all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 1.19 MiB | September 07 2018 / June 01 2019 | |||
1 2 | Cover Letter(s) | September 07 2018 | ||||||
1 2 | Cover Letter(s) | September 07 2018 | ||||||
1 2 | External Photos | September 07 2018 / June 01 2019 | ||||||
1 2 | Internal Photos | September 07 2018 / June 01 2019 | ||||||
1 2 | ID Label/Location Info | September 07 2018 | ||||||
1 2 | RF Exposure Info | September 07 2018 | ||||||
1 2 | Cover Letter(s) | September 07 2018 | ||||||
1 2 | Cover Letter(s) | September 07 2018 | ||||||
1 2 | Test Report | September 07 2018 | ||||||
1 2 | Test Setup Photos | September 07 2018 / June 01 2019 |
1 2 | User manual | Users Manual | 1.19 MiB | September 07 2018 / June 01 2019 |
a module solution provider WS2119-A0 WS2119-F0 Ultralow Power 915MHz and BLE Wireless MCU Module STM S2-LP with PA & BlueNRG-1 Solution Datasheet Draft 0.7 Prepared By Reviewed By Approved By
--------------------------------------------------------------------------------------------------------------------------------------------------
Copyright JORJIN TECHNOLOGIES INC. 2018 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 Index 1. OVERVIEW ....................................................................................................................................... 3 1.1. GENERAL FEATURES ........................................................................................................................ 3 1.2. MODELS FUNCTIONAL BLOCKS .......................................................................................................... 3 2. FUNCTIONAL FEATURES .................................................................................................................. 4 2.1. MODULE BLOCK DIAGRAM ............................................................................................................... 4 2.2. BLOCK FUNCTIONAL FEATURE ........................................................................................................... 5 BlueNRG-1 : Bluetooth low energy wireless SOC ....................................................................... 5 S2-LP Sub-1Ghz transceiver ......................................................................................................... 5 RFX1010 : Sub-1GHz RF Front-End Module ................................................................................. 6 STSAFE-A1SX : Secure Element ( WS2119-F0 only ) .................................................................... 6 3. MODULE OUTLINE ........................................................................................................................... 7 3.1. SIGNAL LAYOUT (TOP VIEW) ............................................................................................................. 7 3.2. PIN DESCRIPTION ........................................................................................................................... 8 4. MODULE SPECIFICATIONS ............................................................................................................. 10 4.1. ABSOLUTE MAXIMUM RATINGS ...................................................................................................... 10 4.2. ESD RATINGS .............................................................................................................................. 10 4.3. RECOMMENDED OPERATING CONDITIONS ......................................................................................... 10 4.4. POWER CONSUMPTION SUMMARY .................................................................................................. 11 4.5. 2.4GHZ GFSK (BLUETOOTH LOW ENERGY) RF CHARACTERISTICS ......................................................... 12 4.6. SUB-1GHZ RF CHARACTERISTICS .................................................................................................... 12 4.7. INTERNAL 16-MHZ CRYSTAL OSCILLATOR ( FOR BLUENRG-1 ) ............................................................. 13 4.8. INTERNAL 32.768-KHZ CRYSTAL OSCILLATOR ( FOR BLUENRG-1 ) ........................................................ 