FCC ID: 2ATO4TOYDIY4IN1PLUS 3D Printer

 

FCC ID:2ATO4TOYDIY4IN1PLUS

------------------------------------- Manual ------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------

A. Product overview Disclaier-------------------------------------------------------------------------------------

Safety Instructions------------------------------------------------------------------------

Structural Schematic--------------------------------------------------------------------

6SHFLFDWLRQ

Packing List--------------------------------------------------------------------------------

B. Equipment Set

-------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------

---------------------------------------------------------------------------

Menu Feature-----------------------------------------------------------------------------

FDM--------------------------------------------------------------------

FDM-Dual ----------------------------------------------------------------------

Laser Engraving--------------------------------------------------------------------------

CNC Carving-------------------------------------------------------------------------------

C. EcubWare slice Settings Setup EcubWare-------------------------------------------------------------------------

FDM Setting

FDM 3D Print------------------------------------------------------------------------------

FDM_Multi-Color 3D print------------------------------------------------------------------

FDM_Multi-Material 3D print----------------------------------------------------------------

LASER Setting----------------------------------------------------------------------------

CNCSetting-------------------------------------------------------------------------------

--------------------------------------------------------------------------

D. Equipment Maintenance Maintenance and cleaning of guide rail-----------------------------------------------------

Maintenance of printing platform------------------------------------------------------------

CNC plate----------------------------------------------------------------------------------

Laser Toolhead life-------------------------------------------------------------------------

CNC Toolhead life--------------------------------------------------------------------------

04 05-09 10 11 12-13 15 16 17 18 19-22 23-26 27-30 31-33 35-37 38-39 40-42 43-44 45-46 47-48 49-59 61 61 61 61 61 E. Unable to start-up--------------------------------------------------------------------------

6FUHHQRZHUVFUHHQZKLWHVFUHHQQRGLVSOD\-----------------------------------------------

Temperature display alarm------------------------------------------------------------------

SD Card contents can not be read----------------------------------------------------------

7KHPHQXVZLWFK7RROKHDGIXQFWLRQFDQQRWEHDFWLYDWHG------------------------------------

&DQQRWUHWXUQWR]HUR;<LQSDFWFDQQRWUHWXUQWR]HUR=FDQQRWUHWXUQWR]HUR--------------

Automatic reboot---------------------------------------------------------------------------

=RVHWVHWWLQJLVQRWVXFFHVVIXO7KHUVWOD\HULVVRFORVHRUVRIDUWRWKHSODWIRUP----------

The Toolhead can not be reset after changing-----------------------------------------------

)'0IDLOHGWRIHHGXQVFUHZSOXJ-----------------------------------------------------------

)'0SULQWUVWOD\HUQRQVWLFNEDVHSODWH----------------------------------------------------

/DVHUHQJUDYLQJLQWKHSULQWLQJSURFHVVSRLQWVRIOLJKWLVYHU\ODUJHGLGQRWFDUYHRXWWKH

pattern-------------------------------------------------------------------------------------

&1&HQJUDYLQJDQGPLOOLQJLQWKHSULQWLQJSURFHVVSDUWRIWKHSURFHVVLQJSDWWHUQDQRWKHU

part of the processing pattern---------------------------------------------------------------

63 63 63 63 63 63 63 63 64 64 64 64 Welcome to contact us!

64

-----------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

W elcom e to choose EcubM aker D isclaim er

------------------------------------------------------------------------------------------------------------------------------------------

Before using TOYDIY, you must read the safety instructions on the next page. We are not responsible for any personal damage caused by violation operation and disobey the safety instruction when using TOYDIY. Warning: The FDM Toolhead and FDM-Dual Toolhead contain heating elements. Do not touch the nozzle directly by your hands to avoid scald. After printing, let TOYDIY cool down to indoor temperature before cleaning. Warning: Laser Toolhead contains Laser device. Make sure you wear Safety Glasses when using it. Do not observe the laser directly without Safety Glasses. Warning: CNC Toolhead contains high-speed motor, violation operation may cause damage to graver, make sure you wear Safety Glasses when using it. Warning: Never leave the TOYDIY unattended while operating always stay within sight. Look at it frequently. Warning: When inspecting the TOYDIY, please plug out it at first, and make sure it has been powered off before checking. Warning: Do not move the axis by hand directly , otherwise the driver chip on the motherboard will be burnt. 7KLVPDQXDOLVGHVLJQHGWROHWQHZDQGROGFXVWRPHUVXQGHUVWDQGDQGEHFRPH

IDPLOLDUWRWKHRSHUDWDWLRQRIWKH(FXE0DNHU72<',<LQ'3ULQWHUKHUHLQ

DIWHUUHIHUUHGWRDV72<',</HW\RXNQRZKRZWRXVHRXUPDFKLQHVFRUUHFWO\

3OHDVHUHDGWKLVPDQXDOFDUHIXOO\HYHQLI\RXKDYHEHHQXVHGWKHRWKHU'

SULQWHUVRI(FXEPDNHU&RPSDUHGZLWKWKHSUHYLRXV'SULQWHUVWKH72<',<

KDVPDGHIXUWKHULPSURYHPHQWLQPDQ\DVSHFWV7KLVPDQXDOZLOOLQWURGXFH

WKRVHLPSURYHPHQWRQHE\RQH

,QVHFWLRQV$DQG%\RXZLOOOHDUQVRPHEDVLF6HWWLQJVVXFKDVKRZWRXQSDFN

SURSHUO\DQGKRZWRGRWKHEDVLF6HWWLQJV6HFWLRQ&a(PDLQO\LQWURGXFHVKRZ

WROHYHOSULQWPDLQWDLQDQGUHSDLU

:HDUHJODGWKDW\RXFKRRVH72<',<LQ'SULQWHU7KLVPDQXDOZLOOOHW\RX

NQRZDERXWWKHRSHUDWLRQRI72<',<PDNH\RXFUHDWHPRUHSRVVLELOLWLHVLQWKH

'ZRUOG

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Safety Instructions

------------------------------------------------------------------------------------------------------------------------------------------

3OHDVHUHDG7KLVDWUVWLPSURSHURSHUDWLRQRIWKH72<',<PD\FDXVHUH

H\HVRUVNLQLQMXU\DQGRWKHUVHULRXVUHSHUFXVVLRQ3OHDVHUHDGWKURXJKWKLV

VHFWLRQEHIRUH\RXVWDUWXVLQJ/DVHU7RROKHDGDVZHOODVWKHRWKHUVZKRZLOOXVH

/DVHU7RROKHDG

Before You Start

:HDUWKH/DVHU6DIHW\*ODVVHVEHIRUH\RXVHWXSWKH/DVHU7RROKHDGDQG

NHHSLWWKURXJKRXWWKH/DVHU(QJUDYLQJSURFHVV

&KLOGUHQVKRXOGRQO\EHDOORZHGWRXVH/DVHU7RROKHDGXQGHUWKHVXSHUYLVLRQ

DQGDVVLVWDQFHRIDGXOWVDWDOOWLPHV

'RQRWXVH\RXU72<',<ZKLOHXQGHUWKHLQXHQFHRIDOFRKRORUGUXJV

8VLQJ/DVHUVKRXOGREH\WKHUXOHVDQGVWDQGDUGVHVSHFLDOO\ZKHQLQVWDOOHGLQ

DQHGXFDWLRQDOLQVWLWXWLRQRUZRUNSODFH0DNHVXUHWKDW\RXFRPSO\IXOO\ZLWKDOO

DSSOLFDEOHUXOHV

'RQRWWRXFKWKH/DVHU7RROKHDGRIWKH72<',<ZKLOHWKH/DVHULVRQ,I\RX

ZHUHEXUQWE\DFFLGHQWWXUQLWRLPPHGLDWHO\DQGVHHNKHOSIURPGRFWRUV

7RUHGXFHWKHULVNRIHOHFWULFVKRFNRUUH

7U\QRWWRVHUYLFHUHSDLURUPRGLI\WKH72<',<

1HYHUWU\WRDFFHVVWKHZLULQJRIWKH72<',<

'RQRWRSHQWKHSRZHUVXSSO\RUDQ\RWKHUVHDOHGSRUWLRQRIWKH72<',<

,IWKH72<',<LVGDPDJHGWXUQRWKH72<',<XQSOXJWKHSRZHUDGDSWHU

DQGFRQWDFWVXSSRUW#]GGSFRPLPPHGLDWHO\

,IWKHUHLVDQ\HPHUJHQF\RUPDOIXQFWLRQWXUQRII72<',<DQGXQSOXJWKH

SRZHUDGDSWHU

2QO\XVHSURSHUO\JURXQGHGRXWOHW

7KH72<',<V/DVHU7RROKHDGHQJUDYHZLWKDEHDPRIKLJKLQWHQVLW\LQIUDUHG

OLJKW7KH/DVHUFDQJHQHUDWHH[WUHPHO\KLJKWHPSHUDWXUHVLQWKHPDWHULDOEHLQJ

HQJUDYHG,QVRPHFRQGLWLRQLWZLOOEHSRVVLEOHWRLJQLWHWKHPDWHULDOEHLQJ

HQJUDYHGDQGWKHDPHPD\VSUHDGRXWVLGHRIWKHDUHD,IUHWKHDPHFRXOG

GHVWUR\\RXU72<',<DQGVSUHDGHYHQUHLQWKHEXLOGLQJ

'RQRWXVHWKH72<',<WR/DVHUHQJUDYHDQ\WKLQJWKDWLVQRWVXSSRUWHGE\WKH

TOYDIYHYHQLI\RXGRQRWLQWHQGWRHQJUDYHLW/HDUQPRUHDERXWVXSSRUWHG

PDWHULDOVEHORZ

'RQRWVWDFNPDWHULDOVIRUH[DPSOHDWWHPSWLQJWREXUQWZRRUPRUHSLHFHVRI

SDSHUDWRQHWLPH0XOWLSOHSLHFHVDUHHDVLHUWREHLJQLWHG

'RQRWSODFHDQ\WKLQJRQWRSRIWKH72<',<

'RQRWVWRUHVRXUFHVRIIODPPDEOHYDSRUVOLNHSDLQWDFHWRQHJDVROLQHRU

DOFRKROZLWK\RXU72<',<LQWKHVDPHURRP)ODPPDEOHYDSRUVFRXOGEHLJQLWHG

GXULQJRSHUDWLRQ

:KHQHQJUDYLQJFRPSOHWHFHUWDLQPDWHULDOVOLNHSODVWLFVFDQUHPDLQKRW

:DLWIRUWKHPFRROLQJGRZQEHIRUH\RXWRXFKWKHP

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Safety Instructions

------------------------------------------------------------------------------------------------------------------------------------------

