NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the

-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Jiangsu Sintang Health & Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-03-20 Subject; Request for Long Term Confidentiality FCC ID: 2BE3G-H1DELUXE To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Clare wen Title: Manager

Letter of Authorization Jiangsu Sintang Health & Technology Co., Ltd Company:

Address: 10. Jinfeng Road, Dafeng District, Yancheng City, Jiangsu China Product Name: Head massager Model Number: Head Massager, H1-Deluxe FCC Identifier: 2BE3G-H1DELUXE We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Clare wen Date: 2024-03-20 Title: Manager

Differences Declaration To whom concern, We company Jiangsu Sintang Health & Technology Co., Ltd Here by declares:

The product model H1-Deluxe is identical in the PCB layout, electronic schematic and antenna with Head Massager, only different in model names. Sincerely yours, Name (in print): Clare wen Company name: Jiangsu Sintang Health & Technology Co., Ltd Company address: 10. Jinfeng Road, Dafeng District, Yancheng City, Jiangsu China Tel: +86-13662631075