13 4.9. INTERNAL 50MHZ CRYSTAL OSCILLATOR ( FOR S2-LP ) ....................................................................... 14 4.10. BLUENRG-1 DIGITAL I/O SPECIFICATIONS ....................................................................................... 14 4.11. S2-LP DIGITAL INTERFACE SPECIFICATION ........................................................................................ 15 4.12. RFX1010 DIGITAL INTERFACE SPECIFICATION ................................................................................... 15 4.13. RFX1010 GAIN VS. POUT ........................................................................................................... 16 4.14. RFX1010 CW CURRENT VS. POUT ............................................................................................... 16 4.15. RFX1010 VDET VS. POUT ........................................................................................................... 17 4.16. MORE CHARACTERISTICS.............................................................................................................. 17 5. DESIGN RECOMMENDATIONS ....................................................................................................... 18 5.1. GPIO USAGE OF BLUENRG-1 ........................................................................................................ 18 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 1 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 5.2. POWER VOLTAGE RANGE ............................................................................................................... 18 5.3. DEBUG PORT ............................................................................................................................... 19 5.4. DEBUGGING TIPS .......................................................................................................................... 19 5.5. PRE-PROGRAMMED BOOTLOADER ............................................................................................ 19 5.6. ANTENNA SELECTION GUIDE ........................................................................................................... 20 5.7. REFERENCE SCHEMATIC ................................................................................................................. 21 5.8. MODULE LAYOUT RECOMMENDATIONS ............................................................................................ 21 6. PACKAGE INFORMATION ............................................................................................................... 22 6.1. MODULE MECHANICAL OUTLINE ..................................................................................................... 22 6.2. PACKAGE MARKING ...................................................................................................................... 24 7. SMT AND BAKING RECOMMENDATION ....................................................................................... 25 7.1. BAKING RECOMMENDATION ........................................................................................................... 25 7.2. SMT RECOMMENDATION .............................................................................................................. 25 8. REGULATORY INFORMATION ........................................................................................................ 27 8.1. UNITED STATES ............................................................................................................................ 27 8.2. TAIWAN ...................................................................................................................................... 29 9. HISTORY CHANGE .......................................................................................................................... 30 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 2 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 1. OVERVIEW The WS2119-A0 series is a sub-1GHz with PA and Bluetooth low energy ultralow power wireless MCU module. This module is built-in STM S2-LP and BlueNRG-1 chip. The module is a cost-effective, high performance, ultra-low power, sub-1GHz and Bluetooth low energy RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications. 