Safety Equipment

$OZD\VHTXLSDSURSHUO\PDLQWDLQHGDQGLQVSHFWHGUHH[WLQJXLVKHUQHDUWKH

PDFKLQHDQGOHDUQKRZWRXVHLW$ZHWWRZHOFDQDOVREHXVHIXOLQH[WLQJXLVKLQJ

VPDOOUHV

0DNHVXUHVPRNHDODUPVDUHLQVWDOOHGDQGWHVWHGLQWKHEXLOGLQJUHTXLUHGE\

ORFDOOHJLVODWLRQDQGPDQXIDFWXUHUUHFRPPHQGDWLRQV

Keep Watching During Operation

1HYHUOHDYHWKH72<',<XQDWWHQGHGZKLOHRSHUDWLQJDOZD\VVWD\ZLWKLQ

VLJKW/RRNDWLWIUHTXHQWO\

$VPDOODPHZKHUHWKHODVHUEHDPVWULNHVWKHPDWHULDOLVQRUPDO7KLVDPH

VKRXOGPRYHZLWKWKHODVHUDQGVKRXOGQRWUHPDLQOLWZKHQWKHODVHUKDVPRYHG

SDVW,IWKHUHLVDODVWLQJDPHRQWKHPDWHULDO

3RZHURWKHPDFKLQHDQGXQSOXJWKHSRZHUDGDSWHU

,ILWLVVDIHWRGRVRH[WLQJXLVKWKHUHZLWKDZHWWRZHORUDUH

H[WLQJXLVKHU

,IWKHUHFDQQRWEHH[WLQJXLVKHGRULILWVSUHDGVRXWVLGHWKH72<',<

FDOO\RXUORFDOHPHUJHQF\QXPEHUIRUH[DPSOHDQGHYDFXDWHWKH

EXLOGLQJ

'RQRWRSHUDWHWKH72<',<IXUWKHUXQWLO\RXKDYHFRQWDFWHGXVIRUVH

rvice information at support@zd3dp.com.

<RXU72<',</DVHU7RROKHDGLVD&ODVV%ODVHUSURGXFW7KHODVHUHPLWV

HQRXJKEHDPWRFDXVHVNLQDQGH\HLQMXU\7KH72<',<SURYLGHVDSDLURI/DVHU

6DIHW\*ODVVHVWRSURWHFW\RXUH\HV:HDUWKH/DVHU6DIHW\*ODVVHVEHIRUH\RX

VHWXSWKHODVHUHQJUDYHUDQGWKURXJKRXWWKHODVHUHQJUDYLQJSURFHVV

.HHSDVDIHGLVWDQFHIURPWKHPDFKLQHZKHQLWVODVHUHQJUDYLQJ

CAUTION!

Use of controls or adjustments or performance of procedures other than those VSHFLHGKHUHLQPD\UHVXOWLQKD]DUGRXVUDGLDWLRQH[SRVXUH

Do not modify or service CAUTION!

$WWHPSWLQJWRPRGLI\RUVHUYLFHWKH72<',<PD\UHVXOWLQKD]DUGRXVODVHUOLJKW

H[SRVXUH

To reduce the risk of injury:

'RQRWDWWHPSWVHUYLFH$OOVHUYLFHPXVWEHSHUIRUPHGRQO\E\WKH72<',<

IDFWRU\RUE\IDFWRU\DXWKRUL]HGWHFKQLFLDQV

'RQRWDWWHPSWWRDOWHURUPRGLI\WKH72<',<

'RQRWWU\WRRSHQVHDOHGSRUWLRQVRIWKH72<',<LQFOXGLQJDQ\SURWHFWLYH

FRYHULQJVRUKRXVLQJV

:KHQ\RXXVH\RXU72<',<WKHODVHUFUHDWHVYLVLEOHDQGLQYLVLEOHDHURVROV

JDVHVYDSRUVDQGSDUWLFXODWHVUHIHUUHGWRKHUHDVVPRNHDQGIXPHV7KH

VPRNHDQGIXPHVFDQLQFOXGHFDUERQPRQR[LGHDQGRWKHUFKHPLFDOVGHSHQGLQJ

RQWKHPDWHULDOEHLQJODVHUHGDQGFDQ&DXVHVKHDOWKKD]DUGV7KHIDQLQWKH

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Safety Instructions

------------------------------------------------------------------------------------------------------------------------------------------

/DVHU7RROKHDG0RGXOHFDQEORZDZD\VRPHVPRNHDQGIXPHVEXWLWPLJKWVWLOO

EHDELWVPHOO\

'RQRWIRUJHWWRFKHFN\RXUORFDOUXOHVIRUDLUTXDOLW\UHJXODWLRQVWKDWPD\DSSO\

WR\RX

Materials Safety





Materials Must Fit Materials that do not fit properly may obstruct operation and result in GDPDJHDQGLQFUHDVHULVNRIUH

7KHVL]HRIWKHPDWHULDOPXVWEHVPDOOHUWKDQ[PP[

'RQRWSODFHUROOHGXSPDWHULDOLQWKH72<',<,WPD\EHWRRWDOORUXQUROO

GXULQJODVHUHQJUDYLQJREVWUXFWLQJRSHUDWLRQ

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Safety Instructions

------------------------------------------------------------------------------------------------------------------------------------------

2.Safety Information-CNC Toolhead Read This First,PSURSHUO\RSHUDWLQJWKH72<',<FDQFDXVHLQMXU\RURWKHU

VHULRXVFRQVHTXHQFHVIURPWKH&1&7RROKHDG3OHDVHUHDGWKURXJKWKLVVHFWLRQ

EHIRUH\RXVWDUW&1&FDUYLQJDQGHQVXUHHYHU\RQHHOVHZKRXVHVLWUHDGVWKLV

WRR

Before You Start

,WLVUHFRPPHQGHGWKDWH[SHULHQFHGXVHUVDQGXVHUVRYHU\HDUVROGSHUIRUP

WKHVHWXSDQGXVHWKH&1&7RROKHDG

:HDUWKH6DIHW\*ODVVHVEHIRUH\RXVHWXSWKH&1&7RROKHDGDQGWKURXJKRXW

WKH&1&FDUYLQJSURFHVV

7KH&1&7RROKHDGDUHVKDUS3OHDVHKDQGOHWKHPFDUHIXOO\DQGNHHSWKHP

RXWRIUHDFKRIFKLOGUHQ

.HHSDVDIHGLVWDQFHIURP72<',<ZKHQLWLVFDUYLQJ

'RQRWXVH\RXU72<',<ZKLOHXQGHUWKHLQXHQFHRIDOFRKRORUGUXJV

'RQRWWRXFKWKH&1&7RROKHDGZKLOHWKH72<',<LVRQ,I\RXDUHFXWE\

DFFLGHQWWXUQR72<',<LPPHGLDWHO\DQGVHHNKHOSIURPGRFWRUV

Electrical Safety 7RUHGXFHWKHULVNRIHOHFWULFVKRFNRUUH

'RQRWWU\WRVHUYLFHUHSDLURUPRGLI\WKH72<',<

1HYHUWU\WRDFFHVVWKHZLULQJRIWKH72<',<

'RQRWRSHQWKHSRZHUVXSSO\RUDQ\RWKHUVHDOHGSRUWLRQRIWKH72<',<

,IWKH72<',<LVGDPDJHGWXUQRII72<',<XQSOXJWKHSRZHUDGDSWHUDQG

contact support@zd3dp.comLPPHGLDWHO\

,IWKHUHLVDQ\HPHUJHQF\RUPDOIXQFWLRQWXUQRII72<',<DQGXQSOXJWKH

SRZHUDGDSWHU

2QO\XVHDSURSHUO\JURXQGHGRXWOHW

Keep Watch During Operation

1HYHUOHDYHWKH72<',<XQDWWHQGHGZKLOHRSHUDWLQJDOZD\VVWD\ZLWKLQ

FORVHDVLGHDQGORRNDWLWIUHTXHQWO\

Materials Safety

,WVUHFRPPHQGHGWRRQO\&1&7RROKHDGWKHIROORZLQJPDWHULDOV

:RRGDFU\OLF39&H[SDQVLRQVKHHWSODVWLF$%63&HWF

 'R 127 &1&7RROKHDG WKH IROORZLQJ PDWHULDOV7KH\ PD\ GDPDJH WKH

72<',<RUFDXVHLQMXU\

0HWDOHWF

Materials Must Fit Materials that do not fit properly may obstruct operation and result in damage and cause injury.

7KHVL]HRIWKHPDWHULDOPXVWEHVPDOOHUWKDQ[[PP[[



'RQRWSODFHUROOHGXSPDWHULDOLQWKH6QDSPDNHU,WPD\EHWRRWDOORUXQUROO

GXULQJFDUYLQJREVWUXFWLQJRSHUDWLRQ

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Safety Instructions

------------------------------------------------------------------------------------------------------------------------------------------

3.Operating Environment

     7R SURORQJ WKH OLIH RI \RXU72<',< DQG WR UHGXFH WKH ULVN RI ILUH RU

PHFKDQLFDOIDLOXUHGRQRWSXWWKH72<',<ZKHUHLWFRXOGH[SHULHQFH

([WUHPHWHPSHUDWXUHRUKXPLGLW\

6WRUDJHEHORZGHJUHHV)DKUHQKHLW&HOVLXVRURYHUGHJUHHV

)DKUHQKHLW&HOVLXV

([WUHPHKXPLGLW\FRQGLWLRQVEHORZRUPRUHWKDQ

'LUHFWVXQOLJKW

5DLQPRLVWXUHRUOLTXLGV

([FHVVLYHKDLUGXVWRUVPDOOSDUWLFOHV

,IDQ\RIWKHIROORZLQJRFFXULPPHGLDWHO\WXUQR72<',<XQSOXJWKHSRZHU

DGDSWHUDQGFRQWDFWsupport@zd3dp.com'RQRWXVH\RXU72<',<DJDLQ

XQWLOWKHLVVXHKDVEHHQDGGUHVVHGE\VXSSRUW

7KH72<',<VWRSVXQH[SHFWHGO\

<RXVHHDQ\GDPDJHWRWKHLQWHULRUFRPSRQHQWVRIWKH72<',<

<RXQRWLFHDQXQXVXDOVRXQGFRPLQJIURPWKH72<',<WKDWZDVQRWRFFXU

SUHYLRXVO\

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Modle Technology Specialty Nozzle Printing Size Color Interface Language LED Light Molding Precision Position Accuracy Layer Thickness Printing Speed Heatbed function Heatbed Temperature Connection PC System 3RZHU Weight Machine Size Packing Size 6OLFLQJ6RIWZDUH File Type FDM Toolhead FDM-Dual Toolhead LASER Toolhead CNC Toolhead

