VitalASC VisPad Stylus Pad User Manual Electronic tablet 730 VitalASC VisPad Stylus Pad :
A B C D E F A Micro USB Power Port B Indicator LED C On/Off Switch D Connecting Button/LED E Pen Slot F Stylus Area G Erase Button H Right Button I Pen Tip G H I V1.0 Package included VisPad Stylus Pad VisPad Stylus Pen Micro USB Charger Cable RF 2.4G Dongle User Manual Adaptive Operation System Windows (10X is recommended), iMac Wireless Connecting 2.4GHz RF Continuous Use : 12 Hours Standby : 360 Days Max. Available time Charging time The Function of Related Parts:
A Micro USB Power Port USB +5V / 1 Hours Use the Micro USB Cable to Charge.(*1) B Indicator LED
(1) Blue Means Power on.
(2) Red Means Power is Charging. Go out When Power is full.
(3) Flash Red Means Need to be recharged. Left Turn off the Power. Right Turn on the Power. Begin to Search for Connecting C On/Off Switch D Connecting Button / LED Push to Connect with the Dongle when the First Time Using.(*2) Flash Blue Means 2.4GHz RF is Searching for Connecting. Go out When Connected.(*3) E Pen Slot Keep the VisPad Stylus Pen here. It Attracts the Pen to remain in Both Directions. F Stylus Area G Erase Button Active Area that the VisPad Stylus Pen Works. Erase the Marks Been Written on APP or Applications of PC. Push this Button before the Pad Detects the VisPad Stylus Pen(*4) Use As the Right Button of the Mouse. Plastic Material and can be Exchanged with Another New Pen Tip H Right Button H Pen Tip When the Stylus Pen is Detected, it will Show a Cursor on the Display Screen.
*1 : This Port is for Charging Only, It can not Transfer the Stylus Data to Computer.
*2 : Be Sure to Connect the Dongle to the USB Port of the Computer in Advance.
*3 : This Pad will Remember the Last Dongle Which has been Connected.
*4 : The VisPad will Detect the Stylus Pen upon the Mylar about 6mm Height.
*5 This product is connected to the computer through 2.4G wireless and can draw pictures, normal use Usually placed next to the computer and belongs to the mobile device V1.0 Customer Service This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2AFNZ-730 V1.0