1.1. General Features STM BlueNRG-1, S2-LP, sub-1GHz PA, 16MHz, 50MHz & 32.768KHz crystals, DC2DC, and U.FL connector on a single module. Stamp-hole 38pins package. Dimension 22mm(L) x 24mm(W) x 2.8mm(H) High performance, ultra-low power Cortex-M0 32-bit Microcontroller Programmable 160 KB Flash 24 KB RAM with retention (two 12 KB banks) Up to +8dBm BLE RF output power, up to +27dBm sub-1GHz RF output power (1) Excellent performance of receiver sensitivity. Up to -88dBm (BLE) and -130dBm (Sub-1GHz). Low Power and Wide I/O Voltage Range: 1.8 to 3.6V
-
Internal DC-DC converter built-in Operating temperature range: -40 C to +85 C
(1) In order to comply with FCC, NCC, Sigfox limits, the maximum RF output power must be reduced. See the 4. MODULE SPECIFICATIONS for details. 1.2. Models Functional Blocks Model BLE & Sub-1GHz Secure Element WS2119-A0 WS2119-F0 V V
-
V ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 3 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 2. FUNCTIONAL FEATURES 2.1. Module Block Diagram DIO pins WS2119-A0 WS2119-F0 WS2119-F0 only ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 4 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 2.2. Block Functional Feature BlueNRG-1 : Bluetooth low energy wireless SOC Bluetooth specification compliant master, slave and multiple roles simultaneously, single-mode Bluetooth low energy SOC Integrated linear regulator and DC-DC step-down converter High performance, ultra-low power Cortex-M0 32-bit based architecture core Programmable 160 KB Flash 24 KB RAM with retention (two 12 KB banks) 1 x UART interface 1 x SPI interface 1 x I2C interface 15 GPIO 2 x multifunction timer 10-bit ADC Watchdog & RTC DMA controller PDM stream processor 16 MHz crystal oscillator built-in. 32 kHz crystal oscillator built-in. Battery voltage monitor and temperature sensor Up to +8 dBm available output power (at antenna connector) Excellent RF link budget (up to 96 dB) BALF-NRG-01D3 BALUN built-in. Accurate RSSI to allow power control S2-LP Sub-1Ghz transceiver Narrow band ultra-low power Sub-1GHz transceiver tuned for 860-943 MHz frequency bands. Suitable for SigFox applications Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK Air data rate from 0.3 to 500 kbps Programmable RF output power up to +27 dBm ( with RFX1010 RF front-end chip) ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 5 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 Excellent performance of receiver sensitivity: down to -130 dBm Programmable RX digital filter Programmable channel spacing Low duty cycle RX/TX operation mode Integrated linear regulator and DC-DC step-down converter RFX1010 : Sub-1GHz RF Front-End Module Integrated PA Integrated LNA with programmable bypass STSAFE-A1SX : Secure Element ( WS2119-F0 only ) Data integrity over the Sigfox network:
- Signature of payloads before uplink
- Signature of payloads before uplink Optional data confidentiality over the Sigfox network:
- Encryption of payloads before uplink
- Decryption of downlink payloads Advanced symmetric cryptography : AES-128 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 6 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 3. MODULE OUTLINE 3.1. Signal Layout (Top View) ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 7 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 3.2. Pin Description Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Table 3-1. Pin Description Pin Name Type Description GND RESETN GND GND Digital Input System reset DIO13 DIO12 TEST DIO11 DIO10 DIO9 DIO8 GND VBAT GND Digital I/O General purpose digital I/O of BlueNRG-1 Connected internally to GPIO3 of S2-LP for interrupt. Digital I/O General purpose digital I/O of BlueNRG-1 Digital Input Test pin put to GND Digital I/O General purpose digital I/O of BlueNRG-1 Digital I/O General purpose digital I/O of BlueNRG-1 Digital I/O General purpose digital I/O of BlueNRG-1 Digital I/O General purpose digital I/O of BlueNRG-1 GND GND POWER Power for BlueNRG-1 GND GND DIO7/BOOT