)'0ODPHQW

)'0'XDOODPHQW LASER materials CNC materials

(FXE0DNHU7R\',<LQ'SULQWHU FDM/LASER/CNC 4 funcation automatic levelingeasy to use FDMToolheadFDM-DualToolhead LaserToolheadCNCToolhead 180mm*180mm*180mm Black 128*64 LED screen English

<HV

PP

=$[LVXP;<$[LVXP

PPPP 0D[POK automatic levelingable heatingseparating-

KHDWEHG

PD[ USB on-line Printing 6'&DUGROLQH3ULQWLQJ

:LQ[S9LVWDELW 9R O W D J H    9    9  2 8 7 3 8 7   9   $

3RZHU:50Hz-60Hz 14kg 372315395mm 460400460mm EcubWare Input STL/OBJ2XW3XW*FRGH

PP

PP 'XDOODPHQWSULQWLQJ

/DGHUSRZHU:/DVHUZDYHOHQJWKQP DC motor 40WRpm 10000 PLA-T210 PDLQ3/$7

support39$ZDWHUVROXELOLW\ODPHQW ZRRGPMMAAcrylic Leatherplastic ZRRGPMMAAcrylicPVC -expension

-sheetplastic

-----------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

----------------------------------------------------------------------------------------------------------------------------------------------

:KHQ\RXUHFHLYH72<',<SOHDVHIROORZWKHVWHSVWRRSHQ

WKHER[(DFK72<',<LVVWULFWO\WHVWHGDQGSDFNHGEHIRUHLW

OHDYHVIURPWKHIDFWRU\3OHDVHEHFDUHIXOZKHQXQSDFNLQJ

Tip: Please take TOYDIY out of the box lightly and carefully. So as to avoid the damage of TOYDIY . If you tear too hard, it may scratches o and even damage TOYDIY.

-----------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

-------------------------------------------------------------------------------------------------------------------------------------------

1.Unboxing

/D\WKHXQRSHQHG72<',<RQWKHIORRU

2SHQWKHER[UHPRYHWKHOLGDQGWDNHRXW72<',<XVHUPDQXDO,WLV

UHFRPPHQGHGWKDW\RXIROORZWKHVWHSVLQWKHXVHUPDQXDOWRLQVWDOODQGNQRZ

WKHFRQWHQWVLQWKHER[,I\RXQGWKDWDQ\WKLQJGHVFULEHGLQWKHPDQXDOLV

PLVVLQJSOHDVHFRQWDFW\RXUYHQGRU

7DNHRXWWKHSHDUOFRWWRQXVHGIRUEXHUSURWHFWLRQ

2. Remove TOYDIY from the box

5HPRYH72<',<IURPWKHER[SODFHLWRQDVWDEOHSODFHDQGUHPRYHWKH

SODVWLFSURWHFWLYHEDJ

Tip:The is not a handle. Never pull or twist the

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

---------------------------------------------------------------------------------------------------------------------------------------------

$IWHUXQER[LQJOHW VDVVHPEOH72<',<

Mounting Toolhead(The initial default Toolhead is the FDM Toolhead)

Plug into the adapter 3.Press the button, the handle light and the screen will be light up.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

------------------------------------------------------------------------------------------------------------------------------------------------

%HORZLVWKHIXQFWLRQPHQXRI72<',<

(FXE0DNHU72<',<

FDM 3D Printer

> Print Form SD Filament Utility Back

> )LOHJFRGH

)LOHJFRGH

)LOHJFRGH

)LOHJFRGH

(FXE0DNHU72<',<

FDM 3D Printer Print Form SD

> Filament Utility D i s p l a y s t h e c u r r e n t UPZDUH7RROKHDGW\SH Print from SD card

6HOHFWOHSULQW D i s p l a y s t h e c u r r e n t UPZDUH7RROKHDGW\SH Material set

Back

> Set Preheat Temp Preheat Load Filament Unload Filament

(FXE0DNHU72<',<

FDM 3D Printer Print Form SD Filament

> Utility Back Auto Home 0RYH$[LV Set Origin

=2VHW Change ToolHead Restore defaults Printer info D i s p l a y s t h e c u r r e n t UPZDUH7RROKHDGW\SH Feature set

(DFK D[LV UHWXUQV WR LWV

original position Manual shaft Set the machining origin of CNC Toolhead 6HWWKH=2VHWYDOXH Change ToolHead Restore defaults

(TXLSPHQWLQIRUPDWLRQ

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

 3RZHU XS LI WKHUH DUH ILODPHQW UHVW

LQWKH7RROKHDGSOHDVHHQWHUWKHRSWLRQ

)LODPHQW!8QORDG)LODPHQWDWUVWWRH[LWWKH

FRQVXPDEOHVRWKHUZLVHLWZLOOEHHDV\WR

SOXJLQ

&RQUPWKHFXUUHQW7RROKHDGW\SHRQWKH

VFUHHQ,ILWVKRZVWKH)'07RROKHDGMXPS

VWUDLJKWWRVWHS,ILWVKRZVRWKHU7RROKHDG

SURFHHGWRVWHS

8VH0HQX%XWWRQHQWHU8WLOLW\!&KDQJH

7RRO+HDGHU!&KDQJH7R)'07RROKHDG

EURZVHWKHFRQWHQWVGLVSOD\HGRQWKHVFUHHQ

DQGFOLFN7RWKHODVWVWHS

/RRVHWKH7RRO+HDG6FUHZIL[LQJWKH

FXUUHQW 7RROKHDG UHPRYH WKH RULJLQDO

7RROKHDG XSZDUG EXW NHHS WKH FDEOH

FRQQHFWHG5HPRYHLWDQGSXWLWDVLGH3D\

attention not to unplug the cable at this PRPHQW

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

,QVWDOOWKHQHZ7RROKHDGDQGWLJKWHQWKH

FXUUHQW7RROKHDGZLWKWKH7RRO+HDG6FUHZ

MXVWUHPRYHG

6KXWGRZQWKHHTXLSPHQW5HPRYHWKH

7RRO+HDG)ODW&DEOHLQVHUWWKH7RRO+HDG

)ODW&DEOHLQWRWKHQHZ7RROKHDGLQVHUWWKH

ODPHQWWXEHLQWRWKHQHZ7RROKHDGHQVXUH

WKDWLWLVLQVHUWHGWRWKHERWWRP

5HERRWWKHHTXLSPHQWWRFKHFNWKH

VWDWXVRIWKHGLVSOD\VFUHHQ,ILWLVQRW)'0

7RROKHDGUHSHDWWKHWKLUGVWHSXQWLOWKH

UPZDUHSURJUDPVZLWFKFRPSOHWH

(FXE0DNHU72<',<

FDM 3D Printer

> Print Form SD Filament Utility

'LVSOD\VWKHFXUUHQWILUPZDUH

Toolhead type Tip:

7KHRULJLQDO7RROKHDGQHHGVWREHFRROGRZQEHIRUHWKHRSHUDWLRQWRDYRLG

scald.

:KHQWKHILUPZDUHSURJUDPLVVZLWFKLQJLWQHHGVWRZDLWDERXWVHFRQGVLQ

the last step before shut down and reboot for switching successfully.

:KHQSUHVVLQJWKHILODPHQWWXEHPDNHVXUHWRSUHVVLWWRWKHERWWRPDQG

then pull out the filament tube, otherwise it is difficult to pull out the filament tube.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

2. Install Filament Tube and Filament

,QVHUWERWKHQGVRIWKH)LODPHQW7XEHRIWKHODPHQWLQWR([WUXGHUDQGWKH

)'07RROKHDGVHSDUDWHO\,WPXVWEHSXVKHGWRWKHERWWRPRWKHUZLVHZRXOG

FDXVHMDP

8QSDFNWKHODPHQWSODFHWKHODPHQWRQWKHODPHQWVXSSRUWDQGLQVHUW

WKHODPHQWLQWRWKH([WUXGHURQO\HQDEOHWKH([WUXGHUIRU)'0VLQJOH

SULQWLQJDQGSXVKWKHODPHQWXQWLOLWVHQGDWDGLVWDQFHRIPPIURPWKH

7RROKHDGODPHQWLQOHW

2SHUDWHWKHPHQXERWWRPWRHQWHUWKHFilament > load Filament > load Up Filament LQWKHPHQXDQGKHDWXSWKHILODPHQWXQWLOWKHILODPHQWFDQEH

H[WUXGHGIURPQR]]OHQRUPDOO\,IQRWKUHDGFRPHRXWIURPQR]]OHSOHDVH

FKHFNUHIHUWRWKHUVWVWHSWRFKHFNRXWLIODPHQWLVLQVHUWHGLQWRWKHVSHFLHG

H[WUXGHUDQGWKHVSHFLHGSRVLWLRQDVUHTXLUHG

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

&RPSOHWHWKHGHIDXOWOHPRGHOSULQWLQJ

,QVHUWRULJLQDO6'FDUGDQGLQVWDOOVRIWPDJQHWLFSODWH

*RWRWKHPHQX3ULQWIURP6'!)'0'3ULQWLQJ7HVW0RGOHJFRGHVHOHFW

WKHILOHDQGFOLFN3ULQW

:DLWIRUILQLVK

7DNHRIIVRIWPDJQHWLFSODWHDQGWDNHWKHPRGHO

6SHFLDOVHWWLQJ$GMXVW=RVHW

=RVHW,QVWUXFWLRQV

=RIIVHWSDUDPHWHULVXVHGWRFDOLEUDWHWKHGLVWDQFHEHWZHHQWKHQR]]OH

DQG WKH SODWIRUP 1RUPDOO\ EHIRUH WKH PDFKLQH OHDYHV WKH IDFWRU\ DQ

DSSURSULDWH=RIIVHWYDOXHZLOOEHVHWDQGWKHYDOXHRI=RIIVHWZLOOEHDERXW

PP+RZHYHUWKLVYDOXHPD\FKDQJHDIWHUWKHQR]]OHEHLQJUHPRYHG

DQGDVVHPEOHG,IWKHILUVWOD\HURIWKHGHIDXOWILOHPRGHOLVSULQWHGDQG\RX

QRWLFHWKDWWKHGLVWDQFHEHWZHHQWKHQR]]OHDQGWKHSULQWLQJSODWIRUPVKRXOGEH

LQFUHDVHGIRUWKHQR]]OHLVWRRWLJKWWKHQWKH=RVHWYDOXHVKRXOGEHLQFUHDVHG

IRUH[DPSOHIURPPPWRPPRWKHUZLVHWKH=RVHWYDOXHVKRXOGEH

UHGXFHG

7KHUHDUHWZRZD\VWRVHW]RVHWYDOXH Manual setting: enter the Utility > Z offset > Manual Input Z offsetGLUHFWO\,QSXWWKH

