The Watch JooJooMee Contents:
Watch Micro USB Cable Instruction Manual Warnings :
Do NOT immerse under water Do NOT hold under pouring water Device Features :
Button actions :
Device Charging :
Your device can be charged from any USB 5V supply power. For better preservation of the Li-ion battery we recommend turning your device OFF during charging mode. Connect the USB micro end of the cable to the Watch. Connect the USB type A connector end to a compatible charging station. Note: No charging adaptor is provided with this product. You may use any existing 5V USB charging adaptor. When charging the LEDs will indicate status of the battery charge. Low battery is indicated by flashing Red, medium charge is flashing Orange and a full charge is indicated by solid Green. When the former status is reached unplug your device. It is ready for use. Based on the initial status of the device battery a full charge can take up to 2 hours. Device Setup / Registration :
Before starting to use your device make sure your device is fully charged per the instructions on the previous page. Your device needs to be registered before you can start programming it. Registration can be done by using the JooJooMee APP or visiting the JooJooMee web site per the instructions given below or the following pages. Registration of your device will ensure software upgrades and of password/username recover as well as device theft. implementing features safety case in Scan QR code to take you to the Web address below. or Download our JooJooMee APP as shown on the following page. https://www.joojoomee.com/devices/setup For iOS devices, iPhone / iPAD For Android devices For Desktop/Laptop PCs Chrome Browser Version 32.3.xx iOS, iPhone, iPAD, App Store, text and logos are registered trademarks of Apple Inc. Android , Google Play, Chrome text and logos are registered trademarks of Google Inc. FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or Modifications not expressly approved by the party responsible could void the users authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.