(1) Digital I/O 14 DIO6 Digital I/O 15 DIO5 Digital I/O 16 DIO4 Digital I/O 17 DIO3 Digital I/O 18 DIO2 Digital I/O Bootloader pin/
General purpose digital I/O of BlueNRG-1 General purpose digital I/O of BlueNRG-1 Connected internally to RESET pin of STSAFE-A1SX General purpose digital I/O of BlueNRG-1 Connected internally to SDA pin of STSAFE-A1SX General purpose digital I/O of BlueNRG-1 Connected internally to SCL pin of STSAFE-A1SX General purpose digital I/O of BlueNRG-1 / SPI master input pin connected internally to SDO pin of S2-LP General purpose digital I/O of BlueNRG-1 / SPI master output pin connected internally to SDI pin of S2-LP General purpose digital I/O of BlueNRG-1 / SPI master 19 DIO1 Digital I/O CS pin connected internally to CS pin of S2-LP 20 DIO0 Digital I/O Built-in pull-up 10K ohm resistor. General purpose digital I/O of BlueNRG-1 / SPI master CLK pin connected internally to SCLK pin of S2-LP ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 8 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 General purpose digital I/O of BlueNRG-1 /
21 DIO14 Digital I/O Connected internally to SDN pin of S2-LP Built-in pull-down 10K ohm resistor. 22 23 24 25 26 27 28 29 ANATEST1 Analog Output Analog output ADC1 GND ADC2 GND Analog Input ADC input1 GND GND Analog Input ADC input2 GND GND VCC_S2LP POWER Power for S2-LP GND GPIO3 GND GND Digital I/O General purpose I/O of S2-LP. Connected internally to DIO13 pin of BlueNRG-1 for interrupt. General purpose I/O of S2-LP. 30 GPIO2 Digital I/O Connected internally to TXEN pin of RFX1010. 31 GPIO1 Digital I/O Built-in pull-down 10K ohm resistor. General purpose I/O of S2-LP. Connected internally to MODE pin of RFX1010. General purpose I/O of S2-LP. 32 GPIO0 Digital I/O Connected internally to RXEN pin of RFX1010. 33 34 35 36 ANT1 ANT2 PA_DET VCC_PA1 VCC_PA2 GND ANT1 ANT2 Built-in pull-down 10K ohm resistor. Analog Output Analog Voltage Proportional to the PA Power Output POWER POWER GND RF I/O RF I/O Power for RFX1010 Power for RFX1010 GND 2.4 GHz BLE antenna connector Sub-1GHz antenna connector
(1) The pin DIO7/BOOT is monitored by bootloader after power up or hardware Reset and it should be low to prevent unwanted bootloader activation. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 9 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 4. MODULE SPECIFICATIONS 4.1. Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) Pin 11, 27 34, 35 Parameter Power for BlueNRG-1 and S2-LP Power for RFX1010 MIN
-0.3 0 3, 4, 5, 6, 7, 8, 9, 13, 14, 15, 16, 17, DC voltage on digital input/output
-0.3 18, 19, 20, 21, 29, pins 22, 23, 25, 30, 31, 32 DC voltage on analog pins
-0.3 DC voltage on digital control pins of 0 PA. Input RF level Input RF level Storage temperature range
-40 ANT1 ANT2 4.2. ESD Ratings Parameter Electrostatic VESD+HBM BlueNRG-1 pins discharge performance VESD+HBM VESD+HBM S2-LP pins RF pins 4.3. Recommended Operating Conditions MAX Unit
+3.9
+4.2
+3.9
+3.9
+3.6
+11
+5
+85 V V V V V dBm dBm C Value Unit 2000 500 500 V V V Parameter Conditions MIN MAX Unit Ambient temperature range VBAT VCC_S2LP VCC_PA1, VCC_PA2(1) For BlueNRG-1 For S2-LP For RFX1010
(1) The VCC_PA1, VCC_PA2 are limited to +3.3V in Sigfox application
-40
+1.7
+1.8
+2.7 85
+3.6
+3.6
+3.6 C V V V ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 10 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 4.4. Power Consumption Summary Ta = 25C, VBAT=3.0 V, VCC_S2LP=3.0 V, VCC_PA = 3.3 V with internal DC-DC converter, unless otherwise noted. Parameter Test Conditions Min Typ Max Units IBAT BlueNRG-1 Supply current Reset Standby Sleep mode: 32 kHz XO ON (24 KB retention RAM) Sleep mode: 32 kHZ RO ON (24 KB retention RAM) Active mode: CPU, Flash and RAM on RX BLE TX +8 dBm BLE TX +4 dBm BLE TX +2 dBm BLE TX -2 dBm BLE TX -5 dBm BLE TX -8 dBm BLE TX -11 dBm BLE TX -14 dBm 5 500 0.9 2.1 1.9 7.7 15.1 10.9 9 8.3 7.7 7.1 6.8 6.6 Peripheral Current Consumption (Adds to core current for each peripheral unit activated) GPIO BlueNRG-1 Flash controller Peripheral System controller current UART SPI Watchdog ADC I2C1 MFT1 MFT2 RTC DMA RNG PKA 11.6 6.3 0.2 82.3 46.5 3.6 6.3 95.9 5.4 6.2 7.5 16.3 21.7 23.7 nA nA A A mA mA mA mA mA mA mA mA mA mA A A A A A A A A A A A A A A ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 11 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 IVCC_ S2LP Shutdown Standby Sleep S2_LP Sleep (FIFOs retained) Supply current Ready RX @ sensitivity level TX CW @ 14 dBm TX CW @ 10 dBm Shutdown Current IVCC_ RFX1010 TX CW @ 24 dBm PA Supply current TX CW @ 27 dBm RX, High Gain Mode RX, Low Gain Mode 2.5 350 600 0.9 350 8 20.6 11.7 1 260 450 16 10 nA nA nA A A mA mA mA A mA mA mA mA 4.5. 