YDOXHWREHVHWWKURXJKWKHPHQXERWWRPWKHQUHWXUQWRWKHFXUUHQWLQWHUIDFH

and click Save SettingsWR6DYH

Set: Utility > Z offset > Auto Set Z offsetDWWKLVWLPHSXWDQ$SDSHUEHWZHHQWKH

SODWIRUPDQGWKHQR]]OHDQGURWDWHWKHPHQXERWWRQWRDGMXVWWKHGLVWDQFH

EHWZHHQWKHQR]]OHDQGWKHSODWIRUPVRWKDWWKHKHLJKWEHWZHHQWKHQR]]OHDQG

WKHSODWIRUPLVMXVWDSLHFHRI$SDSHU$WWKLVWLPHWKHYDOXHGLVSOD\HGRQWKH

VFUHHQLVDQDSSURSULDWH=RVHWYDOXHDQGWKHQUHWXUQWRWKHFXUUHQWLQWHUIDFH

DQGFOLFN6DYH6HWWLQJVWR6DYH

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

1.Install FDM-Dual Toolhead

3RZHU XS LI WKHUH DUH ILODPHQW UHVW

LQ WKH 7RROKHDG SOHDVH HQWHU WKH option Filament>Unload Filament DW ILUVW WR H[LW WKH

FRQVXPDEOHVRWKHUZLVHLWZLOOEHHDV\WRSOXJ

LQ

7KHUH LV QR QHHG WR FKDQJH WKH ILUPZDUH

EHWZHHQ )'0 7RROKHDG DQG )'0'XDO

7RROKHDG DOO \RX QHHG LV WR FKDQJH WKH

7RROKHDG

&RQILUPWKHFXUUHQW7RROKHDGW\SHRQWKH

VFUHHQ,ILWVKRZVWKH)'07RROKHDGMXPS

VWUDLJKWWRVWHS,ILWVKRZVRWKHU7RROKHDG

SURFHHGWRVWHS

8VH 0HQX %XWWRQ HQWHUUtility > Change ToolHeader > Change To FDM Toolhead, EURZVHWKH

contents displayed on the screen and click To WKHODVWVWHS

/RRVHWKH7RRO+HDG6FUHZIL[LQJWKH

FXUUHQW7RROKHDGUHPRYHWKHRULJLQDO7RROKHDG

XSZDUGEXWNHHSWKHFDEOHFRQQHFWHG5HPRYH

LWDQGSXWLWDVLGH3D\DWWHQWLRQQRWWRXQSOXJ

WKHFDEOHDWWKLVPRPHQW

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

,QVWDOOWKHQHZ7RROKHDGDQGWLJKWHQWKH

FXUUHQW7RROKHDGZLWKWKH7RRO+HDG6FUHZ

MXVWUHPRYHG

6KXWGRZQWKHHTXLSPHQW5HPRYHWKH

7RROKHDGOLQHLQVHUWWKHOLQHLQWRWKHQHZ

7RROKHDGLQVHUWWKH ([WUXGHU VODPHQW

tube into the right side filament tube joint RQGXDOH[WXGHULQVHUWWKH ([WUXGHU V

ODPHQWWXEHLQWRWKHOHIWVLGHODPHQWWXEH

MRLQWRQGXDOH[WUXGHUHQVXUHERWKVLGH

ODPHQWWXEHVDUHLQVHUWHGWRWKHERWWRP

5HERRWWKHHTXLSPHQWWRFKHFNWKH

VWDWXVRIWKHGLVSOD\VFUHHQ,ILWLVQRW)'0

7RROKHDGUHSHDWWKHWKLUGVWHSXQWLOWKH

UPZDUHSURJUDPVZLWFKFRPSOHWH

(FXE0DNHU72<',<

FDM 3D Printer

> Print Form SD Filament Utility

'LVSOD\VWKHFXUUHQWILUPZDUH

Toolhead type Tip:

7KHRULJLQDO7RROKHDGQHHGVWREHFRROGRZQEHIRUHWKHRSHUDWLRQWRDYRLG

scald.

:KHQWKHILUPZDUHSURJUDPLVVZLWFKLQJLWQHHGVWRZDLWDERXWVHFRQGVLQ

the last step before shut down and reboot for switching successfully.

:KHQSUHVVLQJWKHILODPHQWWXEHPDNHVXUHWRSUHVVLWWRWKHERWWRPDQG

then pull out the filament tube, otherwise it is difficult to pull out the filament tube.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

2. Install Thread tube and Consumables

,QVHUWERWKHQGVRIWKH)LODPHQW7XEHRIWKHODPHQWLQWR([WUXGHUDQGWKH

)'07RROKHDGVHSDUDWHO\,WPXVWEHSXVKHGWRWKHERWWRPRWKHUZLVHZRXOG

FDXVHMDPH[WUXGHUPDWFKWRWKHULJKWODPHQWWXEHWKHH[WUXGHUPDWFKWR

WKHOHIWJXLGHZLUHWXEH

8QSDFNWKHILODPHQWSODFHWKHILODPHQWRQWKHILODPHQWVXSSRUWLQVHUW

WKHPDLQODPHQWLQWRWKH ([WUXGHU,QVHUWWKHVXSSRUWODPHQW into the

([WUXGHUDQGSXVKWKHODPHQWVXQWLOLWVHQGDWDGLVWDQFHRIPPIURPWKH

7RROKHDGODPHQWLQOHW

2SHUDWHWKHPHQXERWWRPWRHQWHUWKH)LODPHQW!ORDG)LODPHQW!ORDG8S

)LODPHQWLQWKHPHQXDQGKHDWXSWKHODPHQWXQWLOWKHODPHQWFDQEHH[WUXGHG

IURPQR]]OHQRUPDOO\,IQRWKUHDGFRPHRXWIURPQR]]OHSOHDVHFKHFNUHIHUWR

WKHUVWVWHSWRFKHFNRXWLIODPHQWLVLQVHUWHGLQWRWKHVSHFLHGH[WUXGHUDQG

WKHVSHFLHGSRVLWLRQDVUHTXLUHGWKLVVWHSPD\E\SDVVDVDORDGXSODPHQW

operation has been performed in the "Load Up Filament"VHFWLRQ

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

&RPSOHWHWKHGHIDXOWOHPRGHOSULQWLQJ

,QVHUWRULJLQDO6'FDUGDQGLQVWDOOVRIWPDJQHWLFSODWH

*RWRWKHPHQX3ULQWIURP6'!)'0'XDO'3ULQWLQJ7HVW0RGOHJFRGH

VHOHFWWKHILOHDQGFOLFN3ULQW

:DLWIRUILQLVK

7DNHRIIVRIWPDJQHWLFSODWHDQGWDNHWKHPRGHO



------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

1.Install Laser Toolhead

3RZHU XS LI WKHUH DUH ILODPHQW UHVW

LQWKH7RROKHDGSOHDVHHQWHUWKHRSWLRQ

)LODPHQW!8QORDG)LODPHQWDWUVWWRH[LWWKH

FRQVXPDEOHVRWKHUZLVHLWZLOOEHHDV\WR

SOXJLQ

&RQILUPWKHFXUUHQW7RROKHDGW\SHRQ

WKHVFUHHQ,ILWVKRZVWKH/DVHU7RROKHDG

MXPSVWUDLJKWWRVWHS,ILWVKRZVRWKHU

7RROKHDGSURFHHGWRVWHS

  8VH 0HQX %XWWRQ HQWHU Utility >

Change ToolHeader > Change To Laser Toolhead, EURZVH WKH FRQWHQWV GLVSOD\HG RQ WKH

VFUHHQDQGFOLFN7RWKHODVWVWHS

/RRVHWKHKDQGVFUHZ[LQJWKHFXUUHQW

7RROKHDG UHPRYH WKH RULJLQDO7RROKHDG

XSZDUG EXW NHHS WKH FDEOH FRQQHFWHG

5HPRYHLWDQGSXWLWDVLGHPay attention not to unplug the cable at this moment.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

,QVWDOOWKHQHZ7RROKHDGDQGWLJKWHQWKH

FXUUHQW7RROKHDGZLWKWKHWRROKHDGVFUHZ

MXVWUHPRYHG

 5HERRW WKH HTXLSPHQW WR FKHFN WKH

VWDWXVRIWKHGLVSOD\VFUHHQ,ILWLVQRW)'0

7RROKHDGUHSHDWWKHWKLUGVWHSXQWLOWKH

UPZDUHSURJUDPVZLWFKFRPSOHWH

UHERRWWKHHTXLSPHQWWRFKHFNWKHVWDWXV

RIWKHVFUHHQ,ILWLVQRW/DVHU7RROKHDG

UHSHDW WKH WKLUG VWHS XQWLO WKH ILUPZDUH

SURJUDPVZLWFKLVFRPSOHWHG

(FXE0DNHU72<',<

Laser 3D Printer

> Print Form SD Filament Utility

'LVSOD\VWKHFXUUHQWILUPZDUH

Toolhead type

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

2. Install Material (wood )

3ODFHWKHVKHHWLQWKHPLGGOHRIWKHSODWIRUPDQG[WKHVKHHWLQWKHPLGGOH

RIWKHSODWIRUP,WFDQEH[HGE\WDSHDQGSUHVVLQJEORFN

&RPSOHWHWKHGHIDXOWOHPRGHOSULQWLQJ

,QVHUWRULJLQDO6'FDUGDQGLQVWDOOVRIWPDJQHWLFSODWH

*RWRWKHPHQX3ULQWIURP6'!/DVHU(QJUDYLQJ7HVW0RGOHJFRGHVHOHFW

WKHOHDQGFOLFN3ULQW

Wait for finish .3OHDVHZHDUVDIHW\JODVVHVZKHQREVHUYHWKHSURFHVVLQJ

7DNHRIIVRIWPDJQHWLFSODWHDQGWDNHWKHPRGHO



------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

4. Special setting - Adjust the focal length About Laser focal length:

Laser focal length means the setting that the Laser Toolhead generate the PD[LPXPHQHUJ\$WWKLVVWDWHODVHUVSRWZLOOKDYHVPDOOHVWVL]HDQGKLJKHVW

