FEATURES The wireless microphone system comes with Ultra-High Frequency (UHF) and is interference free. Compatible with an array of devices including TV, Smart TV, Blue-Ray player, notebook, iPad, tablet, home theater, receiver, speaker, etc. The portable receiver and audio mixer supports up to two wireless microphones
(included) and two wired microphones (not included). Adjustable echo and tone controls for more Karaoke fun. Easy to set up with up to 8 selectable frequencies and independent volume controls. Up to 100 feet line-of-sight operation range. Perfect for Karaoke, DJ music and house party. NOTE: Please use the receiver 3.5mm out to connect your amplifer/speaker. Receiver Receiver Rear Panel Transmitter Microphone-core Display Frequency adjustment/Power switch Battery Cover Operation 1) Connect the receiver to a power outlet through the power adapter provided and turn on the receiver. 2) Put two alkaline AA batteries into the battery compartment of the microphone. Please ensure the positive and negative ends are positioned in the correct direction 3) Power on the handhold microphone. In case of any frequency interference, quick press the power button on the microphone will be turn to a different frequency. There are up to eight frequencies for you to choose 4) Please note that it will take a few seconds for the receiver to automatically syndicate the frequency with the microphone each time the power button is pressed. If there others one use the same product.please turn off microphone for a second. Then turn on the microphone don;t release untill it flashing. Then quick pressed 5) one time. The will also flashing Then quick turn on the receive within 2 second. The receiver light will change right to blue.this one match the receiver.do the same step for the other one(after match each. If you want use the other microphone.you need do the same step) 6) To connect the receiver to a device such as a computer, TV, and speaker, etc., please refer to the connection diagram section. NOTE:
1. Connect with PC, Streaming device or streaming media player and HDMI blueray and TV 2. Small meeting connection Parameter Specifications Frequency HDMI S/N ratio T.H.D Frequency responses Working Distance Typical Tone Control Spurious Emission Antenna Gain UHF HDMI1.4
-90dB
<0.5%
30Hz-18Khz 100Feet 15dB@10KHz
>60dB PCB Antenna 1.8dBi Trouble Shooting Receiver & Microphone Does not connect If your receiver is showing a red light. It means receiver and microphone not paired correctly. You need to follow the instruction in below to pair receiver with microphones. Turn off both the receiver and the handhold microphone Press the Power buttons dont release until the it flashing.then quick press power key again. then the 2 seconds. After finished the paired. The light will turn to blue. antenna signal flashing . open the receiver within Faint Sound or No sound Check connections to PA system Adjust mic volume Turn on handhold microphone Check that batteries are installed correctly If the battery low change batteries Verify power adapter is plugged securely into the outlet Check that receiver unit is powered on Audio Interference, Artifacts, or Dropouts Identify and remove sources of interference: mobile phones, Wi-Fi access points, signal processors, electronics, etc If the battery low change batteries Move system away from metallic surfaces Provide line-of-sight from handheld microphone or bodypack to receiver unit antennas Distortion Lower Channel volume Change the battery Check fidelity of signal cable to PA If you are still experiencing issues after following this troubleshooting guide.please contact jiuy0211@163.com. In the package KSTATION PRO 1 receiver/mixer 2 handhold wireless microphone 3 power adapter 4 3.5mm-3.5mm audio cable 5 3.5mm-2RCA audio cable 6 user manual Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement it can be used in portable exposure condition without restriction.