2.4GHz GFSK (Bluetooth Low Energy) RF Characteristics RF performance is specified in a single ended 50 ohm reference plane at the U.FL connector with Ta = 25C, VBAT = 3.0 V, fRF = 2440 MHz, unless otherwise noted. Please see the more detail data in the STMs BlueNRG-1 datasheet. Test Conditions Min Typ Max Units Parameter Frequency range Channel spacing Channel center frequency Receiver sensitivity BER = 103 BER = 103 Receiver saturation Maximum Output Power(1) At U.FL connector Minimum Output Power At U.FL connector
(1) The maximum output power in FCC and NCC certification report is 8.66 dBm 4.6. Sub-1GHz RF Characteristics 2400
-
2402
-
2
-87 11
+8
-15 2483.5 MHz
-
2480 MHz MHz dBm dBm dBm dBm RF performance is specified in a single ended 50 ohm reference plane at the U.FL connector with Ta = 25C, VCC_S2LP =
3.3 V, VCC_PA=3.3V, unless otherwise noted. Please see the more detail data in the STMs S2_LP and Skyworkss RFX1010 datasheet. Parameter Frequency range (1) (2) Data rate 2-(G)FSK Test Conditions Min 902 0.3 Typ Max Units
-
-
928 250 MHz kbps ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 12 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 Data rate 4-(G)FSK Data rate OOK/ASK Frequency deviation FDEV Sensitivity @ 920MHz, DR = 0.3 kbps, FDEV = 0.25 kHz, CHF = 1 kHz Low Gain Mode, DR = 1.2 kbps, FDEV = 1.2 kHz, CHF = 4 kHz 1% BER @ 2-GFSK BT = 0.5 DR = 38.4 kbps, FDEV = 20 kHz, CHF = 100 kHz DR = 100 kbps, FDEV = 50 kHz, CHF = 200 kHz Sensitivity @ 920MHz, DR = 4.8 kbps, DEV = 2.4 kHz, CHF = 10 kHz Low Gain Mode, DR = 9.6 kbps, DEV = 4.8 kHz, CHF = 20 kHz 1% BER @ 4-GFSK BT = 0.5 DR = 19.2 kbps, DEV = 9.6 kHz, CHF = 40 kHz Sensitivity @ 920MHz, DR = 0.3 kbps, CHF = 1 kHz Low Gain Mode, 1% BER @ OOK DR = 1.2 kbps, CHF = 4 kHz DR = 38.4 kbps, CHF = 100 kHz DR = 125 kbps, CHF = 250 kHz Maximum Output Power(3) At U.FL connector Minimum Output Power At U.FL connector 0.6 0.3 0.15
-
-
-
-128
-122
-109
-105
-114
-112
-108
-121
-118
-105
-100
+27 0 500 125 500 kbps kbps kHz dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm
(1) The frequency range of Sigfox RC-2 and FCC Part 15.257 is 902.1375MHz to 904.6625MHz
(2) The frequency range of Sigfox RC-4 and NCC is 920.1375MHz to 922.6625MHz
(3) The maximum output power in FCC certification report is 25.29 dBm. The maximum output power in NCC certification report is 24.88 dBm, 4.7. Internal 16-MHz Crystal Oscillator ( for BlueNRG-1 ) over operating free-air temperature range (unless otherwise noted) Parameter Test Conditions Min Typ Max Units Crystal frequency Crystal frequency tolerance(1)
-40 16 MHz
+40 ppm
(1) Includes initial tolerance of the crystal, drift over temperature, aging ( 5 years ). 4.8. Internal 32.768-kHz Crystal Oscillator ( for BlueNRG-1 ) over operating free-air temperature range (unless otherwise noted) Parameter Test Conditions Min Typ Max Units Crystal frequency Crystal frequency tolerance(1)
-40 32.768 KHz 40 ppm
(1) Includes initial tolerance of the crystal, drift over temperature, aging ( 5 years ). ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 13 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 4.9. Internal 50MHz Crystal Oscillator ( for S2-LP ) over operating free-air temperature range (unless otherwise noted) Parameter Test Conditions Min Typ Max Units Crystal frequency Crystal frequency tolerance(1) Without initial frequency calibration Crystal frequency tolerance(2) Initial frequency is calibrated by software
-40
-20 50 40 20 MHz ppm ppm
(1) Includes initial tolerance of the crystal, drift over temperature, aging ( 5 years ).