HQHUJ\*HQHUDOO\/DVHUIRFDOOHQJWKZLOOEHVHWXQLIRUPO\ZKHQWKHGHYLFH

OHDYHVWKHIDFWRU\+RZHYHUWUDQVSRUWDWLRQRUVRPHPDQPDGHIDFWRUPD\OHDG

VOLJKWFKDQJHVLQWKHIRFDOOHQJWKRIWKH/DVHUWXEHRIWKH/DVHU7RROKHDG:KHQ

\RXHQJUDYLQJGHIDXOWOHPRGHODQGQGVWKDWWKHVDPSOHGRHVQRWDFKLHYHWKH

GHVLUHGHHFWLWPD\EHQHFHVVDU\WRDGMXVWWKH/DVHUIRFDOOHQJWK

Laser focus adjustment mode:

Manual setting:

5HPRYHWKHVRIWPDJQHWLFSODWHRQWKHSULQWLQJSODWIRUPH[SRVHWKHPHWDO

EDVHSODWH

(QWHUWKHUtility > Auto HomePHQXDQGPRYHWKHWRROKHDGWRWKHLQLWLDO

SRVLWLRQ

Utility > Move axis > Move X, Move to 90mm; > Move Y, Move to 90mm, >Move Z, Move to 40mm

3XWRQWKHVDIHW\JODVVHVDQGHQWHUWKHPHQX Preheat > FDM headerWKHQWKH

ODVHUGHYLFHZLOOEHWXUQHGRQ5RWDWHWKHOHQVRQWKHODVHUGHYLFH VKHDGWR

DGMXVWWKHVSRWVL]H:KHQWKHVSRWLVWKHVPDOOHVWWKHFXUUHQWVWDWHLVWKHIRFDO

OHQJWKVWDWH

Tip:

Users are not allowed to adjust the laser focal length unless they are authorized maintenance personnel.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

1.Install CNC Toolhead

3RZHU XS LI WKHUH DUH ILODPHQW UHVW

LQWKH7RROKHDGSOHDVHHQWHUWKHRSWLRQ

)LODPHQW!8QORDG)LODPHQWDWUVWWRH[LWWKH

FRQVXPDEOHVRWKHUZLVHLWZLOOEHHDV\WR

SOXJLQ

&RQUPWKHFXUUHQW7RROKHDGW\SHRQWKH

VFUHHQ,ILWVKRZVWKH&1&7RROKHDGMXPS

VWUDLJKWWRVWHS,ILWVKRZVRWKHU7RROKHDG

SURFHHGWRVWHS

8VH0HQX%XWWRQHQWHU8WLOLW\!&KDQJH

7RRO+HDGHU!&KDQJH7R&1&7RROKHDG

EURZVH WKH FRQWHQWV GLVSOD\HG RQ WKH

VFUHHQDQGFOLFN7RWKHODVWVWHS

/RRVHWKH7RROKHDG6FUHZIL[LQJWKH

FXUUHQW WRROKHDG UHPRYH WKH RULJLQDO

7RROKHDG XSZDUG EXW NHHS WKH FDEOH

FRQQHFWHG5HPRYHLWDQGSXWLWDVLGHPay attention not to unplug the cable at this moment.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

,QVWDOOWKHQHZ7RROKHDGDQGWLJKWHQWKH

FXUUHQW7RROKHDGZLWKWKH7RRO+HDGVFUHZ

MXVWUHPRYHG

 5HERRW WKH HTXLSPHQW WR FKHFN WKH

VWDWXVRIWKHGLVSOD\VFUHHQ,ILWLVQRW&1&

7RROKHDGUHSHDWWKHWKLUGVWHSXQWLOWKH

UPZDUHSURJUDPVZLWFKFRPSOHWH

(FXE0DNHU72<',<

CNC 3D Printer

> Print Form SD Filament Utility

'LVSOD\VWKHFXUUHQWILUPZDUH

Toolhead type

,QVWDOO&1&ZRUNLQJSODWIRUPDQG[WXUH

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

3.Install Material (PMMA )

/RDGWKHDFU\OLFVKHHWLQWKHPLGGOHRIWKHSODWIRUPDQGIL[WKHDFU\OLF

VKHHWVZLWK[WXUHV

6HWWKHSURFHVVLQJRULJLQDQGQLVKWKHFDUYLQJDQG

PLOOLQJRIWKHGHIDXOWOHPRGHO

Tip:

+RZWRFKDQJHWKH&1&7RRO Loosen the meter screw at the lower end of the coupling on the CNC Toolhead, load the new Toolhead and tighten the meter screw. It is recommended to use the special cutter for this product. 6HW2ULJLQ Start using CNC Toolhead when printing. Set Origin, the central point in WKHVOLFLQJ(FXE:DUHPXVWEH6HWUVW

7KHFRXSOLQJEHWZHHQWKHWRROKHDGDQGWKHWRROKHDGRID&1&7RRO

must be tightened, otherwise accidents may occur.

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

C

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

1. Description of slicing EcubWare

(FXE:DUHLVD'PRGHOVOLFLQJVRIWZDUHWKDWDSSOLFDEOHIRU72<',<3OHDVH

HQWHUWKH(FXE0DNHURFLDOZHEVLWHKWWSHFXEPDNHUFRPFQDQGJHWIXUWKHU

GHWDLOVLQWKHGRZQORDGFHQWHU

EcubWare Download

)LOHVHOIH[WUDFWLQJ

&OLFNQH[W

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Set the path and click next

&OLFNQH[W

&OLFNQH[W

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

,QVWDOOLQJ

The installation complete

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

3.FDM 3D print

$SSOLFDEOH7RROKHDG)'07RROKHDG

(1)FDM 3D print

)XQFWLRQ0DLQO\XVHWRVOLFHVLQJOHPRGHO

2SHQWKH(FXE:DUHVHOHFWSULQWHUW\SH72<',<LQ

select STL model and import the model

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Choose FDM Toolhead

Adjust the model and parameters

&OLFNWKHSUHSDUHEXWWRQWRVOLFH7KHQVDYHWKHJHQHUDWHG*FRGHOHLQWR

WKH6'FDUG<RXFDQSULQWLWLQ72<',<'SULQWHU

Note:

:KHQVDYLQJ*FRGHOHSOHDVHXVH(QJOLVKOHQDPH

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

(2)FDM_Multi-Color 3D print

$SSOLFDEOH7RROKHDG)'0'XDO7RROKHDG FDM_Multi-Color 3D printPHDQVWKRVHWZRODPHQWVDUHWKHVDPHPDWHULDOEXW

GLHUHQWFRORUWKHPDWHULDOSDUDPHWHUVDQGSULQWLQJFRQJXUDWLRQDUHWKHVDPHZD\

WRSULQW

2SHQWKH(FXE:DUHVHOHFWSULQWHUPRGHO72<',<IRU)'0'XDO7RRO+HDGRQO\

6HOHFWVWOPRGHO7KH'XDOFRORUPRGHOQHHGVWZRVWOOHVWKDWDUHPDWFKHGDQG

QHVWHG,PSRUWWKRVHWZRVWOOHVLQWRWKH(FXE:DUH

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

6HOHFWWKHVDPHSULQW)LODPHQWIRUHDFKVWOOHDQGFKRRVHWKHH[WUXGHUIRU

ERWKVWOOH

6HOHFWWZRPRGHOVDQGPHUJHWKHWZRVWOPRGHOVLQWRDFRPSRVLWHPRGHO

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

6HWSULQWLQJSDUDPHWHUVIRUWKHPDWHULDOVRIH[WUXGHUDQGH[WUXGHU 

UHVSHFWLYHO\

&OLFNWKHSUHSDUHEXWWRQWRVOLFH7KHQVDYHWKHJHQHUDWHG*FRGHOHLQWR

WKH6'FDUG<RXFDQSULQWLWLQ72<',<'SULQWHU

Note:

:KHQVDYLQJDV*FRGHOHSOHDVHXVH(QJOLVKQDPHOHZKLFKGRHVQRW

support Chinese name.

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

$SSOLFDEOH7RROKHDG)'0'XDO7RROKHDG

PHDQVGLHUHQWPDWHULDOVRI)LODPHQWVWKHLU

SULQWLQJWHPSHUDWXUHDQGFRQJXUDWLRQSDUDPHWHUVDUHGLHUHQW

7KHPDLQ)LODPHQWLV3/$DQGWKHVXSSRUWLQJ)LODPHQWLV39$

2SHQWKH(FXE:DUHVHOHFWSULQWHUPRGHO72<',<IRU)'0'XDO7RRO+HDGRQO\

Choose stl modle

6HWWKHSULQWPDWHULDOIRUWZR([WUXGHUV

Main Filament choose PLA corresponding ExtruderUp Support Filament choose PVA corresponding ExtruderDown 0DNHVXUHPDWHULDOORDGLQJRQ72<',<LVGRQHLQWKLVZD\

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

&OLFNJHQHUDWHVXSSRUWDQGVHOHFWWKHH[WUXGHU to generate support Adjust model parameters

&OLFNWKHSUHSDUHEXWWRQWRVOLFH7KHQVDYHWKHJHQHUDWHG*FRGHOHLQWR

WKH6'FDUG<RXFDQSULQWLWLQ72<',<'SULQWHU

Note:

:KHQVDYLQJ*FRGHOHSOHDVHXVH(QJOLVKOHQDPH

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

$SSOLFDEOH7RROKHDG/DVHU7RROKHDG

2SHQWKH(FXE:DUHVHOHFWSULQWHUPRGHO72<',<LQ

LPSRUWSLFWXUHV

Image format need to be *.png or *.jpg; The color in the picture must only LQFOXGHEODFNDQGZKLWHRWKHUZLVHZLOODHFWWKHHQJUDYLQJHHFW

6HWWKHLPDJHVL]H

'HSWKLVHTXDOWRWKHOHQJWKRIWKHSLFWXUH$IWHUVHWWLQJWKHOHIWVLGHRIWKHPDLQ

LQWHUIDFHYLHZRIWKHVRIWZDUHDVWKHUHGER[VKRZLQWKHJEHORZ\RXFDQVHW

WKHOHQJWK[D[LVZLGWK\D[LVDQGKHLJKW=D[LVRIWKHJUDSKDJDLQ

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

6HWXSWKHZRUNSLHFHPDWHULDO

Among them Paper Leather three-ply Acrylic 8VHUGHQHG

'LHUHQWPDWHULDOVQHHGGLHUHQW

engraving speed .

