!"!
2/-9 6 1 sec. turbo mode Turbo mode: press and hold (+) button for 1 seconds Turbo-Modus: Taste (+) gedrckt halten fr 1 Sekunden Mode Turbo: Appuyez sur la touche et maintenez (+) pendant 1 secondes La modalit Turbo: Tenere premuto il tasto (+) per 1 secondi Turbo: (+) 1 Reim Turbo: stisknte a podrte tlatko (+) po dobu 1 sekund Mantenga pulsado el botn (+) durante 1 segundos: Modo Turbo Turbo+1 Turbo mode: ingedrukt houden (+) knop 1 seconden Turbo mode: Tryk p og hold (+) knappen i 1 sekunder
(+)
+
RED = Charging / GREEN = Fully Charged ROT = Lade / GRN = Voll aufgeladen ROUGE = Se charge / VERT = Compltement charg ROSSO = ricarica / VERDE = Completamente carico RED = / =
ERVEN = nabjen / ZELEN = Pln nabito ROJO = carga / VERDE = Completamente cargado
ROOD = Opladen / GROEN = Volledig opgeladen RD = Opladning / GRN = Fuldt opladet
= / =
4 2
- 1 , - 9
- 9
- 55
- 1
- 93
- 20/49.549.517
"Hot Octopuss products are covered by various global IP rights including copyright, patent applications, patents (including US patent number 8,552,080, 8,900,120 and 5,923,107), and registered designs (including European Community Design Registration No. 002078762). Kentish House 3 Leighton Place London NW5 2QL FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
`
`
`
`
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.