(2) Includes only drift over temperature, aging ( 5 years ). 4.10. BlueNRG-1 Digital I/O specifications Ta = 25C Parameter Test Conditions Min Typ Max Units 0.1*VDD to 0.9*VDD, CL=50pF 0.9*VDD to 0.1*VDD, CL=50pF 1.4(TC) 1.5(TC) Trise Tfall T(RST)L TC TC1 TC2 VIL VIH VOL VOH IOL TC TC1 TC2 TC TC1 TC2 TC TC1 TC2 TC TC1 TC2 TC (VOL = 0.4V)
-
-
1.5 3.3 2.5 1.8
-
-
-
-
-
-
-
-
-
-
-
-
5.6 6.6 3 19(TC2) 22(TC2)
-
3.6 2.75 1.98 0.9 0.67 0.54 3.6 2.75 1.98 0.4 0.42 0.45
-
-
-
7.9 10.1 5 ns ns ms V V V V V V V V V V V V V V V mA mA mA
-
3 2.25 1.72
-0.3
-0.3
-0.3 1.95 1.46 1.1
-
-
-
2.4 1.72 1.35 3.4 3.8 1.6
(Low drive strength) TC1 (VOL= 0.42V) TC2 (VOL =0.45V) ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 14 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 mA mA mA mA mA mA mA mA mA Units MHz V V V V IOL TC (VOL = 0.4V)
(High drive strength) TC1 (VOL= 0.42V) IOH TC2 (VOL =0.45V) TC (VOH = 2.4V)
(Low drive strength) TC1 (VOH= 1.72V) IOH TC2 (VOH =1.35V) TC (VOH = 2.4V)
(High drive strength) TC1 (VOH= 1.72V) TC2 (VOH =1.35V) 4.11. S2-LP Digital interface specification Parameter Test Conditions 6.8 7.6 3.3 5.5 3.7 1.4 9.9 6.7 2.4 11.2 13.2 6 10.6 7.2 3 19.2 12.9 5.5 15.8 20.1 9.9 17.6 12 5.6 31.7 21.6 10.1 Min VCC_S2LP/2+0.3
-
Typ Max 8
-
-
-
10
-
VCC_S2LP/8 +0.3
-
0.5 IOH = -2.4 mA (-4.2 mA into high 0.625*VCC_S2LP+0.1 output current mode). IOL = +2.0 mA (+4.0 mA into high output current mode). SPI clock frequency VIH VIL VOH VOL 4.12. RFX1010 Digital interface specification Parameter Test Conditions Min Typ Max Units Control Voltage High RXEN, TXEN, and MODE Pins Control Voltage Low RXEN, TXEN, and MODE Pins 1.2
-
VCC_PA 0.3 V V ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 15 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 4.13. RFX1010 Gain vs. Pout Tc = 25C, VCC_PA = 3.3 V 4.14. RFX1010 CW Current vs. Pout Tc = 25C, VCC_PA = 3.3V ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 16 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 4.15. RFX1010 Vdet vs. Pout Tc = 25C, VCC_PA = 3.3 V, Measured with 10k load. 4.16. More Characteristics If you need more detail characteristics, please visit STM and Skyworks web site. BlueNRG-1:
http://www.st.com/content/st_com/en/products/wireless-connectivity/bluetooth-bluetooth-low-e nergy/bluenrg-1.html S2-LP:
http://www.st.com/content/st_com/en/products/wireless-connectivity/sub-1ghz-rf/s2-lp.html RFX1010:
http://www.skyworksinc.com/Product/3212/RFX1010 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 17 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 5. DESIGN RECOMMENDATIONS 5.1. GPIO Usage of BlueNRG-1 Because the function of some pins has been used in the module internally, the other functions of these pins can not be defined. Please refer the below table. Pin Mode 000 Mode 001 Mode 100 Mode 101 Note Name Type Signal Type Signal Type Signal Type Signal DIO0 DIO1 DIO2 DIO3 DIO4 DIO5 DIO6 DIO7 DIO8 DIO9 I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O GPIO 0 GPIO 1 GPIO 2 GPIO 3 GPIO 4 GPIO 5 GPIO 6 GPIO 7 GPIO 8 GPIO 9 DIO10 I/O GPIO 10 DIO11 I/O GPIO 11 DIO12 OD GPIO 12 DIO13 OD GPIO 13 I O O O I O O I O I I I I I UART_CTS UART_RTS PWM0 PWM1 I/O I/O O I SPI_CLK SPI_CS1 SPI_OUT SPI_IN UART_RXD I/O I2C2_CLK UART_TXD I/O I2C2_DAT UART_RTS I/O I2C2_CLK UART_CTS I/O I2C2_DAT UART_TXD I/O SPI_CLK SWCLK SWDIO I O SPI_IN SPI_OUT UART_RXD I/O SPI_CS1
-
I/O I2C1_CLK UART_CTS I/O I2C1_DAT
-
I O O O O I O I
-
-
-
-
-
DIO14 I/O GPIO 14 I/O I2C1_CLK I/O SPI_CLK O 5.2. Power Voltage Range
-
To SCLK pin of S2-LP PDM_DAT To CS pin of S2-LP PDM_CLK To SDI pin of S2-LP
-
To SDO pin of S2-LP PWM0 To SCL pin of STSAFE-A1SX PWM1 To SDA pin of STSAFE-A1SX PDM_DAT To reset pin of STSAFE-A1SX PDM_CLK PDM_DAT
-
-
-
-
-
-
To GPIO3 pin of S2-LP To SDN pin of S2-LP There are 3 key chips in this module, and they have their own separate power pins. In the different I/O level application, we suggest to refer the below power source design. Interface I/O level 3.3V 2.5V 1.8V VBAT 3.3V 2.5V 1.8V Power pin in the WS2119-A0 VCC_S2LP VCC_PA 3.3V 2.5V 1.8V 3.3V 3.3V 3.3V ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 18 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 5.3. Debug Port The BlueNRG-1 embeds the ARM serial wire debug (SWD) port. It is two pins (clock and single bi-directional data) debug interface, providing all the debug functionality plus realtime access to system memory without halting the processor or requiring any target resident code. Pin functionality SWCLK SWDIO Pin Name DIO9 DIO10 Pin description SWD clock signal SWD data signal The Cortex-M0 subsystem of the BlueNRG-1 embeds two breakpoints and one watch point. 5.4. Debugging Tips There are certain situations where debug access is disabled and the chip cannot be accessed, including:
