160mm Qi Certied Wireless Charger Instruction Manual General information Please read the following carefully for information on the correct use of this device. For normal operation, no weaker than DC 5V, 2A charger is required. For a fast wireless charging mode, use the Quick Charger 2.0/3.0 compatible charger and compatible smartphones. Package Content
. Wireless Charger
. USB A to Type-C fast charging cable
. User Manual Specications i m m 0 9
. Input: DC 5V,2A/ DC 9V,2A
. Output: DC 5V,1A(5W)/ DC 9V,1.1A(10W)
. Charging Distance6mm
. Certication: Qi Certied Instructions Using the USB A to Type-C cable supplied insert the Type-C connector into the Type-C port on the charger and then insert the standard USB connector
(other end of cable) into any standard USB charging port with a maximum approved power source of 5V,2A or 9V,2A. Place your Qi compatible phone with inductive(wireless) charge feature onto the chargers Charge Plate (back of phone to charger) in either a horizontal or vertical position. The height of the Charge Plate may need to be adjusted to align the Charge Plate with your phones charge area. Using the Height Adjustor button on back of the charger lower or raise the Charge Plate until your phone show it is charging in normal way. Note- only devices which support Qi wireless charge technology can be wirelessly charged from this charger, please check your device specications. i Caution, only connect the charger to an approved charging device with a maximum approved power source of 5V,2A or 9V,2A, otherwise personal injury or device damage may occur. Use either the charging cable supplied with the charger or a certif ed fast charging cable.Do not drop, disassemble or modify this product. Do not expose this product to re or excessive heat. Do not expose this product to water or excessive humidity. Do not put any bare metal on the surface area of the wireless charger when it is operating. i i FCC STATEMENT:
This devicecomplies withPart 15 of the FCCRules. Operationis subject to thefollowing twoconditions:
(1)This devicemay not cause harmful interference, and
(2)This devicemust accept any interferencereceived, including interference that may cause undesiredoperation. Warning:Changes or modications not expressly approvedby the party responsiblefor compliancecould voidthe user's authority to operatethe equipment. NOTE: This equipment has beentested and found to comply withthe limits for aClass B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and canradiate radio frequency energy and, if not installed and used in a ccordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouragedto try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on acircuit dierent from that to which the receiver isconnected. Consult the dealer or an experiencedradio/TV technician forhelp. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.