|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2016-02-22
|
|
1 2
|
Applicant's complete, legal business name |
Jorjin Technologies Inc.
|
|
1 2
|
FCC Registration Number (FRN) |
0018187252
|
|
1 2
|
Physical Address |
17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST.
|
|
1 2
|
New Taipei City, N/A 22161
|
|
1 2
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
WS2
|
|
1 2
|
Equipment Product Code |
WG78SBV0
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
A****** L******
|
|
1 2
|
Title |
Engineering Vice President
|
|
1 2
|
Telephone Number |
+886-******** Extension:
|
|
1 2
|
Fax Number |
+886-********
|
|
1 2
|
E-mail |
a******@jorjin.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/18/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiFi and Bluetooth Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| 1 2 | Single Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee.
This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
SPORTON International Inc.
|
|
1 2
|
Name |
A**** C********
|
|
1 2
|
Telephone Number |
886-3******** Extension:
|
|
1 2
|
Fax Number |
886-3********
|
|
1 2
|
E-mail |
a******@sporton.com.tw
|
|