application that disables debug pins application that set the device in sleep or standby state, in which the debug port is not powered. These cases are common during application development and device can end up in a state where debug access is no longer possible. To recover this situation, it is recommended to force DIO7 pin high and hardware reset the device in order to force execution of the updater code. The user can then connect with SWD interface and erase the device Flash memory. 5.5. Pre-programmed bootloader BlueNRG-1 device has a pre-programmed bootloader supporting UART protocol with automatic baudrate detection. Main features of the embedded bootloader are:
Auto baudrate detection up to 460 kbps Flash mass erase, section erase Flash programming Flash readout protection enable/disable The pre-programmed bootloader is an application which is stored on the BlueNRG-1 internal ROM ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 19 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 at manufacturing time by STMicroelectronics. This application allows upgrading the device Flash with a user application using a serial communication channel (UART). Bootloader is activated by hardware by forcing IO7 high during power-up or hardware Reset, otherwise, application residing in Flash will be launched. The customer application must ensure that IO7 is forced low during power up. 5.6. Antenna Selection Guide There are two U.FL connectors to connect one 2.4GHz antenna and one 915MHz antenna. There is an antenna selection guide from STM. You can download it from the below link. http://www.st.com/content/ccc/resource/technical/document/application_note/82/38/3f/9f/fd/4d/4f
/ab/DM00068254.pdf/files/DM00068254.pdf/jcr:content/translations/en.DM00068254.pdf For the FCC and NCC certified antenna types/gain please refer to the following table. Antenna Type Antenna Gain BT LE Sigfox PCB 3.3 dBi Dipole 2.6 dBi PCB 2 dBi Dipole 3.53 dBi The maximum antenna gain allowed for use with this device is 3.3 dBi for BT LE and 3.53 dBi for Sigfox. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 20 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 5.7. Reference Schematic 5.8. Module Layout Recommendations Power Trace Power trace for VCC_PA should be 25mil wide. VBAT and VCC_S2LP traces should be 15mil wide, at least. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 21 http://WWW.JORJIN.COM.TW RESETNRESETNTXDDIO2DIO3ADC1_InputADC2_InputSPI_CLKSPI_SDOSPI_SDII2C_SCLI2C_SDAI2C InterfaceSPI InterfaceDIO8UART InterfaceJTCK-SWTCKJTMS-SWTDIOSWD InterfaceRXDDIO9DIO10DIO11DIO12DIO4DIO5DIO7TEST1ADC1ADC2DIO0DIO12BLE RFSUB-1G RFU1WS2119-A0GND11RESETN2DIO133DIO124TEST5DIO116GND210VBAT11GND312DIO107DIO98DIO89DIO713DIO614DIO515DIO416DIO317DIO218DIO119DIO020DIO1421TEST122ADC123GND424ADC225GND526VCC_S2LP27GND628GPIO329GPIO230GPIO131GPIO032PADET33VCC_PA134VCC_PA235GND836A1A1A2A2TEST POINT1VCC_S2LPVCC_PAVBATDIO7100K DOC No: WS2119-A0A-DTS-D07 6. PACKAGE INFORMATION 6.1. Module Mechanical Outline Top View Side View Note:
A: Typical: 2.8mm, Maximum: 3.0mm Unit: mm Tolerance: +/- 0.2mm ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 22 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 Bottom View Note:
1> Pad tolerance as +/-30um 2> Unit: mm ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 23 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 6.2. Package Marking Model:WS2119-A0 LTC:YYWWSSFX FCC ID:WS2-WS2119A0 CCAI18LP0960T9 Marking Description Brand name: JORJIN WS2119-A0 or Model name WS2119-F0 YYWWSSFX Lot Trace Code: YYWWSSFX YY= Digit of the year, ex: 2017=17 WW= Week (01~52) SS= Serial number from 01~98 match to MFGs lot number, or 99 to repair control code F= Reverse for internal use X = A for Module version WS2-WS2119A0 FCC ID NCC compliance mark, and ID NCC ID of WS2119-A0 : CCAI18LP0960T9 NCC ID of WS2119-F0 : CCAI18LP096AT1 Sigfox P1 certified logo ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 24 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 7. SMT AND BAKING RECOMMENDATION 7.1. Baking Recommendation Baking condition
-
-
Follow MSL Level 4 to do baking process. After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be a) Mounted within 72 hours of factory conditions <30C/60% RH, or b) Stored at <10% RH.
