JME-8265R Users Guide 2.4GHz Wireless Keyboard 1 the mutual recognition of R & TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal equipment and their conformity (R & TTE). Federal Communications Commission Radio(FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including that may cause undesired operation. interference Caution:
*Risk of explosion if battery is replaced by an incorrect type.
*Dispose of used batteries according to the instructions.
*Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 Feature 2 Transmission modeRF Frequency2410~2473MHz
RFchannel quantity64
Center of Channel:
2410/2411/2472/2473MHz
Bandwidth of Channel: 1MHz
Data Send timing: <500us
Power2 AAA batteries
Modulate modeGFSK
Effective distance12m
Quantity of connection ID24Bits (8,388,608 ID can be used)
Number of keys99 keys
Low battery indicating voltage:2.2V@5%
2 System Requirements
Microsoft Windows 98/ME/2000/XP/Vista or later version
An available USB port 3 3 Installation & Use
Plug the USB receiver into a computers USB port:
Windows 98 SE/ME The system finds new device and prompts you to insert the operating system CD-ROM. Follow the instructions on the screen to install the required drivers. Windows 2000/XP/Vista The operating system identifies the receiver as a USB Human Interface Device and begins installation automatically. When completed, the system will prompt that This device is ready to use!
Open the battery cover in the back 4 into
Put the batteries the batteries casket according to the polarity markings inside the battery casket, lock the cover.
For the first time of usage, you need to bind the keyboard to the receiver as below:
With the keyboard close to the receiver within 50cm, press the binding button on bottom of the keyboard the receivers led blinks 4 times, the keyboard is ready to be use. for about 6 seconds, when 5
In normal use, the led on the receiver blinks according to the wireless keyboards operation, if the keyboard and mouse are not in operation, the led is off.
Keyboard LED function Num Lock Cap Lock Power----This LED is on when the keyboard is active. When the keyboard enter sleep mode or it lost connection to the receiver, the LED will be off. Low Battery----This LED will be lit if the battery power is low, you should replace the battery right now. Fn--Function Key Characters in blue are accessed through the Fn key which works like a shift key, to activate these
6 function, please hold-down Fn key before press these keys.