6HWWKHWKLFNQHVVRIWKHPDWHULDOXQGHUWHVWDQGWKHODVHUHQJUDYLQJVSHHG

(QJUDYLQJ6SHHG7KHVPDOOHUWKHVSHHGWKHVORZHUWKHHQJUDYHWKHGDUNHUWKH

FRORU

Tip: Do not set the thickness of the workpiece, otherwise there will JHQHUDWHRVHWYDOXHDXWRPDWLFDOO\WKHQFKDQJHWKHODVHU

focal length. This parameter needs to be set Only if the workpiece is not on the platform when the Toolhead returns to zero.

&OLFNWKHSUHSDUHEXWWRQWRVOLFH7KHQVDYHWKHJHQHUDWHG*FRGHOHLQWR

WKH6'FDUG<RXFDQSULQWLWLQ72<',<'SULQWHU

Note:

:KHQVDYLQJ*FRGHOHSOHDVHXVH(QJOLVKOHQDPH

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

$SSOLFDEOH7RROKHDG&1&7RROKHDG

2SHQWKH(FXE:DUHVHOHFWSULQWHUPRGHO72<',<LQ

&1&7RROKHDGVKDOOEHVHOHFWHGIRU&1&&DUYLQJ,IWKHRWKHUKHDGDUH

VHOHFWHGWKHSULQWHG*FRGHZLOOUHWXUQHUURUPHVVDJH

,PSRUWSLFWXUHV

,PDJHIRUPDWQHHGWREH SQJRU MSJ7KHFRORULQWKHSLFWXUHPXVWRQO\LQFOXGH

EODFNDQGZKLWHRWKHUZLVHZLOODHFWWKHHQJUDYLQJHHFW

6HWWKHLPDJHVL]H

'HSWKLVHTXDOWRWKHOHQJWKRIWKHSLFWXUH$IWHUVHWWLQJWKHOHIWVLGHRIWKHPDLQ

LQWHUIDFHYLHZRIWKHVRIWZDUHDVWKHUHGER[VKRZLQWKHJEHORZ\RXFDQVHW

WKHOHQJWK[D[LVZLGWK\D[LVDQGKHLJKW=D[LVRIWKHJUDSKDJDLQ

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Set the depth of CNC Craving and milling 7KHODUJHUWKHQXPEHUWKHGHHSHUWKHFDUYLQJWKHGHSWKUDQJHLVPP

'HSWKRIPDWHULDOXQGHUWHVWPPV7KHODUJHUWKHQXPEHUWKHGHHSHUWKH

FDUYLQJ

Note:

:KHQVDYLQJ*FRGHOHSOHDVHXVH(QJOLVKOHQDPH

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Other function

View shows

(QWLW\YLHZ

'HVFULSWLRQ'LVSOD\WKHHQWLW\RIWKHPRGHOLQWXLWLYHO\RHUPXOWLDQJOHREVHUYDWLRQ

7KHGHIDXOWYLHZLQWKHVRIWZDUHLV6ROLGYLHZDQGHDFKYLHZLVVZLWFKWKURXJKWKH

EXWWRQVLQWKHIROORZLQJUHGDUHD

X-ray display

'HVFULSWLRQ&DQSHUVSHFWLYHPRGHOREVHUYHWKHLQWHUQDOVWUXFWXUHRIWKHPRGHO

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

/D\HUVKRZV

'HVFULSWLRQ2EVHUYHHDFKOD\HURIWKHPRGHOLQFOXGLQJFRORUVSHHGOOLQJDQG

support

Routing type display

Speed display

---------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Layer density display

Drag the slider to display

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Model color Settings

Same materials multi-color display

'HVFULSWLRQHDV\WRREVHUYHWKHPXOWLFRORUPRGHO

E(GLWFRORUV

'HVFULSWLRQFUHDWHODPHQWW\SH

---------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Edit the color

Activate the color

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

7ZRFRORUGLVSOD\IRUGLHUHQW)LODPHQWV

Set the Filaments

'HVFULSWLRQWKHPDWHULDOW\SHVRIWKHWZRH[WUXGHUVDUHGLHUHQWDQG

QHHGWREHVHWVHSDUDWHO\

-----------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

*RWRWKHFRORUHGLWRU

(GLWODPHQWFRORU

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

--------------------------------------------------------------------------------------------------------------------------------------------

Language Settings

7KH(FXE:DUHVXSSRUWVPXOWLODQJXDJH6HWWLQJVZLWK(QJOLVKDVWKH

GHIDXOW7KHODQJXDJHVHWWLQJPHWKRGLVDVIROORZV

2SHQ3UHIHUHQFHV&RQJXUH(FXE:DUH

/DQJXDJHVHOHFWLRQ

5HERRWWKH(FXE:DUHWRLPSOHPHQWWKHODQJXDJHVZLWFK

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

-------------------------------------------------------------------------------------------------------------------------------------------

Print parameter setting Description: the setting of printing parameters is mainly used for FDM printing. Laser Engraving and CNC Craving will not display the setting interface. Recommended Settings

0RGHOVHOHFWLRQ72<',<LQ72<',<IRU)'0'XDO7RROKHDGRQO\

72<',<LQ8VHGIRU)'0BVLQJOHSULQW/DVHU(QJUDYLQJDQG&1&

Craving

72<',<IRU)'0'XDO7RROKHDGRQO\8VHGIRU)'0'XDOSULQW

)LODPHQWVHOHFWLRQ

72<',<LQ6HOHFWWKHFRUUHVSRQGLQJIXQFWLRQVXFKDV)'0/DVHURU

&1&

5HFRPPHQGHG6HWWLQJV4XLFNO\VHWFRPPRQSDUDPHWHUV D/D\HUKHLJKWPPSULQWVORZPPSULQWIDVW

E)LOOUDQJH

F*HQHUDWHVXSSRUW

G7KHSULQWLQJSODWIRUPLVDWWDFKHG:KHQVHOHFWHGUDIWLVXVHGE\GHIDXOW

3ULQWVSHHG 5HFRPPHQGHG6SHHG(QWHUWDNHVHHFWDIWHUVHWWLQJ

3ULQWWHPSHUDWXUH 5HFRPPHQGHG7HPSHUDWXUH7KHWHPSHUDWXUHRIWKH

7RROKHDGLVVHWDQGHQWHUZLOOWDNHHHFW

3ODWIRUPWHPSHUDWXUH 5HFRPPHQGHG7HPSHUDWXUH7KHWHPSHUDWXUHRI

the printing platform makes the

PRGHOVWLFNWRWKHRRU

-----------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

-------------------------------------------------------------------------------------------------------------------------------------------

Custom Settings (advanced Settings)

0RGHOVHOHFWLRQ72<',<LQ72<',<IRU)'0'XDO7RROKHDGRQO\

72<',<LQ8VHGIRU)'0BVLQJOHSULQW/DVHU(QJUDYLQJDQG&1&

Craving

72<',<IRU)'0'XDO7RROKHDGRQO\8VHGIRU)'0'XDOSULQW

)LODPHQWVHOHFWLRQ

72<',<LQ6HOHFWWKHFRUUHVSRQGLQJIXQFWLRQVXFKDV)'0/DVHURU

&1&

&XVWRP6HWWLQJV

&RQILJXUDWLRQILOHV'UDIWDQGILQH6HWWLQJV'UDIWLVJHQHUDOVHWWLQJSULQW

OD\HUKHLJKWLVPPQHLVQHVHWWLQJSULQWOD\HUKHLJKWLVPP

ETXDOLW\6HWWKHOD\HUKHLJKW

FWKHVKHOO6HWWKHZDOOWKLFNQHVVDQGWKHERWWRPDQGERWWRPWKLFNQHVV

GOO6HWWKHOOGHQVLW\

HPDWHULDO6HWSULQWLQJWHPSHUDWXUHSODWIRUPWHPSHUDWXUHPDWHULDOGLDPHWHU

DQGRZUDWH

IVSHHG6HWSULQWVSHHGDQGLGOHVSHHG

JFRRO:KHWKHUWRWXUQRQSULQWFRROLQJ

KVXSSRUW6HWVXSSRUWSRVLWLRQ

LDWWDFKPHQWRISULQWLQJSODWIRUP6HWWKH5DIWW\SHRIWKHSULQWLQJSODWIRUP

DWWDFKPHQW7KHGHIDXOWLV5DIW

MGRXEOHH[WUXVLRQ)LOOLQJWRZHUVHWWLQJXVHGIRUGRXEOHFRORURUGRXEOHPDWHULDO

SULQWLQJHUDVHWKHH[FHVVFRQVXPDEOHV

NVSHFLDOPRGH3ULQWDWWKHVDPHWLPHDOOPRGHOVRQWKHERWWRPSDQHODUH

SULQWHGOD\HUE\OD\HUDQGLQOLQHRQHPRGHORQWKHERWWRPSDQHOLVSULQWHG

DQGWKHQDQRWKHUPRGHOLVSULQWHG

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Equipm ent m aintenance

-------------------------------------------------------------------------------------------------------------------------------------------

1.Maintenance and cleaning of guide rail 7KLVSURGXFW86(6WKHVWDLQOHVVVWHHOJXLGHUDLOXVHGLQWKHQRUPDOHQYLURQPHQW

GHJUHHVWHPSHUDWXUHaKXPLGLW\ZLOOQRWJHWUXVW\,QRUGHUWR

HQVXUHWKHEHWWHUSHUIRUPDQFHRIWKHJXLGHUDLOLWLVQHFHVVDU\WRFRDW;<=WKUHH

OLQHDUJXLGHUDLOZLWKOXEULFDWLQJRLOUHJXODUO\XVXDOO\PRQWK

$IWHUXVLQJWKH&1&IXQFWLRQWKHUHPD\EHVZDUIRQWKHJXLGHUDLOSOHDVH

FOHDQHGXSZLWKDEUXVKLPPHGLDWHO\RWKHUZLVHZLWKUDLOPRYHPHQWWKHVZDUILV

YHU\HDV\WRGDPDJHWKHJXLGHUDLO

2. Maintenance of printing platform 7KLVSURGXFW86(6WKHKHDWLQJOPPHWDOSODWIRUPVRIWPDJQHWSODWHVWLFNHU

RUGHUIURPERWWRPWRWRSFRPELQHWRSULQWLQJSODWIRUPVWLFNHULVRQHRIWKH

FRQVXPDEOHVDIWHUXVLQJORQJWLPHWKHUHZLOOEHGHIRUPDWLRQGDPDJHQRW

VWLFN\HWFLWQHHGVWREHUHSODFHGDFFRUGLQJWRWKHFRQGLWLRQLQRUGHUWRHQVXUH

EHWWHUSULQWHHFW7KHUHSODFHPHQWRQO\QHHGVWREHUHPRYHGIURPWKHVRIW

PDJQHWSODWHDQGD[HGDJDLQ

,QGDLO\XVHWKHGLVWDQFHEHWZHHQWKH)'0QR]]OHDQGWKHSULQWLQJSODWIRUP

should be reasonably set to prevent the nozzle from burning the stickers GLUHFWO\RUHYHQWKHVRIWPDJQHWSODWH$IWHUSULQWLQJLIWKHUHDUHVWLOOUHVLGXDO

PDWHULDOVRQWKHVWLFNHUWKHVWLFNHUVXUIDFHVKRXOGEHFOHDQHGXSDQGWLG\E\

VFUDSLQJZLWKDEODGH

:KHQWDNLQJWKHPRGHOWU\WRUHPRYHWKHPRGHODIWHUFRROLQJWKHSODWIRUP

EHIRUHEHQGLQJWKHVRIWPDJQHWLFSODWH(YHU\WLPHEHQGLQJWKHVRIWPDJQHWLF

SODWHVKRXOGEHEHQWLQWKHVDPHGLUHFWLRQGRQRWUHSHDWHGO\EHQGLQJLQGLHUHQW

GLUHFWLRQVWKLVZLOOOHDGWRWKHVRIWPDJQHWLFSODWHEURNHQ

3.CNC plate

&1&&DUYLQJ5DIWLVPDGHRI39&H[SDQVLRQVKHHW,WLVXVHGWRSDGEHWZHHQ

WKHPHWDOSODWIRUPDQGWKHZRUNSLHFHGXULQJ&1&FDUYLQJWRSUHYHQWWKH&1&

Toolhead from hitting the metal platform and causing damage to the metal SODWIRUPRU&1&7RROKHDGLWVHOI&1&&DUYLQJ5DIWLVDFRQVXPDEOHDQGXVXDOO\

LWGRHVQRWQHHGWREHUHSODFHGIRUSURSHUXVH

4.Laser Toolhead life

/DVHU7RROKHDGDUHFRQVXPDEOH,QQRUPDOHQYLURQPHQWWHPSHUDWXUHWR

GHJUHHVKXPLGLW\WRWKHVHUYLFHOLIHLVKRXUV7KHODVHUKDV

DZDYHOHQJWKRIQPPZSRZHUDQGDZRUNLQJYROWDJHLV9'RQRW

WRXFKWKHODVHUZKHQLWLVZRUNLQJ.HHSLWLQDGU\DQGGXVWIUHHVHDOHGEDJRU

ER[DIWHUGDLO\XVH

&1&7RROKHDGOLIH

&1&7RROKHDGLVFRQVXPDEOHV,QQRUPDOHQYLURQPHQWWHPSHUDWXUHWR

GHJUHHVKXPLGLW\WRWKHVHUYLFHOLIHLVKRXUV&1&PRWRU

86(6FDUERQEUXVKGFPRWRUWKHPD[LPXPSRZHULVDERXW:'2127

WRXFKZKHQ&1&WRROKHDGZRUNLQJRUREVHUYLQJ&1&ZRUNPDNHVXUH\RX

ZDUHVDIHW\JODVVHV7KHWRROKHDGLVFRQQHFWHGWRWKH&1&WRROWKURXJKD

FRXSOLQJ:KHQUHSODFLQJWKHWRROEHVXUHWRWLJKWHQWKHPHWHUVFUHZRQWKH

FRXSOLQJWRSUHYHQWWKHWRROIURPIDOOLQJ

---------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

Com m on faults

-------------------------------------------------------------------------------------------------------------------------------------------

1.Unable to start-up 3KHQRPHQRQDIWHUSOXJJLQJLQWKHSRZHUWXUQRQWKHSRZHUEXWWRQ7KHLQGLFDWRUOLJKWLVQRWOLJKWHQ

XSDQGWKHVFUHHQLVQRWOLJKWHQXSDOVR

5HDVRQFKHFNWKLVSKHQRPHQRQXVXDOO\PHDQVWKHUHLVQRSRZHURQWKHZKROHPDFKLQHSOHDVH

FKHFNZKHWKHUWKHSRZHUDGDSWHUOLJKWLIWKHUHLVQROLJKWSOHDVHFKHFNZKHWKHUWKHFLW\SRZHUVRFNHW

LVZRUNLVZRUNLQJRUQRW,IWKHSRZHUODPSLVRQFKHFNWKDWWKHSRZHUDGDSWHULVSOXJJHGLQWRWKH

GHYLFH

6ROXWLRQUHSODFHWKHSRVLWLRQRIWKHSRZHUVRFNHWDQGUHSOXJWKHFRQQHFWLRQEHWZHHQWKHSRZHU

DGDSWHUDQGWKHGHYLFHWRHQVXUHWKDWWKHSOXJLVWLJKW

6FUHHQRZHUVFUHHQZKLWHVFUHHQQRGLVSOD\

3KHQRPHQRQ$IWHUSRZHURQWKHVFUHHQOLJKWXSEXWGLVSOD\FRQWHQWLVQRWQRUPDOVXFKDVZKLWH

VFUHHQRUGLVSOD\FRUUXSWLRQ

5HDVRQFKHFN7KLVSKHQRPHQRQLVXVXDOO\FDXVHGE\XQVWDEOHFXUUHQWRUHOHFWURPDJQHWLF

LQWHUIHUHQFHDURXQG

6ROXWLRQUHERRWWKHGHYLFH VSRZHU0DNHVXUHWKHUHDUHQRODUJHHOHFWURPDJQHWLFVRXUFHVDURXQG

3.Temperature display alarm 3KHQRPHQRQDIWHUSRZHURQ(UU0$;0,17(0335,17(5+$/7('3OHDVHUHVHW 5HDVRQFKHFNWKHWKHUPLVWRULQWKH7RROKHDGLVGDPDJHGRUQRWLQVHUWWKH7RRO+HDG)ODW&DEOH 6ROXWLRQUHERRWWKHHTXLSPHQWDQGUHSOXJWKH7RROKHDGOLQHWRFRQUPWKLVSKHQRPHQRQ,ILWLVVWLOO

WKHVDPHDIWHUUHERRWLWLQGLFDWHVWKDWWKHWKHUPLVWRUKDVEHHQGDPDJHGDQGQHHGVWREHUHSODFHG

4.SD card contents cannot be read 3KHQRPHQRQDIWHUSRZHURQWKH6'FDUGFDQQRWEHUHDGZKHQWKH6'FDUGLVLQVHUWHGIRUSULQWLQJ

5HDVRQFKHFN0DNHVXUHWKH6'FDUGLVLQVHUWHGLQWKHULJKWGLUHFWLRQDQGWKHQUHLQVHUWDQGXQSOXJ

WKH6'FDUG,ILWFDQQRWEHGLVSOD\HGUHIRUPDWLWDQGLQVHUWLWDJDLQ3OHDVHHQVXUHWKDWWKH6'FDUG

KDVDJFRGHOHWKHQDPHRIZKLFKLVLQ(QJOLVK

6ROXWLRQUHLQVHUWDQGXQSOXJWKH6'FDUG,ILWVWLOOFDQQRWEHVROYHGUHSODFHWKH6'FDUG

7KHPHQXVZLWFKWRROKHDGHUIXQFWLRQFDQQRWEHDFWLYDWHG 3KHQRPHQRQDIWHUFKDQJLQJWKH7RROKHDGLQWKHPHQXRIWKHVFUHHQLWVWLOOQRWFKDQJHDIWHU

UHERRWLQJWKHGHYLFH

5HDVRQFKHFNZKHQWKH7RROKHDGLVVHOHFWHGIURPWKHPHQXLWZLOOWDNHVRPHWLPHWRFKDQJHWKH

UPZDUHSURJUDPZLWKLQWKHV\VWHP,WLVUHFRPPHQGHGWRFOLFNRNDWWKHODVWVWHSDQGZDLWIRUPRUH

WKDQVHFRQGVEHIRUHUHERRWWKHGHYLFH

6ROXWLRQGRLWDJDLQWRHQVXUHWKDWWKHZDLWIRUYDOLGDWLRQLVPRUHWKDQVHFRQGV

6.Cannot return to zero (X, Y, impact cannot return to zero, Z cannot return to zero) 3KHQRPHQRQ:KHQWKHDXWRKRPHRSHUDWLRQLVSHUIRUPHGRUWKHV\VWHPDXWRKRPHEHIRUHSULQWLQJD

FHUWDLQD[LVFDQQRWEDFNWR]HURXVXDOO\WKHUHZLOOEHDVWURQJNUNUVRXQG

5HDVRQFKHFN:KHQUHWXUQLQJWR]HURFKHFNRXWZKHWKHUWKHHQGVWRSLVWULJJHUHGLIWKHHQGVWRS

LVWULJJHUHGWKHLQGLFDWRUOLJKWZLOOEHEULJKWDWUVW,IWKHLQGLFDWRUOLJKWLVQRWOLJKWLWPHDQVWKDWWKH

HQGVWRSLVQRWWULJJHUHGRUWKHHQGVWRSOLQHLVQRWSOXJJHGWLJKWO\,WLVQHFHVVDU\WRUHSOXJWKHHQGVWRS

WRHQVXUHWKDWWKHHQGVWRSZRUNVQRUPDOO\

6ROXWLRQ0DNHVXUHWKHHQGVWRSFDQEHWULJJHUHGQRUPDOO\DQGWKHUHGOLJKWZLOOEHRQZKHQLWLV

WULJJHUHGRWKHUZLVHWKHHQGVWRSPD\EHGDPDJHG

7.Automatic reboot 3KHQRPHQRQ:KHQWKHDXWRKRPHLVSHUIRUPHGWKHGHYLFHZLOOUHERRWDXWRPDWLFDOO\DIWHUWKH

DXWRKRPHLVFRPSOHWHG

5HDVRQFKHFN(QVXUHWKHQRUPDOFRQQHFWLRQRI7RROKHDGOLQH2EVHUYHWKHDXWRKRPHSURFHVVRIWKH

GHYLFH,IWKHDXWROHYHOLQJSUREHRQWKH7RROKHDGLVQRWSUHVVHGRUOLIWHGQRUPDOO\WKHV\VWHPZLOO

GHWHUPLQHWKHDEQRUPDOLW\DQGUHERRW

6ROXWLRQ5HPRYHWKH7RROKHDGWRFKHFNZKHWKHUWKHSUHVVGRZQDQGXSRIWKHDXWRPDWLFOHYHOLQJ

PHFKDQLVPRIWKH7RROKHDGLVVPRRWK,IWKHUHLVREYLRXVVWXFNSOHDVHFKHFNWKHGLVDVVHPEO\WXWRULDO

RIWKH7RROKHDG

=RVHWVHWWLQJLVQRWVXFFHVVIXO7KHUVWOD\HULVVRFORVHRUVRIDU

to the platform

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

-------------------------------------------------------------------------------------------------------------------------------------------

3KHQRPHQRQ:KHQ)'07RROKHDGLVSULQWHGWKHUVWOD\HULVVRFORVHRUVRIDUWRWKHSULQWLQJSODWIRUP

5HDVRQFKHFN:KHQWKHHTXLSPHQWOHDYHVWKHIDFWRU\ZHZLOOVHWDQDSSURSULDWH=RVHWYDOXHEXWZKHQ

WKHHTXLSPHQWKDUGZDUHLVUHSODFHGUHPRYHDQGDVVHPEOHWKH=RVHWYDOXHPD\FKDQJHDFFRUGLQJO\

*HQHUDOO\ZKHQ)'0SULQWVWKHUVWOD\HULIWKHQR]]OHLVWRRIDUDZD\IURPWKHSODWIRUPWKH=RVHWYDOXH

QHHGVWREHUHGXFHGIRUH[DPSOHIURPPPWRPP:KHQ)'0SULQWVWKHUVWOD\HUWKHQR]]OHLV

WRRFORVHWRWKHSODWIRUPVRWKDWWKHWKUHDGFDQQRWEHH[WUXGHG,QWKLVFDVHWKH=RVHWYDOXHQHHGVWR

EHLQFUHDVHGIRUH[DPSOHIURPPPWRPP

6ROXWLRQ$GMXVW=RVHWYDOXHDSSURSULDWHO\

9.The Toolhead can not be reset after changing 3KHQRPHQRQ$IWHUWKHFKDQJHWRROKHDGWKH;D[LVFDQQRWUHWXUQWR]HURQRUPDOO\ZKHQWKHGHYLFH

DXWRKRPHDQGWKHGHYLFHUHERRWDEQRUPDOO\RUWKH;D[LVOLPLWVZLWFKFDQQRWEHKLW

5HDVRQFKHFNPDNHVXUHWKHFRQQHFWLRQRIWRROKHDGDWFDEOHLVQRUPDO%HVLGHVEHFDXVHHDFKWRROKHDG

KDVDFHUWDLQVL]HGHYLDWLRQLQWKHSURGXFWLRQSURFHVVLWZLOOFDXVHDFHUWDLQGHYLDWLRQLQWKHUHWXUQWR]HUR

SRVLWLRQRIWKH;D[LV,IWKLVVLWXDWLRQRFFXUVGXULQJWKHKHDGFKDQJLQJLWQHHGVWRQHWXQHWKH[HG

SRVLWLRQRIWKH[HQGVWRSWRDGMXVWDQGWULJJHUWKHKRPHSRVLWLRQRIWKH;D[LV

6ROXWLRQ$GMXVWWKHSRVLWLRQRIWKHRYDOSRVLWLRQLQJKROHRIWKH;HQGVWRSWRFKDQJHWKHSRVLWLRQRIWKH

HQGVWRSDQGPDWFKWKH]HURSRVLWLRQRIGLHUHQW7RROKHDGV

10.FDM failed to feed/unscrew, plug 3KHQRPHQRQ:KHQVHOHFWLQJWKHIXQFWLRQRIORDGODPHQWXQORDGODPHQWWKHUHLVQRODPHQWH[WUXGHG

RUODPHQWXQORDGLQWKHQR]]OH

5HDVRQFKHFNLWLVQHFHVVDU\WRVHWDQDSSURSULDWHORDGRUXQORDGWHPSHUDWXUHHQVXUHWKDWWKHORDG

RUXQORDGWHPSHUDWXUHRI3/$PDWHULDOLVDERYHGHJUHHV$IWHUWKHWHPSHUDWXUHVHWWLQJLVZRUNWKH

H[WUXGHURQWKHEDFNRI72<',<FDQEHFKHFNHGIRUQRUPDOURWDWLRQDIWHUKHDWLQJ,IQRWWKHH[WUXGHULV

DEQRUPDO,IWKHH[WUXGHULVZRUNLQJQRUPDOO\DQGPDNHVDWDWDWDVRXQGLWLVDVSULQNOHUSOXJ

6ROXWLRQ,IDMDPDSSHDUVFKHFNRXWWKHQR]]OHGLVDVVHPEO\WXWRULDO

)'0SULQWUVWOD\HUQRQVWLFNEDVHSODWH 3KHQRPHQRQ,Q)'0'SULQWLQJWKHUVWOD\HULVDOZD\VXQVWXFNDQGZDUSHG

5HDVRQFKHFN/LPLWHGE\WKHSRZHUDQGVL]HRIWKHZKROHPDFKLQH72<',<FDQQRWSULQW$%6PDWHULDO

8VXDOO\LIWKHUHLVQRODUJHSODQHDWWKHERWWRPRIWKHPRGHOLWLVUHFRPPHQGHGWRSULQWUDIW:KHQSULQWLQJ

3/$PDWHULDOLWLVUHFRPPHQGHGWRVHWWKHEDVHSODWHWHPSHUDWXUHWR&RDWLQJWKHSULQWLQJSODWIRUPZLWK

VROLGJOXHZLOOEHJRRGWRERQGLQJWKHPRGHODQGWKHEDVHSODWH

6ROXWLRQ)ROORZWKHUHFRPPHQGHGWRVHWPRGHOSDUDPHWHUVDQGWKHHHFWRIXVLQJVROLGJOXHLVYHU\

LGHDO

12.Laser Engraving in the printing process points of light is very large, did not carve out the pattern 3KHQRPHQRQ:KHQXVLQJWKH/DVHUHQJUDYLQJIXQFWLRQ\RXFDQVHHWKDWWKHODVHULVRSHQZLWK

SKRWRHOHFWULFLW\EXWWKHVSRWRIOLJKWLVYHU\ELJDQGQRSDWWHUQLVFDUYHG

&DXVHLQYHVWLJDWLRQZKHQWKHGLVWDQFHEHWZHHQWKHODVHUDQGWKHZRUNSLHFHVXUIDFHLVWKHIRFDOOHQJWK

WKHOLJKWVSRWLVDYHU\VPDOOSRLQW:KHQLW VQRWLQIRFXVLW VDELJGRW

6ROXWLRQ'HWHUPLQHWKHUHDVRQWKHSULQWLVQRWLQIRFXV3OHDVHSODFHWKHSURFHVVHGREMHFWEHIRUHSULQWLQJ

7KH/DVHU7RROKHDGZLOOGHWHFWWKHWKLFNQHVVRIWKHSURFHVVHGREMHFW,IWKHZRUNLVQRWSODFHGZKHQWKH

/DVHU7RROKHDGLVVHWWR]HURDIWHUWKHVWDUWRISULQWLQJWKHZRUNWKLFNQHVVPXVWEHVSHFLHGZLWKWKHZRUN

WKLFNQHVVSDUDPHWHULQ(FXE:DUH6HHLQVWUXFWLRQVIRUYLGHRRULQVWUXFWLRQVIRU/DVHUSULQWLQJVHFWLRQ,ILW

LVGHWHUPLQHGWKDWLWZLOOEHSHUIRUPHGDVUHTXLUHGDQGLILWLVVWLOOXQDEOHWRIRFXVWKHIRFDOOHQJWKQHHGVWR

EHDGMXVWHG5HIHUWRWKHFRUUHVSRQGLQJFKDSWHUIRUVSHFLFPHWKRGV

13.CNC Craving and milling in the printing process, part of the processing pattern, another part of the processing pattern 3KHQRPHQRQ&1&FUDYLQJDQGPLOOLQJSURFHVVLQJSURFHVVLQJVXUIDFHLQVRPHSODFHVKDYHWUDFHVVRPH

SODFHVGRQRW

5HDVRQFKHFNEHFDXVHRIWKHFXWWHUDQGSURFHVVLQJVXUIDFHLVQRWOHYHOVRSDUWFDQQRWEHSURFHVVHG

6ROXWLRQ&1&FDUYLQJZDVKLQJIXQFWLRQDWWKHWLPHRIXVHWKHSULQWHULVXQDEOHWRUHDOL]HDXWRPDWLF

OHYHOLQJIXQFWLRQXVHUVQHHGLQSUHSDULQJSURGXFWLQVWDOODWLRQVHWSURFHVVLQJRULJLQMXGJLQJE\PRYLQJWKH

;<SODQHRIWKHPDFKLQHGSDUWDQGWRROOHYHOGHJUHHLQWKHERWWRPRIWKHORZHUSDUWE\LQFUHDVLQJWKHPDW

WRDGMXVWSURFHVVLQJVXUIDFHOHYHOGHJUHH3OHDVHUHIHUWRWKHVHFWLRQRI&1&FUDYLQJLQWKHPDQXDOIRU

GHWDLOV

------------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------

-

-

-

-

-

-

-

-

FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

 

 

Page 1 of 5 Report No.: STS1906052 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS FCC ID:2ATO4TOYDIY4IN1PLUS Model Name:TOYDIY 4IN1 PLUS Photo 1 Photo 2 Photo 3 Page 2 of 5 Report No.: STS1906052 Photo 4 Page 3 of 5 Report No.: STS1906052 Photo 5 Photo 6 Page 4 of 5 Report No.: STS1906052 Photo 7 Photo 8 Page 5 of 5 Report No.: STS1906052 Photo 9 Photo 10

 

 

Page 1 of 7 Report No.: STS1906052 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS FCC ID:2ATO4TOYDIY4IN1PLUS Model Name:TOYDIY 4IN1 PLUS Photo 1 Photo 2 WIFI Antenna Photo 3 Page 2 of 7 Report No.: STS1906052 Photo 4 Page 3 of 7 Report No.: STS1906052 Photo 5 Photo 6 Page 4 of 7 Report No.: STS1906052 Photo 7 Photo 8 Page 5 of 7 Report No.: STS1906052 Photo 9 Photo 10 Page 6 of 7 Report No.: STS1906052 Photo 11 Photo 12 Page 7 of 7 Report No.: STS1906052 Photo 13 Photo 14