-
Devices require bake, before mounting, if Humidity Indicator Card reads >10%
If baking is required, Devices may be baked for 8 hrs. at 125 C. 7.2. SMT Recommendation Recommended Reflow profile H No. Item Temperature (C) 1 2 3 Pre-heat Soldering D1: 140 ~ D2: 200 D2: = 220 Peak-Temp. D3: 250 C max Time (sec) T1: 80 ~ 120 T2: 60 +/- 10 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 25 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 Note: (1) Reflow soldering is recommended two times maximum.
(7) Add Nitrogen while Reflow process SMT solder ability will be better. Stencil thickness 0.1~ 0.13 mm (Recommended) Soldering paste (without Pb) Recommended SENJU N705-GRN3360-K2-V can get better soldering effects. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 26 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 8. REGULATORY INFORMATION This section outlines the regulatory information for the following countries:
United States Taiwan 8.1. United States Federal Communications Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 27 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling:
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID:WS2-WS2119A0. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 28 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 8.2. Taiwan The WS2119-A0 is certified as a module with type certification number CCAI18LP0960T9. The WS2119-F0 is certified as a module with type certification number CCAI18LP096AT1. End product can display the certification label of the embedded module.
: CCAI18LP0960T9 or
: CCAI18LP096AT1 The user's manual should contain following warning (for RF device) in traditional Chinese:
WS2119-A0 :
WS2119-F0 :
CCAI18LP0960T9 CCAI18LP096AT1 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 29 http://WWW.JORJIN.COM.TW DOC No: WS2119-A0A-DTS-D07 9. HISTORY CHANGE Date 2017/03/20 2017/05/02 2017/07/18 2017/07/31 Description Product Preview Add Pin Description Change PA chip to RFX1010 Modify block diagram Add :
4. MODULE SPECIFICATIONS 5. DESIGN RECOMMENDATIONS 7. SMT AND BAKING RECOMMENDATION 2018/03/02 2018/03/21 2018/07/03 Add design limitation for Sigfox Add model number WS2119-F0 Add 6.2. Package Marking 8. REGULATORY INFORMATION Revision D 0.1 D 0.2 D 0.3 D 0.4 D 0.5 D 0.6 D 0.7 ____________________________________________________________________________________ Copyright JORJIN TECHNOLOGIES INC. 2018 30 http://WWW.JORJIN.COM.TW
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-07-09 | 902.1375 ~ 904.6625 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2018-07-09
|
||||
1 2 | Applicant's complete, legal business name |
Jorjin Technologies Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0018187252
|
||||
1 2 | Physical Address |
17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST.
|
||||
1 2 |
New Taipei City, N/A 22161
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@siemic.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
WS2
|
||||
1 2 | Equipment Product Code |
WS2119A0
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A****** L****
|
||||
1 2 | Title |
Engineering Vice President
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
a******@jorjin.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/06/2019 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BLE and Sigfox wireless module | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Single Modular Approval | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
E**** L******
|
||||
1 2 | Telephone Number |
+886-********
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
e******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 902.13750000 | 904.66250000 | 0.3380000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0070000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC